800b0100 and 80070020 errors in Windows Update

Similar Questions

• When I try to use the Windows updates to and the following error message: Windows update cannot currently check updates, because the service is not running

  have tried to use windows update and get the following error message: Windows update cannot currently check the updates, because the service is not running. You may need to restart you computer. I rebooted several times. Any help would be greatly appreciated as I am not very computer

  Original title: update windows

  Solution 1:

  Try this: http://helpdeskgeek.com/windows-7/cannot-run-windows-update-on-a-windows-7-pc/

  Solution 2:

  You can try to stop and restart the Windows Update Service (wuauserv). Open a command line window (run as administrator) and enter the following lines:

  net stop wuauserv
  regsvr32 %windir%\system32\wups2.dll
  net start wuauserv

  If this does not help, try Microsoft Fix It service to reset your Windows Update components:

  http://support.Microsoft.com/kb/971058/en-us

  I hope this helps.

• error 80070424 Windows update.

  I can't get my Vista updates.   I get Windows update error 80070424.  I contacted my HP support, but they can help.  I hope that there is a SP2 windows install I can just install.  I went to the Microsoft Download Center, but does not install SP2.

  Hi Sean Rodrigues,.

  This problem occurs if a service that is required for Windows Update or Microsoft Update is not registered.

  To resolve this issue, follow the steps described in the methods below in the order listed, starting with method 1.

  Method 1: make sure that the necessary services are available and running

  Make sure that the Bits Service, the Automatic Update Service and the Workstation Service are installed and running. To do this follow the steps below for your operating system.

  To ensure that the necessary services are available and running, follow these steps:

  1. click on Start, type services.msc in the search text box, and then click services.msc in the list programs. If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  2. double-click on Background Intelligent Transfer Service.

  3. If the start State lists Stopped, click Start , and then click OK.

  4. double-click on Windows Update.

  5. If the Startup State lists Stopped, click Start , and then click OK.

  6. double-click on my computer.

  7. If the start State lists Stopped, click Start, and then click OK.

  8. close the Services window and try to install the updates again.

  Note: If the Background Intelligent Transfer Service does not appear in the list of Services, click the following link to view the article on the Microsoft web site and download the update:

  939159 Update for Windows Vista
  Note: If the Service Windows Update does not appear in the list of services, follow the steps listed in method 3

  Method 2: register the Qmgr.dll and qmgrprxy.dll BITS files

  Method 3: download and install the Windows Update Agent

  1. download and install the latest Windows Update agent. Click the link below to view the corresponding article on the Microsoft web site: 949104 How to obtain the latest version of Windows Update Agent to help manage the updates on the computer
  2. once the Windows Update agent is installed, try to install the updates again.

  For more information please visit the link below.
  
  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424
  http://support.Microsoft.com/kb/968002

  
  Windows Update error 80070424
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070424

  Download the stand-alone package of vista SP2 and then install it on your computer
  http://support.Microsoft.com/default.aspx/KB/935791?p=1

  I hope this helps.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Code800F900 'unknown error in windows update' trying to download windows vista service pack 2

  try to download windows vista service pack 2. Last update was on May 21, 2010. For a few weeks or months, the computer can be terribly slow. Often a hard drive rattle sound. For this, I tried anti-spyware, last week I installed and ran AdAware from lavasoft. It found nothing except two small cookies. A few weeks earlier, I had done the same thing using windows Defender. Also nothing. Along with a check disk hard I did not find much either. What end of the lifecycle for this computer, now about 3 years? He was one of the first available vista computers. Thank you for your help, Peter

  * Original title * Code800F900 'unknown error in windows update', try to download windows vista service pack 2__I have an oem version purchased with HP model s7720.nl

  Why did you delete your post where you said that Norton application has been installed at some point in the past?

  There is nothing wrong with the guarantee of these forums, but I'd be willing to bet that there is something VERY wrong with the security of your computer!

  Let's cut to the Chase. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install Windows update, the error message "" Windows update canoe currently check for updates, because the service is not running ".

  Initial version of updated title: windows

  My "Windows update" is not updated. The problem started recently and its shows the error message "Windows update canoe currently check for updates, because the service is not running. You may have to restart your computer "." I tried it with several reboots, but there still is not up to date. Kindly help.

  Hello

  Have you made changes on the computer before this problem?

  Method 1:

   

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Try the procedure described in the following article and check the status of the issue.

  http://support.Microsoft.com/kb/822798

  Restart the computer and check it please for windows update.

  Hope the above information is helpful.

• driver chipset download code 80070490 error using Windows updates

  original title: try to download intelr 829456 chipset family code 80070490 error, microsoft has tried to adapt it still download of may not run solutions

  Hi, I keep getting a notice from windows update down load an update of the family of chipsets intel r 829456 Express.com when I do I get a code error 80070490, used good microsoft it solutions I get a message from windows update components must be repaired don't know what to do next , or if I need this update?, or is there a way to stop this request to make this update? Dave

  Hello

  Did you change your computer?

  I suggest you to see link and check.

  Windows Update error 80070490

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Whenever I log in I get an error message "Windows Update has stopped working".

  original title: everytime I log in I get an error message "Windows Update has stopped working".  I tried a manual update as well and it does not work.

  In details, the error message is:

  Signature of the problem:

  Problem event name: BEX

  Application name: wuauclt.exe

  Application version: 7.4.7600.226

  Application timestamp: 4a7b870b

  Fault Module name: StackHash_6bc7

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 00404968

  Exception code: c0000005

  Exception data: 00000008

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 2057

  Additional information 1: 6bc7

  More information 2: f3f6a1403802118ada460cd45530935b

  Information additional 3:6477

  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  HiTunnywig,

   

  (1) since when are you facing this problem?

  (2) are - what you remember for change?

   

  Wuauclt.exe rest reside in the background and checks the Microsoft Web site for updates to the operating system. Originally, wuauclt.exe is a legitimate system process, which is located in C:\Windows\System32, but there are cases where wuauclt.exe is actually a disguised virus, Trojan or worm.

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

   

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:  Run the fixit available in the article below to reset the Windows Update components

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

  I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

  Hello

  I apologize for the delay in responding.

  This error means that a file (CBS Manifest) that is needed to install updates is corrupt. I suggest to try the procedure described in the following Microsoft Support article and check if it helps. This article consists of the steps to troubleshoot and correct this error.

  https://support.Microsoft.com/en-us/KB/958044

  For more information, you can consult the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80070490#1TC=Windows-7

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• Impossible to install World of Warcraft and the error message "Windows cannot access the specified device, path or file. May not permissions to access you the item.

  Original title: Need help ASAP please

  Hi all

  I am currently running windows 7 and recently I met a problem that has been giving me the error code: 0 x 80070043 and the Error Message: Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item'. When you try to run a Setup.exe for world of warcraft. But the thing is I am the administrator of the computer and have not had this problem in the neck, it is their all settings or something I can do to fix this? any help would be greatly appreicated thanks and God Bless.

  Hello Jay,
  Thanks for posting your question in the Microsoft Community forum.
  The description of the problem, I see that you are unable to install World of Warcraft and error message "Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item".»

  This problem may occur if you do not have permissions for the file or the location of the file, if the file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer or your antivirus software may block the file.

  Don't worry; Let's try a few steps that will help you solve the problem.

  Method 1:
  I suggest you run the fix it and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244
  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• I am running XP it and suddenly had 4 Windows updates fail to install it on 3 separate occasions.

  I am running XP it and suddenly had 4 Windows updates fail to install it on 3 separate occasions. Failed updates are as follows: "Security update for MS Core abuse 4 SP3 (kb2721691)" "Security Update for MS NetFrame Work 3.0 SP2 on Windows Sever 2003 & Win XP x 86 (kb2656407)" "as last but Frame Work 2.0 SP2 & (kb2604092) ' and finally 'as last but (2604110 kb)" How can I get these updates installed? "

  Hello

  Thank you for your response.

  Safe mode is different from boot were the clean boot will help disable you any of third-party applications or starting points which is the source of the problem.

  Also I suggest you to see link below and check if it helps.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798/

  Hope this information is useful.

• I get the error code 80070020 when installing windows updates and also my computer crashes a lot. How to fix?

  I'm unable to install all the updates of windows - getting error code 80070020.  Have tried the suggested steps and they didn't work.
  Also can't get with my computer freeze.

  Did you just listed:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates
  http://support.Microsoft.com/kb/883825

• Error encountered and unknown code B56 Windows update

  B56 Windows update error encountered and unknown code.

  * Title *.
  B56 Windows update error encountered and unknown code. I can't install 10 updates because of this ERROR! Someone at - it a difficulty for me or answer? I tried to install these updates for a few weeks now.

  pjrjt,
  You can watch the answer in this thread.  It covers the issue you see.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Errors 8024402C, 643 and 646 when installing Windows updates

  Original title: 22 code 8024402C, 646, 643 update failure
  Just cancelled anti-wear Virus, now uning microsoft and find several updates not installed.

  I just need to know if updates from ore relevant or not.

  Hello

  Updates are highly recommended. Updates can help to prevent or fix problems, enhance the operation of your computer, or improve your computer
  experience.

  Update error 8024402C may occur for various reasons.

  Step 1:

  Check this link for troubleshooting steps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8024402C

  Step 2:

  To fix the error 646, you can run the diagnostic article Fixit tool:
  http://support.Microsoft.com/kb/2258121

  Step 3:

  Run Fixit of this article to correct the error 643:
  
  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958052

  After you complete the steps, check if you can install the updates.

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Cannot install 3 updates 10/18/09. UPDATE OF SECURITY FOR MICROSOFT OFFICE VISIO 2007 VIEWER. AND 2 updates to SECURITY FOR MICROSOFT OFFICE SYSTEM 2007, I get error message "windows update: 00000646 windows update: dt000. Help, please!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Try this 1st to see if it helps:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary:

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it. Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the preparation tool update for Windows Vista for Windows Server 2008 and Windows 7 system
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the groups of the Agency who could
  have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Errors in Windows Update and Windows Defender trying to update

  Hello

  IM new to this site and I have some problems with my laptop. Its a Compaq Presario V6000 with Vista Home Premium.

  When I try to update Windows or defender, I get an error on each code, so I can not update all error codes are

  Windows Update - 80004002

  Windows Defender - 0 x 80004002

  I rang Microsoft and was on the phone with a tech for almost an hour.

  I was told to try these and

  http://support.Microsoft.com/default.aspx/KB/956708

  http://support.Microsoft.com/kb/935791

  and a few others which I can't find. Also tried booting the computer with extras connect the laptop on the modem rather then to have as wireless.

  Nobody knows how to solve this problem. Any help would be appreciated it has been like that for a couple of months nows.

  Try Mr Fixit-
  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  If not, see:
  How to troubleshoot Windows Defender definition update
  http://support.Microsoft.com/kb/918355
  TaurArian [MVP] 2005-2010 - Update Services