8 reinstall without backup Windows

Similar Questions

• Can I uninstall Windows XP and reinstall without losing data?

  I managed to destroy my XP installation so bad that I can't retrieve it using the original installation CD. can I uninstall and reinstall without losing all my backup files? Thanks for any help or advice

  Hi abbyhunt,

  See http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/how-to-format-a-windows-xp-computer-without-losing/654fe0ed-9e49-e011-8dfc-68b599b31bf5

• Windows Vista reinstall without installation disc (Acer Aspire 6920 G)

  Hello

  I would like to ask for help. About a year ago I bought this laptop with the original Windows Vista validation but key without a Windows Vista installation disc. Now, I would like to reinstall my system.

  I downloaded the file .iso Windows Recovery (of size 120 MB), it burned down and tried to reinstall Windows. I got to the stage where I type the validation key, but always when I typed that key, it appeared that the key is invalid (I checked this certificate stuck on the laptop and it seems to be original).

  Thanks in advance

  This is NOT a Vista reinstall the drive, it's a record of STARTUP repair!

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition t put it back to factory settings.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

   

  Normally, they do this for a cost of $ small.
  

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11, Acer is normally Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a PC with windows 7 Home Premium installed. The PC is faulty and cannot be resolved. Can I reinstall the same Windows 7 to a new computer without additional cost?

  I have a PC with windows 7 Home Premium installed. The PC is faulty and cannot be resolved. Can I reinstall the same Windows 7 to a new computer without additional cost? If yes how can I do this? Some people reported issues license keys and it cannot be registered once in a PC.

  Thank you

  It is the major limitation of the OEM software that it can be installed on a PC. The COA label will confirm whether the license is OEM. A number of elements can be replaced in a PC in the way of repair, but only if exactly the same model of Council can this be exchanged.

  Even if you transfer the drive to the new PC would not authenticate because of the change of equipment, and it would be unlikely to to re-authenticate online.

  If the label is not OEM and you have a retail package, so it can be transferred.

• A message to reinstall: MapI32.dll (Windows Search.exe) how to re - install.

  Original title: Reinstall: MapI32.dll (Windows Search.exe)

  After the installation of the update of Windows 8 for Windows XP, I get an error dialog box that indicates that I have to reinstall MapI32.dll (Windows Search.exe). How do I reinstall and why this happens?

  Thank you.

  E-mail address is removed from the privacy *.

  I can assure you with certainty at 100% none of Microsoft has 'expert' ideas Support Engineer will not replace a missing mapi32.dll file.

  These ideas are just more of their wild goose hunting to waste your time and get the points by posting useless ideas, not tested until they have links to the KB articles which will not work.

  First, nor fashion all safe or clean boot replaces a missing file.

  Second of all, the System File Checker don't know or don't care that file - and for the millionth time, I repeat is not what SFC/scannow, this isn't how it works and it's not what it is for.

  Everything that this alleged "expert" needs to do is re-create the problem (which takes about 10 seconds) and to apply their own prosecution goose to see that none of these ideas will help.

  Perhaps one day, these 'experts' will learn how XP works.

  If I were Microsoft, I'd be embarrassed and ashamed of these representatives (then I would lay off).

  If you mean that you see a message like this:

  WindowsSearch.exe - Unable to locate component
  This application has failed to start because the MAPI32.dll file not found.  Reinstalling the application may fix this problem.

  If the file is missing, it may have been quarantined (effectively removed) by your antimalware/antivirus application not specified on your unspecified brand system and model with unspecified XP version and unspecified Service Pack, but you can replace it.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file named mapi32 when the name of the file should really be called mapi32.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the files downloaded to the appropriate on your system folder.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• Backup Windows install acer aspire 4330

  HI, team of Acer, I use Linux (dual-boot) with windows. I would like to remove windows, how do I backup windows install so if something goes wrong, I can just pop in a disc and reinstall windows? If any other information is needed I can provide.

  Well, while being in disagreement with your decision, I have found this procedure to create a recovery disc for an Acer laptop. Please keep in mind that the process may vary slightly with different patterns:

  To create your recovery backup disks, follow these steps:

  1. Click on the Start menu, and then click all programs.
  2. In the list of programs, click the Acer file, and then click the Acer eRecovery Management .
  3. User account control Windows may request your permission to run this program, click Yes.
  4. In the Acer eRecovery Management window left click backup, and then click create a default disk factory.
     Note: If you use a laptop or netbook, you will be asked to connect your power adapter, make sure that the power adapter is plugged in before continuing, and then click OK.
  5. In the page to create a default disc factory select the drive you want to use for burning the recovery media, and then click Start.
  6. The disc is ejected whenever he has completed burning, if several drives are required insert a new disc when you are prompted, and then click OK.

• Backup Windows will not open

  When I try to start the Windows backup or by going into Start Programs/Accessories/backup or by double-clicking the backup file, I am interested in the restoration of I get a small blank window with the title "backup utility".  The Task Manager shows that the ntbackup.exe process is running, but it is does accumulate no time CPU and do no readings or writings.

  I will try to reinstall the program, but since I have XP Pro instead of XP Home my Windows CD doesn't have the '\ValueAdd\Msft\Ntbackup on the CD folder '.

  Any suggestions on why ntbackup.exe behaves this way?  Is it possible to get the installer ntbackup so I can reinstall?

  I don't know if it's important or not, but last year I installed Norton Security Suite, which includes its own backup utility.  Unfortunately, its default filters save the Directory Application Data that I need to restore, where my need to use the utility backup window.

  Hi MalcolmDavis,

  The Windows backup utility is already built into Windows XP Professional. Try these steps and check the result.

  Step 1: Run SFC (System File Checker) scan to see if all the system files are missing or corrupt
  a. Click Start, click Run, type cmd and click ok.
  b. at the command prompt, type sfc/scannow and press ENTER.
  c. If you are prompted, enter the Windows XP CD in order to complete the scan.
  Note: The version of the service pack on CD must match the version of the service pack installed on the computer.
  d. restart the computer and check the difference.

  See Windows XP Scan SFC

  Step 2: If the problem persists, check if you can run backup in safe mode to see if another program is causing the problem in normal mode
  a. see the Description of the Mode of course in Windows XP startup options
  b. in the menu advanced startup options select Safe mode and press on enter.
  c. check to see if you can run backup.

  Step 3: If the problem does not persist in safe mode, check if a non-Microsoft program is causing the problem
  see How to configure Windows XP to start in a "clean boot" State .
  b. in the article, follow the method 1 and method 2 to find out if any program is causing the problem.
  c. Once you have found the culprit that is the program that is causing the problem, then uninstall it.

  Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Set up a planning for backup windows on windows server 2008, but it can get backup

  I use a windows 2008 R2 server.  I implemented a backup on this server schedule to back up files to a remote shared folder on our server which performs backups of our entire company.  I can get through the Scheduling Assistant without backup problems and everything seems correct, but when the time comes to start the backup it won't proceed with the backup.  Once past the backup start time and then it will tell me the next backup will be tomorrow at the same time.  He never tells me the backup failed, either that he has in the past, it's like she's not even read the new scheduled backup and I am all of these possible solutions.

  Hello

  These are some Vista Forums

  Repost in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Cannot reinstall Dell backup and restore support center

  Hello

  A new Inspiron 3521. Upgrade to 8.1 Windows before you create backup discs. Now when I try to create the backup, get the message:

  Reinstall Dell backup and restore

  To use Dell backup and restore with this version of Windows, you must reinstall it from the original installation media or download files. If you are unable to locate the files or media, contact Dell, the manufacturer of Dell backup and restoration for more information.

  Cannot access it from support center - only lists updated, pilots not original (I already installed). When I try to do a scan for drivers, it never ends (leave it on for hours).

  Can anyone help? Thank you.

  Hi Debsdell

  Sorry for the late reply. Please follow the steps mentioned below for the resolution of the problems.

  Has) Uninstall Dell Backup and recovery program

  1. Enter in the right edge of the screen and then click on search.
     (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click Find.)
  2. Enter the control panel in the search box, and then tap or click Control Panel.
  3. Under notice of:, choose large icons and then tap or click programs and features.
  4. Press or click the program and then tap or click on uninstall.
  5. Follow the instructions on the screen.
  6. Restart the system.

  B) Install Dell backup and restore from the link below

  http://www.dellbackupandrecovery.com/en-us/index.html

  Click on the download that is located on the right and follow the instructions on the screen

  Please let me know if it helps.

• Backup Windows 7 error code 0 x 81000037 ' snapshots of files cannot be read. "

  Hello world
  Today, I tried to make my first backup of the computer.
  I tried 4 times now, but still got the same error, something about shots of files that cannot be read.
  Error code = 0 x 81000037
  I really tried many things to solve this problem, because I do not know how to start.
  Any help from someone who knows what to do is certenly welcome.

  Thank you in advance, Michael

  original title: backup Windows 7 error code 0 x 81000037

  Hello

  I have the same problem two days ago. However, I had installed Microsoft Security Essentials (MSE) at the beginning when I bought my computer Dell (dec 2010) (I have not used McAfee). Two days ago, I ran backup on my disk network as usual and got the error message, but I noticed that the MSE has detected a threat to java. I decided to uninstall all downloads in two days ago, and the most important was to run a COMPLETE SCAN of MSE. He caught 3 java threats and withdrawn. After that, I ran backup again and it worked perfectly. I hope that this experience will help someone when I post my response.

  My computer is a desktop i-5, Dell, Windows 7 Ultimate, my network drive is connected to Linksys E3000 of Seagate.

  Note 1: I regularly MSE update later.

  Note 2: I went through the so-called "reparse points" and without success.

  Note 3: Download those that I uninstalled everything came from Apple (please don't hurt me I don't like Apple.) I just wanted to test in all circumstances.)

  Exactly the same problem and same solution: run Full scan in MSE (which found a few 'malware' which is associated javea), then uninstall java worked well!

• Is it possible for first Pro CC hide the automatic backup window

  Is it possible for first Pro CC hide the automatic backup window, without turning off autosave function?

  When such a device is save you wonder why you wouldn't be able to do everything that is the case in the car.

  I'm guessing you want automatic backup in the background?

• I'm trying to reinstall my previous version of Adobe Creative Suite Design Standard. I have the serial number and product number. How can I reinstall without disk? It's a downloaded purchase.

  I'm trying to reinstall my previous version of Adobe Creative Suite Design Standard. I have the serial number and product number. How can I reinstall without disk? It's a downloaded purchase.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both d

  CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both dng and arw.  Ideas.

  Try the following:

  In the Camera Raw window, press Ctrl + K (Cmd + K on a Mac) to bring up the preferences.

  Uncheck the box processor graphics use.

  If that suits him, update your graphics driver may allow you to work with the checked graphics processor.

• Suddenly, Firefox crashes every few minutes - reset/reinstall without help

  Suddenly, Firefox crashes every few minutes.
  Reset/reinstall without help.
  Dozens of incident reports have been sent.
  W7 professional.
  BP-4d77235e-6f1e-4D4E-80ED-568e22150429 29/04/15 09:59
  BP-f654cc0e-4379-4c26-8335-ff7bc2150429 29/04/15 09:00
  BP-4aef9821-6aff-46b6-9827-666c12150429 29/04/15 09:00
  BP-8efe7e6c-1AC5-4746-A769-5eeea2150429 29/04/15 08:42
  BP-e3202185-4BAD-48df-ac4d-d2eb62150428 28/04/15 11:28
  BP-6a5186b3-6d82-44ec-AFED-6461d2150428 28/04/15 10:30
  BP-9cebb099-6e3d-4cc7-8B8F-a35992150428 28/04/15 10:29
  BP-92f82214-7328-4AD1-9DF0-2382d2150427 27/04/15 11:51
  BP-0ce3d4c4-3f1f-4B66-a37f-3d5062150427 27/04/15 11:51
  BP-21e7b59f-7c73-495e-a8fd-9d16c2150427 27/04/15 10:08
  BP-3d12f6d2-b8d9-4098-adc4-1d9132150427 27/04/15 07:17
  BP-f0d19c24-9692-40A4-93BC-8041a2150425 25/04/15 15:19
  BP-757fd125-29aa-4521-B61D-fb25d2150425 25/04/15 14:45
  BP-db6c25c5-6816-4166-ba79-66f352150425 25/04/15 14:18
  BP-4023a864-44FC-492b-a917-04dca2150425 25/04/15 14:18
  BP-cf7b59da-04d5-4624-8754-b17012150425 25/04/15 13:36
  BP-6d74204c-8f5e-4414-b5b5-24c362150425 25/04/15 12:49
  BP-b74e3210-3d94-4003-97b8-84d8f2150424 24/04/15 17:25
  BP-1f49b173-aff9-4abb-A330-d728b2150422 22/04/15 12:21
  BP-36b6c76d-8aa5-4133-aff0-d368f2150415 15/04/15 18:00
  BP-a1e3705f-5553-4695-9405-b8d262150415 15/04/15 18:00
  BP-43837ac8-f0fb-451D-a609-41e652150415 15/04/15 18:00
  BP-27bc79fd-0dbf-4e6e-8692-8b2e52150415 15/04/15 15:00
  BP-374ebabf-EB68-4D9D-a657-572c62150415 15/04/15 15:00
  BP-715092f5-82ac-4BB2-8a78-76dd32150415 15/04/15 13:42
  BP-b6721c11-D542-497a-895F-577c52150415 15/04/15 13:21
  BP-0661d03a-3F13-444e-8f86-af5542150415 15/04/15 13:21
  BP-49adcbfa-CFCA-4641-B125-da04b2150415 15/04/15 12:07
  BP-ea6b55f0-d0f5-4342-ac4c-2e50e2150415 15/04/15 11:20
  BP-e506c488-4eb0-4a9d-A281-427c52150415 15/04/15 11:07
  BP-fe3acf97-71d6-4c25-B640-c35fe2150415 15/04/15 10:52
  BP-32c1257c-65df-4880-a47a-143182150415 15/04/15 10:50
  BP-26cbfc42-387b-4D17-bd3c-16f0a2150415 15/04/15 10:50
  BP-36a70d15-F04E-4258-8598-496852150415 15/04/15 09:58
  I am a web designer and depend on Firebug - this is a nightmare for me.

  Thank you

  Jonathan

  Oops. Apology.

  You have the hotfix again, incidentally?

• I reinstalled iTunes for windows and downloaded two albums purchased on the iTunes store. Both albums have digital booklet in it but it seems that it has not downloaded. In the store, it seems certain. How should I download them?

  I reinstalled iTunes for windows and downloaded two albums purchased on the iTunes store. Both albums have digital booklet in it but it seems that it has not downloaded. In the store, it seems certain. How should I download them?

  Try iTunes Store > Quick links > purchase > music > not on my computer.

  If they do not show here, then visit https://reportaproblem.apple.com/

  TT2