6 ESXi, nVidia GRID, vCSA and problems of Console mouse

Similar Questions

• NVIDIA grid and Extreme Blast

  Hello community,

  How Extreme Blast will use the GRID engine to encode H264 display? Something like vGPU, so by VM or will use the GPU in the context of the hypervisor. Grid 2.0 or grid 1.0 is enough?

  Extreme blast will use material coding ability of the GPU (NVENC)

  Indeed, it bypasses the CPU for encoding, do all the work on the GPU itself.

  Each instance of vGPU will be able to access the encoder for all instances of vGPU Nvidia GRID will be able to use the Blast Extreme encoding hardware.

  All versions of GRID are supported, however there are a few benefits to GRID 2.0 that are

  1. More efficient and more recent SDK in GRID 2.x for access to resources of the encoder.
  2. Each GPU on the M6/60 Tesla has 6 x the capacity of encoding of the GPU on the K2. So, it's much more capacity on the new generation.
  3. The Maxwell series is also more features at the hardware level VMware could take advantage of the future including 4.4.4 subsampling of the chrominance and h.265 encode.
  4. NVIDIA will continue to increase the functionality used by Blast Extreme in GRID 2.x and later versions.

  If you K1/K2 today you will be able to deploy Extreme Blast and shoot out of encoding material without needing to go to the GRID 2.x, however future enhancements to Nvidia will appear in the new platform, and you get also much better scalability of the architecture of Maxwell of last generation.

• I'm having a problem with my screen of harvest... A small grid appears and I can't remove... Help?

  My harvest screen has a fine grid (about 1/2 in.) covering the entire field.  I use the third screen but can activate when I want to and that always works but whenever I load a picture of the small grid appears and I can't remove... Help.

  It is possible, that you have the grid in pixels or just grid shows?  Find in the view menu.

  

  -Christmas

• Clarification of grid Plug-and-Play (GPnP)

  I lu something on this introduced feature in Oracle 11 g R2 , I have not very clear that you can get When you add a new node to the cluster is configured automatically.
  I understand that using GNS , you can help reduce the cost of Management of IPs et is used with a DHCP server Server GNS sevice . But not if there is more feature that allows for a more powerful Management software in the installation management of ASM or RDBMS instances on the new server cluster .
  
  I would like to pourrait clarify if what is called Grid Plug and play is the GNS ()Grid naming Service) features?
  Or is it more Dynamics Management capacity of ?
  What role the negotiators, alias profile.xml profile file?
  
  Thank you.
  Best regards.
  Arturo
  
  

  Hello, Arturo.

  Negotiators and GNS are independent of each other

  From 11 GR 2 onwards, files with right to vote can be hosted on ASM. And the upcoming ASM to cssd demon. And for the cssd start the cluster needs to access files with right to vote.

  These voting files location information is stored in the profile of negotiators (grid Plug n Play) file.

  GNS, is for the resolution of the cluster name. For customers outside the cluster to find the virtual servers in the cluster, we provide a Naming Service (GNS) grid. It works with any level superior DNS to provide names can be resolved to external customers. DHCP provides dynamic configuration of the IP address of hosts, but does not provide a good way to produce names which are useful to external clients. Accordingly, it has been rare in the server complex. In Oracle 11g release 2 Clusterware (11.2), this problem is solved by providing clusterwares own service name in the cluster and this connection resolution DNS that is visible to customers.

  Ref: DNS and DHCP configuration example of Infrastructure of grid GNS (Doc ID 946452.1)

  Kind regards

  Vautrin - Oracle

• GPU, NVIDIA 8800 GTX and PhysX, Vista SP 2 32 bits

  I have a large part of the informtion even posted in the forum user of NVIDIA as well in the hope of resolving my problem. My specific concern for this post is to know how to get my Dell computer with a PhysX card to play nice with Photoshop CS4.

  I have the following:
  -Dell XPS 720
  -Vista SP2 - 32-bit
  -Nvidia GeForce 8800 GTX
  -PCI Express 768 MB dual DVI - HD TV

  -Photoshop CS4

  
  I'm picky with my NVidia GeForce 8800 GTX and PhysX drivers so what get Photoshop CS4 to recognize GPU options. I'd appreciate any help.

  Here's what I've done so far:

  (1) reinstalled Vista SP2 - 32-bit

  (2) installed the latest NVidia driver file: 186.18_desktop_win7_winvista_32bit_english_whql.exe. I double clicked on the file and follow the guests to install the drivers. In programs and features, I had listed: NVIDIA drivers, NVIDIA PhysX and NVIDIA Stereoscopic 3D drivers.

  (3) I went to the NVIDIA Control Panel and make sure that 1) the GPU of updated PhysX acceleration: enabled; (2) (select a SLI configuration: SLI enable (recommended); and 3), select the SLI focus display: specificities of the Dell monitor.

  (4) I noticed that when I went to my device manager, I had a non-registered PCI device. In the past, he indicated that the PhysX card is not registered correctly. See image:

  http://i43.Tinypic.com/23tmgpi.jpg (tried incorporation pic with code bb without success)

  (5) checked Photoshop CS4, Edit | Preferences | Performance - Settings GPU: No. GPU Options available with Photoshop Standard. The greyed out text is enable OpenGL drawing and advanced settings.

  (6) I then tried just the PhysX driver itself: PhysX_9.09.0428_SystemSoftware.exe. When I double click top, he deleted the previous driver. And when I double clicked on it again, it installed the PhysX driver.

  (7) always had problems with my PCI Device Manager which indicated that a PCI device was not recorded. And Photoshop CS4 did not cooperate.

  (8) went to the Dell site and downloaded the driver Ageia: R167580.exe. I doubled clicked on it to expand the files that have been placed in the: C:\dell\drivers\R167580. I then went to Device Manager and right mouse click the PCI device to replace the driver. I have provided the previous path. In Device Manager, the PCI problem disappeared.

  (9) the Photoshop problem remained. I made sure that the NVIDIA Control Panel was enabled acceleration. I installed once more the PhysX driver: PhysX_9.09.0428_SystemSoftware.exe. None of these actions had Photoshop to cooperate.

  (10) tried various solutions on the Adobe Photoshop page: http://kb2.adobe.com/cps/404/kb404898.html#finddriver

  (a) option 2 - Reset preferences
  (b) option 8 - disabled Vista Aero

  None of these worked.

  I have a few questions:

  (1) why step 2 was not properly installed all the drivers for my NVIDIA GTX and PhysX card? That's why Device Manager showed a PCI device problem?

  (2) what is the best way to install the drivers for my hardware?

  (3) why was it necessary to use the Ageia from Dell driver to overcome the Device Manager "problem"?

  (4) can I test if my PhysX card is 'active' or 'seen' by other applications or not? I'm not a gamer, so the only application I know is my Photoshop CS4. It is not 'see' the PhysX card.

  (5) how Photoshop CS4 to play nice with my PhysX card?

  (1) hell knows, that's between you and your system

  (2) just install them normally by double-clicking the .exe

  (3) manufacturers sometimes goofy to material things so that you have special drivers

  Photoshop 4) can't see no PhysX card because it does not use it

  (5) how about you pull your system?

  Why do you need to use a dedicated card PhysX if you're not game? Photoshop is known to have sometimes problems with multi-gpu solutions and your configuration falls into this category because you have active SLi

• A way to find my previous questions and problem reports?

  Is it possible on this forum to find my previous questions and problem reports? Since viewing a question earlier today, I found the greater PART of the answer and would like to add that I found the question, without waiting for someone else to answer. I can't remember the title I gave to the previous question, or I would use this title in the search for it.

  Information troubleshooting below is most relevant to a previous problem that this question.

  Contributions my link on main page of the forum should display a list of all your job offers.

  See the search in this forum for your username under "posed by".

• Webstedet har fundet and problem og kan ikke Vice den side, of the forsoger of the som to fa vist. Nedenstaende muligheder kan muligvis hjaelpe dig med at November problemet.

  Windows Update

  Webstedet har fundet and problem og kan ikke Vice den side, of the forsoger of the som to fa vist. Nedenstaende muligheder kan muligvis hjaelpe dig med at November problemet.

  ? ER der en losning

  Unfortunately, disse men for a screw kun fransk pa support. Vaelg venligst said lands him: http://support.microsoft.com/common/international.aspx> og klikke pa PIL to support pa said sprog.

  ://Answers.Microsoft.com/en-US/Windows/Forum/windows_xp-windows_update/Windows-Updates/a19f6b44-74c9-48E0-b77d-2bc5f1b80c27 http://www.microsofttranslator.com/BV.aspx?from=en&to=da&a=http

  UTC/GMT is 12:10 on Sunday, November 11, 2012

• Microsoft It - fix diagnose and repair Windows and problems would not install on my computer. He said the chain was not in the right format. Clues?

  I installed Microsoft Fix It on my computer (MSXP). The diagnosis and repair of the Windows files and problems would not install on my computer. He said the chain was not in the right format.  Clues?

  Hi Kathryn1713,

  ·         You are not able to run the Microsoft Fixit tool?

  If so, you can post your query on the Forums of Microsoft Fixit. Please see the following link for the same.

  Microsoft Fix Center - NO support general questions Forum

• I get messages that support and problems Windows has stopped working. and also that I have no more memory on line 2. What can I do to fix this?

  I get messages that support and problems Windows has stopped working.  I told myself that I will advise if a solution is found, I get another box saying that I have to close becausse that Windows does not work.  I also get messages that I have not more memory on line 2.  What can I do to fix this?

  Hello

  1. could you give us the exact error message?
  2. Once you get this error message? This is when using Internet Explorer?

  In the meantime, check out the articles below and check. Try to increase the size of pagefile.sys and check.
  http://support.Microsoft.com/kb/2267427

  I hope this helps.

• Problems with my mouse, and have not been able to find a solution to the research on various forums.

  Original title: mouse problems

  I have problems with my mouse and have not been able to find a solution to the research on various forums. Here are the symptoms:

  1. you must click several times to get the menus to open. Sometimes they are not just and sometimes they open with a single click flash but do not stick until I clicked several times.

  2 several times the menu drop down and seem to become transparent (not in looks) because when I click on something on the menu, he actually selects everything that is behind the menu drop down. For example, if I'm in powerpoint and you select an item in edit mode, it might work and here again he can just select the slideview behind the menu and expand. Or well, if I'm on a Web site, such as Facebook, and I chose to close the session, rather than enable the disconnection of the key, he chooses some ad is behind the part of the menu and redirects the page of this Web site.

  3. when I try to select a Word, words or sections as paragraphs, it performs several different things: continually select as soon as I let go of the mouse button, the jumps of color selection in another part of the document, or deselects the part of the text before I even let go of the mouse button.

  Here is what I tried:

  1. I had originally a usb wireless mouse. I changed the batteries and then got a new. Now I use a wired mouse.

  2 make sure all updates for Windows and Office 2010 are updated.

  3 has tried to update the drivers mouse, says that it is up-to-date. He restored, did not work. Uninstalled and restarted.

  4 Ran Windows Security Essential and Malwarebytes - found nothing.

  5. ensure that all the Toshiba updates were up-to-date.

  I don't know how the word this issue properly in order to find information about it. Everything I typed in search engines brings me other problems unrelated to this one.

  I am running W7 64 x Home Premium SP1, SP2 MS 2010 with a mouse Dell; Toshiba Satellite C655

  Well I have stumbled on the fix... looks like there was a problem with the HID-compliant mouse. The convenience store hardware detected and solved the problem. Everything seems to work properly again.

• I have a problem with the mouse cursor moving left to right and not conversely when switching between screens.

  Original title: change the direction of the mouse moves from the main screen to the external monitor

  My mouse movements from left to right when moving from one screen to the other, I want that he move right left how do that change

  Hi Jayson Bourne,

  Welcome to the Microsoft community. According to the description of problem cursor mouse moves from left to right and not vice versa when switching between screens. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the mouse?

  I'll help you with this problem. I suggest you follow these methods.

  Method 1: Follow the steps in the article.

  Change the settings of the mouse

  Method 2: Update the latest drivers/software for the mouse.

  Updated a hardware driver that is not working properly

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• Very new to photoshop, I try to make changes to a photo and set up as a dynamic object, but after the selection of dynamic object, the grid appears and my photo dissppears

  Very new to photoshop, I try to make changes to a photo and set up as a dynamic object, but after the selection of dynamic object, the grid appears and my photo dissppears

  Well, something's wrong with Photoshop. Try to close Photoshop, and then press Command + Option + shift as you restart Photoshop. You will be asked to clear the Photoshop preferences. ATTENTION: you will lose all current preferences.

• VCSA and update Manager

  Update Manager updates the vCSA device?   I swore that I read that he cannot for the time being, but I don't remember the documentation nor do I find.  If anyone knows, please let me know or point me to the documentation saying it is or is not possible.

  I know VUM does not come with the vCSA and I also know that it is always necessary to use Windows to run stand-alone.  You don't know everything just not if the autonomous will update the device.

  THX.

  Hi Larry,

  Good question. As far as I know, the update/upgrade of the VCSA is build-in the camera and you need to update/upgrade from there. Check that this upgrade procedure document.

  Kind regards.

• Help with grid fluid and models

  I created a model of fluid grid. The model has all the Visual elements fluid grid as the layout grid and HUDs according to me, they are called. When I created a new page from the template he loses all fluid grid assets and the button of the page at the top of the window layout grid is gone.

  Is it possible to obtain liquid assets grid to work on these new pages?

  Why is it important?  I want to say that your fluid layout grid should have perfected for the totality of your site until you did it in a Template.dwt, right?  She, it is the expected workflow. While the phase of your project is completed.  The only thing left now is to create child pages and add content to your editable regions.

  Nancy O.

• Oracle Grid Infrastructure and ASM Tech Supprot

  Purchase given the Support of Oracle grid Infrastructure and ASM. Is there a site web/link I can go?

  Hello

  ASM is part of the database. So you get the support with the RDBMS product.

  Concerning
  Sebastian