608 pro: Pro 608 work more micro No.!

Similar Questions

• HP utility: Officejet Pro 8500 has more "currently unavailable".

  New Officejet Pro 8500 worked more fine for one day on an iMac OS x 10.6.8 running.  Then an unrecognized Capture of image scanning - device problem.  Correction to reinstall the HP software and reset of the printer in system preferences.  But all attempts to run the utility (version 4.8) HP give "currently unavailable" message if connection by USB, Hello or wireless network.  Am able to connect using the ip address of the printer by using the built-in web server and everything looks normal.  Only problem seems to be HP Utility works do not.  Utility HP was working before the problem of scanning.

  Correction of a problem via the option "scrubber" Uninstall found elsewhere in this forum.  Had already done "classic" uninstall and install (from this site, not disk) that has not worked.  Everything works fine now.

• OfficeJet Pro 8500 a: Officejet Pro 8500 has more ADF will not work

  like others, I have this problem.  In fact I do not use the ADF very often and this kind of ignored her, but today, that I needed so decided to try to fix it.  I tried most of the fixes here and the first did nothing, but trying to look at this, I decided to put the paper in the ADF, then open the cover and look to see what happened.  My God, he started work.  I let go a bit and then started to lower the lid.  Heck, he stopped.  Essaye tried again, stopped again that I dropped the lid.  Did that a few times and then being qualified professionally I have the fix engineering, a slight slap on the far side of the adf, as on the back of the printer.  Now, my God, it was only half an hour, but the thing works.  Put three leaves there very well.

  If my thoughts are that some switch or sensor is loose or slightly stuck somehow, and that's the question.  Looking at what others have done, I epxect that they opened and closed the lid several times, because it a bank in the meantime or in the process, and perhaps it's her.  Probably HP guys could tell us what it is?

  Hello @billfern,

  I understand that you were familiar problems of automatic document feeder on your HP Officejet Pro 8500 has more e-All-in-One Printer and after trying to solve the problem, you have found that when you lower the scanner the paper process would stop. I'm happy to hear that you were able to solve this specific problem by giving a bit of a slap to the printer. This certainly isn't a standard troubleshooting step, but one that I saw set a number of different problems!

  In your case, I agree that there is a sensor or roller conflict occurring which is at the origin of the book of power question. This may be due to a defect of the real hardware or a programming problem. In all areas of document feeder, it is not so simple. There are many variables that can affect the document feeder Assembly. Some problems occur after crossing the media statement incorrect Assembly or an overload of the Assembly. Other problems occur if a part in the tray is physically broken. And some points can be caused by a programming problem. However, in all cases, if the charger is faulty a replacement of the entire unit would be necessary that the tray is not a replaceable part.

  It is never a bad idea to update the programming on your machine. Even if your specific Officejet works at the present time, I would recommend sending the last update of the Firmware to it. You can download and run the update of the Firmware by clicking on here.

  Thank you for joining the Forums of HP Support!

• OfficeJet Pro 8500 has more: Scanner has stopped working

  Scanner no longer works. Printer turned on and outside, missed scan printer Dr, which did not work, pulled the power cord, checked the wireless network, turn off router then return. Never had this much trouble getting scanner to work. Ideas.

  @Joe5

  If you did not, please remove the existing printer software > restart > install a new copy of the software full functionality.

  Assuming the printer is functional, connected, and that print of Diagnostics shows no errors, then consider / try one of the following Scan Options.

  Printer

  HP Officejet Pro 8500 has more e-All-in-One Printer - A910g

  Full software features:

  File name: OJ8500_A910_1315 - 1.exe

• OfficeJet Pro 8500 has more: back two has stopped working

  Two sides priting has stopped working. Print both sides "checked" but print dialog shows released a face on two sheets or "layout" began to show "long edge binding" as GRAYED OUT. Any ideas please?

  Hey @mossy21,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you have options with double-sided printing to your Officejet Pro 8500 at more of your Mac 10.10 system. I can help with that.

  Here's what we will try to solve this problem:

  1. Go to your Apple icon, system preferences, printers and Scanners.
  2. Hold down the command key and click on the image to your printer on the left.
  3. Click on reset printing system.
  4. Go to Applications, utilities, disk utility.
  5. Click "Macintosh HD" on the left.
  6. Click on verify disk permissions. This should take about 10 minutes.
  7. Click on repair disk permissions. This should take about 10 minutes.
  8. Restart your Mac.
  9. Return to the printers and Scanners.
  10. Click on the button "+" at the bottom left.
  11. Select your printer.
  12. Next to the line indicating the use, click on the box and click on the name of your printer in the list.
  13. Click on Add.
  14. Try to print.

  This should allow you to print double-sided.

  If this solves your problem then please let other users of the forum know clicking on accept as Solution below my post.

  I hope this helps and I hope you have a nice day!

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• OfficeJet Officejet Pro 8500 has more eAiO Scan to computer scans only part of the Document

  I am trying to scan my Officejet Officejet Pro 8500 has more eAiO scan to my iMac (Mac OS X 10.6.8).) IT scans only part of the document is scanned. However, when I copy it, the entire document is printed. I was looking for, if I could change this on the officet, or the system of preferences on my mac, but couldn't find anything on the 8500. On mac, I could change something, but it was only the scans on insiders from my computer.

  Scanning directly from the Officejet comes in very handy when the digitization of books, with one hand, I have to push it and the iMac is not in reach of the officejet...

  Otherwise, I am very satisfied with the printer and everything works fine...

  Thanks for any help.

  iMac (Mac OS X 10.6.8)

  Hello

  I hope you feel better now!

  Please specify the exect option that you use to scan from the control panel of the device.

  What exect icon are you clicking after selecting the scam?

  If it is computer, try to update the latest version of the driver and check if the Scan shortcuts Manager do not appear:

  Click the Apple icon, then software updated. Be sure to select any update HP available.

  If you don't see the specific option yet, you will need to delete all HP software installed completely and install the latest version:

  * Please note that the following steps will delete all HP software installed.

  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  Download and install the latest driver below:

  http://FTP.HP.com/pub/softlib/software11/COL34340/MP-85024-2/OJ_AIO_08_8500_A910_Net_Full_Mac_WW_74.dmg

  Finally, update the latest driver by clicking the Apple icon, then software updated.

  If you use another method of scan, please specify which option you use.

  Kind regards

  Shlomi

• HP Officejet Pro 8500 has more e-All-in-One Printer - A910g. -Fax Confirmation Page

  I have the HP Officejet Pro 8500 has more e-All-in-One Printer - A910g. It works very well, but how to make a page of confirmation by fax, with the impression of a miniature of the 1st page of the document I sent?  I checked the configuration information, but apparently not have indications confirm that I sent the fax through the confirmation page with a small impression.

  Hi dtaylor569,

  Follow the instructions below.

  To activate the fax confirmation
  1. press the arrow to the right and select Setup.
  2. press on the configuration of the fax, click Fax reports.
  3. press on the Confirmation Fax.
  4. tap to select one of the following options.

  • Discount - does not print a fax confirmation report when you send and receive faxes successfully. It is the default setting.
  • (Fax Send): Prints a report of fax confirmation for each fax you send.
  • On (fax) - prints a report fax confirmation for each fax that you receive.
  • On (Send and Receive) - prints a report fax confirmation for each fax that you send and receive.

  Prints a report of fax confirmation for each fax that you send and receive.
  To include an image of the fax on the report
  1. press Setup.
  2. press on the fax, click Fax of Confirmation reports.
  3. tap on (fax) or we (send and receive).
  4. press on the Fax Confirmation with the image.

• HP Pro 8500 a more automatic charger will not be permanent power supply?

  My HP Pro 8500 has more don't feed from the top of the charger page sometimes, I put the paper in the feeder and hear that the document is loaded and the fax to dial and connect to the other computer and I hear the rotating charger but my document won't back down and I charge the charger and try new and same thing.

  If I open the top cover I see some gear and I believe that the problem can be in there.

  I went to see a new HP printer and I realize now that HP has changed the system of gears by the presence of a button in the middle to the left of the window, maybe the system that I was a problem in the past, I'm disappointed.

  I hope you can help me as I really this printer, I got a Pix before Canon but I wanted to go wireless then I bought this one and I bought a lot of ink cartridge for it. I went a bought a new HP printer with the same ink cartridges, but they do not use the cartridge anymore.

  I don't know what to do?

  Marie-Thérèse

  Hello

  I understand the problem, and it's the black gear from the top of the document feeder cover which is too far from the white gear under the lid.

  I took the cover and then went out the 4 torx screws and put in a hold under the screw by the black gear and back up the Assembly and now it works fine. In order to understand this out, I had to cheat the sensor to open the lid by putting a piece of thin cardboard in the back of the slot to the left of the printer (must be a light sensor) and then working notice which prepares and then realize that the white gears were doing their job then I thought that the black gear is not engaging and putting in this hold he pushed the black gear closer to the white gear and that's it, as if by magic, it works!

  This fix may not be for everyone but it works for me.

  Perhaps HP should hire me!     Laughing out loud

  Marie-Thérèse

• HP Officejet Pro 8600 or more: differences.

  Hi all, simple question.

  What is the difference, apart from the form, little speed and LCD screen, between the two:

  HP Officejet Pro HP Officejet Pro 8600 8600 more

  Can't really know if the second is worth 50 euros more.

  Also, the HP drivers work well with OS X?

  Thank you

  Hello

  For more information, you can also check out the link below.

  http://reviews.CNET.com/multifunction-devices/HP-OfficeJet-Pro-8600/4540-3181_7-35060509.html?RID=35034223-35027589-35468786

  If your post has been resolved score the same as provided solution that makes it easier for others to see and remember to click on Bravo.

• What is the best photo paper 4'x 6' for HP Officejet Pro 8500 has more e-all-in-one Printer?

  1 - HP Officejet Pro 8500 has more e-all-in-One Printer

  2 - operating system: Windows 7-64

  3 - no error message

  4 - no change

  5.-j' have been printing in my old ' hp premium more photo paper "and get very dark pictures and wasted too much ink.

  I've been using "hp premium more photo paper glossy" and get very dark pictures.

  Before this printer, I used a Deskjet 5550 with the same paper and get great quality.

  Thank you. Luis Cuenca

  HI cuencaky,

  Here a link to a page with an example of a good 4 X 6 photo paper, you can use with your printer.

  This type of paper is known to work very well.

• Cyan is not printing on HP Officejet Pro 8500 has more - Air bubbles in the ink tubes

  Hi all

  I know why cyan is not printing.  It is because of the following:

  Ago, I ran out of ink cyan printing ("please replace cyan before continuing").  I live in a remote area and was not able to buy a replacement cyan cartridge, so I read on a hack on the Internet, that was to fool the printer into thinking that the cyan cartridge remained inside ink (just basically restricting the measure gauge so that it read the Full cartridge).  I did it because I had a print document that requires only the black ink, so I knew that this wouldn't be a problem.  Then life happened and I completely forgot my little shortcut, and my wife printed a number of color photos.  I finally had time to cartridges, and I now understood that cyan is not print at all.  I have now opened up the printer and realize that the cyan ink tube is full of bubbles...

  I tried to fix this by printing A4 pages that are for the most part, cyan, but without success.  I even tried to put pressure on the ink cartridge cyan in order to flood the cyan ink tubes - also, it does not work.  I read somewhere that there is a way to actually get some printers to pump tubes with ink, is - it possible on the Officejet Pro 8500 has more?

  Of course, I did all the tools that are pre-set to the arsenal of 8500, but still no luck.

  I know I'm in the situation I am purely because I don't use the device as intended, and people that no one is to blame but me, but I'd appreciate any help you could provide.

  Thank you

  John

  John, looks like you have a problem with the ink system. Unfortunately, what it looks like happened here, is that your ink nozzle, tubing and probably-print head have put dry for cyan. Work around is pretty neat, but it really is only recommended for a very temporary solution. If the ink has dried in the piping, but elsewhere in the printer then can be a decent chance that this printer will be not likely reprint the cyan. You can try to run the automatic cleaning process (up to three times I would say) via the Tools menu in the Setup (the wrench).

  In addition, I'm not sure that this will be a question that has a simple resolution. Apologies, John.

  -Spencer

  PS Hope you have a wonderful day and that your time is as beautiful as she is here!

• Premiere Pro CC - worked for a few days, now will not boot

  Premiere Pro has worked in a few days (ocationally gel, but nothing major) and now it's launch.

  Event Viewer says:

  The program Adobe first Pro.exe version 9.0.2.6 no longer interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the control of security and maintenance Panel.

  Process ID: 269c

  Start time: 01d0fec8b70cb72b

  Termination time: 57

  Application path: C:\Program Files\Adobe\Adobe Premiere Pro 2015\Adobe first Pro.exe CC

  Report ID: 3dd852c8-6b77-11e5-bf54-a4db300c9207

  Faulting full name of the package:

  ID of the failed package-parent application:

  The launch of the program, I see the PR splash screen, but it never gets past that point. I uninstalled and re installed (the one used to make it work again briefly...) now I can't start at all.

  The fixed!

  Windows 10 had two updates KB3081449 and KB3081448 that must be uninstalled.

  Explorer on Windows 10 - Super user

  Everything works fine now... but I lost a good 10 days off of my 30 day free trial

• OfficeJet pro 8500 has more: Officejet pro 8500 has will not be printed sheets

  I have an Officejet Pro 8500 has more printer. I try to print the recipes on cards, but everytime I try to do my printer says "incorrect paper size" and then cancels the job. How can I fix it? I have a macbook... I don't know if it's part of the problem?

  Most programs running under OS X obey the size of default page defined by the Print Center/Printer Setup Utility preferences. A notable exception to this rule, however, is that Microsoft Word, which has its own system to decide what paper size to use.

  Change the default value of letter to A4

  Idea of what should be the default paper size is set in the Normal template. Go to Format > Document, and then press the button layout... . Set the size of A4 paper, and then press OK. Press the button by default... , answer Yes to the dialog box, and then press OK. - Source

  I imagine that this also applies to listings so instead of A4, you'd look for 4 x 6! Please let me know if that does the trick!

• Since I upgraded my MacBook Pro does work ' t toolbar, and safari crashes constantly. How can I solve this?

  Since I upgraded my MacBook Pro does work ' t toolbar, and safari crashes constantly. How can I solve this?

  Turn off the Suggestions of Safari in the preferences/Safari/search / uncheck Safari Suggestions.

  Latest issue of the Safari search bar

  http://osxdaily.com/2016/01/05/fix-Safari-freezing-address-bar-use/