8.1 win very slow on HP 15 P010

Similar Questions

• manipulation of file/folder Win 8.1Thunderbird very slow

  Long story short: Win 7 has been corrupted, so I installed Win 8.1. All programs work well, with the exception of Thunderbird. Any action of Thunderbird is extremely slow, up to a few minutes to perform any action. The program is unusable in normal windows mode. However,.

  Thunderbird works fine in safe mode, even with the antivirus software (Iolo / System Mechanic) currently running.

  A cause may be that any action I take with files bigger than a few bytes of Thunderbird is very slow. Copy, move, delete all the files of Thunderbird is extremely slow. I tried to copy other big files and folders in the T-bird folders and delete them, and they work fine. It's just the Thunderbird files that seem to be stuck in the glue.

  I added Thunderbird to my allowed firewall programs, so this is not it.

  I uninstalled and reinstalled Thunderbird, nothing helps.

  There may be other things that you must disable in System Mechanic, such as analysis of messages incoming and outgoing and scanning of attachments.
  Alternatively, you can ask in a forum for System Mechanic.

• Satellite L855-14R: games running very slow after installing Win 7

  Hi guys,.

  I have the L855-14R satellite, which came with windows pre-installed 8.

  I used win 8 during a time and games have been works ok.
  So I decided to install a copy of windows 7 ultimate 64-bit.

  I downloaded all the drivers from toshiba support and it seems to work fine until I started the same game I played before.

  He was running very very slow even on low graphics settings.

  No idea of what went wrong after the win 7 installation?

  Have Hmm you installed the driver of ATI graphics card?
  Maybe the game uses the Intel HD internal graphic that is part of the Intel Core i7-3630QM processor?

• Very slow internet connection on Win 7 on SSD, but works very well with the OS on the HARD disk and the mode safe on SSD

  Original title: network very slow connection on the current installation of Windows?

  So my situation is that I have two disks (SSD and HDD) who both have a Windows installation.

  Because this SSD is an I got free and is in used condition, I left my copy of Windows 7 intact on my mechanical failure of the SSD drive.

  Now the question is, my internet connection is very, very poor, unless I run in safe mode, or the installation on my mechanical drive.

  I use a wired connection, and our connection at home is limited to 120/10 mbit/s, while I have 5/10 at the most.

  I tried to replace the LAN drivers of my motherboard (MSI FM2-A85XA-G43) using both the driver disc that was bundled with my motherboard, Device Manager and the official site of MSI, I also checked my entire system using Malwarebytes, which detected 7 threats and were abducted, nothing helps.

  I also tried the DNS which did nothing either of hot flashes. Now notice what computer of my brother is also connected and works well.

  Now as I type this, I discovered that my speed has suddenly got stable again out of the blue, but I'm skeptical it will remain, so I still want to ask what is / was going on here.

  Thank you for your time.

  Sorry for the late response here, I've been very busy with the developments in the last days and completely focused on it.

  More than a week has passed since the problem disappeared as if by magic, and so far I don't see the signs of what is going on again.

  I think that the problem has passed away now, but if it arises again I will probably update this.

  Thanks for all the suggestions and your time in this issue.

• The program is very slow to start and then when running. Caused by McAfee "Active Protection".

  Win XP Professional operating. TO 38.3.0 with lightning 4.0.3.1

  Since the update of the program, it became initiate very slow and when finally the opening is generally slow, all around. Perform simple tasks like move a file, the program seems to wonder off into outer space. If you try to do anything but the program reports a message "do not reply" up to what he ended up doing ing to the first task. More often or not, he then proposed the following message is displayed.
  "" Script: chrome: / / Script: chrome://messenger/content/mailWindow.js:17messenger/content/mailWindow.js:17 ".

  Anyone got any ideas how to fix this?

  Thanks for the feedback of results

• have I not the right plug ins auto update 38.0.1now very very slow

  yesterday it automatically updated to 38.0.1. It is now very very slow. running win 7 32-bit. tried to update two times, uninstalled and reinstalled without help. plug ins look different and do not know if they are the right ones. also, yesterday I went back to an earlier date and while ms has been updated 26 updates so was firefox. The rest of the system seems ok. Thanks for your help.

  Hi veryslow, please disable graphics hardware acceleration.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Open the Firefox Options tab as follows, click on the menu button

     

     then select Options.

  2. In the Options of Firefox tab, click Advanced, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Uncheck this box.
  4. Now restart Firefox and see if the problems persist.

  This solve your problems? Please report to us!

  Thank you.

• my mac is very slow; I also use Parallels

  On my imac late 2013; 2.7 ghz; 8 GB memory, I use paralles 11 to work with win10.

  My mac is very very slow and even sometimes hangs. Is there something I can do?

  Thank you!

  Chris

  you have started to win 10 in native mode or are virtualize you all the time?

• Navigation between windows diff in firefox is very slow. Help, please.

  Firefox responds very slowly when I want to go to a different window that is already open, or if I press on + Options button to open the new window / tab, the response is very slow. Sometimes firefox responds at all, a message arrives that "Firefox is not responding", and after that the browser starts to reload all pages. It's pretty boring. Kindly help.
  I use WIN 7. the system has 3 GB of RAM, 2.2 GHz processor from intel, 32 bit OS.

  I deleted the sessionstore.js and .bak files and then reset the browser. This accelerated its response. thnx a lot to you two.

• Satellite L300-1 has 3 and WXP - computer laptop is very slow

  I installed Windows XP computer laptop Satellite L300-1 has 3.
  After portable installation is very slow, I think that the problem in the SATA driver.

  Please send me the driver SATA for Windows XP Home edition, or please give me the solution.

  Thank you

  Hello

  May I ask how you installed Win XP?
  Did you change the SATA mode on compatible in the BIOS settings?
  If yes then this problem is related to the missing SATA drivers!

  You can find the SATA drivers in the Intel Storage Manager which is placed on the page of European disk from Toshiba!

  Launch the .exe with the settings file a p

  For example (the files will be unpacked in the storagemanager folder):

  c:\downloads\iata_cd.exe - a c:\storagemanager Pei

  An accurate description, you will find in the Readme! Read it!
  Then you will get the unique file which could be included for Win XP CD using nLite software!

• Satellite Pro U300 very slow opening programs

  Hi all

  I bought a Satellite Pro U300 in February 2008 and I only use it 3 - 4 times since then... It is very slow at the opening of the programs (I have only one statistical program installed) and Web pages and creates problems when I try to download other programs that have a different version of Windows Vista.
  I really regretted buying this phone and I'm looking for someone to sell.

  Until I do, I was wondering if I could uninstall Windows Vista and install Windows XP for example, or do anything else that would make my phone fun to use.

  Anna

  Hello

  The preinstalled operating system ran slowly because many applications are running in the background.
  My laptop was slow too to experience of applications have been disabled.

  You can disable in MSCONFIG.
  Type msconfig window RUN and check the Startup tab.
  You will find the software that could slow down the operating system.

  With regard to the installation of Win XP.
  Yes, you can also install Win XP. By using the Win XP laptop should be little faster because Win XP doesn t need a lot of material resources.

  Welcome them

• Very slow connection to the LAN on my Tecra M1

  Hi all

  I use a Toshiba Tecra M1 1 .6GHz, Win XP.

  I found that there is a problem with the connection to the local network. It is very slow. I takes about 5 minutes to download 1 MB. It's really a lot of time if I want to download and update some software over the internet.

  I also have an office. It is quite a bit old but the connection to the local network is much faster than my laptop; for example, I downloaded Windows Mediaplayer 10 - about 12 MB by using desktop and laptop at the same time to compare, the Office has taken 2-3 minutes while the laptop ate more than 20 minutes. I switched the cable between the office and cell phones, but it did not help.

  We know the problem and the solution?

  Much thanks.

  Hello

  Nick is on the right track. Who knows what runs in the background and applications who wants to access the internet. I recommend you to use the tool called Zone alarm. On this way, you will have full control over the applications that want to access the internet.

• Satellite L505-144 - flash memory transfer speed is very slow 1.45 Mbps

  Hello

  I have a Satellite L505-144 and installed the system Win 7 64-bit *.
  The problem is when I move or copy DATA using Flash memory, transfer speed is very slow 1.45 MB/second and I try the same memory Flash on another PC its work too quickly it move 22 MB per second

  What is the problem?

  Hello

  What is the status of the SATA mode in the BIOS?
  It must be set to AHCI.
  If it s set to compatible, then the SATA benefits can not be used
  Check it!

• Win 7 slow start - connection with fingerprint reader

  Hello

  I have a T400s (2.4 GHz and 4 GB) with an Intel SSD and WIn 7 RTM with the last drivers beta of Lenovo.

  I have the fingerprint reader enabled for the connection and my startup time of 35 seconds is now shared almost half in the connection of fingerprints and the other half in the rest of the startup procedure.

  Or (the finger) described another way if the machine is turned off and I slide my finger to start the machine, it takes about 17 seconds before the fast logon is indicated.

  Then the machine says 'pending' for 15-20 seconds during which my personal connection icon is flashing by until it ends the connection and almost immediately displays the desktop.

  I am surprised by the very slow connection with my finger already slipped. It would be much faster to turn off fingerprint reader and connect using a password. Someone had this problem and knows how to fix?

  Other problems with the boot, I found (and fixed) is the use of a solid as the Windows background color which, for some reason, costs about 15 seconds at boot time! I also had to reflash the firmware of my SSD to win 10 extra seconds at the beginning of the startup procedure.

  Carpet

  Hello again,

  Sometimes I had to wait several seconds after sliding my finger, to the process of connection of kick. I checked the event viewer on my thinkpad T400 and found the security processes that are at work when loggin. I have excluded them from protection against viruses (Microsoft Security Essentials) and restarted the computer. When the logon screen appeared, I spent my finger and boom, the connection process began immediately.

  Excluded processes are:

  C:\Windows\System32\LogonUI.exe

  C:\Windows\System32\winlogon.exe

  JES

• Games led by 7 Microsoft running very slow and draggy

  I still have a problem to play all the games on my new computer, which is managed by Windows 7.  The game runs very slow and response of the mouse and other controls are slow and draggy.  Please notify.

  What video card you are using as well as the model and brand of PC?

  Have you updated all readers more recent? If this is not the case consult your OEM and download all the latest drivers for Win 7

  MCP. MCDST. LVL 80

• How can I improve the performance of my compaq presario V2000, its very slow

  How can I improve the performance of my compaq presario V2000, its very slow!

  According to many things (specifications, you have now installed vs the programs he came originally with programs, etc.)-it may or may not work better that ever he does now.  However, in terms of nothing other than the software and others on the subject - there are some things you can do to optimize performance.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do some cleaning and dusting off this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your WIndows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.