5200 801 with DTS-6012 DVD burn DVDs!

Similar Questions

• Satellite 5200 801: how to replace DVD burning drive?

  Hello
  A few days ago, I decided to replace my CD/DVD burning drive (burn DVD at 1 x) with a more faster and more modern.
  The problem is that, while turning on my laptop, it stops without any error message, as if she could not recognize the hard drive, so there is no professional Windows startup (problem of configuration master / slave?).
  I tried with two different burning drives and I also upgraded the BIOS of the laptop to version 1.40 (date 17/04/2003), but there was no result.
  Help me thanks
  Riccardo - Lecce - ITALY (South)

  You guessed it right,

  It's a question of master/slave/CS.
  Find out your old drive (firmware DI has something like 170) and try to locate the sense of them (current setting of M/S/CS) of it through the Internet on specific DVD player forums.

  Then determine WHAT type of disc, you will need to buy to make it work on your computer (or find the firmware suitable for do this... you'll need a different laptop that DOESN'T RECOGNIZE the DVD drive in the State, it is now).

  DVD Slimline portable computer readers usually do not come with a rider to make this adjustment (M/S/CS) on your own but are set with the internal firmware for this. There are other ways on how to get it to work (to force a shortcut on the back of the card), but I would not go for it if I were you.

  Concerning
  chain

• Satellite 5200-801 - arrangement of keys

  I have laptop satellite 5200 801 with reinstalled Windows Xp Pro. The operating system has been installed not support which was sold with my laptop, but separately CD. Now, I installed all the drivers. Everything works fine, except the keyboard.

  On my computer laptop keyboard keys @ and "are not on the same premises as in other keyboards. @ key is not between shift + 1 and shift + 3. But this is close the Enter key. So which keyboard to choose to use these keyboard shortcuts, as it is written on a keyboard? Now, I have English United States... Or maybe I need additional drivers or any application, where I can change the assignment of the keys?

  I will be judging for all your advice and assistance.

  Try again with British English.

• Satellite 5200-801 DVD-R/RW does not work!

  Hello
  I bought there are these laptop at least 2 1/2. I tried several times to get the DVD burning feature to work and was not wrong. Finally, a friend gave me a copy of Nero, and just like the other packages, I have used before, the system does not recognize the drive Virgin dvd - r.

  What could I do?
  Help, please!

  Thank you!
  Fidel

  Hi Fidel,

  I think that the 5200-801 use an optical drive Toshiba SD-R6012, who should be able to burn DVD-R and DVD - RW. It is possible that your player is not happy with the brand of blank media you're trying to use so I suggest you try a few different brands to see if it improves the situation.

  It is also possible that the device has a defect which is preventing them from actually identify the blank DVD when you insert it. Have you checked that the device will play pre-recorded media properly?

  Kind regards

• Problem with "unknown error" when burning DVD

  I'm having problems to burn a DVD after manufacturing and save the file to Windows Live Movie maker, I am trying to burn the DVD and it takes forever to get to 83,0% and stops before burning.  99%, stops the burn and I get an unspecified error.  I'm not very technical, trying to correct this error, please do it fast and easy for fix me!  Thank you

  Hi Ronda, P

  Welcome to the Microsoft answers site!

  (a) edition of windows vista you run on the computer?

  (b) how exactly you are trying to burn the DVD? What file format you are using?

  I firstly you suggests to save the project to your computer, and then try to burn on a DVD at a slower burning speed.

  Choose a speed slower burn to your DVD recorder as follows:

  1. return to the page Add images and videos on the DVD and then click on Options.

  2. in the DVD burning speed box, select medium or slow.

  Change-Windows-DVD-Maker-DVD-Video-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  If the problem persists, download the service pack 2 for windows vista on the computer

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  See the link below:

  Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".

  http://support.Microsoft.com/kb/949281

   

  For more information, please see the links below:

  Burn a DVD video disc

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  If you use windows media player, see the link below:
  Burn-a-CD-or-DVD-in-Windows-Media-Player http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help with creating Windows DVD longer is set to 16:9 but burn with 4:3

  Hello, I have a problem with the windows dvd marker. I burned two DVD until now and they all have two aspect ratio of 4:3 i have changed to 16:9 in the menu options, but each time its only 4:3. I tried to look on google how to fix this and I discovered that passing the AVI to WMV file type will be slove the problem. so my question is would this cause really work that I don't have much time to waste because the creation of dvd takes a long time to burn the dvd and I don't want to end up with 4:3, this time? so, if some can help me that would be very nice.

  Hi Akshaypatel,

  I suggest you follow the advice given by Mouneshwar R from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/problems-burning-a-DVD/08ed2466-d74c-4719-9fdb-54dcc8607e80

• The P7-1030 HP come with a cd/dvd lightscribe burner?

  The P7-1030 HP come with a cd/dvd lightscribe burner?

  Window 7 64 bit

  No changes have been made to the system before the broadcast took place.

  DoubleG2, welcome to the forum.

  Here are the Specifications of the product for the computer.  I don't see anywhere in the specifications that it mentions the ability Light Scribe.

  If your problem is solved, please click "accept as a Solution.

• Tecra S5-10 X - CD/DVD drive causes BSOD with new CD not burned.

  Hello!
  I have a laptop TECRA S5-10 X with windows XP (downgraded from Vista)

  My computer has trouble dealing with discs not burnt from the interface of microsoft. Make a right click on the drive takes more than 20 seconds to answer. After 2 - 3 times (sometimes right the first time) with or without ejecting the disc, I get a blue window of death "DRIVER_IRQL_NOT_LESS_OR_EQUAL".

  I tried the Toshiba DVD Diagnostics passes.
  I tried to uninstall and reinstall the driver.
  I tried to do repair for windows
  I installed service pack 3 for Windows XP
  I've updated the bios
  I've also updated the (Microsoft says it might be useful) NvIdia video card driver

  Nothing helps.

  I'll be very happy to get any other suggestions that will help me avoid a reinstallation of windows.

  Thax in advance

  H.

  I think you should try to remove the top and lowerfilters as Akuma said. This often solves problems with the CD/DVD drive.

  In the worst case, you must reinstall Windows.
  You also have this problem only with XP or Vista?

  I doubt that it is a hardware problem so reinstall Windows could solve it.

• How to install the recovery on 5200 satellite image using the DVD USB drive

  Hello

  I have a problem with a 5200-902 Satellite that has the corrupted DVD - ROM, and I can't find the room to change. (model DVD: uj - 810 b)
  But I would like to reinstall the laptop with the recovery CD and I will not be able to enter the BIOS to change the boot order and start with a USB DVD - ROM.
  I removed the HARD drive and reinstall the WXp Prof by another machine, but when I restart the 5200 I read this message "error nel caricamento del operating system."

  When turning I press F2-F10-F12 but if I select another boot device starting the laptop by network.
  Can you help me get this book by an external USB DVD-ROM?

  Thank you

  Andrea

  There is no test in the past, but I guess you have to do on the track:

  Start your laptop by using the MS-DOS boot disk
  Load the MS-DOS driver for external DVD drive to access
  Boot the CD of facilities here in the hope that it will market

• I have a Mac Book Pro with a CD/DVD drive.  I want to copy a home made DVD.  Is this possible with iMovie or another application?

  I have a Mac Book Pro with a CD/DVD drive.  I want to copy a home made DVD.  Is this possible with iMovie or another application?

  Look for the hand brake.

  It is a free application which can convert your DVD to QuickTime formats.

• My laptop has stopped communicating with my CD/DVD drive

  Why my laptop stopped communicating with my CD/DVD drive, D drive?  When I put a CD in the player it swirls, light comes on, but there is no indication on the screen. I bought an external CD/DVD drive that plugs into the USB port, but he did not see anyone.

  Hello

  Glad to know that you have addressed the issue. Your efforts to solve this problem is appreciated. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• can I pick up my dual boot after installing win xp on win 7. I lost my dual boot and my sytem starts with xp ony. I try to repair my system with win 7 dvd, but it only to get win 7.

  I have a system dual boot win - xp & win - 7. I reintall win - xp that disable my dual boot and I have win - xp.

  I'm trying to repair it with win 7 dvd but it only recover win - 7. can I pick up my dual boot? Help, please

  EasyBCD allows you to add the missing version of Windows in the start menu.

  EasyBCD (free for non-commercial use):
  http://NeoSmart.NET/DL.php?id=1
  http://NeoSmart.net/blog/2012/announcing-EasyBCD-2-2-Windows-8-dual-booting-and-more/

  J W Stuart: http://www.pagestart.com

• I have Acrobat 9 Pro.  Can I switch to Acrobat DC of that?  Also, if I buy the product with a CD/DVD, can I also download online.  I don't have a CD/DVD drive.

  I have Acrobat 9 Pro.  Can I switch to Acrobat DC of that?  Also, if I buy the product with a CD/DVD, can I also download online.  I don't have a CD/DVD drive.

  upgrade price is available for acrobat x and xi, Plans and prices | Adobe Acrobat DC

  If you have:	Upgrade to Acrobat Standard DC	Upgrade to Acrobat Pro DC
  Acrobat Standard DC		US $199. 00
  Acrobat X or XI Standard	US $139. 00	US $199. 00
  Acrobat X or XI Pro	US $139. 00	US $199. 00
  Acrobat X Suite	US $139. 00	US $199. 00

  Acrobat 9 and earlier versions, as well as Acrobat Reader, are not eligible for upgrades. Subscription customers are not eligible for the perpetual license price update. To access all the tools Acrobat and Document cloud services, consider a subscription Acrobat DC.

  and Yes, you can download.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.3|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• my up to date iMac can't read installing lightroom 5 dvd I received for Christmas, the dvd player works fine with the other dvd, is it possible to download the program with the serial number of the dvd?

  my up to date iMac can't read installing lightroom 5 dvd I received for Christmas, the dvd player works fine with the other dvd, is it possible to download the program with the serial number of the dvd?

  No need to worry about the disk version. He would just install an update anyway once it has been installed. Download from the link provided below and use the serial number, you need to activate.

  Updates

• Satellite 5200-801-indicator of battery flashes orange while dc is green

  I have SATELLITE 5200-801, the battery light flashes orange while the domain controller is green and the laptop works
  stop when it is off.
  the battery is empty.

  I can't boot from external USB cdrom to install windows as its internal DVD does not work

  Help, please

  > Ok I fix the battery problem was feeding me to change.
  Nice to hear that! :)

  > But I still can't start external USB cdrom
  Have you checked if your laptop computer (BIOS) supports booting from an external USB drive? I doubt it would be possible on old Satellite 5200. If you exchange your CD-ROM drive. You can look on eBay for the part of second hand, they are a little cheaper. :)