7_55 - Win 7 Pro - IE11 JRE. Will not run the applet Java check
JRE 7_55 on Win 7 Pro with IE 11.
I am trying to unravel why, after a new installation of 7_55, I can't do the applet Java check to show the version. With other elements on the page to check that I get a box that says, "the page requires Java... ' And an 'OK' to reject. But I never have the version number to show.
If it is a problem of IE settings to get IE to "mate up" with Java, would someone mind helping me determine what Internet Options must be power for the applet Java check properly see the/State of the current version. After some research, I found some people who use a property setting Compatibility Mode on the JAVAWS and JP2LAUNCHER executables. Unfortunately, on our systems, setting Compatibility Mode to "Windows NT" does not exist in this Panel. It only comes down to Windows Vista.
Due to production requirements, I can't go beyond 7_55. Yes, we know the security implications, but the HQ said that our web applications will not work correctly. And yet more hellish, that HQ tech support people say that I must ensure 7_55 'checks' (and prove) until they talk to me even on other issues of web application. So, I'm kinda stuck at this point. I uninstalled Java from the Windows Control Panel. After a new installation of 7_55, I uninstalled it, this time using RevoUninstaller (who supposedly made a much more in-depth analysis of the system to pick the remaining bits.) I went to ProgFiles > Java > javacpl and told to delete all temporary files.
So please someone give me a hand with this thing check Java.
Note: This forum has the appearance of being developer focused. I would like to ask if I'm in the wrong forum, please point me in the right direction.
Thank you.
Hoib
Ok. nothing of this forum the hearing answer comes from answers.microsoft.com forums. The OP there had a slightly different problem, but the solution hinged on a key factor here.
The key factor is that a system environment variable was not set. Run these two commands from a high in Windows command prompt:
.Jnlp Assoc = jnlpfile
ftype jnlpfile = "C:\Program Files\Java\jre7\bin\javaws.exe" - jnlp '%1' % *.
These commands now Java Web Start Launcher will appear in the Windows dialog box "open with...". "When you try to change the association within the Windows shell. When broken, this Java Web Start Launcher did not appear in this Panel, or you could bring it to appear, so any jnlp file was doomed to failure.
Now, it works very well, thank you...!
H
Tags: Java
Similar Questions
-
Win 7 64 bit computer will not recognize the old JPGs from three 2003 files that were transferred to an external hard drive... File appears in the directory but with no thumbnails icon. Does not open in the Viewer, Picassa, Ifranview, paint, PhotoShop. I get conflicting messages... invalid image (Windows Viewer)... Unknown file format (IfranView)... Access has been denied (painting), a blank image (Photoshop),... You are not allowed to open this file (Picassa).
Creation 2007
Last updated on 2003
2010
Any help would be appreciated.Mahalo,
Philippe
Ran the Scan, the system is secure.
I was able to bypass stubborn files to transfer them to a flash drive and copy them to another folder. I was then able to access. Somehow I messed up the permissions in the previous transfers of old machines and OS.
Thank you for your help and attention.
Mahalo,
Philippe
-
MFP HP LaserJet Pro 400 M425dn will not print the text to format 72 points or more
My workplace has recently bought a M425dn of MFP HP LaserJet Pro 400 all-in-one printer. It works perfectly except for the fact that it will not print text that is 72 points or larger in size. I tried many fonts that are installed with Windows, and all them print correctly to the point size 71.5 or smaller; Another thing simply does not appear in prints. Content which is of size to 72 points or more * fact * affect the flow of the content printed on the page, however. It's like the 72 points or larger text takes up space, but it is completely invisible on the printed page.
I tested using Microsoft Word 2002 on three separate computers, of which two have installed Windows 7 and Windows Vista installed. The problem is the same on all three computers. The printer is connected via an ethernet cable to our wired network. I have installed the printer software included, and I don't think that there are updates for it that have not been installed up to this point.
Any thoughts on how to solve this problem?
Hello, I just made an account to solve this problem for you guys because it has been a puzzle to me also...
I apologize before the huge hand for the terrible grammar and punctuation that I'm in a hurry
Now it does not work for everyone but I fixed it on my machine with the following
now before you print it... .use (ctrl + p) in your text editor to open the print window, click (properties), and then navigate to the tab (Advanced) now, I have a section called the characteristics of the printer in this category there is an option to 'send truetype as bitmap' activate this and see if it can help someone of you, for me, with this PERMIT I can print any font size my processor will allow me to type
in my machine's plug
Reference Dell d6420
Win7
Msoft word 2007
printer itself is
HP laserjet 200 color m276
printer driver is
HP LaserJet 200 color MFP M276 PCL 6
I understand that this printer and driver is not identical to yours in itself, but the nature of these drivers makes it highly likely that this solution works for most of you
If this can help, someone else did post more because I'll probly do not sign in to this site I created this account just for this post and I hope to solve this annoying problem issue for many of you... .no necessary congratulations
-
I have a Mac the OSX Lion version 10.7.3 (11 d 50) I recently installed this printer. I printed the other documents in color without problem.
Now, I'm trying to print an invoice with my company logo. The X in the logo is an image that has different shades of blue, but it prints other items on the invoice that are blue. It also correctly print the watermark in blue.
Any suggestions?
Thank you for responding!
It turns out that I had to change my color matching print settings to make it work. I went under correspondence of colors and changed the option provider corresponding to ColorSync.
This automatically replaced by the profile glossy color Brochure instead of paper simply. It's a shame as this used toner and does not allow you to print a copy of the project.
I tried a couple of the other profiles, but so far they use as much toner, or does not print the logo. I was subjected to time constraints, so I had to stop experimentation, but once this project is completed, I will try the other profiles to see if they work.
-
Server 2008R2 Task Manager will not run the task
Hi all
I have problems with automating a task on the server 2008R2, I have a limited user on my server which account is used to run a media server (Twonkymedia) and a home automation program called "Domoticz".
Because I don't want the user to have access to the normal system resources, it always takes administrator privileges to run the program and access to the database, because I don't want to manually enter credentials of Directors whenever this user logs that I taught on the automation of this with Task Scheduler.
I managed to create a task that toured to launch applications with admin credentialsb (simply by using the command runas in the path did not work) but once I connect and the still as the "limited" user task that has a shortcut placed in the startup folder does not start specific applications When I open the Task Manager to diagnose errors, she appears as running.
Both users are given exclusive rights to start as a processing batch.
22/08/2016 information information on the process created task 129 21:59:40
Information 22/08/2016 21:59:40 200 Action started in f33c3a46-e705-408c-a675-08aabbecf4bb (1)
22/08/2016 information 21:59:40 100 f33c3a46-e705-408c-a675-08aabbecf4bb launched task (1)
22/08/2016 information 21:59:40 319 message task engine received to start the task (1)
22/08/2016 information 21:59:40 110 task triggered by the user of information f33c3a46-e705-408c-a675-08aabbecf4bbThe config is as follows;
In general: it is set to run if the user is logged in or not, and it must run with the highest privileges.
Its triggered when no user is logged on
Actions are the following; Start a program
Program 1: "C:\Program Files (x86)\Domoticz\domoticz.exe ' Arguments www - 1202 - 8000 sslwww
Start in: "C:\Program Files (x 86) \Domoticz.
Program 2: "C:\Program Files (x86)\Twonky\TwonkyServer\twonkytray.exe.
Any idea what's going on here?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
HP C309a will not run the align operation
When I use the HP printer utility to align the cartridges once a new cartridge of the printer installation does not meet the statement of alignment... i. e olein arrives
here document contains information about the failures of alignment with the c309a addressing. You can run an alignment of the façade as described in this document.
-
The program is configured to run from a direct click using a text file specifying where the source files and destination. Worked very well for a direct click or from the. BAT file. It runs the Task Scheduler, I can see it appear in the Excel Task Manager when it is active. But while it freezes. He reads the spreadsheet looking for specific elements then output to a CSV text file.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
Win Windows 7 photo viewer will not open the .psf files
Windows Photo Viewer does not open. PSF files from Epson?
Programs can recognize only the files they are supposed to use.
In the case of the Windows Photo Viewer, the official documentation says that it can display the following types of files (although you can add a little more by installing one or more codecs- LINK):
Joint Photographic Experts Group (JPEG)
.jpg and .jpeg,
Tagged Image File Format (TIFF)
. TIF and .tiff
Portable Network Graphics (PNG)
.PNG
Graphics Interchange Format (GIF)
.gif
Bitmap image
.bmp and DIBs
HD Photo
. WDP
Do you really mean PSF files? As far as I can tell, a PSF file is probably an Adobe Photoshop proof Settings file.
If you mean PDF files - which are outputs to any scanner - you can view these last with the free Adobe Reader or Foxit Readerfree software, among others.
-
Windows 7 will not run the exe files correctly.
I tried to open a file with Notepad as I thought Notepad was the right program to open it. I used the "open with" prompt and select Notepad. It did not open, but immediately after, all single exe files had a picture of Notepad open with notepad and say various gibberish.
After that, I managed to get on chrome right on the PIN I had attached to the taskbar, and then selecting an of my favorites.
I looked for solutions and tried two different solutions so far, regedit solution and the Fix It solution.
Later, I thought that maybe adobe would be able to run exe files, he then began to show an image of the software adobe reader on exe files.
Now, every time I try to open an exe it lands open adobe reader and sitting there without understanding.
I have restart after trying all the solutions and am now at my wits end to know what to do.
.exe, .lnk and other types should not be associated with any program. If you're wrong them associated with a program, it always opens that particular program with the file name as argument. You can reset the UserChoice registry key for this file type. Check:
Restoration. Association of exe in Windows 7/Vista after incorrectly associating it with another program
http://www.Winhelponline.com/blog/exe-file-association-Windows-7-Vista/
-
My internal backup HD was full so I did system image on an external hard drive. That has worked well. When I wanted to make a backup on the same drive, I got the message that he could not be executed.
My internal backup HD was full so I did system image on an external hard drive. That has worked well. When I wanted to make a backup on the same drive, I got the message that he could not be executed.
What was the exact message you saw (Word for Word, please!)?
-
I have a Deskjet 3051 a e-printer/scanner that will not run the scan.
I turned on my computer scan on my Dell PC with Vista, but nothing happens. When I try to scan to the computer it says that there is no network connection. My hotspot is on and the two lites on the printer are on. Any suggestions?
Hi wcaustinfmy,
Uninstall the printer and then reinstall it by using the full feature software and driver from the link below. I would like to know if you are able to scan the reinstallation?
-
Printer will not feed the paper card stock
We have an Officejet Pro 8600 who will not feed the paper card stock. It was the printer that I used when I worked and did a great job on standard paper, but it won't take my wife stock card paper craft. We used to have a Deskjet F4400 HP all in one and we were able to print. Any suggestions would be greatly appreciated.
John
John,
Welcome to the Community Forum of HP.
Try indicating what type of media you print to the printer - if your media in the printing preferences settings do not understand "card", you should choose something else which is similar: Matt Brochure, card, 'something' that kind of card stock for the printer to the printer waits 'thick' paper looks.
Printing preferences - Windows and Mac
and... not really related, but may have some relevance:
Print Labels_Business-Cards_Cards
Click on the thumbs-up Kudos to say thank you!
And... Click on accept as Solution when my answer provides a fix or a workaround!
I am happy to provide assistance on behalf of HP. I do not work for HP.
-
When I download a game it will not work the screen just keeps on changing color and color stripss
When I supported a game it will not run the screen just keep changing colors and strips coloued
Hello
Please try to install the game in compatibility mode. Here is some information that can be very practical...
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
-Check the functionality of the game under a spare user account
Uninstall/reinstall the program
-Clean Boot http://support.microsoft.com/kb/331796
I hope that this information is beneficial.
Thank you
Aaron
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
JavaError: "failed validation certificate. The application will not run.
HI, OTN,.
1. I uninstalled the EPM
2. install 11.2.3.500
3 configuration is complete.
4. download and install JDK 1.6_45
5. while I run the Regional service console I get the error message
JavaError: "failed validation certificate. The application will not run.
java.security.cert.CertificateException: your security configuration will not allow the authorization of new certificates
at com.sun.deploy.security.TrustDecider.isAllPermissionGranted (unknown Source)
at com.sun.javaws.security.AppPolicy.grantUnrestrictedAccess (unknown Source)
at com.sun.javaws.LaunchDownload.checkSignedResourcesHelper (unknown Source)
at com.sun.javaws.LaunchDownload.checkSignedResources (unknown Source)
at com.sun.javaws.Launcher.prepareResources (unknown Source)
at com.sun.javaws.Launcher.prepareAllResources (unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch (unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch (unknown Source)
at com.sun.javaws.Launcher.launch (unknown Source)
at com.sun.javaws.Main.launchApp (unknown Source)
at com.sun.javaws.Main.continueInSecureThread (unknown Source)
to com.sun.javaws.Main$ 1.run (unknown Source)
at java.lang.Thread.run (unknown Source)
6 console file is not available "Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\". I missed a step in the installation and the configuration?
Need help, the team
Concerning
Brouwer
Have you tried to lower the security?
Check the support matrix - http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
You can also install the Regional service console
-
I want a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat Pro 10.1.12 file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser. Unknown error. (123).
You can try a repair of your Acrobat installation. Maybe, at least it's a start toward a solution.
Maybe you are looking for
-
How to group messages between different phones
Hi, my friend just got a Galaxy and told us we could still message group with my other friend and I of the iphone. But its been three days and my friends on the Galaxy can only get our messages when they are sent only to him directly. Is there a way
-
I don't like to accumulate 3 cookies and would not simply check accept first-party Cookies 3rd box in preferences. BUT I have to accept 3rd party cookies to use the web page from my Bank, a separate site that manages some of their transactions (such
-
I can't move a circle face after adding pictures
After you add a circle of face I can't resize or move it. Why?
-
I have a HP Compaq originally shipped with XP Pro dc5800 and now has Window 7 Pro. The reference is AK819AW #ABA. He has BIOS version 786F2 v01.04 dated 31/01/2008. I was looking on the HP site for an update of the BIOS for it and found nothing in
-
Using 6509 DIO as input to trigger the TCP messaging
I'm a traditional GPIB instrument and no TCP, and I asked a question. Is it possible to use the 6509 and a benchtop time signal generator a loop of LabVIEW? We have a loop that runs not controlled at a high rate (messages TCP). We would like to input