Oracle Grid Infrastructure and ASM Tech Supprot
Purchase given the Support of Oracle grid Infrastructure and ASM. Is there a site web/link I can go?Hello
ASM is part of the database. So you get the support with the RDBMS product.
Concerning
Sebastian
Tags: Database
Similar Questions
-
ASMCA need to Oracle Grid Infrastructure Configuration ASM - 11 GR 2 on SLES11
Hello
I try to install 11 GR 2 ASM on a new server SLES11. So far I have correctly installed the database software, but the bad now when it comes to install the grid Infrastructure.
Partitioning and stamping the discs as ASM disks worked fine, oracleasm listdisks give me my disknames as output.
So far so good - in the setup of the network infrastructure, I chose "install and configure the network for a stand-alone server infrastructure."
The installation worked, I executed the script root.sh without any problems - but ASMCA configuration failed with the following error:
NEWS: Read: error detection of Oracle Grid Infrastructure. ASMCA needs Oracle Grid Infrastructure Configuration ASM.
Unfortunately I couldn't find much about it on the internet - I'm very stuck here...
Any ideas?
AndreaHello
There must be a variable set of environment that should not be there.
You can connect with your normal user (without the oraenv) and do a 'env' and provide your environment variables.I suppose that you have set a parameter of ORA_NLS or something similar, that should not be there.
Concerning
Sebastian -
ASMCA needs Oracle Grid Infrastructure Configuration ASM
Hello
I try to install DSO 11 GR 2 on RHEL5. I use VMWare Workstation.
I have already installed Oracle database and software infrastructure of grid on this machine. During the installation of network infrastructure, I chose only the software grid Infrastructure.
Once this succeeded, I'm trying to create instance ASM using the asmca.
About the discs, I use raw devices. I created a virtual disk that I have partitioned but have not formatted. Did this to create the raw device
[root@localhost sysconfig] # / bin / / dev/raw/raw1 gross/dev/sdb
/ dev/RAW/raw1: linked main 8, minor of 16
and added
ACTION == "add", KERNEL == "PSD", RUN += "/ bin/raw/dev/raw/raw1 %N".
at /etc/udev/rules.d/60-raw.rules
Then I tried to create the disc, but it failed. So I did the following steps to resolve this
[software root@dhcppc2] # /etc/init.d/oracleasm createdisk VOL1/dev/sdb
Disc marking 'VOL1' as an ASM drive: [FAILURE]
[oracle@oracle11gR2 grid] $ tail-f/var/log/oracleasm
Device "/ dev/sdb" is not a partition
To solve this problem
[root@localhost ~] # / usr/sbin/asmtool - C-l/dev/oracleasm - s/dev/sdb VOL1 n - force = yes
asmtool: device "/ dev/sdb" is not a partition
asmtool: continue anyway
I am now able to view the asmdisk to the listdisks option.
Have defined following environment variables before you run the asmca
[oracle@oracle11gR2 ~] $ export ORACLE_HOME=/u01/app/oracle/product/11.2.0/Grid
[oracle@oracle11gR2 ~] $ export PATH=/u01/app/oracle/product/11.2.0/Grid/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
When I run ASMCA I am facing this error - Oralce grid infrastructure is not configured correctly. ASMCA needs Oracle Grid Infrastructure Configuration ASM
Any thoughts?If it is not clear what you are doing and how, or two things.
(1) if I remember correctly, the raw device support is he more RHEL5, OEL5 and 11.2 oracle db. You must use block devices, set up with the ASMLIb to use for ASM.(2) did the ASMCA successfully configured when you installed the grid Infrastructure?
I have a very strong hunch that your installation is not correct. I suggest that clear you all, then reboot.
HTH
Aman... -
Installable for Oracle grid infrastructure restart alone (No. ASM)?
Hello
Oracle Grid Infrastructure can be installed for its features Oracle restart only? that is, no. DSO, this box uses RAID 5 only local file systems.
It is a self-contained system of RHEL 5 32-bit with a database of Oracle 10 g 2 already installed that I intend to move to GR 11, 2. Just experimenting with the installation of infrastructure network for only its ability to restart. There is nothing out there that I found which addresses this other doc Oracle claiming that the Infrastructure must be installed if I want to use ASM or Oracle Restart.
I am currently in the Setup in a software installation only in the meantime my SysAdmin run the root.sh script, but looking at this script, it seems that he might try to do things with the CRS, voting files and others, that do not exist.
Thank you!
-JonHi Erik,
Oracle Grid Infrastructure can be installed for its features Oracle restart only?
Yes... you can do this installation software only
I am currently in the Setup in a software installation only in the meantime my SysAdmin run the root.sh script, but looking at this script, it seems that he might try to do things with the CRS, voting files and others, that do not exist.
Don't worry about that... at the end of the script is running root.sh will report a procedure to configure only Oracle Restart.
Only this 'ora.evmd' resource is displayed online.
Kind regards
Levi Pereira -
Oracle Grid Infrastructure for a stand-alone server - licensing
Is a separate license required for the Oracle Network Infrastructure when you use Oracle Grid Infrastructure for a stand-alone Servicer? I compare it to non-GI installation where the database using cooked file systems for storage, and so only the database is allowed.
Env:
- Oracle 11 g grid infrastructure
- Standalone database: Oracle 11.2.0.4 64-bit Enterprise Edition
- Windows Server 2008 Standard
Thanks for the advice / references.
Tony
As other posters have suggested, better check with Oracle.
There is a good reference here in the docs of Oracle Online license, https://docs.oracle.com/cd/E18248_01/doc/license.112/e10594.pdf
in respect of infrastructure of grid / search "components of Oracle Grid Infrastructure.
It would be useful to check around popularity of ASM / GI on windows. I worked between some flavors of * nix & Windows, ASM is great, but not a huge number of Windows installs that I have come across seem to use it. I'd certainly * nix however if (even if not!) considering the DSO. Sit together much cleaner
-
Oracle grid infrastructure for a standalone server download
Hello
I am trying to install Oracle 11 g, but he says that if I want to use ASM and oracle Restart then I must intsaller Oracle grid infrastructure for a stand-alone server.
I am doing this installation on my pc running Windows 7 to ensure that it works at home, however, I downloaded the database 11g Enterprise/Standard editions but I find no download for the Oracle network for a stand-alone server infrastructure.
Can anyone help please because I am confused here?
I even went in the designer of my 11 g download directory and there is no folder called cluster or grid or whatever it is.
Thanks in advance!When you go to OTN to download the software, click on the 'See all' next to the platform that you download and you will see the links for GRID.
However, you need not install the GRID if you plan to use ASM and reboot.
-
Installation of the R 11.2 grid Infrastructure and RAC on AIX 7.1
By referring to:
Manual 'Oracle Grid Infrastructure -
"Installation Guide 11 g Release 2 (11.2) for AIX on POWER Systems (64-Bit).
E48294- 01Chapter 2.7, "id Software".
requirements '.Q: as prerequisites to IM and
Installation of RAC, we ABSOLUTELY NEED to have installed-ADA (OC PowerAda 5.5 systems),
-Pro * Fortran (IBM XL Fortran v. 11.1 April)
2008 MFPS for AIX)
-Pro * COBOL and-Oracle Messaging Gateway (IBM WebSphere MQ
V6.0.2.0)?We wish to avoid
unnecessary scopes during this installation.The overview of the project:
We run Oracle EBS R 12.1.3 on RDBMS
11.2.0.3 on AIX 6.1, simple installation of the enclosure.Plan is a proof of concept and
migration/switch to: two new boxes AIX 7.1, install GI 11g R2, RAC and set up
OEBS to run in clustered environment. RDBMS and EBS will be cloned toexisting environment.
Thx a lot!
-
Oracle Grid Infrastructure PSU 11.2.0.4.3 (18706472)
Hello
I applied Oracle Grid Infrastructure PSU 11.2.0.4.3 (18706472) for Linux - x 86-64 but how to verify that the database has been patch AND IM has been fixed?
Normally, I would do the following:
. / opatch lsinventory-bugs_fixed | EGEP-i ' PSU | DATABASE UPDATE PATCH OF THE SET"
and
. / opatch lsinventory-bugs_fixed-oh/u01/app/grip | EGEP-i 'PATCH UPDATE SET GRID INFRASTRUCTURE.
The first command shows that DATABASE UPDATE SET PATCH 11.2.0.4.3 has been applied
However, the second command shows nothing.
Thank you.
Hello
It looks like the 11.2.0.4 it has been renamed OCW (Oracle Clusterware PSU):
What is the patches under 11.2.0.4 or 12 c GI PSU (Doc ID 1595371.1)
11.2.0.4.x Grid Infrastructure known PSU issues (Doc ID 1912699.1)
Although not the same, but here is the versions that I got on Exadata:
[oracle@exadata01 OPatch] $. / lspatches opatch
16937759; QUARTERLY PATCH DISKMON FOR EXADATA (JUL 2013 - 11.2.0.3.20): (16937759)
16619898; QUARTERLY CRS PATCH FOR EXADATA (JUL 2013 - 11.2.0.3.20): (16619898)
16869205; QUARTERLY DATABASE PATCH FOR EXADATA (JUL 2013 - 11.2.0.3.20): (16869205)
[oracle@exadata02 OPatch] $. / lspatches opatch
18522514; ACFS SET UPDATE: 11.2.0.4.3 (18522514)
18522515; OCW Patch Set update: 11.2.0.4.3 (18522515)
18825509; DATABASE PATCH FOR EXADATA (JUL2014 - 11.2.0.4.9): (18825509)
Kind regards
EVS
-
Question about uninstalling Oracle Grid Infrastructure software
Hello! I create a new cluster of CARS on IBM Power 7 server running AIX 6.1. I installed grid Infrastructure 11.2.0.3 as a 'practice' race, but I would like to make a few changes. I remember reading about a year on the Oracle uninstall utility 11g. Although it is installed as part of the software, it was recommended at that time to download the OTN deinstall utility.That it is always recommended, or can I just run the deinstall utility in my house grid Infrastructure?
Thank you
Mark
Hello
Please check below notes:
11 GR 2 CARS: how re - install the grid Infrastructure without disrupting the facilities of RDBMS. [1276975.1 ID]
Oracle has uninstall utility - 11 g R2 [ID 886184.1]
Way of GR 11, 2 failed Installation of infrastructure (CRS) grid [ID 942166.1]
11 GR 2 grid infrastructure - uninstall the rootcrs.pl script failed [1174384.1 ID]
And please read this link: How to change or uninstall Oracle Grid Infrastructure
Thank you
-
Oracle Grid infrastructure installation tutorial
Dear friends that can help me by providing a link to the Oracle Grid infrastructure installation
Tutorial. I need description of installation procedure with the GNS, SCAN as well as DNS and DHCP
configuration for grid below. Already, I've searched the NET and cannot find the same comprehensive instructions.
I want to just compare my and other ways to facilities.
I hope to see your comments soon.
Thanks in advanceHello
See the blog post by Glen Jilevski:
http://gjilevski.WordPress.com/2011/10/05/build-two-node-Oracle-RAC-11gr2-11-2-0-3-with-GNS-DNS-DHCP-and-haip/This could be useful :)
Thank you
A H E E R X -
root.sh failure in ORACLE GRID INFRASTRUCTURE 11.2
Can anyone help identify the problem that I run the root.sh installation & configuration ORACLE GRID INFRASTRUCTURE for a node 2 (rhel5) 11.2.
I got the following in node 1 error message:
===================================================
PROT-1: failed to initialize ocrconfig
Return code of 255 (65280) of control: / u01/app/grid_home/bin/ocrconfig-upgrading to oracle dba
Cannot create the Oracle Cluster registry configuration, rc 255
CRS-2500: Can not stop resource 'ora.crsd' as it is not executed
CRS-4000: Stop command failed, or completed with errors.
Return code of 1 (256) of control: / u01/app/grid_home/bin/crsctl stop resource ora.crsd - init
Stop resource ' ora.crsd - init ' failed
Cannot stop CRSD
===================================================
I use EMC storage for the cluster.
I checked all permissions and they are fine, 'root' has access to all folders 'oracle' and vice versa. all the clatter of SSH works as well.
Kind regards
LilyYou can post your OCRCONFIG errors? It's under $GRID_HOME/log /
/client/ocrconfig*.log -
Question on Oracle Grid Infrastructure
Good evening
I wanted to download "Oracle Grid Infrastructure" for Windows. I have been everywhere in the Oracle site, google for it but can't find where is the download for installation.
Google led me to this page:
http://www.Oracle.com/technetwork/database/Enterprise-Edition/downloads/112010-win32soft-098987.html
But I do not see the installer it grid Infrastructure.
If someone could provide the link where I can download a Windows standalone server installation, I would appreciate it a lot.
Thank you for your help,
John.http://www.Oracle.com/technetwork/OEM/grid-control/downloads/index.html
-
Does oracle grid infrastructure is included in edition standard oracle
Hello
In edition standard oracle, consists of CARS with 2 nodes.
It includes oracle network infrastructure?
Thanks ivw
Yes. as long as you stay in license guidelines. All freely available on the documentation.
-
error during installation of Oracle Grid Infrastructure Oracle Linux 6.2 64-bit
I am new to the Installation of Oracle RAC. I try to install Oracle RAC on vmware 11R2. I checked all prerequisites so far and I'm sure I went through all the components mentioned in the documents of the Oracle. It doesn't matter what I do, here is the error. Do not know how to solve. Please help me.
ID@racnode2 Desktop] $ cd/u02/linux_11gR2_grid/grid /.
[grid@racnode2 grid] $. / runInstaller
From Oracle Universal Installer...
Check the Temp space: must be greater than 80 MB. Real 29000 MB
Past
Check the swap space: must be greater than 150 MB. Real 2999 MB
Past
Monitor: must be configured to display at least 256 colors. 16777216 real past
Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2013-09-22_04-04-10 AM. Please wait...
[grid@racnode2 grid] $ Exception in thread "main" java.lang.UnsatisfiedLinkError:
/tmp/OraInstall2013-09-22_04-04-10AM/JDK/JRE/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: no such file or directory
in java.lang.ClassLoader$ NativeLibrary.load (Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1647)
at java.lang.Runtime.load0
.............................
...............................
..............................
Hi Harold,.
You have the OS installation CD, if so go to the packages directory and you will find the RPM that I mentioned.
If you do not have the CD of the OS, then get the number of link:
http://public-yum.Oracle.com/repo/OracleLinux/OL6/2/base/x86_64/
Thank you &
Best regards
-
Hello!
My name is Eduardo and I m trying to install (for trial now) a clean CARS in the system of two nodes. The problem (now) appears when I run the root.sh on the first node, allways I ve received the same script: "CLSRSC-1003: could not start the OC4J resource."
This isn´t the first time I tried, I tried the same before installation with a 6.5 CentOS and 5.11 and I ve got the same error each time.
I ve configured bash_profile oracle, to the limits of oracle, the selinux is disabled, the correct values for the/etc/sysctl.con file, preinstallation, etc..
I don't know what else can be wrong... Can you help me please? I ve lost several hours looking for a solution in a large number of Articles/pages/oracle community...
Thank you very much!
Greetings from the Spain!
Hello
Will you please check/etc/hosts and ensure under entry is there.oc4j uses local host
127.0.0.1 localhost.localdomain localhost
Concerning
Robin
Maybe you are looking for
-
After sorting the bookmarks are not sorted. Why?
After finding the sort under view feature not organize, I have them sorted by alphabetical order. I did this several times using the alphabetical feature and functionality from A to Z, but they come back in a random order in the bookmarks Show menu a
-
HP Pavilion a1310y: can not find the drivers for Pavilion a1310y on Win 7
Hello worldI installed my mother HP Pavilion a1310y to Windows 7 Pro. It works great except for what seems to me to be pilots. The audio does not work and the screen is the thing where everything is bigger and looks like he needs an update.On-site HP
-
read png: transparency does not work very well
IM programatically loading PNG images and put them in a picture box. However, I see big differences when I programmatically load a picture or just drag it to the front of windwos Explorer; See attached picture. I can change the loaded PNG transparenc
-
I think that there is a keyboard shortcut to change upper to lower & lower to uppercase police... What is it please!
-
After upgrading my internet at roadrunner turbo I hade to upgrade my old linksys router to get the higher speeds and now my xbox will not connect to my pc? the xbox is simply not the pc internet? Anyone know why this might be? Thank you Gary