The installer of SQL 2008 R2 - I get could not open key: UNKNOWN\Components\C89F41A0CA86

Similar Questions

• I am trying to install a scanner treated after installation failed previously and I get the message "Could not open key".

  Could not open key

  How can I give me access to a registry key?  I am trying to install a scanner treated after installation failed previously and I get message "could not open key: UNKNOWN\Components\AFlE7E2767BA2BB41B713A00FB8FACC4\4D7CB2A83D7A5D543B2D9374815CC314.» Verify that you have sufficient access to that key...

  Click Start, type: regedit

  Click with the right button on regedit

  Click on run as administrator

  Make sure that you back up your Windows registry database before you try:

  How to make a backup of the registry in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• "Error 1402.Could not open key" during the installation of Adobe and HP update. Updates failed and earlier of the software cannot be put back in place because permission to modify the key is denied.

  • Issue: Failed to update and previous software may not be returned to or re-installed. Problem programs include Adobe Reader and scan and editor for my HP C4180 all-in-1 photo printer.
  • (For example) error messages:
    Error 1402.Could not open key:
    UNKNOWN\Components\1FA18F797...
    Check that you have sufficient access to that key, or contact your support...
  • No recent changes, with the exception of updates failed and normal widows.
  • I thought bad updates from HP and Adobe has caused the problem, so I uninstalled and tried to re - install the software several times, hoping a release update would solve the problem.  Impossible software returned to or re-installed, so I bought try 'PDF Converter 6' to to access PDF files. This program could not be installed for the same reason.

  The Windows 7 FAQ has reported that Windows 7 could be reinstalled everything keeping the settings. The same can be done with Vista? If not, is there a safe way to delete these keys, so the software can be installed/re-installed without having to make a facility 'clean '?

  Thank you.

  Hi misterDormie,

  This problem may occur if the permissions to a specific key in the Windows registry has been denied because the registry is corrupted or due to registry permissions

  I suggest you try the following steps:

  Step 1: Check with a different user profile

  If you do not have a different user account, you will need to create a (see link below).  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  If the problem persists,

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  You can follow the steps mentioned in the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try reinstalling iTunes but I get the error "could not open key: HKEY_LOCAL_MACHINE\Software\Classes\.m4b\OpenWithList\iTunes.exe.

  original title: problem with installation of iTunes

  Hi guys

  iTunes was running great until I tried to update to 9.0...

  I tried the apple forums and forum of microsoft ideas, but nothing helps...

  I use a dell 17 with vista home premium with sp2 installed studio.

  partially, he settled then I get this error:

  Could not open key: HKEY_LOCAL_MACHINE\Software\Classes\.m4b\OpenWithList\iTunes.exe check that you have sufficient access to that key or contact your support team.

  I guess you're the closest to support staff I have....

  in any case... I uninstalled itunes and quicktime and itunes now will not reinstall.  I tried the version 8.2.1.6 and I guess I can try the previous version... I also tried opening the HKEY and got in what concerns the OpenWithList, but he will not give me access.  I have no idea what I'd do if I got there, but I watched out of curiosity and was blocked...

  any info would be greatly appreciated!

  If you have guitar questions let me know, I have been a tech for almost 25 years.

  Thanks again, scott

  I had the exact same problem and error as you message the guy but he fixed earlier. I'm not an expert, or even trained somehow. I just worked through until I got everything to install. If you try this, please back up your registry first.

  In any case, here's what I did.

  First of all, I uninstalled iTunes, Quicktime, Apple Software updater toally, _-anything with Apple in the name.

  I opened regedit using 'run as administrator '.

  I then went to the registry key:

  HKEY_LOCAL_MACHINE-1-5-18\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\108B43C0CEA676640B35306AE7D24051

  .. .and selected the folder DA42BC89BF25F5BD0AF18C3B9B1A1EE8

  Right-click & click Permissions
  Click Advanced, and then click the owner tab
  Type "Administrators" in the current field of owners and th check Replace owner subcontainer and volumes

  (Note: I did this because I had another key with permission issues, after I fixed the original onelisted above)

  Apply the settings, and then click Permissions tab. Once more, add 'administrators' to the permission entries list, and then click on edit and select all the checkboxes of permission. Also click on the boxes of the 2 bottom regarding permissions inheritable.

  Click OK

  Now on the main permissions tab, choose administrators in the windows user name or group and then check the full control and read check boxes. Click OK.

  In the main window of regedit, you should now see the keys in the right pane for each subfolder in:
  HKEY_LOCAL_MACHINE-1-5-18\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8

  In the menu bar click file > exit

  I downloaded and installed the new handset iTunes9 and apple Quicktime.

  Everything worked well. I hope this helps.

  -J

• to restart my macbook air early 2015 in windows 8.1 to begin the installation it tells me that usb drivers could not be found, what should I do?

  to restart my macbook air early 2015 in windows 8.1 to begin the installation it tells me that usb drivers could not be found, what should I do?

  It downloads everything and restarts in windows 8.1, then when I click on install now a message pops up saying that miss me the disk drivers important that I don't know what to do

  This is an incorrect error message. Please post the exact error message or a screenshot of the error, if possible.

  See also no drivers were found and the reference to AppleSSD.sys.

• just upgraded to Imac 27 "5K, installed the Software Photoshop cs4, then saving files get 'could not save file currently in use or is still open' how can I remedy?

  just upgraded to Imac 27 "5K, installed the Software Photoshop cs4, then saving files get 'could not save file currently in use or is still open' how can I remedy?

  Check this message: Re: "cannot save (file name) because the file is already in use or left pending."

• AddNode cmd failed for the secondary node: internal error of AAM - agent could not start. : unknown error HA

  I'm testing paths to upgrade to vSphere ESX 3.5 update 4 on an IBM BladeCenter with 2 hs21 xm Server blades; I am going through several problems, and the last is the one mentioned in the subject of this thread.

  In this scenario, I've upgraded successfully vCenter then I took all the virtual machines on a single host esx 3.5, I removed the other host in the cluster, and then vcenter, then I did a new install of vSphere, I reconnected it the host to the cluster then I did all the procedure with the second node. In the end, I have two installed vSphere hosts but I had to disable my cluster HA always been, I get this error when I try to configure HA agents on the hosts, but I must say that the DRS ok works.

  In the release notes for vSphere, in the section known issues, I can read:

  "Upgrade of an ESX/ESXi 3.x host an ESX/ESXi 4.0 host results in a successful upgrade, but VMware HA reconfiguration may fail.

  When using vCenter Update Manager 4.0 to upgrade an ESX/ESXi 3.x ESX/ESXi 4.0 host, if the host part of an AP or DRS cluster, the update succeeds and the host is reconnected to vCenter Server, but HA reconfiguration may fail. The following error message in the summary of the host tab: HA agent has an error: cmd addnode failed for the main node: internal error of AAM - agent could not be started. : HA unknown error.

  Solution: manually reconfigure HA by right-clicking on the host and select Reconfigure for VMware HA. »

  The problem is that of workaround does not work for me, so I was wondering if someone, is once again able to help me with this problem.

  Thanks in advance for your support.

  Hi Caddo,

  I had the same problem with one of my hosts.  It was resolved after disabling HA on the cluster and enabling again.

  Mirko

• Could not open key: HKEY_Local_Machine32\software\microsoft I get this when you try to uninstall programs... can not uninstall anything - sometimes it starts with an error message 1402, but always the same can not uninstall anything

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi kmurf32,

  (a) what programs you try to uninstall?

  (b) what is you receive the exact error message?

  (c) are that you can install updates for Windows and other programs without any problem?

  To better understand the question, please provide more details about the problem you are having, we will try to help you solve the problem.

  If you are unable to install a program, you can follow the steps to uninstall from the computer.

  Step 1: use the Windows Installer Cleanup utility for delete all entries (uninstall program) that are associated with the product that you're having trouble:

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/default.aspx/kb/290301

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• During the installation of an update for Skype get device not detected DirectX error

  Original title: is no longer detected device DirectX

  When you install an update to Skype, it crashed (and does so every time I have install and reinstall) peripheral suitor DirectX not detected.  Someone knows what to do?

  Hello

  ·         The issue is only with Skype?

  ·         What operating system do you use?

  I suggest you to contact the Skype support for any known problem connects to the update of Skype.

  https://support.Skype.com/

  See also:

  Diagnosing basic problems with DirectX

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

   

  Run the DirectX Diagnostic tool

  http://Windows.Microsoft.com/en-us/Windows-Vista/run-DirectX-Diagnostic-tool

• Impossible to uninstall Photoshop CS3 on my mac: I get the following: the alias 'Add or remove Adobe Photoshop CS3' could not open the original item cannot be found.

  Any help appreciated.  Photoshop has worked well on that computer for years.  Recently, I encountered several problems when the hard disk ran out of space.  Space has subsequently done away Dropbox, the OS has been updated, but Photoshop doesn't work anymore and I think I should only uninstall/reinstall.

  You should be able to run the CC / CS own Script tool completely uninstall any old version of PS:

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

  Mike

• "Error 1402.Could not open key" during the installation of Adobe reader or acrobat in server 2008r2

  This error has been reported previously and in the PC, the solution is to go to the MSFS file.  In the registry of the server 2008r2 software / CurrentVersion / run: there is no OpticalComponents/MSFS.

  Really need help.  Thanks Chris

  It seems that this problem was created because I used the clean windows on this server uninstall utility before the utility was removed by MS because it caused this error.  There is a registry fixit solution to restore the default permissions that I found that has worked for others.  Itself will follow the appropriate section.  Thanks Chris

• Impossible to uninstall Adobe Reader Error 1402 could not open key. Fatal error during installation

  try to unstall adobe because or a 1402.and code reinstall date adobe reader. try to read my email.

  Hi daddymac50,

  ·         What is the service pack installed on your computer?

  ·         Do you have previous versions of Adobe installed on your computer?

  Follow the steps in the link below and check off the results: Error 1402. Error 1406. Acrobat, Reader:http://kb2.adobe.com/cps/329/329137.html

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get ' could not open/dev/vmmon: no such file or directory.' error

  Im trying to open VMware Fusion Pro 5.0.5 on my Mac, and it continues to give me the following errors in the order:

  1.

  2.

  3.

  I would be extremely grateful if anyone knows how I can solve this problem and access my fusion I need emergency to use some software it contains.

  I did a "collect information of technical support" (attached), but unfortunately this means absolutely nothing to me. Post edited by: Carla15

  Hi Carla15and welcome to the VMware communities!

  Your Mac has been upgraded to Yosemite (OS X 10.10), but 5 merger is too old to be compatible with Yosemite.  You must upgrade to 6.0.5 Fusion or Fusion 7 for compatibility with Yosemite.

  See you soon,.

  --

  Darius

• Could not open the registry. Registry name: mysystem

  Hello
  When loging in mysystem, after input username and password I get:
  Could not open the registry. Registry name: MYSYTEM.
  
  Any idea?
  
  Thank you.

  What happens if you replace

  Stop all, purge the cache and restart all.
  
  Nicolas.
  		   

• How to skip the installation of SQL Express 2005 and using SQL Express 2008 instead?

  I have SQL Express 2008 is installed and you want to use instead of SQL Express 2005.

  How to configure the installation of Lookout as he ignores the installation of SQL Express 2005?

  Are there other measures that must be taken so that Lookout can work properly with SQL Express 2008?

  Thank you.

  OK - it worked.

  However, for 64-bit installations, I had to use the WOW of SQL Express 2008 versions, because, the Citadel is a 32-bit database and installation of 64-bit native versions would not allow an upgrade of the Citadel of Instance.

  Thank you.