HP C309a will not run the align operation

Similar Questions

• J4580: J4580 will not detect the alignment page.

  My J4580 that works very well for years, now will not detect the alignment page after you print and put on the scanner bed.  I try three times and it then goes to the default alignment parameters.  It still prints but text tends to little fuzzy.  What can I do to fix this?

  Hi @BruceK43,

  Thanks for joining the Forums of HP Support for a solution to your problem of alignment.

  I understand that you used a HP Officejet J4580 all-in-One printer with a Windows 10 computer but when you try to only scan the alignment page, the printer is not detected by the alignment page returns to the default alignment parameters. I would like to help with that.

  Here is the document of support designed to be used with this problem - a "alignment failed" Error Message appears on the printer control panel.

  Please let me know if that solves the problem, or if you need assistance.

• HP Pavilion 550-055na: new disk will not install the new operating system

  Hello

  I bought a new HP Pavilion 550 - 055na with Windows 8 a month or two ago but want to use Windows 7. However, I decided that I will keep the hard, the PC came with, and have the option of Windows 8 in future if I want. So, I'm installing Windows 7 on a new hard drive.

  My problem is that the new copy of Windows 7 will not install on my new hard drive.  I get:

  Violation of secure boot

  Invalid signature detected. See the policy in the configuration of secure boot

  Then me to a black screen after I pressed Enter/Ok, who said the following.

  Check the presence of the media...

  Media present...

  On IPv4 PXE boot.

  If I press F12 on power on, I get a blue box asking me to select a boot device. The only options are:

  Realtek PCIe GBE Family Controller IPv4
  

  Realtek PCIe GBE Family Controller IPv6

  and the output by using the arrow keys

  How to change the secure boot strategy?  If I do, it means that I can install my 7 can I on my new hard drive? Also, providing that I do, I always will be able to use my Windows 8 OS drive after changing the secure boot strategy?

  Any help would be appreciated to greately.

  Sincere greetings

  DJ

  Hello:

  You have to enable the legacy mode and disable start-up secured in the BIOS to be able to install and run W7.

  Please see this link to find out where these settings... this references adding a video card, but this is how you change the settings no matter why you need to change.

  http://support.HP.com/us-en/document/c03653200/

• 7_55 - Win 7 Pro - IE11 JRE.  Will not run the applet Java check

  JRE 7_55 on Win 7 Pro with IE 11.

  I am trying to unravel why, after a new installation of 7_55, I can't do the applet Java check to show the version.  With other elements on the page to check that I get a box that says, "the page requires Java... ' And an 'OK' to reject.  But I never have the version number to show.

  If it is a problem of IE settings to get IE to "mate up" with Java, would someone mind helping me determine what Internet Options must be power for the applet Java check properly see the/State of the current version.  After some research, I found some people who use a property setting Compatibility Mode on the JAVAWS and JP2LAUNCHER executables.  Unfortunately, on our systems, setting Compatibility Mode to "Windows NT" does not exist in this Panel.  It only comes down to Windows Vista.

  Due to production requirements, I can't go beyond 7_55.  Yes, we know the security implications, but the HQ said that our web applications will not work correctly.  And yet more hellish, that HQ tech support people say that I must ensure 7_55 'checks' (and prove) until they talk to me even on other issues of web application.  So, I'm kinda stuck at this point.  I uninstalled Java from the Windows Control Panel.  After a new installation of 7_55, I uninstalled it, this time using RevoUninstaller (who supposedly made a much more in-depth analysis of the system to pick the remaining bits.)  I went to ProgFiles > Java > javacpl and told to delete all temporary files.

  So please someone give me a hand with this thing check Java.

  Note: This forum has the appearance of being developer focused.  I would like to ask if I'm in the wrong forum, please point me in the right direction.

  Thank you.

  Hoib

  Ok. nothing of this forum the hearing answer comes from answers.microsoft.com forums.  The OP there had a slightly different problem, but the solution hinged on a key factor here.

  The key factor is that a system environment variable was not set.  Run these two commands from a high in Windows command prompt:

  .Jnlp Assoc = jnlpfile

  ftype jnlpfile = "C:\Program Files\Java\jre7\bin\javaws.exe" - jnlp '%1' % *.

  These commands now Java Web Start Launcher will appear in the Windows dialog box "open with...". "When you try to change the association within the Windows shell.  When broken, this Java Web Start Launcher did not appear in this Panel, or you could bring it to appear, so any jnlp file was doomed to failure.

  Now, it works very well, thank you...!

  H

• Server 2008R2 Task Manager will not run the task

  Hi all

  I have problems with automating a task on the server 2008R2, I have a limited user on my server which account is used to run a media server (Twonkymedia) and a home automation program called "Domoticz".

  Because I don't want the user to have access to the normal system resources, it always takes administrator privileges to run the program and access to the database, because I don't want to manually enter credentials of Directors whenever this user logs that I taught on the automation of this with Task Scheduler.

  I managed to create a task that toured to launch applications with admin credentialsb (simply by using the command runas in the path did not work) but once I connect and the still as the "limited" user task that has a shortcut placed in the startup folder does not start specific applications When I open the Task Manager to diagnose errors, she appears as running.

  Both users are given exclusive rights to start as a processing batch.

  22/08/2016 information information on the process created task 129 21:59:40
  Information 22/08/2016 21:59:40 200 Action started in f33c3a46-e705-408c-a675-08aabbecf4bb (1)
  22/08/2016 information 21:59:40 100 f33c3a46-e705-408c-a675-08aabbecf4bb launched task (1)
  22/08/2016 information 21:59:40 319 message task engine received to start the task (1)
  22/08/2016 information 21:59:40 110 task triggered by the user of information f33c3a46-e705-408c-a675-08aabbecf4bb

  The config is as follows;

  In general: it is set to run if the user is logged in or not, and it must run with the highest privileges.

  Its triggered when no user is logged on

  Actions are the following; Start a program

  Program 1: "C:\Program Files (x86)\Domoticz\domoticz.exe ' Arguments www - 1202 - 8000 sslwww

  Start in: "C:\Program Files (x 86) \Domoticz.

  Program 2: "C:\Program Files (x86)\Twonky\TwonkyServer\twonkytray.exe.

  Any idea what's going on here?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• My VB2013 exe will not run the Task Scheduler but works very well for direct click in Explorer as well as a BAT file.

  The program is configured to run from a direct click using a text file specifying where the source files and destination.  Worked very well for a direct click or from the. BAT file.   It runs the Task Scheduler, I can see it appear in the Excel Task Manager when it is active.  But while it freezes.  He reads the spreadsheet looking for specific elements then output to a CSV text file.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Windows 7 will not run the exe files correctly.

  I tried to open a file with Notepad as I thought Notepad was the right program to open it. I used the "open with" prompt and select Notepad. It did not open, but immediately after, all single exe files had a picture of Notepad open with notepad and say various gibberish.

  After that, I managed to get on chrome right on the PIN I had attached to the taskbar, and then selecting an of my favorites.

  I looked for solutions and tried two different solutions so far, regedit solution and the Fix It solution.

  Later, I thought that maybe adobe would be able to run exe files, he then began to show an image of the software adobe reader on exe files.

  Now, every time I try to open an exe it lands open adobe reader and sitting there without understanding.

  I have restart after trying all the solutions and am now at my wits end to know what to do.

  .exe, .lnk and other types should not be associated with any program. If you're wrong them associated with a program, it always opens that particular program with the file name as argument. You can reset the UserChoice registry key for this file type. Check:

  Restoration. Association of exe in Windows 7/Vista after incorrectly associating it with another program

  http://www.Winhelponline.com/blog/exe-file-association-Windows-7-Vista/

• I changed the settings to backup to an external hard drive, but will not run the backup request

  My internal backup HD was full so I did system image on an external hard drive.  That has worked well.  When I wanted to make a backup on the same drive, I got the message that he could not be executed.

  My internal backup HD was full so I did system image on an external hard drive.  That has worked well.  When I wanted to make a backup on the same drive, I got the message that he could not be executed.

  What was the exact message you saw (Word for Word, please!)?

• I have a Deskjet 3051 a e-printer/scanner that will not run the scan.

  I turned on my computer scan on my Dell PC with Vista, but nothing happens. When I try to scan to the computer it says that there is no network connection. My hotspot is on and the two lites on the printer are on. Any suggestions?

  Hi wcaustinfmy,

  Uninstall the printer and then reinstall it by using the full feature software and driver from the link below. I would like to know if you are able to scan the reinstallation?

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-91736-1&cc=us&DLC=en&LC=en&OS=4063&product=5117616&sw_lang=

• When I download a game it will not work the screen just keeps on changing color and color stripss

  When I supported a game it will not run the screen just keep changing colors and strips coloued

  Hello

  Please try to install the game in compatibility mode.  Here is some information that can be very practical...

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  -Check the functionality of the game under a spare user account

  Uninstall/reinstall the program

  -Clean Boot http://support.microsoft.com/kb/331796

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Message "this application will not work in this operating system" at the start.

  Original title: this application will not work in this operating system

  After starting, I get this error message:

  Stop: this application will not work in this operating system

  What application is this? How can I fix? I am running XP SP3

  CZFMDXPK c:\program files\fdd + fever disease combo reader\czfmdxpk.exe a the culpit. The problem is resolved and no Malware found. eventvwr helped me identify other problems, and now I'm curious on how to disable the stubborn programs in msconfig. I'll get.

  You did a great job and thank you very much. Have a beautiful weekend. Rainer

• Purchase Apple Store app will not run. It keeps freezing at the top. Help please what I do

  I bought an app and the application will not run. It keeps freezing at the top. He asks me on a plus to enter info Apple then he said I bought it but will not open the app

  Delete the app first, only then it re-download again.

  If not, try these standard troubleshooting steps.

  Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone.

  https://support.Apple.com/en-us/HT204184

  If your backup in iTunes, make sure that it is an encrypted backup.

• Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

  As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

   
  Hi rdoran,
  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Launch the KVM console: could not validate the certificate. The application will not run

  I use MAC OS and see another error message "certificate validation failure. The application will not run. This error message is seen in release of Java 7 u21 and later also.

  Exception in detail shows:

  java.lang.RuntimeException: no Java triggered, not managed exception! (Original problem: try to insert a list not property object {})
  "https://172.27.136.185"= {} ".

  key AllowNoPromptSites)
  at com.sun.deploy.security.MacOSXUserTrustRecordList.nativeAddTrustRecord (Native Method)
  at com.sun.deploy.security.MacOSXUserTrustRecordList.addTrustRecord(MacOSXUserTrustRecordList.java:92)
  at com.sun.deploy.security.MacOSXTrustUI.evaluateTrustAfterShow(MacOSXTrustUI.java:230)
  at com.sun.deploy.security.MacOSXTrustUI.evaluateAsTrustedSite(MacOSXTrustUI.java:186)
  at com.sun.deploy.security.MacOSXTrustUI.evaluateTrustAndShow(MacOSXTrustUI.java:156)
  at com.sun.deploy.security.MacOSXTrustUI.showDialog(MacOSXTrustUI.java:79)
  at com.sun.deploy.security.X509Util.showSecurityDialog(X509Util.java:152)
  at com.sun.deploy.security.TrustDecider.isAllPermissionGranted(TrustDecider.java:805)
  at com.sun.javaws.security.AppPolicy.grantUnrestrictedAccess(AppPolicy.java:295)
  at com.sun.javaws.LaunchDownload.checkSignedResourcesHelper(LaunchDownload.java:1851)
  at com.sun.javaws.LaunchDownload.checkSignedResources(LaunchDownload.java:1527)
  at com.sun.javaws.Launcher.prepareResources(Launcher.java:1283)
  at com.sun.javaws.Launcher.prepareAllResources(Launcher.java:636)
  at com.sun.javaws.Launcher.prepareToLaunch(Launcher.java:338)
  at com.sun.javaws.Launcher.prepareToLaunch(Launcher.java:238)
  at com.sun.javaws.Launcher.launch(Launcher.java:127)
  at com.sun.javaws.Main.launchApp(Main.java:460)
  at com.sun.javaws.Main.continueInSecureThread(Main.java:292)
  to com.sun.javaws.Main$ 1.run(Main.java:125)
  at java.lang.Thread.run(Thread.java:695)

  Pointers to launch KVM in my system, would be really useful. I'm stuck for over 2 weeks now :-)

  Thanks in advance,

  Suresh.

  Suresh,

  can you provide more details.

  Server model?

  version of the firmware?

  Please read the article if this can help:

  http://www.Cisco.com/c/en/us/support/docs/servers-unified-computing/UCS-...

  -SK

• JavaError: "failed validation certificate. The application will not run.

  HI, OTN,.

  1. I uninstalled the EPM

  2. install 11.2.3.500

  3 configuration is complete.

  4. download and install JDK 1.6_45

  5. while I run the Regional service console I get the error message

  JavaError: "failed validation certificate. The application will not run.

  java.security.cert.CertificateException: your security configuration will not allow the authorization of new certificates

  at com.sun.deploy.security.TrustDecider.isAllPermissionGranted (unknown Source)

  at com.sun.javaws.security.AppPolicy.grantUnrestrictedAccess (unknown Source)

  at com.sun.javaws.LaunchDownload.checkSignedResourcesHelper (unknown Source)

  at com.sun.javaws.LaunchDownload.checkSignedResources (unknown Source)

  at com.sun.javaws.Launcher.prepareResources (unknown Source)

  at com.sun.javaws.Launcher.prepareAllResources (unknown Source)

  at com.sun.javaws.Launcher.prepareToLaunch (unknown Source)

  at com.sun.javaws.Launcher.prepareToLaunch (unknown Source)

  at com.sun.javaws.Launcher.launch (unknown Source)

  at com.sun.javaws.Main.launchApp (unknown Source)

  at com.sun.javaws.Main.continueInSecureThread (unknown Source)

  to com.sun.javaws.Main$ 1.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  6 console file is not available "Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\". I missed a step in the installation and the configuration?

  Need help, the team

  Concerning

  Brouwer

  Have you tried to lower the security?

  Check the support matrix - http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html

  

  You can also install the Regional service console