6 months Aspire one D270, "plug-in, do not load ' help me!

Similar Questions

• Acer Aspire One D270 does not turn on!

  Have an Acer Aspire One D270. I've had for about 4-5 months now. Today it suddenly has stopped and it won't turn on. I left for a few hours but nothing yet. I thought it was a battery problem but the charging light does not turn. I know for sure, it is not the charger. Please help me! Thanks in advance!

  [Moved from comments]

  Nevermind found the solution...                                                                                                              Follow the steps below. (Please be careful when you handle the electrical components of the computer such as batteries and power adapters)

  • Remove the battery and hold the power for a few seconds (drain any remaining power)
  • Turning on the computer without the battery with the AC adapter is plugged in.
  • Wait a few seconds and then reconnect the battery

  After a few tries the computer should start normally supported. The amber battery stops flashing and turns green when fully charged.

• Acer Aspire One d270 ram upgrade

  I recently bought a netbook Acer Aspire One D270-1806. It comes with 1 GB of Ram.

  I'm looking for this move to 2 GB. I could not find a service manual for this netbook.

  Can someone point me in the right direction?

  I've seen some posts saying that the upgrade of ram D270 was deemed not user replaceable. Although Acer may have tried not user replaceable; It is altogether. It was so easy. I went on the standard of 1 GB of Ram for a 2 GB key in about 10 minutes.

  Here's the video I used:

  http://www.YouTube.com/watch?v=vEcIer28aNc

• Acer aspire 5600U, auto repair, windows could not load correctly, restore is not started

  Original title: Mr

  Acer aspire 5600U, auto repair, windows could not load correctly, restore is not started

  Hello

  Here are the instructions Acer for recovery to factory settings, new condition.

  Select Windows 8.1 it.

  "Using Acer eRecovery application to restore your system or to create a recovery media.

  http://Acer.custhelp.com/app/answers/detail/A_ID/29934/~/use-Acer-eRecovery-application-to-restore-your-system-or-create-recovery-media

  ACERS use these keys for years.

  http://Acer.custhelp.com/app/answers/detail/A_ID/35232/session/L2F2LzEvdGltZS8xNDQ0ODg5NTczL3NpZC9jRmhXNC15bQ%3D%3D

  See you soon.

• 35 Firefox plug-ins are not loading.

  Recently updated Ghostery and since then I've lost the ability to watch videos on all pages. I tried a lot of solutions to correct this. None worked. The only solution that which was left was me so said they start for EACH Firefox problem is in 'safe mode' or update Firefox each moderator of Mozilla. I did a refresh by accident. But always had problems even after only 3 modules. And I went ham on Firefox and delete everything off my deleted pc the Mozilla folder after that I uninstalled Firefox. Then I went to load Firefox from the ground upward.

  Well, since I did it miss me ALL my plug-ins. So I updated adobe... nothing. I uninstalled Adobe Flash Player and it reloaded. Nothing. I did the same thing for VLC. Nothing.

  2 Plug-ins that are listed are from the folder I added an old Firefox data I saved. Question is on Firefox 35.0.1 why plug-ins are not installed?

  Solved.

  What Did I Do? I refreshed Firefox...

  (1) pluginreg.dat deleted
  (2) threw in the folder an old copy of pluginreg.dat from when he worked
  restarting and it picked up everything.

  Just having now question flash crashing on the pages as soon as the page loads.

• Our plug-in did not load with Acrobat 9 Pro when you open the PDF from outlook?

  We have a plug-in for Acrobat Pro 9 and 10.  The plug-in will be responsible if a local pdf file opening.  However, when you try to open the file PDF of Outlook 2013 (x 86), our plug-in not was not loaded.  Any suggestions?

  Thank you
  Weiqun

  In any case, I found the answer myself by using the process monitor.  The reason for our plugin dest does not work because it has been installed in a subdirectory under the plug-in.  Once I moved the plugin directly under the plug-ins directory, the plug-in has been loaded correctly.

  Process monitor, when you load Acrobat from Outlook, Acrobat tries to enumerate all subdirectories under the plug-in, and it finds the api (for example \sample\sample.api).  But somehow he will attempt to create the file directly under the plugin: C:\Program Files (x 86) \Adobe\Acrobat 9.0\Acrobat\plug_ins\sample.api and get the error NAME_NOT_FOUND.

• Aspire one d270-1607

  win7 32 bit starter, a memory, can move us on to win7 home prem 64-bit and 2 GB of memory

  It is possible, Yes.

  I think that the maximum RAM for the D270 series is 2 GB SDRAM, DDR3-1066 MHz / PC3-8500.

• First install Aspire one D270 stuck on configuring custom settings

  maya saying to install Windows installation instructions take 10-30 minutes, but this message has been there for more than an hour

  Thanks for your reply.  At the end I just restarted and Setup continues.  I think you problem was that I had refused the pre installed anti virus because it installed when you restart.  Too bad, he can always delete it again.

• I installed Windows 7 64 bit on my Acer Aspire one D255, but I can not install the vga intel now more.

  could someone help me please?

  Hello
  1. what happens when you try to install the VGA?
  2. you receive an error message?
  3 - is an installation problem only intel VGA or also with other applications?
  Follow the suggestions and then check out.

  Method 1

  Download from the link below and check if it works very well.

  http://www.Acer.co.UK/AC/en/GB/content/drivers

  Method 2

  Check to see if the problem exists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

• software and star driver hp psc 1315xi all-in-One extracts full but will not load on xp sp3

  Can not find a way to get this to install. After extracting I finally found it in running %Temp%. Searching through all files and folders, trying to find the exe file. to get it to autorun, but was unsuccessful. I tried to install this on 2 different PC with xp pro sp3 but no luck.

  The solution below is from michael323 here in the Forums of HP's Support.  Make sure that you send Bravo!

  I think I have solved this problem.

  I have a PC Windows XP Pro (SP3) who has been affected by this problem.

  Immediately after that the window of 'extraction' went to 100% and closed, nothing happened.  The windows install/never display software.

  Whenever I tried it creates a log file that started with this:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  # GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "

  System LangID = 1033.  mapped to ENU

  # The system language is ENU, but is not on our CD!

  There was other error messages after that, but they all come from lines 3 and 5.

  Something she prevented the installation program to recognize the language ENU files ARE present in this download.

  Comparing two PCs, a problem, and one that works perfectly, I saw that one who was not was AutoRun disabled through a registry setting.  I temporarily deleted this registry on the PC that wasn't and Setup launched and ran like he was supposed to.  Here are the first of this log from the same PC, a few minutes later, where the only difference was that I had removed the registry setting criminalized:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  System LangID = 1033.  mapped to ENU

  We use the system of language = FRA, which is located on our CD!

  As you can see, the message "(LanguagesInthisCD) failed" (line 3) disappeared, and the line 5 (now line 4) shows that it has to recognize that the language ENU installation files are present.

  So if you encounter this problem, and you are comfortable with the system registry, here is how I got it to work on my PC:

  Start regedit
  Navigate to the bottom of this tree
  -HKEY_LOCAL_MACHINE
  -SOFTWARE
  -Microsoft
  -Windows NT
  -CurrentVersion
  -IniFileMapping
  Below, find out if there is a key named "Autorun.inf".
  On my PC (the one with this problem) the value of this key has been "@SYS: nexistepas".
  If your registry database also has this, it may be the cause of your problem.
  In the left pane of regedit, do a right click on Autorun.inf and select "Rename" from the context menu.
  Change the name to something like "Autorun.inf.hold".
  Close regedit
  At this point, I restarted my PC, but I don't know if it is really necessary.
  I ran the downloaded driver file.  It extracted, and the Installer started out as it was supposed to.

  When it was done, I returned in regedit and renamed "Autorun.inf.hold" to "Autorun.inf".

  It is extremely frustrating for me, and (if you need it), I hope that this solution works for you.

• How can I connect HP Deskjet 1050 printer to my ASPIRE ONE Laptop D270

  How can I connect HP Deskjet1050 printer to my laptop ASPIRE ONE D270

  Chfergi975

  Have you read the manual of the printer?  Have you contacted HP?

  Generic help is all that we can give you.  You better go to HP, BUT the first thing you need to do is to install the printer driver.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Aspire One AOD 270

  I have an AOD270 an Aspire.  There 1.00 GB of RAM and a 10-minute auto-off function which makes it difficult to accomplish any task prior to the stoppage.  Now I can't yet to renew because of the minimum RAM antivirus software.  Can I fix by adding a device to the USB - stick or external hard drive?

  Hello Sharon,

  I guess that your netbook under Windows 7 Starter works. It supports up to 2 GB maximum memory.

  Then I suggest you update to solve your problem.

  You will find the correct key on Crucial Adviser. Choose your model of laptop Aspire One D270.

• Acer Aspire ES1-511 plugged in, not charging ~ ~ Orange flashing

  I have an Acer Aspire ES1-511 and the orange light (flashes charge) and when I unplug the charger and the laptop stops and custom lights unless I plug in.

  Also, when I plug it in, it says "plugged in, do not load.

  If someone could help me, it would be great!

  Unfortunately, you will need to replace the battery. I give you the part numbers of the original batteries:

• How to connect a camera endoscope for an ACER aspire one D255E-notebook via a USB port?

  Hello community, I try to be hot to connect a camera small endoscope to an ACER aspire one D255E-notebook, I can not install a CD of the software on this model of laptop. Can I use the DESIGN MANAGER to install an external camera like this?   THANKS in advanced for any & all of your comments.   P.S. this notebook a starter for windows 7

  You'll need to install the drivers somehow.  If they came on a cd, you can copy it to a USB stick and install from there.

• Acer Aspire XP, will not load, gives calling pool bad error bluescreen 0x000000c2 (0 x 00000043, 0xc6f6c000, 0x00000000, 0x00000000)

  Have acer aspire one, it turns on appares to load windows xp but stops and has a pool caller bad blue screen, it lasts for a half second, so had to video screen to get the code 0x000000c2 (0 x 00000043, 0xc6f6c000, 0 x 00000000, 0 x 00000000). NetBook then passers-by to start in safe mode, last good con fig etc.

  You can choose one of them, but shut up just go back on screen. Went out disk hard netbook has no CD drive, put in the caddy and connected to another computer, can access all the files came out RAM and installed on another computer, is very well... Hard drive so OK. and Ram OK, so it's XP drivers...?

  took a hard drive of lenovo and put it in the acer, 4 months he turned acer and it works very well and is much faster.

  now I know his thinking about windows xp vista or windows7 operating system update.

  looked at windows xp folder driver thought about reinstall but it is best just to remove / upgrade the system

  No new hardware in six months.

  blue screen comes on during a half sec in safe mode, then restarts.

  pressed F8 got more options said to not restart if fail, then it would freeze on blue screen.

  said press alt gr f10 or f12 to get factory files but the option isn't there.

  When I mounted the disc via caddy with the lenovo there only one partition so no recovery is prescent.

  all user files can be viewed and copied, fortunately...