Performing a Firmware Upgrade using the integrated HP printers Web server

Similar Questions

• How to: Perform a Firmware Upgrade using the integrated Web server for HP printers

  Watch this video that shows how to perform an update of the firmware, using the built-in Web server for HP printers.

  Hope this video is useful if you find that it had to update the firmware on your HP printer.

• Performing a Firmware Upgrade using the built-in Web server

  This video provides step by step instructions to perform a firmware update using the integrated Web (EWS) server for single function of HP LaserJet and multifunction printers.

  For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.

  This video was produced by HP.

  I hope you find this information useful.

• HPE h9-1001de: HPE h9-1001de - broken graphics card can I use the integrated graphics card Intel?

  I bought this PC four years ago (just the version, not CS as in the link):

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03106002

  The integrated graphics went broken today. Research on the spec Web site I noticed that the Intel's integrated graphics. I won't buy another video card, if there is a graphics processor integrated into the processor.

  Indeed, there are two additional DVI ports; However, they are sealed with a sign "DO NOT REMOVE", and each port is sealed with two screws with a strange format (star with six faces?).

  Why these DVI ports are sealed? Why with this format live strange? I hope that's not for licensing reasons, and that I'm still able to use them as DVI ports...

  Thank you.

  Hello:

  I don't think it is sealed for any other reason than from your PC with a video of the add-on card, they would not people plugging in these ports DVI cables and by calling HP support complaining that the video does not work (because an add on card disables the integrated graphics card).

  Remove your discrete PCIe x 16 graphics card, so the built-in graphics card is enabled, put your hand on the good size torx screwdriver and remove the cover, so you can use the integrated graphics card adapter.

• I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  T

  I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  Thank you

  Yes.

  (137273)

• HP Pro 3130 microtour: use the integrated graphics card Intel H57 Council

  Good afternoon.
  Motherboard HP Pro 3130 Microtour here MS-7613.
  What you need to install the CPU, which it was possible to use the integrated graphics Intel H57 Board adapter?
  Poised the Lynnfield Quad Core Intel Core i7-870, 3300 MHz. It does not work with an integrated video card.
  External graphics in the PCIe slot only.

  Hello:

  Please refer to page 3 of the quickspecs at the link below... specifically the part where it says: NOTE: HP Pro 3130 with Intel Core i5 750 processor or any what Intel i7 processor has no integrated graphics card.

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04290878.PDF

  You will need to add a graphics card into the PCIe x 16 slot.

• Skyrim - using the integrated graphics card

  My Dell has a built-in Intel and a dedicated Radeon card. For the high range, such as Skyrim 3D games, I obviously prefer to use AMD, but the game is auto detection of the onboard. I've tried everything. I tried all ini files and that you can find no reference to intel or AMD, display or whatever it is. I have manually disabled the card intel in Device Manager, but then the game comes with intel base made graphic, I went into the bios to try and the value of the main graphics card to AMD, but I can't find it anywhere in the bios (which has very very few options) I also used the AMD Control Panel to set the game to run using maximum performance , but continues to use the map intel. Any advice would be appreciated, thanks Matthew

  You cannot set the AMD GPU as primary - it is not connected directly to the screen.  Only the GPU from Intel is directly connected - the AMD GPU is NOT a dedicated GPU.  It's a video coprocessor - all passes of video data by the Intel GPU on its way to the screen, even if it has been processed by the AMD GPU.

  If you selected the AMD GPU for the game by using the catalyst control center, that's all that is needed. No matter where you look under Windows, you will always see the Intel GPU as active.  It is a system controlled by software - controlled material no.

• When you try to upgrade using the Windows Anytime Upgrade feature, it tells me to use a different key.

  Upgrade in Windows 7 Home Premium to professional

  I have Windows 7 Home Premium (OEM Version) installed in Australia and bought a Windows 7 Professional upgrade key in the United States. When you try to upgrade using the Windows Anytime Upgrade feature, it tells me to use a different key, yet my upgrade pack tells me to use the Windows Anytime Upgrade feature! I bought the upgrade from a reputable store in San Francisco. Any ideas why it does not work?

  What is a retail upgrade or full version or an Express upgrade?

  If its OEM license, it will not work.

  If at any time the upgrade fails, Windows Anytime Upgrade Fail:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• CC 2015 Illustrator crashes when you use the function "save for Web".

  CC 2015 Illustrator crashes when you use the function "save for Web".

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering

• Can I use Centos on the merger as a web server "permanent"?

  Hello

  so I plan on using Centos 5 as a web server permanent through VMware Fusion.

  The goal is to be able to save all small pieces (MySQL database, web files, configurations...) of a Web server from a single blow.

  My worries...

  Should I open a session to launch VMware Fusion?

  Can I disconnect and keep VMware Fusion running?

  Thanks in advance for your help.

  Although VMware Fusion is not through its UI to provide functioning as a VM as a Service but yes you can do what you ask.

  Take a look on: [t-292873]

  Use the information in "Starting a Virtual Machine without user login" to start the Virtual Machine and the method suspends in the section "Shutdown / Suspend Virtual Machine on Mac OS X Reboot/Shutdown.

• What is the difference between Windows Web Server VS. Windows 7 with IIS

  What is the difference between Windows Web Server VS. Windows 7 with IIS

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet Forum. Please post your question in the TechNet Forums Windows Server général.

• Unable to run the following Wklds 1: [' Web server Tile0 could not start/finish: java specweb.jar']

  After you have installed the server model pre-built Web and then installation of Staf, jrockit and Specweb2005 1.2

  I try to run a Web server workload, and I get the following error:

  -

  ---

  20100630-16: 54:13 Info process: tile 0: Web server failed to start/finish. Re

  Tour: RC = 1, STAFResult = None

  20100630-16: 54:13 error Info: elapsed time too short, of tile 0 webserver run = 2

  2, length = 300

  20100630-16: 54:13 Info could not run the following Wklds 1: [' Web server Tile0]

  [could not start/finish: java specweb.jar']

  -

  ---

  Is there something I need to configure?

  • I tried to change the "Test.config" in the SPECweb2005\Harness, then get another .wrf as the attachment. **

  Thank you

  You should not change the Test.Config file.

  It seems that it cannot connect to your Web server.  Check that your Web server is running.  Check the logs at/usr/local/apache2/logs /.

  Also, make sure that you do not have a firewall running on your client.

• Can I use an existing Windows 7 Professional Upgrade DVD for Windows 7 Professional upgrade using the keys I bought instead of loading down?

  I've updated three of my computers from Windows XP Professional for Window 7 Professional using kits of DVD I bought. I have three sets of Window 7 professional DVD in my possession. I bought a new license [facility provided by Microsoft key] for my ThinkPad. I ordered also accompanying the DVD, which I imagine will happen next week. Rather than wait for the DVD, can I use one of my existing 32 Bit Windows DVD for installation to upgrade with the new license key that I got from Microsoft?

  No problem - but you might want to wait, if your existing DVD is the original version, because a new will have SP1 integrated, so it'll even some hassles :)

• OfficeJet 6500 Wireless: Win 10 - Solution Center - scan not performed as another program using the imaging device

  I upgraded to 10 Windows on a laptop ASUS, then updated the software for a HP Officejet 6500 E709n Series printer HP solutions Center.

  I can print successfully to the printer but when I open the solution Center and then try to scan an image or a Document, I get the following error "Scan cannot be performed because another program or computer using the networked imaging device.

  Extended error information is 8, [(0.18,-2147467259)]

  When I look in device under imaging devices Manager, two devices are displayed ASUS USB2.0 WebCam (1) and (2) Officejet 6500 E709n.

  It would be much appreciated if someone could help me solve this problem.

  Hi midnight-anwrs,.

  Thanks for getting back to me.

  I looked into your link "Printer problems after upgrade to Windows 10" and 6 "Scan with a scanning application" stage, I found the solution.

  I downloaded the "HP Scan and capture App" and can now easily scan photos and documents.

  Thanks for your help.

  Much appreciated,

  KenRabs

• The upgrade using the Windows 7 installation disc

  My OS is Windows Vista Home Premium SP2 x 64, and I intend to upgrade to Windows 7 Ultimate x 64 using the installation disc.
  Is it possible to do this (without the dual boot or formatting)?
  If so, are there disadvantages (i.e. lose any saved configuration, data stored or installed program)?

  First run the Windows 7 Compatibility Checker
  http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

  Windows 7 Upgrade Advisor
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15

  Here are answers to some common questions about the 32-bit versions and 64-bit Windows.
  http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspx

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  How to upgrade from Vista to Windows 7 Edition Home Premium:

  http://www.howtogeek.com/HOWTO/6892/how-to-perform-an-upgrade-from-Vista-to-Windows-7/

  Upgrade Windows Vista to Windows 7 (custom installation)
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom

  Note: Create as always a Vista of the Image backup before you start. Use a backup software utility that works in both Vista before the upgrade and once you upgrade to Windows 7 to create another backup.

  Acronis True Image 2012 - has a fully functional trial version of 30 days available.
  (Note: install Acronis and then create a bootable media restoration/rescue CD before you start creating your first image backup)
  http://www.Acronis.com/homecomputing/products/
  30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
  True Image User Guides and documentation:
  http://www.Acronis.com/support/documentation/index.html

  J W Stuart: http://www.pagestart.com