8610: create the menu scan shortcut on the desktop

Similar Questions

• Right-click on the program icon to create the desktop shortcut - nothing happens?

  I right click on any program icon to create a shortcut on the desktop and nothing happens. It is as if he has forgotten what to do when you right-click. How can I fix it

  Hi Yoliray,

  • Since when are you facing this problem?
  • You did changes to the computer before this problem started?

  However, you can start the computer in safe mode and check if you can create a shortcut on the desktop in safe mode and after return the result. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  If you can not create a shortcut in your user account, you can start again in safe mode and try to access the built in Administrator account and try to create a shortcut in the administrator account and check if it creates and post back the result.

  You can also try to re - register the i the shell32.dll file and check if it helps to create the shortcut. To re-record the file, follow the steps below:

  a. Click Start and click Run.
  b. in the run box, type the command regsvr32 /i shell32.dll and click Ok.

  Restart the computer and check if that helps.

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• create the desktop of a website icon preferred how.

  How to do

  How to do

  On my desk, I have a line input method shortcut I found on the web.
  I just right click inside the page > create a shortcut > he would ask if I wanted to have a shortcut on the desktop > I clicked on Yes.

  Than anything I've done.

  t-4-2

• Create the desktop shortcut in windows 8 for "windows update".

  I want to check my windows to update often, but I can't make a shortcut to access.  I know how to do, but it is not okay. I go to it and I right click to pin to one of the two places the task bar or the menu 'Start' which I do not know if this is more, but that is besides the point. For other things I can create a shortcut, and I'm sure I used to have one before I had to re install the computer. When I right click on it nothing appears at all.

  Do this way:

  1 - Press Windows + X to display the context menu

  2 - go to control panel

  3 - go to the system section

  4 click-and - drag the Windows Update icon out on your desk and it lay

• How to create the desktop icon in the taskbar

  Since I use my computer for graphic production, I have more disabled aero so do not flee colors through your work surface. On my XP laptop, a desktop icon I can click to minimize all open windows together there. This is handy when I want to use what is an icon on my desktop, but does not have added to the taskbar. How to create this icon. I don't want the version coming by right clicking on the windows Explorer icon, I just real desktop to appear. Thanks, Dave

  Make your choice.

  How to really pin the Show Desktop to the taskbar in Windows 7
  http://windows7center.com/tutorials/how-to-really-pin-the-show-desktop-to-taskbar-in-Windows-7/

  How to create a shortcut on the Show Desktop in Windows 7
  http://www.SevenForums.com/tutorials/26379-show-desktop-icon-taskbar.html

  Bruce Hagen ~ MS - MVP [Mail]

• After April updates installed WinXP so slow takes more than an hour to connect and create the desktop icons

  Just ran the April updates on Windows XP.
  Restarted, connected (connection to the normal domain but with no controllers available as domain is no longer in use and I don't want to mess with the settings of the user account).
  Very slow to build office, took several minutes just to display the wallpaper, then icons took a minute or two each to paint. Systray icons present but being not properly painted, taskbar autohide as expected, some startup app dialog boxes appeared as expected, but very slowly, still failed to see start/programs, too slow to do anything.

  Have not tried any uninstall or safe mode start-up etc. as hoping that someone already know possible cause and there are so many updates to eliminate this time!
  Any suggestions pls?

  Update - good news, seems to have fixed the
  After having tried to disable ZoneAlarms (never refreshed dialogue), disconnect from the network and disconnection (zclient termination necessary), log in as an administrator and seeing office paint normally (and ZA does not seem to have been disabled), logout, then again as a user and see an empty office for long hours that had to be reset , the next reboot and the connection seems to be functioning normally. Just a waste of time that meant machine didn't get used for a day and night I waited things.
  Guess I'd better try the update on my other machines now.

• Photos from the desktop icon

  I'm adding shortcut icons on my desktop and I would like to change the image.  At present, they are all links to Web sites, but at some point I'll add shortcuts to tutorials created in word, powerpoint, etc..

  Can you please tell me, step by step, how to change the image displayed in the icon.  I would like to make the image relevant to this topic for example a photo of keyboard on the shortcut for the talents of keyboard.  Easy to do in XP but Vista either can't or I'm not!

  Thanks in advance :-)

  Hi Peridotx

  Thanks for posting on Microsoft Answers.

  You create shortcuts on your desktop manually or if you drag and drop shortcuts on your desktop?  What method do you use to put your Internet desktop shortcuts?

  I have created manuallly an Internet shortcut on my desktop and then changed the ICON.  Here are the steps that my work.

  1 open Internet Explorer.
  2. opening of the URL (Web site) that I wanted, I then copied all the information of the URL from the address line (highlighted it and clicked and right click on copy)
  3. turned on the desktop and right click, new, shortcut
  4 paste in the URL, then click Next
  5. name of the shortcut
  6. right click on the shortcut
  7. click on Document Web
  8. click on change ICON
  9 selected my new ICON
  10. you click OK
  11. you click on apply
  12. you click OK

  Please let us know if the steps above helped you to solve the problem - thank you
  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the Desktop version, Tablet and phone. Help, please.

  I created a website in Muse. I created the Desktop version, Tablet and phone. But my problem is that, once I open my website on my tablet or phone it shows not always the correct form. Most of the time it's to show the offline version even if I am looking on my phone. What can I do?

  Hello

  I watched address phone and noticed 2 flaws.

  1 URL internationalchangepartners.com no redirects to internationalchangepartners.com/phone when I tried on the phone.

  Please do the following to solve this problem

  Hello, I made a site using the 3 platforms: desktop, Tablet and smartphone, but... on tablets and smartphones appears the design office, no idea why?

  2. now when I check link internationalchangepartners.com/phone I saw that the Menu options are linked with pages of the tablet.

  To over come this I suggest you to select hyperlinks with a lot of attention. Once you select the Menu item and add the hyperlink, select the option under the phone if you are available for the phone.

  Hyperlink has a separate list of the link for each structure. Look at the screenshot below.

  

  Once there 2 flaws were fixed there is no problem with the site.

  Concerning

  Vivek

• Shortcuts in the desktop or the Start Menu has not created

  Hello

  We use vWorkspace 7.2. and AppPortal for access applications on 2003 TS in transparent window mode. All published applications are accessible from the thick client or VDI computers. When I assign an application to vWorkspace folder, the icon appears correctly in AppPortal. Problem starts when I attribute the same request to "Remote Desktop files", in this case no entries are created, nor to the desktop or the Start Menu or any other option. When I change AppPortal to work in integrated desktop mode all entries are properly created.

  There are already a ticket about this Quest (CaseID:887952) support. After many hours of phone calls from the Technical Department explained what I need is available only when all of the TS Office are published. I find it hard to believe that I did the same thing easily with other 3rd party broker connection software. What is your experience, do you have "Remote Desktop Folder" work without providing complete desktop TS?

  Best regards

  Adrian Tonina

  Adrian,

  AppPortal is designed to run on your client computer of the end user and is able to show the shortcuts in the user interface or on the desktop of the client operating in desktop integrate mode (DI).  When running in mode of DI, only applications that are designated for the integration of office will have shortcuts created on the client for desktop/menu start.  You can specify in the properties of a managed application, Desktop Integration step.  Note that only applications that are assigned to the Connector vWorkspace records will be created through AppPortal.

  Applications that are assigned to the Standard and customized remote office records are created through our configuration of the Shell (pnshell) module, and their shortcuts are created on the remote (TS or VDI) desktop computers.  If configured properly, you will see them on the entire desktop of the remote session.

  -Adam

• I upgraded my Vista Home premium to windows 7 ultimate, shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created until the flash drive is reinserted

  during the upgradation he automatically took backup to an external flash drive, now every time I have to run has previously program I have to insert this flash drive.
  also all the shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created so that the flash disk is reinserted

  Hi subhshy001,

  Welcome to the Microsoft Windows answers Forum community!

  Try this if you do not have

  Windows Explorer to create the folders and shortcuts in your document folder, drag and drop them on your desktop.

  If you have completed the steps and was not even useful,

  Follow these steps:

  Try to create a shortcut and sending it on the desktop.

  (1) open: Start Menu ,.
  (2) right-click: Internet Explorer icon .
  (3) select: send to > desktop (create shortcut).

  There should be a shortcut on the desktop .

  Make sure that the "show desktop icon" has a check against it

  OR

  Just click on the empty part of the desktop, choose new > then select the folder to create. Right click on this folder , select Rename it.

  If the steps above do not work then:

  You can scan your computer for malware.

  You can download, install and update anti-malware free of your favorite search engine and find malware.
  
  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  If the scan comes back clean, so I recommend doing a System File Checker too l to analyze your OS system files.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. open an elevated command prompt . To do this, click Start , click principally made programs , Accessories , right-click guest , and then click run as administrator .  If you are prompted for an administrator password or a confirmation, type the password, or click allow .
  2. type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Is there a quick way to create a shortcut on the desktop instead of drag?

  I didn't notice a way to do more than to drag the address on the desktop. It would be cool to have an option of menu keyboard shortcut or bookmark - so I can't resize my browser in order to have room for dragging to the desktop, then resize again in full screen. I use FF 29.0.1, win7 64-bit

  Thank you!

  There was formerly a context menu entry to create a desktop shortcut; This extension adds this new item in Firefox.
  https://addons.Mozilla.org/en-us/Firefox/addon/deskCut/

• Record of creating file batch but the need to create a shortcut on the desktop and remove shortcut a day of age

  Hi dear I have not much experience in batch file writing but forums I dig a code and try to shape according to my requirments but after beating head couldn't get the correct result comes in front of you people help me please. file code of my baby
  off @echo
  MD C:\tempbackup\DAY_%DATE%
  MD C:\DAY_%DATE%
  Create shortcut f t C:\tempbackup\DAY_%DATE% - n "\Documents and Settings\eric\Start Menu\Proams"
  using this code, it create a folder and a file on the desktop as well, but is not a shortcut, it is just a file by name as the file Tempbackup.
  Basically, I want like this
  (1) I want to create the shortcut from the folder on the desktop of the file created in the folder Tempbackup
  (2) this file beats on execution will also remove old one day from the desktop shortcut
  so when I see this file to run. n IT run create the file in the specified folder, but no shortcut or create a shortcut without a path. When I click on the shortcut, it ask me how to open this file. so it's not a good shortcut or not a correct path.
  as I think that it good to mention here, that there is no other shortcut to other desktop I want to create so all DELETE option works perfectly.
  Please help me like you people can help...
  Eric
  ericcisco

  Hello

  Try these steps-
  Create the shortcut proposed (to cmd.exe/c start)
  Now, open properties such as proposed
  Add the full path in the 'Target' field with your own relative path and the app, for example
  %windir%\system32\CMD.exe /c start your_relpath\app.exe [your_args]

  That's all. However, doing so does not change the current working of the called program directory. If this is desired, then enter the following alternative:
  %windir%\system32\CMD.exe /c "cd your_relpath & start app.exe [your_args].

  The & is described as a command separator (see cmd /?). Note: Put something like '% CD%\your_relpath\' in the field ' start in ' doesn't do anything.

  You can try this as well-
  Create .bat file close record/yarn that you want to have the relative path
  Edit the file, and the file type: (as you want to open c:\bin\app.exe, and then place file beats in c:\run.bat)
  Departure bin\app.exe
  Save the run.bat file and double-click it to open it.

• Could not create the Microsoft Works word processing shortcut

  I want to create a shortcut for the Microsoft Works word processor on my desk, as I use it more often, and I don't want to go the Microsoft Works Task Launcher every time I want to create a new document. However, I can't find any where to drag and drop it on the desktop, I can't find it when I search. If I search "Microsoft Works word processor ' results come with the documents I created previously, but not the actual program." Please help me. Thank you.

  http://www.baycongroup.com/Vista/03_windows_vista_tutorials.html

  How to create a shortcut on the desktop?

  If the item is located in the start menu:

  1. Click Start. The start menu appears.
  2. Look for the item in the programs to which you want to create a shortcut. If the element is in a submenu of the menu, go to the submenu.
  3. Right click on the element. A context menu is displayed.
  4. Click send to. A submenu appears.
  5. Click Desktop (create shortcut). Vista creates a shortcut to the item.

  See you soon.

  Mick Murphy - Microsoft partner

• How to create a shortcut on the desktop to a Notepad document?

  I have something written down in Notepad and you want to create a link to that on the desktop

  Not sure if I understand the problem. But here's a response to just about anything if you do a RIGHT CLICK you get a MENU list and there you should find "create shortcut". Make a LEFT CLICK and you should see it appear in the folder your in. Then if you RIGHT click ON the shortcut you can 'COPY' or 'CUT' and then do a RIGHT CLICK and 'PASTE' anywhere.

  Good luck

  RickS

• During ANY installation of a program (e.g. Skype), I get the "year error occurred while attempting to create the directory C:\Program\Microsoft\Windows\Start Menu.

  original title: facilities program

  During ANY installation of a program (e.g. Skype), I get the "year error occurred while attempting to create the directory C:\Program\Microsoft\Windows\Start Menu. What happened with cd installs, but also downloads on the internet.  I already "took possession" of the computer, which is still delayed freaking, but am still unable to fight through all the questions of security, I guess that.  Any help would be greatly appreciated as I'm about to DOWNGRADE to something more user-friendly.  Thank you

  BTW, this is WINDOWS 7 Home Premium

  I had this problem for a long time on Windows 7. Finally, by pure chance I came across this solution that solved the problem. -Take the shortcut of the property

  http://www.SevenForums.com/tutorials/1911-take-ownership-shortcut.html

  You will need to run the "fusion" in the context menu of a reg file, published as part of the solution to change some registry settings. On any folder, you'll get a context menu 'Take Ownership' which restores the property correctly. This solves a lot of problems installing.

  Many people have trouble with this and therefore decided to post here.

  Gem of a solution. Thanks to GRIM and Brink on Windows 7 Forum!

  -Jayawanth