9850 display size of the problem

Similar Questions

• Display size of the files that make up a LAW degree?

  Does anyone know if there is a way to display "size" in the LLB Manager?

  In a project or lvlib.

• Size of the problems after the system partition resizing - are X 201 hard drives using a particular geometry?

  I recently copied my default system hard disk (320 GB / Western Digital) on a larger hard drive (500 GB / Hitachi) which I also ordered through Lenovo.

  Using a disk imager I first copied the old 1:1 the new disk drive. It gave me an exact copy of my original disk, with about 150 GB of space disk unallocated at the end of the training. I then put this copy in the system and it worked very well, I could start and work at it.

  -With the help of Acronis Disk Director 11 - I moved the hidden partition Lenovo restore to the end of the new drive, and then finally I expanded the system partition to fill all the available space before this recovery partition, giving me a system about 430 GB drive.

  These operation seemed to go very well at everything first, but in the end I got an alert that something had gone wrong and now the disk may be corrupted. Strange, I was able to boot from the disk and everything went well in the beginning but in fact - I now have a very weird problem: when you look in the Panel-online-online disk management management system all partitions are located and that I had the intention of size. The recovery partition (~ 17 GB) is at the end and the system partition is indicated as approximately 430GB and about 60% vacuum. Explorer Windows, however, always reports the size of the old partition (~ 280 GB) and only 10% of empty space, while if there is no resizing the partition space taken.

  In other words: different parts of Windows 'see' and report to different partition sizes. Running chkdsk does not resolve the issue.

  I then realized this phenomenon in the Acronis Disk Director forum and some guys Acronis replied, that problems of resizing and therefore also the difference could be due to the fact that IBM/Lenovo uses a geometry to non-standard head of 240 heads instead of 255 heads. ????  I then asked for details and - if possible - instructions - how we could solve this problem, but got no further response so far.

  Any idea what he's talking about? Lenovo indeed uses some non-standard disk or geometry? I would have thought, that the access disk is the disk drivers? Lenovo have to do here? Or BIOS of the device involved here?

  And finally: has anyone some experience with this problem and can give an idea how to solve this problem? I'd really like to * hate * restart everywhere have to reformat the hard drive and reinstall everything again!

  Michael

  Thanks for this info!

  I'll try to get my wrecked HD using the Paragon suggested partitioning program and I guess, I'll also try to get a refund on DiskDirector 11, since the site explicitly, it is fully ready Windows7, which obviously isn't!

  Michael

• Displays error message the problem report for this solution has been deleted or modified on the computer and is no longer available installation multifunction printer

  Original title: solve PC issues icon

  install your all-in-one printer driver, then click on it, then it will take you to a screen that indicates the problem report for this solution has been deleted or changed on this computer and is no longer available. But since it is presented as a problem, it's not going to disappear.

  Hello
  1. What is the brand and model of your computer and the printer?
  2 did you change on your computer before this problem?
  3. the printer is working correctly?

  4. are you clicking on a program from the printer or printer driver file?

  Look for error messages in the device to the printer driver manager.

  a. Click Start.

  (b) in the search box, type Device Manager.

  Follow the suggestions and see if it works very well.
  Method 1
  Check if the problem persists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 2
  You can uninstall and reinstall the printer and see if it works very well.
  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  See also:
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• Foglight display size of the modal dialog box

  Hello

  Dashboards drilled down, I can choose how to display the detailed view.  So I chose popup--> the modal dialog box.  Now when I click on a line, instead of leading me to another page, it will display a popup window and view detail info.  The popup window has a fixed size and I can't change it.  Is there a way to change or set a certain size?

  Yes. You must change the settings from the view of exploration down, not the parent view. The settings are located under Configuration-> Options of Popup. You can play with the default size, size maximum and scroll bar to display the drilled down. It took me a while to figure this one out myself.

• How to display the file size and the number of files in the folder

  I have a laptop and a desktop at home. When I open a folder on my laptop, my laptop display size (on the bottom right corner) and the number of objects (at the corner of bootom left hand) of this file the bottom of the window.  But I don't see this information on my desk. I tried to play with the Option - view folders... but always in vain.  Can I know what is the correct way of doing things?

  Hello cscs77, welcome.

  The option that you are referring to I think would be the bar of "Status". This gives a test:

  1. open 'My Documents '.
  2. at the top, click on view > status bar

  That should solve your problem. Let us know,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PDF adjust the display size

  Hello!. When you save a PDF file in Illustrator, what should I do people who opens the file can see the document ALWAYS like display size "adjust the height?

  I hope you can help me!

  NAT

  There is nothing you can do. It's completely out of your control. While you can set a default for your PDF view, the user can override these settings on its own end.

  Mylenium

• How to keep the same display size on second or harvest more

  If you crop a second time or more, the performance of the full display to the original image with the cropped gray part. I would like to be able to crop a second or more time using the display size of the first harvest only. Is this possible? This is particularly useful with heavy crops.

  Derek,

  I see what you mean, but there is no way to get LR do this for you. You could put in a request to feature on the official website:

  http://feedback.Photoshop.com/photoshop_family

  HAL

• After that you increase the size of the page with Ctrl plus, is there a way to keep the new setting?

  My new laptop has great features but a much smaller screen. Change the screen resolution in Windows makes it all look terrible. Using ctrl / + in Firefox to increase the page size solves the problem, but only until you go to a new page. Is there a way to keep the new setting until what reverse you it with ctrl/less?

  There are some add-ons that can be used to change the zoom level on all sites, for example:

  • NoSquint - https://addons.mozilla.org/firefox/addon/nosquint
  • Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level

• The problem of recognition of graphics card - games but not play videos in VISTA.

  I have a VISTA 32 bit OS and I use a NVIDIA Geforce 8600 graphics card. Windows recognizes that the graphics card is installed and I can play with my normal settings. I am able to put a 1280 x 1024 resolution and the graphics card appear in my display settings. The problem comes when I try and play the videos or anything that requires the graphics card in Windows. The video plays but is extremely rough, performance windows rated my graphics as 1.0 performance index and Director of windows will not open even as it says I have no graphics acceleration. I uninstalled and reinstalled the card but windows itself seems unable to use card during normal operation of windows only in games longer. Please help it's driving me crazy that the card seems to be working but windows is in conflict with something. Thank you, Michael.

  Hello

  Check with Nvidia Support and their forums might be a known issue.

  -NVIDIA drivers
  http://www.nvidia.com/download/index.aspx?lang=en-us

  Support NVIDIA
  http://www.nvidia.com/page/support.html

  NVIDIA forums
  http://www.nvidia.com/object/nvidia_zones.html

  1 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------------------------------------

  2 could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  It's my generic how updates of appropriate driver: (manually updating your display and video driver - do)
  do not use the Scan for drivers - enter manually the information.)

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - reset after each
  installation.
  
  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• How can I know the actual size of the type in a document of intent 'web '?

  I'm designing a document for iPhone 6plus pixels (1334 x 750) and need to know how translates the size. For example, when I call a text 30 PT., in the real world on the iPhone it's something much smaller than this... maybe 12 pt. This has something to with the number of pixels in the canvas... but how to convert?

  So, how to calculate the actual size of the type? I'm not good at math, I need to be told how to do it.

  For the output and display at 100%, InDesign defines the physical size of a pixel as "1/72, so the relationship between the print type size and displayed size of the iPhone is a simple report. For the iPhone6 72/326 Gets the relative size of the print to display discount, and 326/72 would be a multiplier. So to display 12pt type how it would print, set it to 54.4 pt (12 x 4.53). Or, to view a 1 inch by 1 inch square, resize it 453%.

  For the iPhone6 more the multiplier is 401/72 or 5.57

  Apple - iPhone 6 - technical specifications

• FFx displays only in the tiny size of the thumbnail since update

  Since FFx updated it displays only those things in a tiny size of the thumbnail. This should be a page full size of print is only an unreadable thumbnail.

  I have not modified parameters. On the file > menu print preview, it shows "reduced to adjust" and on the layout, it is set to portrait. All margins are set to half an inch.

  My Brother laser printer works normally when using the Chrome browser. Why so many problems lately with FFx?

  I don't know if this will help, but in another recent thread, the user has discovered that the problem was the preference:

  • printer_printer_name.print_paper_data

  It has been set at 256, and changing the value to 1 has solved the problem of paper size.

• How can I change the menus of fonts, size of the items listed in the display properties (and others)

  I went through all the font size changes allowed in this menu and none of this changes the font size of the words on and in the display properties it auto box.  Win XP SP3

  Hi JohnAlaska,

  If necessary, change on the computer before see you the change? Have you installed new hardware, software or updates? Given that this problem occurred a few says ago, System Restore can help to restore the settings.

• Recovery system causing problems with the size of the screen.

  Due to some problems I had, I finally had to yield and perform a system recovery back to the manufacturer's specifications.  Once this is done, I downloaded all the updates to Vista, all the drivers, etc..  Everything is square and works fine now, with a big problem.  I bought a monitor 20 "a few months ago.  It worked fine before the recovery is done.  Since the resumption, the display is smaller, as if I still had the old monitor 15 '' on the system.  I did that the driver for the monitor is correct and up-to-date.  I found a way to enlarge the display of the size of the screen in an online search, but it does not clear up the problem.  For example... If I go to a site like the Pogo, the bottom of the site is almost normal size for the monitor, but the game pop up displays the size of the screen 15 ''.  I tried everything I know and can't get this last problem fixed.  Any suggestions would be greatly appreciated.  I also checked the resolution and makes sure it's OK for this monitor.  Thanks for your help.

  Do you have the driver from Microsoft or directly from the manufacturer?  If Microsoft, go to the manufacturer website and download THE latest drivers applicable on your screen and the version of Vista (Microsoft sometimes cause problems).  Does the monitor require any firmware - if so, download and install that too much of the manufacturer's web site.  You can also update the video card drivers and firmware just in case it is the underlying cause of the problem - again go to the web site of the manufacturer to get the files rather than using those available through Microsoft.

  Go to start / Control Panel / customization / display settings / and make sure that your monitor is displayed in the drop-down list.  If this is not the case, click on the box and see if you can find your monitor and then select and make the box extend the desktop to this monitor is selected.  Go into the advanced settings, click list all Modes and try one at the top, if it is not already selected (assuming that it is appropriate for your monitor).  If this does not help, try others that are compatible with your monitor to see if you can find one that allows you to achieve your goals.  It may not work, but it's probably worth a try.

  Other than that, I don't know what to think.  You already seem to have covered most if not all of the bases.  If the above does not work, maybe someone else review this thread will have other ideas to offer.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem on the size of the screen.

  I write a custom screen named mylistscreen, get the data from the first screen and show it.

  In the first screen, there are a lot of buttons and an editfield. Click on the button or search editfield send data to mylistscreen. The data are different button and editfield.

  The problem is:

  in mylistscreen, I try this code: Dialog.alert (Integer.toString (Display.getHeight ()));

  This code cannot obtain the correct size in the storm Simulator

  But the blod Simulator will show the correct size

  Why?

  If you have compiled and packed your code using the version 4.7 or later (ie., 5.0) then you should get 480 as the result of Display.getHeight () call when the virtual keyboard was invisible (hide) in the model of storm