A Bug in EF SqlGenerator thread

Similar Questions

• Export of Photoshop CC as bug desktop folder - new thread for awareness of this problem

  As advised, opening a new thread to make aware of this bug.

  With the help of 10 64-bit Windows and Photoshop CC 2015 with all latest updates installed. Users to meet the following bug:

  As a quick export or export and save the result in the folder target being open on the users system, which means that the window should be closed to return to your workflow.

  It's extremely frustrating and time-consuming, typical workflows are broken because of this problem

  Details of users and, if no solutions can be found here:

  Re: Photoshop CC 2015 export as bug Desktop folder

  Thanks to any of the Adobe staff who might well want to take a look at this ongoing problem.

  Hi jhourihane,

  This has been identified as a bug in Photoshop and we are working on a solution.

  Kind regards

  Assani

• Channels not defined in Combo Box Bug?

  I found a problem with the drop-down list box control:

  1. create a drop-down list box and deselect 'allow Undefined Strings.

  2. run the VI

  3. Select a list box item

  4. press on the BACKSPACE key to remove a few letters of the item

  5. click on on the front panel

  The combo box is filled with a string not set!

  Disabling the BACKSPACE key is not a valid work-around because the user may need this while typing the value.  Expected behavior of the control would be to restore the previous value.  Any comments?

  Yes.

  Take a look at the bug report in this thread.

  http://forums.NI.com/NI/board/message?board.ID=170&thread.ID=379475

• minor bug extracted from vi?

  I created an excerpt, but the content of a constant of cluster has not been posted in the png, but it shows up if I dragg in a diagram.

  

  It happened with a cluster "selfmade". But if I do a constant to create on a sinusoidal waveform, mark it and create a snippet that I get the result that you see.

  LV 2009 f 3 on XP

  There is already a CAR for this bug. See this thread/message.

• Attachment is not available.

  Cannot open email attachments; get the meage to a red x indicating the attachment is not available. How can I fix it?

  If you are using Windows Mail in Vista and installed IE9, then open the message in a separate window and then you should be able to get the correct setting.  Its a new bug.  See this thread: http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/windows-mail-font-problems-after-installing-ie9/a4274c96-d44f-e011-8dfc-68b599b31bf5

  Otherwise, see www.oehelp.com/OETips.aspx#1

  Steve

• Convert the Document to the problem!

  Hello dear friends,

  I have very strange problem:

  Converting Microsoft Word 2013 To PDF (seen on 300 Pages) sections are not converted, not displaying not properly... I have attached the screenshot of the converted document to...

  Please help how to solve this problem?

  

  So it's Microsoft Word Bug and close the thread "with the correct answer.

• Update causing Lightroom XMP read questions?

  I am incredibly frustrated at the moment. I searched but I can't find anything. I spent the days all the photos I took for my video of period of treatment. Thousands. And then Lightroom has this annoying problem with sync moving place. It seems if you synchronize more than 4-5 photos at a time (doesn't really work for thousands of images), you're good. If this isn't the case, the source, he pulls from the place of replacement, transforms each photo. And so for the timelapse, you see this flicker, since the source changes based on photo by photo. I thought that, maybe, I need to update? Yes, I did. At the time wherever I did, my pictures went into the toilet.

  I am writing my changes to XMP, so that when I save them and use these backups, the changes are still there. I have dealt with the photos like I said, upgrade from lightroom, and now everything has changed. They have the 'appearance' of the photo as it was - before the update to lightroom. If I wait a second or two, he moves with the change. Let me stress, however - the changes are IDENTICAL. Not a single parameter change. All the settings are on, they have the same settings of the same too. Now, I've provided two pictures, the pre (before a second or two passes and adjustment shows) and the photo after he sets himself. I don't understand what is happening. I tried the metadata > reading metadata and that did not work, it just instantly shows the appearance 'up-to-date '.

  This is what it looks like before it adjusts.

  

  A second more later, it moves in this appearance. Yet, nothing has changed - other than the update of Lightroom.

  

  Please, I beg you for help. I don't think I could last again to change some sequences of thousands of photos. Everything faded color, Blacks are not as dark as before. And I have not changed anything, other than the update of Lightroom.

  You have the Nikon D810 bug? See this thread.

  Re: The latest version of CRD is broken for the Nikon D810.

• Flickering of the screen while the edition of tiff files makes me lose all changes.

  When you edit a tiff file it causes my screen flashes, I tried with GPU power on and off and the same behavior, if I am trying to change a slider during this flickering I lose all changes to tiff. I know what is happening to more people as I've seen on the forums, this happens to me on two different one computers a MAC Pro and the other a PC.

  For example, I go to NIK and make a change and then go back and Lightroom starts flickering / refreshing and when this happens if I'm dragging a slider it will reset all the changes to this picture.

  Please help as I am unable to use Lightroom at the moment.

  Many people have reported this problem, Adobe has recognized as a bug.  See this thread in the official forum for feedback to Adobe for workarounds: a TIFF from LightRoom 6 recharge after each change, development of potential data loss.  Don't forget to add your vote and opinion to make it more likely Adobe will give priority to a solution.

• Triggers the hide when clause

  I have a when clause contained in the header of an insert trigger that does not appear when you use SQL Developer to view the code.

  select
    text
  from
    user_source
  where
    name = 'FOO_INSERT_B_TRG'
  order by
    line;
  
  TEXT
  ----
  trigger bar.foo_insert_b_trg
    before insert
    on bar.foo
    for each row
    when (new.foo_id is null)
    declare
  begin
    :new.foo_id := key_pkg.create_key_f ('BAR', 'FOO');
  end foo_insert_b_trg;
  
  9 rows selected

  However, when I go back to the code by double-clicking the trigger I get this.

  create or replace 
  trigger bar.foo_insert_b_trg
    before insert
    on bar.foo
    for each row
    declare
  begin
    :new.foo_id := key_pkg.create_key_f ('BAR', 'FOO');
  end foo_insert_b_trg;

  Note that the 5 line, which has my when instruction, is missing. It is originally this line to actually be deleted when we open the object, modify it, and then save it.
  
  Published by: mimi on March 22, 2013 11:55
  
  Published by: mimi on March 22, 2013 12:01
  
  Published by: mimi on March 22, 2013 12:04

  Hi mimi,

  This problem has been reported before on this forum:
  Unable to see the WHEN clause for a trigger.

  The bug referenced in this thread is a regression in SQL Developer 3.1. and remains open. Any bug comments:

  With only minimal privileges, we query all_triggers to get only the package
  body (when-clause kept in a different column), whereas with
  SELECT_CATALOG_ROLE or DBA role we query dba_source that contains the full
  trigger source.
  

  Alternatives to work around this issue are:
  1. keep several versions of SQL Developer installed, using 3.1 when you need work with triggers.
  2. get additional privileges to avoid regression in 3.2

  Hope this helps,
  Gary
  SQL development team

• Search function in the project tab no longer works in 8.0.1.21 Mac

  I reported another bug in a separate thread.

  Did anyone else get this?  It is grayed out.

  Hi Mark,

  Yes, it has finished indexing, but you gave me an idea.  It is with a great project.  I opened a smaller and the search function has been activated and works well.

  So I trashed the media Cache in the larger project where research was MIA, and... still no luck.

  But I started to denigrate unused items and remembered "Edit > delete is not used," and brought the search box.  Thus, it seems that some element of the project was originally research project must be disabled.

  So let's examine this question an answer.  Thank you, Mark and Kevin.

  Jim

• problem creating oscustomisationspec from the command line

  Hello

  I have a problem when you create or modify a command line oscustomisationspec

  If I change the administrator password or domain password I have a problem when you use the customisationspec

  error is cannot decrypt the password

  the public key in the specification does not match the public key of vcenter...

  When I create this oscustomisationspec of my xp machine I have no problem

  When I create my Management Server I have the problem

  and when I create it from the vcenter itself I have the question too

  I don't understand why I'm using the right button of my computer and not a server

  If I create the customspec of the client vsphere vcenter or on the management server, it works well

  Another thing

  If I export customization of my computer the plain text for the password value is false

  If I export the customization of the server the value of plaintexst is true

  my machine is xp

  the waiters are win2003 and win2008

  can anyone help?

  Hello, DanielSoares-

  This could be linked to the bug referenced in the thread to the http://communities.vmware.com/thread/297748.  Here, broedi and vitalibaruh done by are the property of plain text for passwords in the spec is set to $false instead of $true when.  They discuss this issue when using New-OSCustomizationSpec to clone an OSCustomizationSpec, but I got the same behavior you describe when you create a new persistent by using New-OSCustomizationSpecOSCustomizationSpec.

  In the thread (the post to http://communities.vmware.com/thread/297748?start=18), vitalibaruh (from the team of PowerCLI) mentions that he's filed a bug for this behavior.

  So for now, the solution seems to be to create the OSCustomzationSpec via the vSphere client and, if you want to work with a copy of the spec (to add/modify credentials, for example), use the API to clone the spec (via the DuplicateCustomizationSpec() method) and then use Set-OSCustomizationSpec to make changes to the clone.  I've posted an excerpt on the use of this method twice in this same thread.

  Is not ideal, but that market.  I hope this helps.

• /Apex/apex_authentication.callback at Apex 4.1.0.00.32

  Hi all
  Please let me know if /apex/apex_authentication.callback URL is not called in version 4.1.0.00.32 for the collection of the credentials of the Apex?
  
  I am trying to use the "HTTP header Variable" authentication scheme with my Access Manager. I have another local Apex environment where I am able to see that this URL is called during authentication.
  
  For this reason, my access management solution works with 4.1.1 and not 4.1.0.00.32. I have to use the 4.1.0.00.32 Apex version environment.
  
  Please comment. Thank you!!

  This is a known bug. See the thread for more details:
  Re: HTTP header Variable

  This problem is fixed in 4.1.1 or you can ask the Group of hotfixes:
  12955671 HTTP HEADER VARIABLE AUTH: REDIRECT INFINITE IF USERNAME IS CASE SENSITIVE

• Report with the ID static in translated Applications

  Hello
  
  I have some reports in my application using ID static, so it is easier to manipulate a few things in javascript.
  In my initial application, all works well.
  But now, I have translated the request and all my static identifiers are replaced by the name of report internal (something like R12345611212), so my javascript does not work.
  
  Why are the static ID replaced? I have something in the translation rate. In the model of the region, I use the word #REGION_STATIC_ID #.
  < table class = "t101RegionWithTitle" id = "" #REGION_STATIC_ID # "border ="0"cellpadding ="0"cellspacing ="0"Summary =" ">..."
  
  Can anyone help with this problem.
  
  Thank you
  Chrissy

  Either you are using a version prior to version 3.2 APEX and upgrade, either it is a regression from a previous bug: {: identifier of the thread = 720013}

  If it's on APEX 3.2 + then you need to file a bug with Support Oracle report or the attention of the APEX here development team.

  (It's really much easier to help if you include your APEX version in each post).

• Buildin Type 'DBSequence' is not available for the PK in JDev 11.1.1.5 attribute

  Hello
  
  I have JDev 11.1.1.5 and an entity object (migrated).
  
  PK-Atribute is filled into the database using a trigger and a sequence.
  
  I set the attribute to * 'While News Update' * and ' * refresh after insert. "
  
  Now I ste type to + "DBSequence" + as suggested in 4.10.10 how Get Trigger-Assigned to the values of the primary key of a database sequence. But I do not have the entry + 'DBSequence' + in the + 'Type' combobox. +
  
  Even if I remove this attribute of the entity and add it again I am not able to select the build type + 'DBSequence ' +.
  
  How to set the Type of the attribute to "DBSequence"?
  
  Good bye
  DPT

  It is normal (it's newspaper as a bug) check out this thread Re: DBSequence type attribute not available
  It has a workaround solution.

  Timo

• ADT does not not with the large amount of files

  Hello

  I posted a similar question in the Flash Builder forum; It seems that these tools are not intended for something too big. Here's my problem; I have an application that runs on the iPad very well, however I can't seem to be able to package the resource files that it uses, such as flv, jpg, swf, and xml. There are a lot of these files, perhaps to a 1000. This app is not on the AppStore and only used internally in my company. I tried to package using Flash Builder, but he could not do, and so now I tried the adt command line tool. The problem is that it is out of memory:

  Exception in thread "main" means
  at java.util.zip.Deflater.init (Native Method)
  in java.util.zip.Deflater. < init >(Unknown Source)
  at com.adobe.ucf.UCFOutputStream.addFile(UCFOutputStream.java:428)
  at com.adobe.air.ipa.IPAOutputStream.addFile(IPAOutputStream.java:338)
  at com.adobe.ucf.UCFOutputStream.addFile(UCFOutputStream.java:273)
  at com.adobe.ucf.UCFOutputStream.addFile(UCFOutputStream.java:247)
  at com.adobe.air.ADTOutputStream.addFile(ADTOutputStream.java:367)
  at com.adobe.air.ipa.IPAOutputStream.addFile(IPAOutputStream.java:161)
  at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:67)
  at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:163)
  at com.adobe.air.ADT.parseArgsAndGo(ADT.java:504)
  at com.adobe.air.ADT.run(ADT.java:361)
  at com.adobe.air.ADT.main(ADT.java:411)

  I tried to increase the size of a segment of memory from java to 1400 m, but that did not help. What is troubling is well why this day and age, the adt tool is written only for the 32-bit java runtimes, when you can buy is more a 32-bit computer. Almost everything is now 64-bit. Be able to use a 64 bit java runtime would eliminate it.

  Has anyone else had to deal with a large number of files in an application iPad packaging?

  Thank you

  Hello

  Could you post the bug number in the thread?

  We fixed a few bugs OOM AIR 2.7. Here's the blog of liberation: http://blogs.adobe.com/flashplayer/2011/06/adobe-air-2-7-now-available-ios-apps-4x-faster. html . Could you try to package your application and see if it works?

  -Samia