Vista cannot create a network map

Similar Questions

• Windows cannot create the network map. Responses of the other devices on the network are delayed or on the network, there is a router incapatible

  Original title: no network card
  I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.

  I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.

• Message error "Windows cannot create the network map.

  I double click on my router for initiating the process of network card and I get the message...
  
  I did all the recommended solutions and everything is in order. Can not know why it is not mapped my network.

  Hello

  I only see the answer here-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-functions-normally-but-Windows-cannot/849bdfc6-5c74-E011-8dfc-68b599b31bf5

  Thank you.

• Windows Vista cannot find any networks after reformat

  Windows Vista cannot find any networks after reformatting. Help!

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista cannot identify the network

  Hello, I have a similar problem like this post
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/500f6465-83ab-405a-9ed2-23f8bf1a9236 while Vista connects to a network, but may not identify the network and therefore cannot access the internet for any purpose. I saw the same problem on 4 different laptops in the last 2 weeks. All that relied on a wireless connection, but now will not connect either wired or wireless.
  I tried the Patch flag Broadcast and anything else that I could find through Google.
  As has happened on several machines at the same time, I can only assume that it's down to a Windows Update. I tried to install SP2 to Vista and later updates, but in vain. Interestingly, my wife, computer Dell laptop running Vista Business, and so far it still works fine.
  If you could be of any help to me I would be very well kept, my next step could very well be the reinstallation of the OS.
  Thank you very much.

  Hello

  Alas, it seems to be still no solution for this problem. I am a small scale system integrator and repair service in my spare time, and now I just took my system 10th with this anomaly. So far, my only response is to re - install Vista, which worked perfectly on previous systems 9.
  Any other ideas?

  Crebomonster

• Cannot create wireless network

  I'm having a problem making the myRIO create its own wireless network. It has the ability to do so, as shown in the tutorial of myRIO OR video to http://www.ni.com/academic/students/learn-rio/applications/ in the dashboard of data and OR video myRIO @ 57 seconds. In the video, it clearly shows the ability to create wireless network, however, when I followed the instructions in the video, I don't have the option listed to create the wireless network. The attached picture shows my screen and lack clear option.

  I'm new to myRIO and so still learning, but I have no idea why I did not have this option. Any help would be greatly appreciated.

  Thank you

  Juan

  You must upgrade to the latest driver.

• Cannot create the network location in my computer

  I can't create a network location in my computer. I open my computer and right click on an open area and enter the ftp://ftp.irvinerunningclub.co.uk location but get the error message "the folder you entered does not appear to be valid" I have another computer with the same version of windows 7 (home premium) that allows me to create this place without problem. Are there opportunities for a fix or a link to an update that corrects this problem?

  Hi Finlay,

  I understand that when you try to create a network location, you get an error.

  The error message you get usually occurs when Windows try to check the subfolders of the parent and parent. If the parent folder is not configured for WebDAV, the connection attempt fails.

  Please see the article below for more information:

  http://support.Microsoft.com/en-us/KB/2560598

  We can also refer to the link below and check if the steps you followed to create location are correct.

  Refer to the answer provided by Anoop P K replied the July 10, 2012.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/FTP-server-error-the-folder-you-entered-does-not/2d919979-Badd-4134-909e-645028fe56b8

  I hope this helps. Please let us know if you have any additional questions.

• Vista cannot create a ad - hoc connection if not connected to a router

  Summary

  I am trying to create an ad - hoc between my iPhone and my VISTA laptop connection. It works as long as my laptop is connected to the router. If I disconnect I can not create the ad hoc network more (error message "Windows cannot setup ").

  What I'm trying to accomplish

  Get a wireless connection between my iphone and my VISTA laptop without a router or wireless access point. Basically, I use my iPhone as a webcam, connected to the laptop, where an application processes the data stream. I do it in different places, without internet access.

  Detailed problem description

  VISTA not connected to a network

  1. open the network and sharing Center

  2. click on "set up a connection or network.

  3. click on "Configuration of the wireless ad-hoc (computer to computer).

  4. click on "next".

  5 network name 'ad - hoc test 1', type of security: no authentication (Open), click "next".

  6. Windows returns : "Windows could not set up ad-hoc test 1.

  If I repeat the same procedure with my laptop connected to the router (wired or wireless)... It works without any problem.

  Any ideas what could be the problem and how to solve!

  A big thank you and a happy new year 2011

  Emanuel

  Hello

  The iPhone needs to be configured for Ad - Hoc with a different IP address like 192,168.1.6

  Perhaps this page can provide better instructions on a different route.

  http://alaashaker.WordPress.com/2009/03/27/connecting-your-iPhone-to-your-laptop-using-a-wireless-ad-hoc-network-iPhone/

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Cannot create an image map [was: where are the panels?]

  Where is the sign that used to be left? I want to make a link of the rectangular map area (image map) after a few hours, I had the 'map' appears in the properties (for those wondering I had to be in design mode in the upper left and upper right dropdowns select design and image). The next step is to choose the tool circular or rectangular to select an area, but where is this toolbar now? How do you get it to appear?

  Edited by moderator subject line.

  You can create interactive images only when the Document window's Design view. It must also have an image selected at the time.

  Image maps cannot be created in Live view mode.

• Windows Vista cannot find any networks - please help!

  On my laptop Windows Vista comes preinstalled and can have no problem finding networks.

  I also have Ubuntu on my laptop and it is detects networks easily.

  I was told it might be the driver... However, I don't know where to find the latest drivers for Vista.

  Nobody knows exactly where to find them? I am eager to find a simple solution if it is not the drivers.

  I appreciate any help you can give me. There is no sense to me why he does not find networks, including in my house. Thank you!

  Hello

  1. How do you know that the problem is related to the drivers?

  2. you remember to make changes before the hardware or software issue?

  3. What is the brand and model of your system?

  Method 1:

  You can read the following article and try to run the troubleshooter.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  We can also refer to the computer or the device manufacturer's Web site and try to install the latest version of the drivers.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

• Vista cannot add a network printer, but can't XP...

  I have a printer is installed on a computer running XP that i wan't to print form other computers... I can install it in the other XP machines and print without any problem whatsoever.

  But when I try to install it in my Vista machine I get an access denied error...

  I tried different machines, formatting, etc...

  It will not just install the crazy printer...

  Any solution?

  If the drivers are available, correct, kindly repost your question in the Vista Networking Forum. link already provided in two (2) responded earlier.

  Mick Murphy - Microsoft partner

• Vista: Cannot see wireless networks - I know they are there.

  I'm contracting at Microsoft and just installed the company issued IT Vista. Everything works fine: I joined the appropriate domain and can access all internal servers and the Internet with the ethernet cable is plugged.

  However, I don't know how to jump on the wireless network. My host OSX (10.5.6), I see the Microsoft WLAN airport is accelerating. Connection to the WLAN MS requires that I am connected to the correct field in Vista (I am), but I do not see the wireless networks - as if there is no such thing as a wireless NETWORK card.

  VMWare Tools are installed, and Device Manager shows my NIC is "Intel Pro/1000 MT Network Connection. I use the connection of NAT in Fusion. Diagnosis of the problem in Vista, he said: it is not an installed wireless device.

  Connection to the WLAN MS requires that I am connected to the correct field in Vista (I am), but I do not see the wireless networks - as if there is no such thing as a wireless NETWORK card.

  It does not exist. Take a look at: VMware Fusion (menu bar) > help > VMware Fusion help > Machine virtual Basics > virtual hardware specifications

  If you need to post by connecting to WiFi since in Vista then you will need to install a 3rd party USB WiFi NETWORK adapter in the Virtual Machine in Vista.

• Vista cannot open the network and sharing Center. Cannot open the computer properties. After trying to configure network options

  cannot access system restore and many other things

  Looks like I'm not the administrator more

  Hello david_).

  Thanks for the return of the response.  How antivirus software you use and what was the last full scan you completed on your system?  Did you run any software removal of malicious software on your system?

  Please visit the link below and follow the advice of THE C...  Please let us know status once it's over.

  Microsoft Answers: Malware

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/malware-called-antivirus-Pro-has-taken-over-my/3cb4a36a-6134-448C-A134-151d03fbd968

• Operating system windows vista, cannot create contact groups after the export contacts from another computer, how can I solve the problem

  I had surgery with vista and Windows mail and setting up the contact email groups, however I had someone export my 'contacts' to another computer that has worked on xp, since which time it is so more ease to set up groups.

  I tried for hours as a software specialist and can't seem to solve the problem

  Thanks for any help - Pleease

  David Rumsey

  Missing the Windows Contacts toolbar buttons
  http://www.vista4beginners.com/missing-buttons-from-Windows-contacts-toolbar

  Vista - "New Contact" and "Contact Group on new" button missing
  http://www.Vistax64.com/tutorials/186477-new-contact-new-contact-group-button-missing.html

• Windows Vista cannot identify the network wireless secure after reboot, shutdown, standby, idle, screensaver...

  I have a Dell Inspiron 9400 that is about 5 years old.  After almost every stop, restart, sleep, saving screen and idle my wireless connection icon gets a yellow warning triangle and when I open my network and Center sharing there is a red X on the 'plan' and he said: he can't identify the wireless network.  So I have to disconnect and reconnect several times to connect wireless.  There are also 2 PCs cable, 1 PC wireless and 1 laptop Mac wireless connected to the NetGear RangeMax router with no problems.  I tried to update my Broadcom 802.11 g network adapter (version 4.82.28.56 / date 21/06/06), but he says it's the most recent driver.  I use WPA2-PSK authentication with a password for the security of the wireless router.  The only one I know about computers is that when I have a problem I look up on internet forums until I have the solution, and then I followed the instructions.  It has worked so far.  If anyone can help me I would really appreciate it.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  Do this if Windows native drivers claim already updated.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.