8.1 update will lose everything I have just to download?

Similar Questions

• Fix KB2518864 & KB2478658 updates will not install and have a problem. How to solve this action?

  Fix updates KB2518864 & KB2478658 will not install and have a problem. How to solve this action? This fix tries to install when arrested computer, but when the computer is turned back on, there is a box which reads:

  Patching HOTIRON Setup has encountered a problem and needs to close. We are sorry for the inconvenience.

  Hi MrGreener,

  1. did you of recent changes on the computer?

  2 are you able to install all other updates on the computer?

  3. do you have security software installed on the computer?

  4. you receive an error message while updates?

  Method 1

  I suggest that you manually download and install updates, check if it installed correctly on the computer.

  Security Update for Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26323

  Security Update for Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26427

  See also the articles below to learn more about known issues for both updates and check if it helps.

  MS11-044: Description of the update of security for the .NET Framework 3.5 Service Pack 1 and the .NET Framework 2.0 Service Pack 2 on Windows XP Service Pack 3 and Windows Server 2003 Service Pack 2: Jun

  http://support.Microsoft.com/kb/2518864

  MS11-039: Description of the update of security for the .NET Framework 3.5 Service Pack 1 and the .NET Framework 2.0 Service Pack 2 on Windows XP Service Pack 3 and Windows Server 2003 Service Pack 2: Jun

  http://support.Microsoft.com/kb/2478658

  Method 2

  If the previous step fails then I would suggest that reset you the default Windows Update components and later try to install updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Updates will not charge they have not properly configured. error 80246007

  Response of the system is that they are not configured acorrectly. Error message refers to 80246007. I tried, but they don't always load. They interrupt to appempt at any time to recharge.

  Try the procedure described here: http://support.microsoft.com/kb/971058

  as well as the verification of the system for errors: http://support.microsoft.com/kb/929833

• I received email indicate that I need to update my account with hotmail or I will lose what has been sent to the hotmail team is this true

  I just receive e-mail from hotmail team

  They told me to submit my nickname my password for updating the locations is this true

  If I had not made it within 7 days I will lose everything

  It's a scam.
   
  Closing account Hotmail Phishing Scam
  http://www.Hoax-Slayer.com/Windows-Live-Hotmail-phishing-scam.shtml

• updates available for various cs5 applications, but the updates will not install

  I was warned of the updates are available for photoshop cs5 and other associates cs5 updates, but the updates will not install.

  can manually download and install updates and the following text error occurred for all updates.

  Also acrobat adobe 9 will not be open to all.

  Pls help, thanks

  

  I think you need to update to the latest version adobe application manager and the help > updates

  from photoshop cs5 should then work.

  Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager

  It is also possible that you may need to change your security settings

  in Apple > system preferences > Security & Privacy > General to allow downloaded applications on > Anywhere

  before the automatic or manual update downloaded the updates to work.

  

• I have an Acer computer I want to do a total restore. It came with windows 7 starter edition, and then I bought Microsoft word for it. If Microsoft word will lose if I do the restoration?

  I have an Acer computer I want to do a total restore. It came with windows 7 starter edition, and then I bought Microsoft word for it. If Microsoft word will lose if I do the restoration?

  If you purchased Word on CD, it's no big deal; just reinstall it after the factory restore. If it was bought online, copy the file downloaded to a CD and then reinstall it later.

  Is there a particular reason, why you want to do a restore complete? Have you problems? If so, you can try asking here on how to fix them and do not have to do a restore, reinstall all your programs and all of the updates and service pack 1.

  SC Tom

• Creative suite 4 master collection of error installation will not install Premiere Pro, still, indesige, flash, ps4, sequelae.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running. 

  Creative suite 4 master collection of error installation will not install Premiere Pro, indesign, flash, Photoshop and AfterEffects.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running.  Running windows 7 64 bit.  Had no problem with installation on my last computer 64-bit windows 7

  It seems that everything is installed now.  Don't know how, but I think that I opened it as administrator.

  Thank you

  Corey

• I have a user who no longer works for the company.  Someone took his place, the same computer.  She used the same account as the former user.  I would like to delete the old user and assign the new.  It will lose something if I do this?  I shouldn't

  I have a user who no longer works for the company.  Someone took his place, the same computer.  She used the same account as the former user.  I would like to delete the old user and assign the new.  It will lose something if I do this?  I wouldn't reinstall anything, right?

  Hi Greg,.

  You won't lose any application on the computer.

  You can remove a user from the license and assign it to another user according to the help below document:

  Using creative cloud | Manage your creative cloud to the membership of the teams

  Kind regards

  Sheena

• Critical updates will not update automatically, even if I have them on demand.

  I didn't know anything about these 3 critical updates. I found them, by chance, allowing Microsoft to determine whether there are updates. I have the system plans to make the automatic updates.

  And, in the same vein: there were 99 updates which do not settle. Why? Why? Why?

  Hello

  1. don't you get an error code / message when you try to update Windows?

  2. have you made any recent hardware / soft ware past to the computer before this problem?

  3. who has three critical updates are you referring to?

  Method 1:

  Perform a clean boot and check if the problem persists.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After troubleshooting follow the,

  How to configure Windows to use a Normal startup state

   

  Method 2:

  Try to download updates manually and check if it is installed.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  Method 3:

  Try to perform the steps from the link below,

  Cannot install Windows updates:

  http://support.Microsoft.com/kb/555461

• New update for Win 7 32 - bit XP - Windows Update will not, so have to do manual updates - that need me?

  I updated from XP to 7 Edition Home Premium in mid-March and have tried since then to run Windows Update, but I get the ubiquitous endless "check updates". I spent hours trying all of the fixes I could find (and understand) with no luck. So I decided to just manually download at least the critical updates, but I have no idea of what updates I need. I have Service Pack 1 and my system is 32-bit. I have 13 updates installed that I downloaded and installed in March because they seemed like it might be useful (I don't remember what most of them were for the moment), but I stopped here because I really didn't know what I was doing, or what I needed and I went back to try to fix Windows Update , but I gave that up. So, does anyone have a list of updates I should keep Windows 7 works correctly? Or should I say to hell with it and download Windows 10? I know my time is short if this is my best option. Any thoughts, advice, ideas, help welcome.

  It is not too hard to do. The value of the automatic updates to "never check updates" and then restart Windows. Download and install KB3020369 and KB3161608.

  https://support.Microsoft.com/en-us/KB/3020369

  https://support.Microsoft.com/en-us/KB/3161608

  Then, use Windows update again.

  Best regards, VZ

• The Apple software update will not install updates

  Each time the Apple software application to be updated by Apple Software Update, the error in the picture below opens and I get it over with to have to do a manual reinstall.  Here, the image shows the most recent upgrade to iCloud and iTunes, but I also got QuickTime are doing the same thing.  It would seem that each manual installation to reinstall a new copy of the GSS, but he keeps having the same problems. Please help diagnose this problem.  The "Download only" option in the window pop up works, but it would be nice for ASU than him.

  An update of the software is pretty useless if it is not updated of software.

  

  I suspect that all is not well with your copy of the GSS. You can try to fix it, but I suspect a complete tear down and reinstallation of any software Apple will be needed.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• I will lose IE8 on my computer if I download foxfire on my PC?

  I still need Ie8 to run some of my childs home school sites. Still others will not pull up on IE8 or say that they will not work properly and update to a current browser... Will lose I have IE8 so I download foxfire? I'll still be able to make hughesnet what appears first on my computer (which has my favorites on it) when my computer starts? I use Windows xp and have IE8 as my browser curent - IE9 does not support xp more... what to do to programs that say updated browser to use this site? How do I still need on IE8? Sorry, but I'm not a guru computper... help?

  Moreover, there are some unscrupulous sites offer contaminated downloads of Firefox. You can get the official download on the homepage of this site: https://www.mozilla.org/

• iPad will not update - will be only update one application at a time

  I have a curious problem. Recently, I noticed that I have available updates for applications all the time that have not been downloaded. I see a red circle with a number on my App Stpre app - this didn't use to be the case because the iPad would be updated automatically.

  If I go to the App Store manually and hit all the updates on the updates page waiting all the buttons update app turn to the circle download for a minute and then just go back to update buttons. Nothing is updated.

  Here's the first twist:

  If I try to update by using the UPDATE of each unique application, it will work as long as I don't need to update the application at the top of the list.

  This is the second twist:

  If I update all apps agree only a first, then I remove that first, the next time that the iPad gets new updates to download the top app will get stuck again (some app is) and I have to go and manually update again. So it doesn't seem to be the result of an individual 'bad app.

  Anyone know what I can do to try to get my iPad to begin the auto process

  It's one of the most bizarre App Store update problems I've seen in a while. I guess you trid steps basic troubleshooting, but just in case you don't have it, try the following steps and do them in this order.

  Force close the App Store App. Press twice the House quickly. You will see small glimpses of your applications recently used. Swipe to find the app store App shot upward on the overview of the application to close.

  Next force restart the iPad. No data is affected by this. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  If this does not help, try this. Reset all the settings. You won't lose any data, but most of the settings of the device will have to be entered again in the settings app. This includes passwords for WiFi network, paper settings painted. SIri, privacy settings, etc.. Settings > general > reset > reset all settings.

  If all else fails, you can restore the iOS software. Backup your iPad before you restore, and then restore the backup when you are finished. If this doesn't always help, restore your iPad like new and all over again. Most bought content can be downloaded again free of charge as long as you use the same ID Apple and as long as the content is always available in the store.

  Restore iPad to factory settings

  http://support.Apple.com/kb/ht1414

  Download last purchases

  http://support.Apple.com/kb/ht251

  Restore factory settings may seem exaggerated, but it could end up being what you need to do to finally solve the problem.

• Photosmart HP 7520: All wireless network devices will lose connectivity after printing

  Dear all, 
  
      I have a problem with my HP Photosmart 7520 printer where all wireless network devices will lose connectivity after a printer has been sent to the printer.
  
  * Summary
  Wireless network unusable after sending one print to HP printer
  No device ( computers nor smartphones ) can use the Internet nor access internal networks ( 192.168.0/24)
  
  * Details
  Turn HP printer on.  ( wireless direct is off - never turned on )
  HP printer connects to working wireless network.
  Other devices ( phone/computers ) already connected and working.
  From any device, send a document to the printer.
  Printer prints document successfully.
  Immediately after printer has printed all devices cannot access internet IP range ( including HP printer ) nor Internet nor router ( 198.168.0.1 ).
  
  * Reproducibility
  Always
  
  * Work around
  Disconnect all devices from the network.
  Power off printer.
  Reboot Internet router.
  
  * Attempted solutions
  Removed wireless configuration.
  Factory reset.
  Added wireless configuration back.
  Powered on and off printer.
  
  * Printing tested with
  Tested with Macbook10.11/Windows 8/Ubuntu 12/Android 4.4.2
  
  * Not tested
  Ethernet cable directly connected to router.
  
  * Internet Router
  Netgear CG 3700
  

  Number of brand and model of the router?

  These settings are to set up your printer wireless (or wired):

  • Stay connected to your router
  • Trouble printer status 'offline '.
  • Wake mode 'sleep'
  • All wireless devices stay better connected

  While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP.  After the adjustment of the static IP address the computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here.  Video here explains the problem and how to solve the problem. <--> So watch this!
  2. Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).

  Additional measures to take if you continue to have the problem (if they are posted)...

• If I upgrade to win 7 I will lose data stored vista files?

  can anyone help? If I update to windows 7 I will lose data stored. That is, movies, music

  An upgrade maintains your files, a custom installation does not work. It's a good idea to back up your files before upgrading to Windows 7.

  Back up all your files and settings to avoid losing documents, photos and other information. Windows Easy Transfer is a free tool to copy files (not programs) from your PC and then transfer back after installation of Windows 7. If you don't want to use Windows Easy Transfer, you can copy your files to a Flash DRIVE or CD/DVD. Note: The easy transfer will not work when changing languages, or when moving from 64 bit to 32 bit (it will work ranging from 32-bit to 64-bit).

  http://Windows.Microsoft.com/Windows-easy-transfer

  How to upgrade:

  If you have Vista:

  Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7

  New installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

  Installation - 'upgrade' means what?
  Upgrade means that you can install Windows 7 simply by inserting the Windows 7 upgrade software in the DVD drive of your PC and follow the instructions on the screen. While you are not required to backup and reinstall your files, or reinstall your programs, it is a very good idea to back up your files and settings before you start any upgrade to the software. Get more information on the software updates and best practices .

  Installation - what does "Custom (Clean)" Mean?
  A custom (clean) installation clears the contents of the hard drive of your PC. Your files, settings, and programs will not be transferred to Windows 7. This means that to install Windows 7, you must:

  • Back up any files and settings you want to keep

  • Install Windows 7

  • Reinstall all your files

  • Reinstall all the programs you want to use.

  These four steps take time, skills, techniques and Windows Easy Transfer can help. However, if you are not comfortable with this process, please consider having the installation carried out by a local service provider.