8 - warning - unknown hardware error - Windows to start Explorer.exe System

Similar Questions

• Unknown hardware error code C0000b6d

  I've been browsing the other hardware error codes and have not seen this exact one. My system is a Dell Dimension 8400. This happened directly after a notice flashed on the screen that Avast found a threat, but there wasn't anything I had to do.  Then poof the blue screen of death with the 'unknown hardware error code c0000b6d.

  After that hand, stopping and restarting I get only the Dell screen flash then a high cursor flashing screen left. Cannot get in Mode safe on reboot... just cursed cursor.
  Keyboard strokes are nothing. Help! Katydidtoo

  Hi Katydidtoo,

  1. do you have the Windows XP installation CD?

  Method 1

  It is possible that the hard disk has errors that need to be repaired by using the Windows XP CD.

  If you have the Windows XP CD then I suggest that you run chkdsk on the computer to analyze and repair corrupt errors on the hard drive.

  CHKDSK is available in the Windows Recovery Console and can be a very valuable tool in the treatment of a system that will not start correctly. The use of the Recovery Console is discussed elsewhere, but note that many systems have been rescued by the command chkdsk C: /R Recovery Console there are only two: / p: performs a comprehensive check of the drive and corrects any errors. Does not check if bad sectors / a: locates bad sectors and recovers readable information

  See the Microsoft article below to find out how to start into the recovery console and try the steps above.

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/kb/314058

  Method 2

  If the previous step fails, then check out the Microsoft article and try the steps mentioned below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• d0000144 unknown hardware error

  I have Windows Vista 32 - bit edition on my computer and it does not load in windows normal medium or in safe mode. I tried to do a repair, which was in the F8 menu, but I got a blue screen with the following message at the top left:

  STOP: d0000144 unknown hardware error
  Unknown hard error
  -What this means and how can I solve this problem? There is a wedding coming up and I'm supposed to create programs. This is a nightmare that I can't wake up from. If anyone can help it will be much appreciated.

  It's the hard drive that has failed or failing.

  It's a Dell hard drive error.

  You used the diagnostics from Dell F12?

  Replace the hard drive

  Here's what to do with the Dell Forums of others with this same error code. replace the hard drive...

  http://en.community.Dell.com/support-forums/laptop/f/3518/t/19269780.aspx

  Here are the results of Dell for this research; a failure or hard drive failure.

  http://search.Dell.com/results.aspx?c=us&l=en&s=Gen&cat=CMU&k=error+code+2000-0146&RPP=12&p=1&RF=all&NK=f&IRA=false& ~ SRD = False & ipsys = False & advsrch = False

  See you soon.

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• Gettitng error message "service error: Windows cannot start the BITS service on Local computer" when you start BITS service

  When I try to start the Windows Services BITS service, I get the popup error message "service error: Windows cannot start the BITS service on Local computer.»  Error 2 ther system cannot find the file specified. »

  Where can I find the required file?  It is available from Microsoft to download?

  Thank you

  It could be a missing/incorrect servicesdll value. See if a request would help the BFE (#11) service registry fix in this page:

  Register various fixes for Windows 7/XP/Vista:
  http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/

• SQLite3-wal-point control cannot be in SQlite3.dll library message appears at startup with windows 7 starter 32-bit system.

  SQLite3-wal-point control cannot be in SQlite3.dll library message appears at startup with windows 7 starter 32-bit system.

  Don't worry about this - I fixed it by following the steps below...

  Thanks anyway! :-)

  1. Temporarily close the anti-virus software and firewall
  2. Open the control panel configuration, programs and features or Add (and remove programs) and go to the section uninstalling
  3. Remove all Apple products in this order - iTunes, Quicktime, Apple Software Update, Apple Mobile Device Support, Hello, Apple Application Support.  You don't need to remove Safari
  4. Restart the computer
  5. Go to Apple.com and download the latest version of iTunes
  6. Re-install

• Vista SP2 x 64 install error "0xc0190036 517/97646 (explorer.exe)" _

  I'm trying the upgrade of vista x 64 sp1 to vista sp2 x 64. When the system tries to restart, it crashes with the error "0xc0190036 517/97646 (explorer.exe). I have to hard start and do a restore.
  I tried several suggestions over a period of 3 days. One of the suggestions was to run chkdsk.  This is the error I get when I run chkdsk: "explorer.exe entry index in the index file 35 $I30 are incorrect."  If I run chkdsk /f it says it removes the entry and then explorer.exe is an orphan.  When I reboot and running chkdsk /f even once, I get the same messages.
  Is the vista sp2 x 64 install error and the error from chkdsk associated.  What should I do?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009 (i.e. less than 2 weeks). Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 Ultimate explorer.exe has stopped booting automatically

  Hi, my brother has an Optiplex 720 or 780, don't remember exactly. I just reformat and reinstalled the Windows 7 Ultimate 32 bit about a week ago and installed all Windows updates. Everything seemed fine until yesterday, when he said that he went to for use and he was just a black screen with the mouse cursor. After checking the internet, I discovered that the explorer.exe process is missing from the Task Manager. I am able to start explorer.exe in Task Manager myself, but how to get Windows to do as it should? There are no errors related to the problem at all.

  Here's what I've done:

  System Restore did not fix the it.

  It does the same thing in safe mode.

  Video drivers are to.date according to Windows Update.

  In regedit, explorer.exe is next to the shell

  There was never any antivirus installed on this installation

  Any help would be greatly appreciated, thank you.

  If you had any antivirus installed don't then its probable infection. Clean install Windows 7 after wiping disk preference...

  http://dellwindowsreinstallationguide.com/cleaning-up-a-drive-format-vs-secure-wipe-SSD-and-HDD/

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-7/

  Then use the Windows 7 upgrade license to Windows 10:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows-10/

• "Stop". Unknown hardware error. c000221 'blue screen. At the start of OS disc.

  Initially, my computer was frozen then it wouldn't load windows because windows has been closed down to protect my computer. But wouldn't boot OS disc.

  Then I have a windows c prompt c:\. used some commands, but they did not work. then I changed the master boot system because he said that it was not valid. Now, I get this error message.  "Stop". error hardware unknown c000221. "Please help what we days!

  Hi jytrefe,
   
  the problem may occur if the file described in the error message is corrupted. The following files are checked for integrity to start Microsoft Windows XP:
  • All the driver files (except those that are loaded by the system loader to start the computer)
  • All libraries dynamic link (DLLs), including user, graphical Interface (GDI), Shell, Kernel, Ntdll, Crtdll, etc..

  Follow the suggestion given in the article to resolve the problem:

  "STOP: C0000221 unknown hard error" or an error message "STOP: C0000221 STATUS_IMAGE_CHECKSUM_MISMATCH".

  Additional reference on:

  "Bad Image Checksum" error when you upgrade to Windows XP

• Error: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  Original title:

  Windows 7 no sound at all

  Hello

  I would like to ask help for Win 7 problem 'No audio '.

  I have a Win 7 64-bit Professional desktop PC. It has a motherboard Asus P5Q - EM.
  Previously, everything worked very well over a year, but now there is no sound at all. I see a little red x in addition to the speacer icon.

  I got a craphics card problem and it has been replaced, and shortly after, I didn't notice that no audio problem.

  First of all, I tried to fix the external audio card drivers - no help. Then I thought to use the motherboard
  audio only and removed the external audio card. I have cheked Bios that there is audio compatible motherboard.
  Windows Manager device shows Audio Realtek High Definetion. (Once I reinstalled externally
  audio card, but did not get it to work and I deleted again and focused on getting the Audio motherboard
  work.)

  Through the Device Manager, I uninstalled the device Audio from Realtek motherboard and all other audio related devices and start the PC.
  After you start Windows 7 detects audio devices well and tries to install the drivers but still said the driver installation failed.

  I also used the troubleshooter in Windows 7. According to the material and audio, I clicked on the audio playback troubleshooting. The system has tried to install the drivers, but all have failed in similar way as after rebootig.

  When I go to see the Audio the Realtek High Defenetion properties, it says:
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I downloaded the latest drivers (some 54 Mb file called: 64bit_Vista_Win7_R267) Realtek www-site and run it, but no help. Same problem - no sound at all.

  If I run application system information and go to the "components" > "Problem Devices", it is said Realtek High Definition Audio, error code: failure using the VxD loader. It is also noted on the VAN Miniport (IKEv2), error code: this device does not work properly because Windows cannot load the drivers required for this device.

  I also unplug the beam of the motherboard front audio jack. I thought it may create a connector related issues, but he did not make a difference.

  If I ask the system to update the driver using Device Manager, it says that the piloted is up-to-date.

  I checked the details Realteck Sound Device in the Device Manager and it says under the number "Problem code" 13.

  Also other devices under device 'Video controls and sound game' managers do not work. I uninstalled all the. After reboot Windows 7 detects all the. Win 7 tries to install the drivers, but always fails and yellow! singing appears next to all devices.

  Under the NIC in Device Manager there is another device with the yellow! sign as well. The WAN Miniport (IKE v2). I don't know if it has something to do with this audio problem? Win 7 detects it as well after uninstalling and tries to install drivers after the start, but is also always fails.

  Now, I'm confused and I don't know if the problem is really in the Windows registry database? What is error code 13 of Realtek Audio device and what is actually the VxD loader problem?

  I'm completely lost on how to proceed with this problem.

  Can someone give advice on how to continue with this question...

  Tomppa

  I plugged the the hardware id in the Microsoft Update Catalog and the device is identified as a C-Media CMI8738/C3DX PCI Audio Device but there only Windows 2000/XP drivers available through Windows Update (you need to install the ActiveX control to view and download the drivers):

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=PCI%5CVEN_13F6%26DEV_0111%26SUBSYS_011113F6%26REV_10

  Connect the hardware id PCIDatabase provides a link to C-Media (one-third to the bottom - device ID 0 x 0111):

  http://www.PCIDatabase.com/vendor_details.php?id=376

  However there are a of the drivers mentioned in the following link that can run, and I suggest to try:

  http://www.SevenForums.com/sound-audio/9824-c-media-Freezy-my-PC.html

  The driver is the "Striker 7.1 pilot" (striker81742.zip) in the following link:

  http://www.htomega.com/downloads.html

  An in these drivers .inf file has an id of material corresponding to your device.

  I recommend the creation of a System Restore Point before trying new drivers.

• USB keyboard & mouse error "Windows cannot start this hardware device - code 19.

  Original title - USB keyboard & mice problem

  Hello

  I'm under 64-bit Windows 8.

  Problem: Keyboard Logitech wireless & mouse (S520) does not work.

  1 week ago that I tried my HARD drive on different USB ports on my PC. I disconnected the keyboard and mouse wireless receiver and reconnected. Since then he has stopped working.

  In Device Manager, it has a typical yellow marks against HID keyboard and mouse. I tried to uninstall and reinstall, off and on, makes no difference.

  When I go into the properties by right-clicking, the status is 'Windows cannot start this hardware device Code 19'.

  I tried Googling this error but I found that the solution is only for CD/DVD problems.

  I uninstalled USB Root Hub that is not made any change in the problem.

  Have restarted severl times and power disconnected from the PC and thus reloaded.

  I am currently my PC from iPad using the app Splashtop.

  I really hope that someone can help me.

  I've restored my windows from 16 April that solved the problem. However, I learned a lot about the registry keys and all.

  Thank you for taking the time from your busy schadule and answer my stupid questions.

  Thank you.

• DVD/CD Rom error: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  Original title: CD-ROM/DVD-Rom problems

  My CD-ROM/DVD-Rom drive does not work when I check the system, I get the following message "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). "How to solve this problem?  Thank you in advance.

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Error Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) Cannot read CD/DVD

  Original title: Acer laptop DVD drive missing

  Hello

  I have an Acer Aspire 5740 G computer laptop running Windows 7. When I tried to play a movie today, it did not work. The green light on the drive of CD flashed several times then stopped and all was silent. I opened my computer and saw that the CD/DVD drive wasn't listening it. I then opened by Device Manager and the two things under CD-ROM/DVD-ROM readers had a yellow triangle and an exclamation point on them.
  One thing has been called; SVI 2ZGTAB8HQ7G5 SCSI CdRom Device
  The other thing was called; TSST Corp CDDVDW TS-L633C
  I clicked on both and saw the message; "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »
  The last time I used the CD player a burn a disc over a month. I used Microsoft Fix It but it says to remove the drive and plug it in somewhere else, and I can't really do this because it's the only drive on the laptop and I'm worried I might break if I go out there with force. Can someone help me? I would really appreciate it.

  Hello

  1. what Microsoft FIXIT did you use exactly?

  2 did you a recent software or changes to the material on the computer?

  I suggest you try the steps mentioned below.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I also suggest you run the FIXIT from the link below and.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 3:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  You can run the FIXIT or you can try the manual steps and check.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Method 4:

  Re-install the drivers DVD

  Completely uninstall the DVD drivers from Device Manager, and then install the latest drivers for your computer.

  Open the Device Manager.

  Once the drivers are completely uninstalled, download the latest drivers from the manufacturer of the computer.

  http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=1878

  Hope this helps and keep us posted.

• Error: "Windows cannot start because of a configuration of the disk of the computer problem" in computer Dell Dimension 2400 Windows XP startup problem.

  Original title: problem starting on a Dell Dimension 2400 - how to set up the drive with a keyboard.

  I have a Dell Dimension 2400 with Windows XP, start, he can't go to the home screen, so I can't use the suggestions to start right click.

  The error message indicates "Windows did not start because of a configuration of the disk of the computer problem".
  "Cannot read disc startup selected." check material stand of disk and the path.
  How to set up or fix this problem with a keyboard

  Hi MarieButler64,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.

• C:\Windows\System32\***32.dll errors, from the start of the system and start the program.

  Hey. I received error messages and may not know whats going on. At the start of my laptop (Vista Premium 64, 2.0 ghz Core 2 Duo, 4 GB RAM, 250 GB hd), a series of error messages from reading: "* program title *-bad Image."      C:\Windows\System32\*Dllname here*.dll is not designed to run on Windows or it contains an error. Try to install the program using the origial installation media or contact your system administrator or support software provider. "The name of the cottage change programs and I get messages of 15 or more at the same time. The first so-called 'C:\windows\system32\fwcfg32.dll' error count, the next will say "khdtj9jg32.dll" and the final few say "dispex32.dll". Whenever I hit "ok" in the message, the name of the program window in the changes of the header. I tried to solve my problems (with no success) and do you have a file search for the files in the locations of scpecifed in error messages. I discovered the three files (fwcfg32.dll, khdtj9jg32.dll, dispex32.dll) do not exist in the system32 folder, but they do exist in the "syswow64" folder The system32 folder has files fwcfg.dll, khdtj9jg.dll and dispex.dll in if (note the "32" is not included in the file names). I was on my computer for 7 hours yesterday without problem, and everything I did was organize music files in my documents. I went online to look for something, then shortly after my computer slowed down upwards. He acted as if the RAM was complete (although he was not even 25% used), so I just rebooted my laptop in the hope that a RAM reset would fix it. Then restart I started to receiver messages error and also whenever I start a program. I scanned my system and removed 7 Trojan horses... even if I run Norton and Webroot SpySweeper somehow these got... that's not the point. I have a feeling easily, that played a helping hand to my troubles, and those who are deleted from my computer. Now, I have to recover from the disaster. Any suggestions? Thanks for your time!

  P.S. ~ just like a note aside, I did several searches on the internet, including on the microsoft forums, for the names of 'fwcfg32.dll', 'khdtj9jg32.dll' and 'dispex32.dll'.dll files and got zero results.

  Hello

  It seems that you have an important infection using the below methods of OVERKILL checking that no one can program
  detect or remove malicious software. Only when you are 100% sure you're own doing the cleaning included below.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-my/default.htm?mkt=en-my

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Cleaning ONLY when you are sure that the system is clean:

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.