9.1 CUCM and 8.5 CUPS compatible?

Similar Questions

• CUCM and UCCX version compatibility

  Hello

  We are re-hosting UCCX to vmware with CUCM 9.x version 8.5.1

  CUCM and UCCX both will be on VMware.

  Someone let me know what CUCM 9.x supports UCCX 8.5.1base.

  We have only UCCX 8.5.1base DVD version for installation. I'm looking for the compatible version of 9.x CUCM to install.

  Pls let me know the CUCM 9.x compatible with version 8.5.1base UCCX

  Rgds

  Rajesh Kumar

  Hi Renon,

  This info is on Page 40 of the attached guide;

  Software and hardware compatibility for Cisco Unified Contact Guide

  Center Express and Cisco Unified IP IVR

  http://www.Cisco.com/c/dam/en/us/TD/docs/voice_ip_comm/cust_contact/contact_center/CRS/express_compatibility/matrix/crscomtx.PDF

  See you soon!

  Rob

  "May your heart always be joyful".
  And your song may always be sung
  Can remain you forever young. "

  -Dylan

• Although it is the dell DELL SAS business class model, can I buy a 600 GB 15.7 k sas 3.5 Cheetah? I could put any 15.7 k sas model in a dell and it is not compatible.

  can I buy a 600 GB 15.7 k sas 3.5 Cheetah without having the business class dell model?  I could put any 15.7 k sas model in a dell and it is not compatible.

  any help would be greatly appreciated as im new too servers.

  You can, and it can work properly.  All certified disk includes the risk of bad contact with the controller.  So, the answer is 'yes', but at your own risk.  Dell will also help you solve the problems of storage without certified readers, so if you go credits/retail, get ready to make your own troubleshooting - or be able to make experts if necessary.

  You may NOT USE the SME players on the controllers of the company although.

• Configure Jabber for Mac with local CUCM and WebEx Connect

  Hi, I was wondering if someone could set up the Jabber client Mac 8.6.2 to use the server of presence of WebEx Connect with a local farm the CUCM and connection of the unit. The tab preferences accounts show or allow the addition of voice services. I added work CUCM preferences plist file local, which, according to me, are the correct entries, however I still can't see the accounts under the Preferences tab. We currently do not have a presence server local cisco where the obligation of trial WebEx Connect Server because I can't get past the first step of configuration without it.

  concerning

  Paul

  You must connect to your Webex portal and activate these settings to connect.  Once they are allowed, log out/log in Connect and you should be able to configure CUCM TFTP, etc..

• Sony VAIO drivers and utilities are not compatible with Windows 8.1.

  OT: Sony laptop Vaio question.

  Hello.

  I was using Genuine Windows 7 Home Premium in my Sony VAIO laptop. Recently, I bought PRO 8.1 Windows and installed.

  Now, most of my drivers and utilities VAIO is not compatible! Support for Sony is saying, direct installation Windows 8.1 will be loss the drivers and utilities and we cannot install drivers and utilities more!

  The solution is that I have to install Windows 8 PRO and install and upgrade the sony vaio drivers and utilities. After that, I can do an upgrade to Windows 8.1 PRO.

  So, the question is, I download the installer of Windows 8 PRO but, PRO 8.1 Windows key does not accept!

  What should do? Now, I am running Windows 7. I need to upgrade to windows 8 and 8.1. Please help me solve this problem. All I need is to make my work with Windows 8 key.

  Reference:

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=1379 (see first)

  Thank you.

  Akhil

  Hi Akhil,

  Thank you for writing to us, we are happy to help Microsoft Community.

  What is the model number of the Sony Vaio laptop?

  I wish to inform you that the product key that is used for Windows 8.1 cannot be used for Windows 8.

  If you upgrade Windows 7 to Windows 8, you will need the key to upgrade of Windows 8. The retail version of Windows 8.1 product key cannot be used to activate Windows 8.

  However, the majority of drivers and utilities that are compatible with Windows 8 works correctly with Windows 8.1.

  Please let us know the model number of the laptop, so that we can get the proper drivers and utilities from the laptop.

  Forward to your response.

• Voicemail configuration base with CUCM and connections of the unit

  Hello again,

  I'm still very new to CUCM.  I am configuring a CUCMB 6.01 test deployment.  He has connections in the integrated unit.  I have 2 DNs assigned to users and Cisco IP phones.  I use MGCP (Cisco 3745 with 2FXO as gateway).  Now, I'm trying to extensions of voicemail installation for the users.  I read a lot of documentation on CUCM and unity, but I know that Unity Express is not what I need, and that you have not found information on the basics of implementing voicemail for users of CUCM.

  Users are DN 1001 and 1002 respectively.  They are part of a list of hunting (broadcast) so that the arrival of incoming calls, both phones will ring simultaneously.  Not sure if this has any bearing or not.  I would like to be able to put in place so that each DN rings on the IP phone say 6 times, then go to a Unity voicemail box configuration for that user.  I have already imported users 2 in the unit.  I ran the voice messaging port configuration wizard.  Everything looks as if it runs correctly, but I'm stuck really share say CUCM to route the call to the mailbox of the unit.  Probably the simplest part.  Ideas or help on this would be much appreciated.  Thank you in advance.

  Impetuous salvation,

  CUCM works this way

  So the fact that 1001 and 1002 receive calls via a group has a significant impact on this config.

  You must keep in mind that a call that is routed through the fighter pilot will always ignore the CFWD settings on phones of hunting member of the group. The normal way to control it then is through disconnection of the Group Hunt members phones combined with the front fighter pilot level settings.

  The following section describes how the parameters to call it forward on the phones of individual members Hunt are ignored when presented a call via the hunting feature. Here's a clip;

  Hunting and call forwarding

  The concept of hunting differs from call forwarding. Hunting allows Cisco Unified Communications Manager to extend a call to one or more lists of numbers, where each such list can specify an order of hunting which is selected from a fixed set of algorithms. When a call extends over a part of hunting of these lists and the party does not answer or is busy, hunting resumes from the next part of hunting. (The next party of hunting varies according to the current hunting algorithm). Hunting has so ignore settings call forward No Answer (CFNA), call forward busy (CFB) or call before all (CFA) for the party to attempt (group member line phones).

  Cisco Unified Communications Manager offers the possibility to redirect a call when hunting fails (that is, when the hunt ends without a part of hunting to the respondent, due either to exhaust the list of numbers of hunting is to expire). If used, this final redirection includes an automatic call forwarding action. Therefore, the fighter pilot Configuration window includes call forwarding configuration concepts which are similar to those found on the directory number Configuration window.

  Example of a call hunt

  Although hunting is different from the transfer, Hunt often develops as a call that gets forwarded to a certain number of fighter-pilot. The protective cover of appeal extends from hunting to allow the final drive after two exhausts of hunting or expires.

  A typical call calling hunting can include the following phases:

  The appeal of hunting through groupings of posts set up according to the algorithms implemented for each group. Hunting is successful (if it meets a hunting party), exhausts (if all parts of hunting are tempted, but no response), or expires (if the deadline set by the Maximum hunting timer runs out before that all parties are tempted, and none of the parties who have tried to answer).

  For the purpose of this example, we assume that hunting does not succeed.

  If a form any of the final drive is configured, the call forward for a next destination; otherwise, the call is released.

  Maximum hunting timer

  The Maximum Hunt Timer field on fighter pilot Configuration window allows the administrator to enter a value (in seconds) to limit the hunting through a list of hunting season. After gaps in the time specified, if hunting was not successful, the call is transferred to a voicemail system, a specific compound number, or some personal treatment (if configured) or the call is released.

  The good doc.

  http://www.Cisco.com/en/us/docs/voice_ip_comm/CUCM/Admin/6_0_1/ccmsys/a03rp.html#wp1078922

  If the call goes unanswered or all Member phones are disconnected, then an attacker needs to be applied at the level of the "fighter pilot".

  Hunt the settings forward

  Before hunting without an answer - when did not answered the call which is distributed through the list of hunting at a specific time, this field specifies how to transfer the call.

  Destination this parameter contains the number of the directory to which calls are forwarded.

  Before busy hunt - when the call which is distributed through the list of hunting is busy at a precise moment, this field specifies how to transfer the call.

  Destination this parameter contains the number of the directory to which calls are forwarded.

  Maximum Timer Hunt - enter a value (in seconds) that specifies the maximum duration for hunting. (Used in conjunction with Forward busy hunting)

  In your case, it is best to configure the DN of a fighter pilot in the extension of alternatives under the 1001 and 1002

  mailbox.

  I hope this helps!

  Rob

• Question about commissioning of the E20s - CUCM and TMS

  If we now run software CUCM 8.6.2 and 4.1 E20.  I played with CUCM and TMS supply by and a few questions.

  It seems that there are some features that can be set via the TMS models that cannot be resolved via CUCM (MTU, custom, etc commands).  Is it possible to apply these settings through TMS while having the unit registered in CUCM?

  Essentially, I want my call recording platform CUCM and control, but want to keep the granularity that TMS offers in terms of commissioning etc..  I expect the same problems with C-series, etc.

  Am I right in saying that, in order to get the E20 to join CUCM, I need to define the external Manager to "CUCM", and thus eliminate any possibility of TMS to manage? Otherwise, what is I could have managed by TMS and then set the SIP of the E20 to point to CUCM via templates in TMS?

  Any tips on that?

  Hello

  Having both TMS and CUCM to manage endpoints is not a good idea (yet). TMS and CUCM will return to each of the other toes with unpredictable results.

  With TMS 13.2, I understand that you should be able to import the CUCM in TMS and then find all systems registered to it and import these into TMS, however in this case TMS plan only systems conferences and will manage them not active (you can see status of the call as well).  13.2 TMS is not yet released, so that's what I said must be in this version.

  So basically now if you use CUCM, use CUCM provisioning and don't use TMS.  We focus on interactions with systems registered with CUCM TMS and it will be more developed on this in the future.  I recommend you check out the TMS13.2 release notes released to see if it is mentioned.

  Thank you

• SIP URI B2B calls via CUCM and Highway

  Hi all

  Cannot find out how to configure the SIP URI from SX codecs, recorded calls on CUCM.

  I CUCM and IM & P 10.5.1 a pair of X8.5.2 expressway with two areas of course - for B2B calls, and the external jabber.

  I want to make calls of SX-codecs outside via SIP, by using the URI field, for example, [email protected] / * / or [email protected] / * /. How can I configure that?

  I already have the routing model, which is the SIP Trunk for Exp - C, for H323 calls by ip address. Is it possible to make a routing model to call the SIP URI?

  You can see my deployment in this image.

  fghj.PNG

  

  Best wishes

  Igor

  Hi Igor

  These guides will help you resolve your issues:

  http://www.Cisco.com/c/dam/en/us/TD/docs/voice_ip_comm/Expressway/config_guide/x8-5/Cisco-Expressway-SIP-trunk-to-unified-cm-deployment-guide-CUCM-8-9-10-and-x8-5.PDF

  https://supportforums.Cisco.com/ru/video/12362936

  BR Oleksandr

• Computer makes a sound random bing and the word "Cup" will Flash in the lower right, questions also play photo slide show.

  Original title: random noise

  My computer is to produce a random audio bing and the word "Cup" will Flash in the lower right.  I connected a new keyboard, and then my speakers did not work, then I reconnected it to them.  The speakers work, but now this problem.  Also, I had a photo slideshow on my desk and now as a watch and everytime I try to change it to play the slideshow, it bings and changes back to a photo.   I tried to reboot several times.  Can anyone help?

  Run your anti-virus software, then download and run Malwarebytes Anti-malware program. Delete everything they find.

  Re-post if they find something, but the problem comes back.

  See you soon,.

  Jerry

• can't make an external call with CuCM and H323 gateway

  Hi experts, I have a problem with CuCM and h323 Gateway. I use a 2811 router to make a gateway H323, CuCM server and Switch layer 2 build a VoIP LAB, this my network:

  

  and my router configuration:

  Current configuration: 2335 bytes

  !

  version 12.4

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  router host name

  !

  boot-start-marker

  boot-end-marker

  !

  forest-meter operation of syslog messages

  !

  No aaa new-model

  !

  !

  !

  dot11 syslog

  IP source-route

  !

  !

  IP cef

  DHCP excluded-address 192.168.1.1 IP 192.168.1.10

  !

  IP VOICE dhcp pool

  network 192.168.1.0 255.255.255.0

  option 150 ip 192.168.1.2

  default router 192.168.1.1

  !

  !

  No ipv6 cef

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  voip phone service

  h323 connections allow h323

  allow connections h323 to SIP

  allow connections sip h323

  allow sip to sip connections

  service additional h450.12

  Fax protocol cisco

  !

  !

  !

  vocal h323 class 1

  H225 timeout tcp establish 3

  !

  !

  !

  translation of the voice-rule 1

  rule 1 / ^ 9.

  !

  !

  voice translation-profile PSTN

  translate 1 called

  !

  !

  voice-card 0

  !

  !

  application

  Service flash aa1: its - cisco.2.0.2.0.tcl

  paramspace English language en

  paramspace English index 1

  Param aa-driver 0839959204

  paramspace location English flash:

  prefix English paramspace

  !

  !

  !

  Archives

  The config log

  hidekeys

  !

  !

  interface FastEthernet0/0

  IP 192.168.1.1 255.255.255.0

  automatic duplex

  automatic speed

  H323-gateway voip interface

  port of link voip H323-gateway 192.168.1.1

  !

  interface FastEthernet0/1

  no ip address

  Shutdown

  automatic duplex

  automatic speed

  !

  IP forward-Protocol ND

  no ip address of the http server

  no ip http secure server

  !

  !

  !

  control plan

  !

  !

  !

  voice-port 0/0/0

  cover of the echo - cancel 32

  connection ERA opx 3100

  Description 08395959204

  activation of the caller ID

  !

  voice-port 1/0/0

  !

  voice-port 0/0/2

  !

  voice-port 0/0/3

  !

  !

  !

  1010 Dial-peer voice pots

  Service aa1

  incoming called number 08395959204

  direct line to inside

  port 0/0/0

  !

  voice pots Dial-peer 2020

  PSTN description

  translation-profile outgoing PSTN

  destination-model 9 t

  Setup progress_ind allow 3

  progress_ind enable progress 8

  port 0/0/0

  Forward-digits all the

  !

  Dial-peer voice 10 voip

  destination-model 1...

  Setup progress_ind allow 3

  progress_ind enable progress 8

  h323 voice-class 1

  session target ipv4:192.168.1.2

  DTMF-relay h245 alphanumeric

  Codec g711ulaw

  No vad

  !

  !

  !

  !

  Line con 0

  line to 0

  line vty 0 4

  Cisco password

  opening of session

  !

  Scheduler allocate 20000 1000

  end

  I have configured the gateway h323 and attach files to router parttern on follow CUCM

  What is the problem and how to solve?

  Thanks for all the help.

  Your DP pointing CUCM is wrong, or your ÉRA OPX, depending on what you need.

  voice-port 0/0/0

  cover of the echo - cancel 32

  connection ERA opx 3100

  Description 08395959204

  activation of the caller ID

  Dial-peer voice 10 voip

  destination-model 1...

  Setup progress_ind allow 3

  progress_ind enable progress 8

  h323 voice-class 1

  session target ipv4:192.168.1.2

  DTMF-relay h245 alphanumeric

  Codec g711ulaw

  No vad

  Your DP is waiting for 1... and you send 3100, they must match.

  You might need to change the significantt numbers and entering CSS, but only you can know

  For outgoing, you are throwing 9 predot, but again, expect it in your RFP, again, change as you need.

  voice pots Dial-peer 2020

  PSTN description

  translation-profile outgoing PSTN

  destination-model 9 t

  Setup progress_ind allow 3

  progress_ind enable progress 8

  port 0/0/0

  Forward-digits all the

  You cannot transfer the numbers all send you also 9 for each call

  Change your configuration you want / need.

  HTH

  Java

  If it helps, please note

  www.Cisco.com/go/pdihelpdesk

• "This version of Photoshop CS6 and Illustrator is not compatible with my computer"

  CS6 Photoshop and Illustrator are not compatible with my computer. Y at - there is a downloadable version of CS6 Photoshop and Illustrator? I downloaded the CS6 Design and Web Premium and individually, neither worked. I have a Mac OS X Version 10.6.8

  N ° if this message appears, you are running on an old processor Core Duo of first generation on a MacBook/iMac/Mac mini and it simply is not compatible, no matter which version of Mac OS x. It lacks the specific chip components required to get the code.

  Mylenium

• 10.5 (1) CUCM and connection of the Unit 9.1 compatibility 2

  I intend to use the PCD to migrate my MC Call Manager 8.0 (3) cluster to 10.5 (1) early next week. I have a connection of the self-government unit 9.1 Server 2 and I read conflicting information on Cisco's Web site on their compatibility. A page says they are compatible (http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/compatibil...) and another page says that I should update the unit connection at least 10.0 (http://tools.cisco.com/ITDIT/vtgsca/VTGServlet). Can someone clarify this for me please?

  If the connection of the Unit 9.1 2 is incompatible with CUCM 10.5 (1) and I need to upgrade, how do I do first - or if they can be done safely at the same time. If I first Call Manager, unity connection will be 'dead in the water' until I updated?

  Thanks in advance!

  Lisa

  They are compatible, CUC is always a wildcard, because it will work with virtually any CUCM on device

• How to open PDF in Illustrator and not the half compatible pdf file.

  First we get a form of proof digital printers as .pdf. Sometiems. what they save them with compatible PDF. This makes my job more difficult because will get ilustrator asking all the links when you open the PDF.

  What we do is open the printere .pdf form and paste this on topof the moose .ai files. Thi sis to evidence theyt changed. Add in their product numbers and the update of the CUP are just what we want to see. What we are looking for is type of move, or lack of elelements.

  MAS OS 10.8.4, HAVE CS5

  Sorry for posting figured this out.

  

• I have Webroot Security and Firefox is not compatible with the malicious URL part of the program? How can I protect myself?

  When I downloaded Firefox and checked my extensions, I've been informed that Firefox is not compatible with the prevention of malware from my Webroot security package. I use it successfully with Windows and just renewed for another year. What do you do to protect myself? I'm not a computer expert, so if you can answer in plain language that would be appreciated. In addition, we stream video much and I noticed that DivX is also not compatible. What should I do about it? Thank you.

  Firefox has had its own fake Web / since 2008 malware protection.
  
  http://www.Mozilla.com/en-us/Firefox/phishing-protection/

  Firefox Add-ons developers are responsible for these add-ons up to date as new versions of Firefox are available. Check with Webroot & DivX on updates for their Firefox extensions.

  That said, the modules that are hosted on the official website of the AddonsMozilla.Org are tested and 'hit' by compatibility automatically, if these modules are considered to be compatible with a new version of Firefox that is about to be released. For modules that are not "compatible", the developer of the add-on Gets an email telling them basically what needs to be fixed. AMO extensions hosted are automatically updated as required by Firefox. The 'check' available updates each time is that Firefox is open.

  For modules that are not hosted on AMO, there is a 'updateURL' function that allows to have Firefox check for an update across the internet, the a particular extension developer said. Unfortunately, too many developers take advantage of this feature and needlessly let their users to search an update themselves. who then need to manually install the hotfix or update version.

  It's like a bunch of clowns of circus without master ring to 'bring in the clowns' at the right time in the show.

• Safari doesn't play videos Netfllix and gives a HDCP compatible display error

  I am able to watch netflix on any other browser. When I try to play anyv netflix videos in Safari it gives the message error "Ah, something went wrong" and HDCP compatible display error...

  Greetings Hawkdive,

  Thank you for using communities Support from Apple!

  I understand that you are not able to play videos from Netflix in Safari on your Mac, so that you can without problem using other browsers. In this case, I recommend reading over and working through the troubleshooting steps suggested in the following Help article Netflix.

  Netflix error S7363-1266-48444350

  Have a great day!