8127: cannot create plan PAIR of ACTIVE STANDBY because another replication

Similar Questions

• Eve activates for the pair of active standby

  Hi all
  The standby database will take over of duty of the current database when the database fails?
  If this is not only a read-only database on hold and how high-availability works pair active support?
  
  
  Thank you

  As I mentioned earlier, there are two aspects to this. failover of the database and the client failover. The database failover is initiated by calling the internal commands that I described earlier. Something outside of TimesTen should do when it detects a failure and decides to failover. You can write. / script your own framework to do this (very complex and difficult to get right) or use Oracle Clusterware (one free of the fresh product but can be a little complex to install and need some resources). Client failover is based on failover of the database; the database failover occurs when all clients configured for client failover are failed over at that time. You cannot failover of client without the failover of the database happening. Note that this client failover works for true client/server connections. It cannot be used for connections in live mode.

  Chris

• Cannot create the Pool - host active directory unavailable

  Team

  When I create a linked clone Desktop Pool im get the host Active directory unavailable error... when I run dcdiag from the Viewconnection server all returns fine / successful... I ping the domain name itself and the controller DC very well from the network... Any idea where I can look to see what the issue is here?

  Thanks in advance

  Shaun

  You should do all of these tests from the vCenter server, here View Composer is running and that's what joined the VM:s in the field.

  Linjo

• Is this declaration for the creation of correct active standby pair?

  Hi, I have two servers, one is "baal" and the other is "diablo".
  I want to create a pair of active standby with the RETURN of TWOSAFE and disable the BACK after that 5 times timeout happens and resume BACK if less than 8 ms recognize.
  I do not sure if 8 ms is reasonable if the starting node is far behind the active node (assuming the starting node is to hardware failure).
  Here's my response:
  --------------------------------
  PAIR of EVE ACTIVE CREATE eppdb WE "baal", eppdb ON "diablo."
  RETURN TWOSAFE
  STORE eppdb WE 'baal '.
  DISABLE THE BACK EVERY 5
  CURRICULUM VITAE OF RETURN 8;
  -------------------------------
  Is what I'm not clear on the key word "STORE."
  I noticed that there are a lot of 'STORE' after RETURN of TWOSAFE and make that confused me for a while.
  If this assertion is false, please correct me.
  
  Thank you.

  In fact, these options apply to the store level so that the statement is as follows:

  CREATE A PAIR OF ACTIVE STANDBY
  eppdb WE 'baal', eppdb ON TWOSAFE of RETURN "diablo."
  STORE eppdb WE 'baal '.
  DISABLE THE RETURN ALL 5 HP BACK 20
  RETURN SERVICES TURNED OFF WHEN THEY ARE ARRESTED
  SUSTAINABLE COMMITMENT ON
  COMMIT LOCAL ACTION VALIDATION
  WAIT BACK 30 TIMES
  STORE eppdb ON "diablo."
  DISABLE THE RETURN ALL 5 HP BACK 20
  RETURN SERVICES TURNED OFF WHEN THEY ARE ARRESTED
  SUSTAINABLE COMMITMENT ON
  COMMIT LOCAL ACTION VALIDATION
  WAIT BACK 30 TIMES;

  All these options and what they mean are described in detail in the (very good) documentation. I would recommend that you read in order to understand that you configure here... Just a summary.

  Whenever the wait isn't available, application commits will experience timeouts (TT WARNING 8170). Request code must be prepared to receive and respond to this warning. Finally (according to the options DISABLE RETURN and RETURN WAIT [see below]) TT come back asynchronously and wait times stops. Once sleep is available and the stores are back in sync TT will increase from TWOSAFE BACK mode once again.

  DISABLE BACK every 5 - turn off the twosafe return (i.e. emergency in asynchronous mode) treatment after 5 consecutive times (each timeout will be 30 seconds)

  BACK to the TIME of WAITING 30 - wait up to 30 seconds (a very long time) for recognition in return for service to the peer

  The combination of these two parameters means that in the event of network failure or the eve past active offline will be waiting for about 150 seconds (5 x 3) before disabling the twosafe return processing. During this time of transaction request will be and experience timeouts. I would suggest smaller values such as 2 and 10 maybe but only t = OU can decide what is reasonable for your environment.

  SUSTAINABLE if ENGAGING ON - whenever the return services are then disabled, force all commits to be sustainable (synchronous disk). This will degrade performance, but provides continuous data protection when the instance of relief is not available. If you don't want this feature so do not configure (but then when the watch is not available you are exposed to data loss if the assets fails).

  RETURN SERVICES OFF when THEY are ARRESTED - disable services return (spend in asynchronous mode) each time the replication agent stops.

  LOCAL validation ACTION COMMIT - if a validation Gets a time-out warning (TT8170) then the transaction status is uncertain. The application can choose to engage locally (allowing it to continue the treatment), in which case the txn is committed. will be added to the queue of replication for a (possible) retransmission in asynchronous mode. It is the recommended behavior and is defined by this option. The other option is NO ACTION, which is also the default value. With this option, the application must implement the logic for its own decision, and then call a few specific TT builtin functions to decide how to deal with the uncertain state. This adds significant complexity. Until the application makes a decision, it is impossible to continue.

  See the documentation for more information.

• Safe way to restart the pair active / standby

  Hello

  I need to reboot my ASA5520. We have a pair of active / standby and I want to make sure they come in playing well and not in a fierce struggle.

  Any advice on how to reload these machines and optimize operating times?

  Thank you

  Pedro

  Pedro

  If you are not bothered in regards to he who becomes primary then simply pick one, reboot, wait until it has developed and then reload it.

  As long as you have properly configured failover, there should be minimal downtime, just the time it takes to switch when you reload.

  If you want to stay as the main primary school, then you need to recharge it first, let it come as standby, then reload the other and the former primary school will now become primary.

  Note that recharge the standby is firstly the best approach simply because you then have only a failover IE. When Eve comes backup and resumes, it's a standby feature then you recharge the primary here will be a failover.

  Jon

• Incorrect web server is listed and cannot create EPMA planning App

  I tried to create a first application of EPMA planning but unable to continue because it lists the incorrect web server.
  
  Little history on the environment: environment WinTel 2008, 11.1.2 Suite.
  
  FS, Essbase, workspace on the box 1
  Planning on box of 2
  HFM on box of 3
  FDM on box of 4
  RA, EN on box of 5
  Oracle Enterprise on box of 6
  
  Intended has been installed on the box 5 and box 2. Currently web server list box 5 instead of update box (2).
  
  Y at - it all the settings that I can change to the right list server?
  
  Thanks in advance!

  You reconfigure "configure logical address for Web Applications" and update the host to the new host?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Vista cannot create a network map

  the two 2 computers running Windows Vista Edition Home Premium.  Network and sharing screens put in place identical.  On my computer (from the network and sharing Center), I can click on view full map and it shows my network card.  On the computer of my wife (of the network and sharing Center) she can click on view full map and it rises "Windows cannot create a network adapter for the selected type of connection networl.  I might add that both computers are 'wired' internet/router.

  Any help?

  Hi Duane_TN,

  Are your computer and your computer wife have chipset or card network NVIDIA perchance? or a Linksys router by chance?  This is a post in the forum of Linksys, you might want to check in to see if it applies to your computers:

  Symptom: Windows Vista computers are not put on the Vista network map. Or well, you get the following message when you try to view the full network map: "Windows cannot create a network adapter for the type of connection chosen network." To check go to: PANEL-> CENTER NETWORK AND SHARING. SEE the FULL map (top-right) and find either: A Windows Vista-based computer is listed down under: "the following peripheral discovered may not be placed in the plan. or You get the message, "Windows cannot create a network adapter for the type of network connection. Possible cause: The offending computer has an NVIDIA nForce Networking Controller whose property "priority and VLAN" to "priority"active & VLAN. Solution: Set the property 'priority & VLAN"to"Priority and VLAN Disabled"as follows: Reach: START-> CONTROL PANEL-> ADMINISTRATION-> COMPUTER MANAGEMENT TOOLS In the resultant "computer management" window select: DEVICE MANAGER (left side). "NICs" (right). Expand "Network adapters" and see if it lists a NVIDIA nForce Networking Controller. Right click on 'NVIDIA nForce Networking Controller' and select 'properties '. In the resultant 'NVIDIA nForce Networking Controller Properties' window, select: "Advanced"(tab) ". Under the list of the 'properties', select 'priority & VLAN. for 'Value' assign ' priority and VLAN disabled. References: ---------- How to get the Vista network map works on nVidia MB http://www.TechIMO.com/Forum/networking-Internet/197756-how-get-Vista-network-map-working-NVIDIA-MB.html Other things to check: Update to the latest version of the driver (65.7.4.0 works for me). Article referenced above indicates a previous driver may be bad.

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• iPhoto cannot create folder

  Older version of iPhoto to create folders of photo with my uploaded photos. Now, after upgrading I can't do, I copy a picture want to paste in the folder but unfortunately paste is not active and the image can be placed in the folder. What to do, I've uploaded lots of photos from my camera to my Mac Book Air, but cannot create folders and separate them in the order that I used with the old version of iPhoto.Please help me! Cannot work! I upgraded my laptop to fall last year and I am very unhappy because of that.

  Marta

  You use iPhoto or Photos?  The iPhoto version which will work with El Capitan is 9.6.1.  We need more info about your situation before we can begin to help:

  1 - What are you using, iPhoto or Photos?  What version?

  2. What are your help?

  3. where are these records to which you refer? In the library or on the desktop?

  If you have any Photos, this could be useful:

  Moments in Photos are new events, i.e. groups of photos sorted by date of catch.

  When the iPhoto library has been migrated first to the pictures there is a folder created in the box titled iPhoto events and all migrated iPhoto events (which are now Moments) are represented by an album in this folder. Use the Command + Option + S key combination to open the sidebar if it is not already open.

  NOTE: it has been reported by several users that if the albums of the event are moved in the iPhoto Library folder in the sidebar, they disappear.  It is not widespread, but several users have reported this problem.  Therefore, if you want to if ensure that you keep these event albums do not transfer out of the iPhoto events folder.

  Is there a way to simulate events in pictures.

  When new photos are imported in the library of Photos, go to the smart album last import , select all the photos and use the file menu option ➙ New Album or use the key combination command + N.  Call it what you want.  It appears just above the folder to iPhoto events where you can drag it into the events in iPhoto folder

  When you click on the folder to iPhoto events, you will get a window simulated of iPhoto events.

  Albums and smart albums can be sorted by title, by Date, with the oldest first and by Date with the most recent first.

  

• Can I create a profile user account on one separate hard disk other than 'C' or can I move an active profile to another hard drive?

  Can I create a profile user account on one separate hard disk other than 'C' or can I move an active profile to another hard drive?

  No, you cannot create profile on something other than the system drive. You cannot move the entire profile, but you can move directories in sketch.

  http://www.edbott.com/weblog/?p=1371

  MS - MVP - Elephant Boy computers - don't panic!

• Is it necessary to buy two packs of licenses to set up a cluster active / standby HA with two units of TZ300?

  I need a cluster active / standby and I think I will need to buy two devices and only CGSS. Am I wrong?
  Why there is no TZ300 HA Unit regarding the unity of TZ500 HA and TZ600 HA unit?

  Thank you

  Angelo

  Yes, you are going to have to buy two devices and licenses only to your main unit. The only reason why there are TZ500 and 600 HA units because generally these are units that especially customer implement an HA pair because of the power they have.

  A TZ300 and 400 are wanted over a smaller model of business that usually gives rise to not have an HA pair so their isn't a specific unit of HA.

  These HA units are not different from any other unit, they are simply locked as part of a wise pair HA license.

  Thank you
  Ben Davis
  Reference Dell SonicWALL
  #Iwork4Dell

• Cisco ASA CX active / standby

  Hello friends

  One of my clients has a couple of ASA 5545 work quite well as active / standby failover. But the configuration that is not copied to the secondary unit is CX. Do you know how to get it? Please, do not hesitate to request further information, comment or document will be appreciated.

  Kind regards!

  The CX configurations are not part of the active reserve ASA replication.

  How to synchronize the configurations of CX is to use PRSM (first Security Manager - product under separate license, not the one provided with the CX) running on a virtual machine in device mode.

  Reference.

  Once you find out what pair CX with a PRSM "out of area", all configuration changes are deployed both to the pair.

• Design of switching between Nexus7K and active / standby firewall

  In the attached diagram, Nexus7K is used in two ways: on the left side, pair NX7K connects to the firewall as layer 2 trunks. vPC VLAN are shared through resources. The firewall is a pair in Active mode / standby. On the right side, another pair of NX7K connects to the firewall as layer 3 rotued links. HSRP or VRRP is running between the pair of NX7K for firewall VLAN SVI.

  Because even NX7K have mesh connections to the active firewall units / standby, I want to make sure in failover scenarios (failover firewalls or failures of NX7K), the link that remains between the pair of NX7K and the firewall can actually send traffic (not perforated black).

  Failure scenarios I can think of include: Firewall active failover on the eve, failure of the main device NX7K, double NX7K active and failure of peers-link NX7K vPC. I would like to get some advice on what I should consider and implement in these scenarios to achieve high availability.

  Many thanks for any advice.

  Hello

  your topology, I see that the main problem is that the physical connectivity from the firewall to the pair of devices nexus in topologies to fails to a redundant link to the N7K

  first since you're using vPC with one counterpart vPC linking the pair of N7K then you must follow the recommendations of Cisco firewalls of L2 and L3 link connection

  L2 if you pass vPC vlan on the trunk in your topology and firewall then there is a possibility of blocking traffic or drop cases underwritten by vPC loop prevention mechanism in the case for example a vPC counterpart link gose down

  the fix to the East either:

  use no-vPC VLAN and link to switch separate inter for VLANs (i thin that you already have this link)

  or multi home L2 connects each firewall for the two switch N7K and assuming that HSRP is configured in the N7K and static routing is used between the firewall and the N7K

  for links to L3 Firewalls:

  You must stream as well (if possible and recommend) and use a static routing between N7K and firewalls and firewalls must point to the VIP of HSRP N7K

  multiple L3 and L3 dyanaminc routing peering on the link of the vPC-peer is not supported design

  Look at the discussion that might help as well

  https://supportforums.Cisco.com/message/3792466#3792466

  hope this helps

  If useful rates

• I can't join or create a group of houses in windows 7 it says my pc and laptop cannot create a how I should I followerd all articles I can find on the microsoft kills site

  I can't join or create a group of houses in windows 7 it says my pc and laptop cannot create a how I should I followerd all articles I can find on the microsoft kills site

  Hey borq Queen,.

  Welcome back you hear. If, after completing all the steps below, you are still unable to create or join a homegroup, I think that the issue is to do with IP/V6.

  Check your setting of the adapter for IP/V6. Your network connection must have IPv6 enabled to create or join a homegroup. If it is disabled, follow the steps below to activate it.

  (1) right click on the network icon and select open network and sharing Center.

  (2) in the window that appears, select change the parameters of the map.

  (3) in the network connections window, select the connection to the Local network for the Integrated NIC, and then change the settings for this connection or the file > properties.

  (4) in the connection properties page, check the box for Internet Protocol Version 6 (TCP/IPv6).

  Close all windows and restart your system.

  Try to create a homegroup.

  You should be able to create or join one after the activation of the IP/V6.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• Active / standby ASR9000v ICL

  Hello world

  After reviewing the documentation for the 9000v, I wonder if it is possible to configure the following scenario without using nV Edge. I have a pair of ASR9912 that are configured as standalone units. We received 3 ASR9000v which we configured in a scenario of the active / standby as part of a requirement of the customer.

  There is a pattern in this link: https://supportforums.cisco.com/document/9868421/asr9000xr-using-satelli... that shows the scenario, but it seems like a VSS deployment. In the same document, section 13 describes a Dual-host configuration. I wonder if that's what I'm looking for. Interfaces GigE on the system of 'sleep' will be in a break state? I'd be worried about some conflicts.

  I'm not the second 9912 upward and going until mid-January because of the power and the grid space, so I can't test until then.

  Has anyone successfully deployed this scenario without using nV Edge?

  Thank you.

  -Dominique

  DOM,

  We prefer that you evaluate advanced bifocals, which is a new feature. You will not need to use NV EDGE and we are actually calling customers of this technology to something more standards based. Take a look at the following:

  http://www.Cisco.com/c/en/us/TD/docs/routers/asr9000/software/asr9k_r5-3...

  Concerning

  Eddie.

• ASA 5520 Active standby and ssl vpn loadbalancing

  I have a pair of Asa 5520 failover active rescue running. Can I use these two machines in a cluster of ssl vpn load balancing?

  N ° when a couple active / standby is part of a cluster of VPN, the rescue unit is still pending - she will not be actively terminate user sessions. Only the active cluster members (and non-failover) will do.