8.1 on Ideapad Windows installation - cannot be enabled

Similar Questions

• Windows Installer cannot be reinstalled or removed.

  Running Vista, Windows Installer cannot be reinstalled or delete. When I try to reinstall, I get 641 and 8007641 errors and can not install because Windows Installer does not work. Help?

  Hi earlemyers,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Start the Windows Installer service.

  (a) click Start, type Services.msc and press on ENTER.

  (b) double click on Windows Installer.

  (c) to set the startup type of Windows Installer to Manual.

  (d) click Start to start the service. Note the error message, if any. Click OK.

  Method 2: Unsubscribe and re - register the Windows Setup program. Follow these steps:

  (a) click Start, click run, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.

  (b) click Start, click run, type MSIEXEC/REGSERVER, and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.

  (c) try the application based on Windows Installer.

  Method 3: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 4: try to install the latest version of windows, install (Windows install 4.5).

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

• What can I do when Windows Installer cannot be excessed during the uninstallation of a program?

  Windows Installer cannot be excessed, or it does not.  How can I fix the problem?

  Hi Leapole7,

  1. This occurs when you try to uninstall a specific program?

  2. you remember to make changes to the computer, after which the issue started?

  I suggest to try the steps from the link to the following article and check to see if it helps:

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  I hope this helps.

• Windows Installer cannot find the "Crusher".

  How can I get rid of these annoying errors on windows install, impossible to find the "Crusher?

  The first message appears usually when I try to start a program or shut down the computer, 'Shredder.  Error 1706.  Valid any source not found for the mill product.  Windows Installer cannot continue. "If I click OK it starts a series of Wintows with"Please wait while we configure Shredder. "Come then:"the component you are trying to use is on a CD-ROM or another removable disk that is not available.  Insert the disc of "Destroyer" and click OK. "(I have no such disc.)  and "the path '1' is not found."  It's the bottom of the rabbit hole and I click on CANCEL.  No harm, no fault.  I learned to, click CANCEL has the first appearance of this embarrassing sequence of messages and as if I knew what I was doing.

  If someone out there REALLY knows how to "fix" this?

  Proudcon.

  Its caused by a third party utility that you have installed, possibly a maintenance utility

• Cannot install adobe reader on PC/windows 7, Message: windows installer cannot update managed products adversed. at least one characteristic of the product must be installed before applying the update.

  I can't install adobe reader on PC/windows 7, Message: windows installer cannot update managed products adversed. at least one characteristic of the product must be installed before applying the update.

  I don't know what means this message; try to uninstall it using http://labs.adobe.com/downloads/acrobatcleaner.html and then download and reinstall the last http://get.adobe.com/reader/enterprise/ player

• Windows Installer cannot find the Destination component

  After wash starts the Windows Installer window if poster once finished top of desktop. The process takes about a minute. Windows Installer message is, "Preparation for installation." Then, the Destination component appears with message "Please wait while Windows configures the destination component", and shows the progress bar. Then, the Destination component window appears with the message, "an installation package to the Destination of the product component is not found. Try the installation again using a valid copy of the installation package, "Destination. msi´."

  This package is not in my computer. This happens everytime I turn on the computer. The whole process is very long. How can I fix it so that the message?

  Thank you for your help.

  Hi lmcrae,

  Put your computer in a clean boot configuration to determine which product is responsible for this. Clean boot is a way convenient, safer to change the options for startup in the registry; You can turn individual items or disable freely to try various combinations up to that narrow you the problem. Once you find out, post details about the same so that we can take additional measures.

  Please see this article for detailed information on how to do it.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Ensure that you switch your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Installer cannot find readers

  I am trying to create a virtual machine (Windows XP) on a NFS mount.  I added the storage of the physical machine via VirtualCenter UI successfully.  I also use an iso of Windows XP for the installation that is on the same nfs mount.  When you start the virtual machine, windows install working (so is finding the nfs mount) but just after I click the F8 key to continue, Windows is unable to find records of the installation.  It's the classic Windows doesn't have the driver for this raid controller problem, but this time I use NFS for readers, so I do not understand what could be the issue.

  Leave it to BusLogic and just present this virtual disk that I linked in the previous post during installation.  The location where the virtual machine disk file is stored (NFS, SAN, storage Internet) shouldn't matter in your case.

• Update itunes on windows vista problems. the windows installer cannot

  "windows install could not be accessed. This can occur if you are running Windows in safe mode or if windows install is not properly installed. Contact your support team. »

  Ive read through the forums and tried everything what ive found. any suggestions? Thank you

  Hello JoeT767,

  If you have any previous version of Itunes installed on the computer, I suggest that you uninstall the previous version and you are trying to install Itunes.

  You can also try the steps in the article to resolve this problem:

  http://support.Apple.com/kb/HT1926

  Please ask your question on the Apple forum for a better answer to your question:

  http://discussions.Apple.com/category.jspa?categoryID=149

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• cannot find and install DSC20 installation msi packa. or the windows installer cannot continue? Please help. leaner

  Vista home preium. Dell laptop

  David, I tried for weeks the problem and at the end of the day, I contacted dell and said to do a reinstall. I did and it fixed the problem.

  Thanks for your help.

• Error code: the computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed etc etc, click ok.

  I bought a new computer and I get this error message. I can't speak to the seller until Monday and I have no disc to re - start. Any ideas?

  If you continue to try to get going, you can void the warranty.

  I suggest that you, you have to do anyway, wait until Monday and contact the seller or manufacturer of the desktop computer.

  See you soon.

• Windows Installer tries to install HP photo & Imaging 2.0 but lack of guard

  Each time connect appears the "Windows Installer - wait while windows configures the product software.  After it runs for a few seconds until then comes mistake 71706 no valid source windows installer cannot continue.  What Windows trying to install is HP Photo Imaging 2.0 - hp PSC 2100 series.  I don't want it or need it.  I tried to remove programs, but nothing happens.  Help someone!

  The following links may be worth a visit:

  "Every time I start and with other windows programs
  Setup appears and wants to install Photo Gallery! "
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_programs/each-time-i-start-up-and-with-other-programs/9b05b3ac-7834-4a0f-AA97-9146ac04885b

  "Error 1706' appears in Microsoft Windows during Scan
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01007968&LC=en&DLC=en&cc=us&lang=en&rule=19512&product=3204785

• Windows Installer Error 1706 unloading

  I got an error message on my PC... Error 1706. No valid sources were found for the unloading of the product. Windows Installer cannot continue.  I am running Windows XP Professional Version 2002 Svs Pk 3.

  Any help? Thanks, Ski Euro

  Euro ski,

  1 are Versions or autonomous components (WordViewer/Excel Viewer, etc.) of the installed office? If so, which?
  2. only the Windows Installer message occurs when you start the system upward?

  Restart the system first.
  Click Start > run
  In the Open: type in %temp% field
  Click OK or press ENTER.

  Move all the contents of your user Temp subfolder to the trash for now.
  Restart the system.
  The message still appears?

  Expert MowGreen Windows IT Pro - consumer safety

• 2203.database ERROR: C: \windows\installer\21ba172a.ipi-2147287035 system error

  IF I INSTALL THE NEW OR DATE ON ANY PROGRAM I GET THIS ERROR. WHAT IS THE SOLUTION.

  THANKS :)

  Hi Dan,.

  This problem can occur if Windows Installer tries to copy the file into a directory, but can't due to a permissions problem. This occurs most frequently when the SYSTEM user has no permissions in the target folder.

  Please answer a question, so that we can properly diagnose this problem:

  You did changes to the computer before this problem?

  Before you change permissions, try a few others not:

  Method 1: run this utility of automated troubleshooting.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall/?WA=wsignin1.0

  Method 2: check if the Windows Installer service is enabled and set to automatic.

  a. on the desktop, press Windows key + R to open the Run dialog box.

  b. type services.msc in the Run dialog boxand press Enter to open Services.

  c. right click on the Windows Installer serviceand then click Properties.

  d. if the box Startup type is set to Disabled, change it to Automatic.

  e. click OK to close the Properties window.

  f. right click on the Windows Installer serviceand then click Start. The service should start without errors.

  If you receive any errors, please let us know.

  Please get back to us with the State of the question.

• Boot Camp Windows Installation 10 - "Windows cannot be installed to this disk. It's the GPT partition style.

  Hello

  I tried to dual boot Windows 10 alongside OS X El Capitan on my iMac 21.5 inch i5 end 2013. I have followed all the instructions in the Boot Camp assistant, restart, choose the yellow 'Windows' drive to boot from, but when I get to the Windows installation, enter the product key and language, and then select the partition (0-4, the partition Disk Partition) it tells me that "Windows cannot be installed to this disk. The selected disk is the GPT partition style. »

  So I found this answer: How do I install Windows 8.1 on Haswell MBP

  But then I received the same error.

  Tried this: http://macriot.com/mcrt/?p=2362

  But fdisk TPG allow me to change anything, as the SIP is enabled.

  Tried to disable SIP via a command line in a terminal in recovery mode, but got an error-bash: command not found csrutil.

  So now I'm stuck on all fronts. Any ideas?

  Thank you

  RedPanda

  1. your iMac end 2013 supports the facilities of BIOS/MBR and GPT/EFI.

  2. the legacy BIOS/MBR method requires a hybrid MBR.

  3 EFI/GPT is recommended for your specific model.

  4. you can use the GPT Fdisk steps in your link to make your drive a GPT disk only. It is not enough.

  5. you will need to convert the FAT32 partition space using the following OS X Terminal

  diskutil eraseVolume free disk0s4 FREE

  This will return an error, because free space is not associated with disk slices.

  6. at this point, use the USB installer created by the wizard of BC, boot from it and hold down the Alt/Option key and select Boot EFI (not Windows). Point to the portion of the free space that you see after the + 620 MB Recovery HD. It will separate into a small (128 MB) MSR and the rest as MSD (NTFS).

  7. do not install W7 in Boot EFI, because it has some difficulties.

  8. when Windows is installed, and BC drivers are not installed, run setup.exe from the Bootcamp folder.

  9. If csrutil is not found, you are in the recovery of the Internet, because your local Recovery HD is corrupted. The rescue of the failure of the local recovery is restoration of Internet. Your must be on El Capitan. There is no csrutil (or SIP) before El Capitan.

• error on Windows 2008 server std edition "Windows could not update the Configuration to start the computer. Installation cannot continue. "

  I try to install windows 2008 server std edition on HP DL 380 G5 server, I am getting error while installing "Windows could not update the Configuration to start the computer. Installation cannot continue. ", please suggest?

  I tried also with HP smartstart CD, but failed.

  Thanks guys, I found the answer to my question, I used the last HP smart Start CD (V8.70B for windows 2008 server X 64) for DL380g5 for windows 2008 server STD, and it worked fine.

  For the Smart Start CD list visit: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=344318&lang=en&cc=nl&taskId=135&prodTypeId=18964&prodSeriesId=345557
  Thank you...