7000 R as point of access one using the integrated switch

Similar Questions

• Sometimes, without apparent reason, I can't access one of the tiles on my desk.

  * Original title: using Windows 8

  Sometimes, without apparent reason, I can't access one of the tiles on my desk. The tiles will work initially, I can go on Chrome or word, etc. or access any tile on my desk, but then without apparent reason, that it stop and I won't be able to access any more tiles. By clicking on them, doesn't matter.  Similarly I can't log in, unless I press CTRL + ALT + DELETE and then go on logout. But I can't connect the regular channel. Another problem is that if I try to go on my documents, I get a message saying "cannot open this file". It says that the file being deleted or moved, and then the small downstairs for my documents icon disappears. If I turn my computer and turn it back resets itself and I will be able to use the tiles on the desktop and access my documents, etc. But then after a while for no apparent reason it happens again, and I won't be able to access the tiles on the desktop, etc..

  Sorry, if this is insane, or if I'm missing something really obvious here. I probably didn't explain the issue very well and I don't know that much about computers. But it is obviously a question and I was wondering if there was a way to solve this problem.  Thank you.

  (Moved from files, folders and online storage)

  Hello

  See if this helps you improve performance to stop the new power switch again problems.

  Search for malicious software with the FREE version of this program.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-8

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "How to optimize the performance of Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/37511-optimize-performance-Windows-8-a.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Worth the read as:

  "How to optimize Windows 8.1 for a desktop PC.

  http://www.howtogeek.com/167013/how-to-optimize-Windows-8.1-for-a-desktop-PC/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  " " Performance & maintenance"

  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And I would check to see if it has damaged system files.

  Each method/step below progresses to another if the first does not all corrupted files which are, etc..

  «Use the System File Checker tool to repair missing or corrupted system files»

  http://Support2.Microsoft.com/kb/929833?WA=wsignin1.0#manually repair

  _________________________________________________

  And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

  "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Read it in conjunction with the rest of the information they give link above.

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

  __________________________________________________

  "How to update windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  Refresh your PC goes like this:

  • The PC starts in Windows RE (Recovery Eenvironment).
  • Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
  • Windows RE installs a new copy of Windows.
  • Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
  • The PC reboots into the newly installed copy of Windows.

  _________________________________________________

  "How to reset Windows 8 and Windows 8.1" . "

  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  "When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.

  See you soon.

• on windows xp, my system restore to a previous restore point. have you tried many restore points & creating new ones but the system does not restore. all the solutions out there?

  on windows xp that my system restore to a previous restore point, I tried many restore points & created new ones but the system displays "could not be restored", any help out there.

  Let see... What do we know about your system environment:

  It's windows xp.

  If we knew more, you would probably now.

  What is the problem that you are experiencing this thing you System Restore will be remedied?  System Restore is not a time machine.

  The system restore already worked successfully in the past?

  Thank you MS Answers, allowing the resolution of simple problems like frustrating and a lot of time as possible by asking only not for any information system when a new question is asked.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

• I got a notification saying "password requirement: you must change your secret code in 56 minutes"I panicked and entered my access code using the little box? ". I ' t mess up?

  I got a notification saying "password requirement: you must change your secret code in 56 minutes"I panicked and entered my access code using the little box? ". I ' t mess up?

  Yes. You may be victim of a scam, except if you are connected to your business with this requirement.

  Change your password immediately below:

  https://appleid.apple.com.

• I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Original title: multiple monitors

  I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  I suggest you refer to the Microsoft Help Articles below and try the steps mentioned.

  Check out the link:

  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors#1TC=T1

  You can also check:

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• HPE h9-1001de: HPE h9-1001de - broken graphics card can I use the integrated graphics card Intel?

  I bought this PC four years ago (just the version, not CS as in the link):

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03106002

  The integrated graphics went broken today. Research on the spec Web site I noticed that the Intel's integrated graphics. I won't buy another video card, if there is a graphics processor integrated into the processor.

  Indeed, there are two additional DVI ports; However, they are sealed with a sign "DO NOT REMOVE", and each port is sealed with two screws with a strange format (star with six faces?).

  Why these DVI ports are sealed? Why with this format live strange? I hope that's not for licensing reasons, and that I'm still able to use them as DVI ports...

  Thank you.

  Hello:

  I don't think it is sealed for any other reason than from your PC with a video of the add-on card, they would not people plugging in these ports DVI cables and by calling HP support complaining that the video does not work (because an add on card disables the integrated graphics card).

  Remove your discrete PCIe x 16 graphics card, so the built-in graphics card is enabled, put your hand on the good size torx screwdriver and remove the cover, so you can use the integrated graphics card adapter.

• Can I connect a VGA cable simultaneously with a DVI cable to a monitor and use the source switch?

  I found a similar, but not exact question and I was wondering if I could use the VGA cable AND cable DVI simultaneously on a HP 2159 m monitor and switch back and forth from analog and digital using the source switch on the screen? I noticed that some casual games such as found at BigFish and other gaming sites works best on VGA on DVI but I like to watch movies and other DVI instead of VGA?

  I did two HP 2159 m monitor but it could in fact be wise space more convenient to just use the right now and switch from the analog to the digital format.

  Thanks for any response.

  Hello

  You will need to edit the video in the monitor source selection when you want to switch.  Don't put it on AUTO.

  For a test, connect two monitors and then configure your PC for two monitors. Then, remove the monitor as the secondary (VGA) and now connect the cable to the main monitor VGA port.  Now try the video source selection in the menu of the monitor.  I never tried it on my 2159 m but it can work.

  Some monitors do not react to two active flows.

• HP Pro 3130 microtour: use the integrated graphics card Intel H57 Council

  Good afternoon.
  Motherboard HP Pro 3130 Microtour here MS-7613.
  What you need to install the CPU, which it was possible to use the integrated graphics Intel H57 Board adapter?
  Poised the Lynnfield Quad Core Intel Core i7-870, 3300 MHz. It does not work with an integrated video card.
  External graphics in the PCIe slot only.

  Hello:

  Please refer to page 3 of the quickspecs at the link below... specifically the part where it says: NOTE: HP Pro 3130 with Intel Core i5 750 processor or any what Intel i7 processor has no integrated graphics card.

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04290878.PDF

  You will need to add a graphics card into the PCIe x 16 slot.

• Performing a Firmware Upgrade using the integrated HP printers Web server

  Hi all

  This video provides step by step instructions to perform a firmware update using the integrated Web (EWS) server for single function of HP LaserJet and multifunction printers.

  Hope that the information contained in my previous post are useful if you are in the need to update the firmware on your Laserjet.

• The mouse pointer (still) disappears when using the color picker

  Someone suggested to start a new discussion, since the old writing is a couple of years now. Thanks for the tip!

  Whenever I select a color using the eyedropper icon small (used to be a magnifying glass) in the color picker, the cursor goes away after I made the choice of colors.

  I have that experience under El Capitan, but I had the same problem in Yosemite as well as Mavericks and on Mac computers. I've seen this behaviour being reported in the forum for older versions, such as the Mountain Lion, but never with a real solution (workaround has been on creating a new user and delete the old).

  I hope someone has a solution for now.

  The eyedropper tool worked very well for me and still does (I just checked).

  If creating a new user solves the problem then, you have some corrupted in your account settings, or, less likely, you run an application (possibly a connection point) which is the origin of the problem.

  Hold down the option key, and then use

  Finder > go > library

  menu item. You have a folder 'ColorPickers? If so, is it empty?

  C.

• Point display XY graph using the cursor data

  Hello all, I use XY graph to display amplitude v/s time. During the vi execution, data are continuously plooted on chart until the user stops the vi. I want to add a feature, such that, during the execution of the vi, when the user clicks on the chart to the situation with the cursor, it should show corresponding value of time and amplitude of this point. I mean the value of the axis corresponding to the category axis not the cursor position. When you use the position of the cursor, it is ok with the x axis, but it shows the cursor position for y axis (as property said), and I want datavalue said not not the position y axis.

  I hope it's clear with the question. I would like to have a few examples... for y = x graphic below, you can see cursor x = 4.4 and y = 6.8, how to view corresponding datapoint which must be y = 4.4

  When creating (or even after you've created), choose "align on the" plot 0.

  Do not let it be 'slide free.

  

  Attached example.

• How to restrict Internet access by using the RADIUS server via switch Catalyst 3560

  Dear all,

  I need a configuration using any. I have a small network of 15 users a 3560, which is in turn connected to a router ISR 2811. Interface fastethernet 0/24 switch 3560 I intend to connect to a unix based server RADIUS. ISP is connected on the opposite side of the 2811 to the fa0/0 interface.

  I want to make is that if someone among the 15 users tries to access the internet, they must be validated in the RADIUS server by their pre-configured user credentials. (I'm going to store 15 user credentials here). If someone else tries to connect (except those 15) he or she should be denied internet access.

  The RADIUS server will be having a login page to type the name of user and password.

  Please guide based on what commands I should inject into the 3560 or what specifically, I need to have to run this task.

  Thanks in advance!

  Samrat.

  I only did this in a very long time, but you probably want to do is activate the web authentication.

  http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst3560/software/release/12-2_52_se/configuration/guide/3560scg/swwebauth.html

• Remove access by using the import safety

  Hello
  
  
  We are able to create and update the permissions of the users using ImportSecurity.cmd.But where if we want to remove access for all users then how we can use this effective utility because the data are data warehouse and access 'NONE' cannot be assigned to end of DW.
  
  
  Thanks in advance

  If you reload the security whenever you use the SL_CLEARALL parameter to clear the safe first before loading.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• NULL pointer exception when you use the tag ahref

  Hello
  I am writing a file html for the file adapter. Inside the transformation, if I understand ahref* tag, I still get null pointer exception and a 0 KB file is written.
  
  However, if I remove the < a href > tag from the code, the html file is generated correctly. But I need to use ahref* tag. Pls help me solve this.
  The details of the error are:
  
  < bindingFault xmlns = "http://schemas.oracle.com/bpel/extension" > < a name = "summary" part > < summary > file:/opt/aia/product/10.1.3.4/OracleAS_MW/bpel/domains/release2/tmp/.bpel_OA_OUT_BPEL_MiddlewareEmailProv_1.0_734ff6b91af23ed1de9191df79ca28b6.tmp/in_Confirmation_FileWrite.wsdl [Write_ptt::Write (ORDER)] - SISM JCA Execute of 'Write' failure due to operation: null; nested exception is:
  java.lang.NullPointerException < / summary >
  < / part > < part name = "detail" > < java.lang.NullPointerException detail > < / details >
  < / piece > < / bindingFault >
  
  Published by: user11119367 on February 9, 2010 21:23

  Hello
  The custom XSD file is not necessary.
  Looks like it's a bug in file 10.1.3.4/10.1.3.5 adapters - it works very well in 11g.

  Whenever there is "a href" tag in the xml support to write to the file, the file adapter tries to get the content of the url real in 'a href' and written to the output file. When I try with any url (say http://www.google.com), the content of google.com is written in the file. If this URL is not accessible (for example http://foo.bar), then you get the null pointer exception. In your case, I think the URL that you are using the payload, is not accessible from your box of soa, or is not a valid URL.

  As a work around 10.1.3.4, I was able to create the XHTML file as follows:
  1 change the link partner of file adapter to use opaque scheme.
  2. in an assign operation, affect the load XHTML to a string variable using ora:getContentAsString ().
  3. Add a java embedding base64 encode the string as follows and assign to the entrance of the file adapter invoke:
  (HTMLString is the string from step 1 variable, InvokeWriteHTML_InputVariable is the input variable to the call on the file adapter operation)

  4. call the file adapter using the input variable in which is written the value encoded in base64.

  you could use the workaround above or rethink your design (if you want to create the XHTML file using bpel only or other means).

  Hope this helps,
  Kind regards
  Yohanna.
  http://www.prshanmu.com/articles/

• Satellite A210 - 11 p point of freezing by using the FN + F5 key - how to remove the VAP

  Hello

  I had a problem with my A210 - 11 p gel when I use the f5 function key to switch between the LCD and the tv.
  I read other posts and people talk about updating the value Pack.

  I downloaded it but it tells me to uninstall the old version by using Add or remove from the control panel.
  But the added value pack is not listed here. I thought that I would try to remove the utility Flash Cards, but that did not help and I had to install the 64-bit driver to get them back because once they have been removed I couldn't use the function keys!

  Flash cards are back so the 64-bit driver seems to work, but I think I have a 32-bit of Windows Vista.

  The other reason that I was updating the value Pack is that when I go to the TV and LCD, flash cards are not displayed and I have to use the f5 function and it is when the computer crashes.

  So, how can I uninstall the old VAP?
  Where he's hiding?

  Someone eles suffer this?

  And how do I know if I use 32-bit or 64?
  Sorry for the string of questions

  Thank you

  Mickey

  Hello

  Perhaps I should clarify that;

  First and foremost your laptop must belong to the PSAELE series.
  If you are not sure, check the bottom of the unit.

  The VAP may be withdrawn from Vista in Control Panel-> programs & features

  On my laptop A210 the PPV could be found at the end of the list of installed programs.
  I could easily remove it. But note that I used the Vista 32 bit.

  The VAP for _Vista 64bit_ is not available!
  On the European disc of Toshiba, you will only find programs simple but * not full * VAP package!

  I think it's the reasons why you don t see the PPV and cannot be removed.

  concerning