Satellite 5200-801 DVD-R/RW does not work!

Similar Questions

• Satellite 5200 903: Mini PCI card does not work

  Hello

  I am a user of one:
  Satellite 5200 903: P4 - M 2.2 / 256 + 256 DDR/60 GB/15 t SXGA + / DVD - R - RW / nV FX 5600/SFP/WIFI ready/XP

  My computer is a Toshiba Wirless lan Mini PCI Card.
  I installed the card a few years ago - everything worked great.
  In early 2006, I installed a new operating system (XP Pro + SP1, same system as before) because it was necessary.
  I installed all the drivers for the card of W - Lan, of course, the map worked in a good way (no driver incompatibility or other problems).
  But, and this is the reason of this topic here. It is not possible to connect my card to any hot spot. I tried with 2 different access points, but the result is the same. 'No connection Point found '.

  Does anyone have an idea of what to do or where I could look for failure? Is there maybe no special software required (I couldn't remember that I needed in my last installation special driver or software)

  If more information is needed, please let know me.

  (Sorry for the bad English, but it is not my first language.)

  THX for your help

  Hello Christian

  First your English is fine, and I'm sure that every user will understand what you want to describe.
  Back to your problem: the wireless card properly recognized and listed in the Device Manager?
  If so, please be sure that this card is enabled. Just that you should be able to see any wireless network.

  You n t need any special software. WIFI connection can be configured using settings in windows.

• Satellite L300-1CU-DVD-rom drive does not work in Win7

  Hello

  I have IMPROVED MY TOSHIBA Satellite L300-1CU FOR WIN 7 NOW cd rom (MAST * one UJ880AS DVD RAM) quit working. DRIVE USED DOOR OPEN WHEN I CLICK ON THE DRIVE IN EXPLORER (DVD RW drive (D :)) MESSAGE SAYS "PLEASE INSERT a DISK INTO DRIVE D:" what I'VE DONE.))

  I DELETE THE UPPER & LOWER EDITORS IN THE REGISTRY AND UNINSTALLED THE DRIVER DVD AND STARTED RE! NOTHING HAS WORKED, PLEASE COULD YOU HELP?

  SO THAT THE UPGRADE OF THE SYSTEM OF THE UNITED NATIONS INSTALLED TO VARIOUS PROGRAMS OF TOSHIBA... !

  Did you upgrade using the Toshiba upgrade kit or you installed Win7 clean and clean installation?
  Can you confirm that the optical disc drive works well with factory settings (Vista preinstalled original)?

• Satellite Pro L300: DVD drive eject does not & recognizes not all disks

  Satellite Pro L300 dvd player eject does not and does not recognize the disc that sits in.

  Please help someone,

  Thank you very much.

  What kind of help do you expect?

  You mean he s a software problem?

  I doubt it because it sounds like a mechanical hardware problem and in this case, the disk must be replaced.

  The laptop seems to be is not very old, and I think that the guarantee must be valid
  How about you, communicating with ASP in your country and ask for a replacement WEIRD?

  I think this helps

• Satellite A200: DVD/CD player does not work

  Excuse me
  I bought toshiba A200.
  After two weeks my DVD/CD drive does not work.
  So I deleted the a±ts driver and then I do not want to install the driver.
  Please help about this.

  Hello

  Don't be angry with me, but your ad is not a little clearer!

  However, the CD/DVD drive uses and supports the common drivers Windows Vista (or XP)!
  You n t need any special drivers to recognize the STRANGE

  In your case I would recommend going to the Device Manager and remove (uninstall) the CD/DVD drive.
  After this procedure, restart the laptop.
  The Vista operating system should recognize the new device and must be reinstalled the drivers automatically

• My DVD/CD drive does not work in Windows 8 Professional, and it ISN'T a hardware problem.

  My DVD/CD drive does not work in Windows 8 Professional with or without data or audio in it. However, if I turn off the PC with a bootable CD/DVD in there, the PC recognize the media and initiate the CD when turned on. This confirms that the DVD/CD drive actually works, but for some stupid reason, Microsoft Windows 8 Professional will not recognize the same DVD/CD player it loaded since! Thanks again Microsoft for another product of shit. Now, how are you going to fix this? And how are we supposed to run things such as WordPad or paint, etc. I predict that Windows 8 will fall faster than Windows Me!

  Hello

  To access all applications - just right-click anywhere on the splash screen - the lower right corner
  -All Apps - scroll to the left to learn more. You can pin any application to the start screen - right
  Click on - to start pine.

  It is a real help:

  Windows Store - Top free - Windows 8 Cheat Keys

  While on the screen type start - Help

  Or Win Key Q plus Apps search - help

  Or charms - Search - Apps - Help Menu

  After that the foregoing-> on left click-> Help and Support.

  ==================================

  Solution Windows 8 - left Center - learn more
  http://support.Microsoft.com/GP/Windows-8

  Meet Windows - a good start
  http://Windows.Microsoft.com/en-us/Windows-8/meet

  ====================================================
  ====================================================

  It was an upgrade of Windows 8 or you you destroy the old operating system and
  do a full install? Are there any error messages?
  
  Check the Compatibility Center to see if the drive is compatible:

  Windows Compatibility Center
  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

  Check with the manufacturer of the system support, their documentation online and pilot/firmaware,
  and ask questions in the forums (if any) on known problems. Some CD/DVD players are not
  Windows compatible 8.

  ---------------

  From the desktop - WINDOWS key + D while on the screen start to access the desktop:

  WINDOWS key + X or build the mouse in the lower left corner right click and corner - command prompt (ADMIN)

  Enter it below (or COPY and PASTE):

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  RESET
  (from AtishayMSFT)

  -------------------------------------------------------------------------------------

  -Use and you need to use it again after trying the methods below.

  What happens if a device is not installed correctly? (Run the hardware and devices Troubleshooter)
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Starting from the command prompt from the desktop - Windows key + X - (Admin)

  SFC/scannow
  (space between C and /)

  Then run CheckDisk execution - chkdsk /r (the / r includes the parameter f controls)

  Windows key + X - command prompt (Admin)

  Chkdsk /r
  (space between the k and /)

  Or run CheckDisk in Windows 8:

  Improve performance by optimizing your hard drive - see "to repair a drive.
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  --------------------------------

  Windows key + X - Control Panel

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack

  ====================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  =====================================

  Expert help with CD/DVD drive issues available here:

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• SlimType DVD DS8A8SH player does not work.

  * Original title: Slimtype DVD DS8A8SH

  I've NEVER used the DVD drive on this computer, two years, I have an installation DVD, and it does not work. Device is Slimtype DVD DS8A8SH

  I didn't have much luck at all with Windows 8.  Would be very helpful to get this cleared up.

  Hi James,

  -You get an error message when you plug in?

  I'll get you the link and see if that fixes the problem.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060/en-us

  Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, save restore register : //support.microsoft.com/kb/322756/ )

  Keep us informed on the status of the issue. We will be happy to help you.

• I bought the first Pro CC for 1 week. I tried to install Adobe Encore also because I do the DVD, but it does not work. What can I do? Help me!

  I bought Adobe first Pro CC for a week. I have to also install Adobe Encore because I do the DVD, but it does not work.

  I downloaded again, but a zip and I'm in a panic =)

  Help me please it is important!

  Moving to the cloud creative download & install

  Please see CS6 still not installed with creative cloud

  Hope that helps!

• Satellite A200 - 1VG - DVD RW drive does not

  Hi all
  Pls I need help with my laptop. The DVD player on my computer does not work correctly... It reads DVDs and CDs, but when I try to burn CDs or install a new program with a CD he gets like 97% then stops and an error message appears. It is sometimes said that the message could not be run due to errors.

  Also I keep getting disconnected the Internet every 10 minutes, please what can I do

  Finally, I want to know if I can install winXP because I do not like vista. Thank you

  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then, restart the device and wait until Windows has recognized and reinstalled the CD/DVD drive.

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• Satellite Pro M30 Win 7 - webcam does not work on msn messenger

  Hi all

  I have a Satellite Pro M30 Modell Nr.: PSM35E and just changed to Windows 7. But put him Nvidia card NVIDIA GeForceTM FX Go5200 Grafik 64 MB of RAM is not working properly.

  I could find a Vista driver and installed, have Aero + photos on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.

  Can someone help me?

  Thanks for your help

  Hello

  I m a bit confused; you have some problems with the graphics card or with the webcam?

  I assume you mean on external webcam connected to the USB port? Right?
  What happens if you connect the webcam to the laptop? Can win 7 recognize the device? Have you installed additional drivers for this webcam?
  Most of the time it s necessary to do so because I think that it s not Plug & Play device.

• Satellite Pro R50 - brightness control F3 does not work

  Hello

  I have a R50 Pro Satellite - bought just 1 month ago.

  Suddenly the order of function F3 to control light intensity has stopped working.

  The brightness can down with F2 function but F3 does not work

  F3 in the software and the operating system back to research, but do not work by pulling the brightness setting.

  So I'm stuck with my brightness down as low as it goes.

  I downloaded the latest driver for the feature key and installed, so it isn't that.

  Anyone got any help they can give?

  See you soon
  Craig

  As a temporary solution, you can change the brightness in the power settings.
  I really don't understand what the problem may be, but try to reinstall the utility system then Toshiba and Toshiba driver to feature key.

• Satellite NB10T-A-101 - mouse pad does not work

  I have a touch screen for Toshiba Satellite NB10T-A-101, the touch screen works very well but I use mostly the mouse pad I find using the slider easier.

  But recently my guarded cursor freezing for a second or two and then to spend once again, but now the mouse pad seems not working with the left and right click buttons work but not the touchpad.

  I made sure the touchpad is enabled in the mouse settings, so I don't really know what to do now.
  Any suggestions would be greatly appreciated
  Thank you

  Hello

  Have Hmm you also checked the FN + F5 key combination?
  This would enable and disable the touchpad as well.

  But from my point of view, it would be possible that the touchpad module is malfunctioning.
  I m thinking about the hardware malfunction because the touchpad buttons work and just touch the touch work area module doesn't correctly.

  Usually, if the touchpad would be handicapped by any software, both; as well as the touch buttons does not work.

• Satellite A-L50-19N - audio DTS does not work after update of Windows 10

  It is the most important thing in the drivers of toshiba, because without this driver, the sound is terrible...

  And now after the upgrade to 1511 he doesn't...

  I reinstalled IDT AUDIO latest driver is for 8.1 (2015 jan) and DTS Audio, which is for WIndows 10, but it does not work, I can it enable / disable EQs change, but nothing will change...
  
  WINDOWS 10 (1511)
  TOSHIBA SATELLITE L-50-A-19N

  DTS: 6.10.6491.0
  IDT: 1.2.41.0
  

  I fixed that, I updated its IDT Manager devices, and now Audio DTS driver works...

• External Combo CD-RW/DVD-ROM drive does not work with USB 1.1

  Hello world

  I have a problem with the PA3352E - 2 CD 2 CD-RW/DVD COMBO USB 2.0. A colleague is owner of this car and use it on a NB DellC610 with Windows XP on it. The problem is that the drive does not work with this type of nb (with a NB from Fujitsu-Siemens newest there no problems); There is always an error message about "surge." I think it has to do with the USB 1.1 because the player seems to be built for USB2.0. Is it possible to use this drive correctly with usb1.1 (ok, the flow is low, but more important is it works in general)? Unfortunately his nb will not work with USB 2.0...

  Thank you very much in advance.

  Kind regards
  Steffen Rieger

  Hello

  AFAIK this external must have a power adapter. You use it too? I'm not 100% sure, but there are difference how much power Gets the USB slot. Toshiba notebooks is around 500 my and some producers another laptops send between 300 and 500 my. The external device requires approximately 700 my.