A descriptor of KING in an output file

Similar Questions

• "Extraction failure: cannot open output file" error message when installing new drivers

  Hello, I am trying to install new drivers for my HP Photosmart C4385 printer.  I downloaded the complete drivers of features for Windows XP 32-bit, and when I start to install (extract), I get the error message:

  Extraction failed

  Cannot open output file

  And the process ends.  He arrived at about 85% extraction every time.

  No idea why?  I called HP, but no longer under warranty they wanted money, which I think as absolutely ridiculous - not even give me basic support?  Poor, poor customer service.

  Hi GIJeff12,

  Temporarily disable any AntiVirus/Antispyware software.

  Cut the installer on your desktop then click on the Start Menu, click computer, double-click on the C: drive and paste the installler here.  Now try a right click on the installer for your printer, choose 7-Zip and choose Extract the files, and then click Ok.  If the installation program extracts now correctly, follow these steps.  If it does not extract, let me know.

  Disconnect your printer from the PC.  Restart your PC.

  Open the newly extracted folder and double-click the setup application to start the installation (the installation application will probably have the same icon as the original installation software that you downloaded).  Connect the printer to your computer when you are asked.

  If it was a success, re - enable your security software.

  Best wishes

  DP - K

• I just tried to update Firefox to version 9.0.1. Extract of 13%, and then I got an error message cannot open output file. Can you help me please?

  I just tried to update Firefox to version 9.0.1. Extract of 13%, and then I got the error message cannot open output file.

  The file can be uploaded incorrectly. Could you it redownload again from http://getfirefox.com?

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Match pattern - effectiveness of the descriptor of KING

  In my application, I am followed by objects in an image using the VI 'IMAQ Match model 4' from the Module of vision. Currently, follow-up can not keep up with the rate of acquisition of 60 Hz the camera so I would speed it up.

  My first step was to define a descriptor of KING to find objects only in part (user-defined) image, which reduces the time to follow-up in a frame of 30 ms to 20 ms.

  However, if I instead reduce the size of the image by:

  • defining a return on investment directly in the camera that it returns only the interesting part of the image
  • or by 'manually' copy the KING of the big picture into a smaller temporary in LabView

  follow-up time reduced to ~ 7 ms.

  I was very surprised to see, especially the second stage of cropping the image in LabView and track on the small image is faster than the built-in KING descriptor of the VI «IMAQ Match Pattern 4»

  If Miss me an option or a setting here? Or y at - it an explanation of why I not see this behavior?

  OK what I think is that
  you use the KING for camera in this case that you force ccd to work just to the related KING
  This means resulted in images are small between the start and inside the loop
  It's a mechanical action (or it is better to say that the physical action)
  but in a second you will get full size and makes the smaller image is the piece of your treatment consuming your CPU
  Indeed in the first method, you do not have the image Corp. you just configured camera to make the picture smaller
  but in a second you make image Cup and it is part of your treatment in your PC requires a CPU involving

• How the names of variables and units used in the binary output file

  My colleague will give me LabView generated from the binary files (*.dat). There are more than 60 variables (columns) in the binary output file. I need to know the names of variables and units, which I think he has already configured in LabView. Is there a way for him to produce a file that contains the name of the variable and unity, so that I'll know what contains the binary file? It can create an equivalent ASCII file with a header indicating the name of the variable, but it does not list the units of each variable.

  As you can tell I'm not a user of LabView, so I apologize if this question makes no sense.

  Hi KE,.

  an ASCII (probably the csv format) file is just text - and contains all data (intentially) written to. There is no special function to include units or whatever!

  Your colleague must save the information it records the names and values in the same way...

  (When writing to text files, it could use WriteTextFile, FormatIntoFile, WriteToSpreadsheetFile, WriteBinaryFile even could serve...)

• update the descriptor of King

  Hello

  I am updating the coordinates of the rectangle that is global and countours "coordinated" so that the automatic update will help me a lot by changing return on investment to mask the image to my required location. Could someone show me please the way out of the automatic update of the descriptor of 'KING '. I enclose the static fixed King descriptor so that someone can tell me how these values change automatically according to the coordinates of the previous step...

  Hi Diakité

  Please check the attached capture

  

• several pages scanned in an output file

  I have a 8600 and use the HP scanning software.  I want to do multiple scans and include those in an output file.  If the media keeps me using the auto feed printer, how can I do this?  A scanning software different HP that I had previously used an option that asked if I wanted to add additional pages.  I don't see this option on this software.

  Thank you

  You are welcome

  As I mentioned, it occurs due to memory limitations the software...

  Several pages in higher resolutions of transformation is too important resources for the HP scanning software and therefore unsupported...

• What is a "name of output file?

  Suddenly, if I want to print from a PDF file, box a little "print to a file" appears and asks for the "output file name".  What is c?  I tried to put in the name of the PDF, or the printer info, or just do something.  Nothing works.  What is - this and what he seeks?  I never used to see this.

  Print to a file means it's going to save it to a location such as My Documents, and he wants that tell you it where to save it. These print preferences you need to adjust your printer. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• output file missing error

  windows xp ser pk 3 starts I get missing output file in the dynamic library. Can someone tell me how to fix this problem. I can't find an answer anywhere.

  Something is apparently from Windows and failing. You should know that something is and troubleshoot accordingly.

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• print to a file, output file

  I try to use the 'print to file function', but then he wants an "output file". Should which way I enter here? I tried to enter c:/Users/username/documents / / but it didn't work. Any help? Thank you.

  On Saturday, February 18, 2012 04:17:01 + 0000, AdrianaKennedy-Hogge wrote:

  I try to use the 'print to file function', but then he wants an "output file". Should which way I enter here? I tried to enter c:/Users/username/documents / / but it didn't work. Any help? Thank you.

  Three things are bad on c:/Users/username/documents / /.

  1. these slashes must be the backslashes (change the / to------).

  2. replace the double backslash reverse after the c: with a single slash.

  3. you are him giving a folder name, not a file name. You need
  something like c:\users\myname\documents\myfile.prn give some
  the name of file you want.

  You can name what you want and place it where you want. There
  You like. For example, if you want to put it on a USB stick to take
  on another computer, do so.

  And let me ask you why want to do this. If you want to take this to
  another computer with one different printer than your, notes that the expression
  you print the file, you must use the printer driver for the
  you put it back in the printer.
  Ken Blake, Microsoft MVP

• Just a simple print request gives me the impression of file and application name of output file.

  I am trying to set up a wireless printer samsung on a Linksys router for a Dell with Vista laptop.  When I send a test page it will go not to the printer... He's trying to "print to a file" asking and "Output File Name".  Why?

  Nelia,

  You may find that when you set up the printer first place it has been accidentally manually installed as a "print to file" rather than a printer real itself.

  My suggestion would be to uninstall all samsung software, remove the printer (start, devices and printers, right click on the printer-> remove) and then start again from scratch. Let us know how you go!

  See you soon

• Cannot install some programs-can't create the output file in the AppData\Local\Temp user account

  When I try to install a program (.exe) it works winzip Self-extractor, which attempts to create a file in the directory Users\ (myusername) \AppData\Local\Temp\setup.exe

  I just installed windows 7 and had to happen one or two times before that, I think, but I re-uploaded the file and I tried again and it ended up working. Now when I try to install this program (Hava), he says that it is unable to create the output file.

  When I try to go to this place it doesn't even have the AppData folder I have to first create this path or is it a problem with the program? Any help is appreciated. Touch Pro

  Well, that's possible. As WinZip SFX has a small option to overwrite without confirmation box.

  You can move forward with delete the file setup.exe from the Temp folder in the sound is no longer used by any program (where its in the Temp folder)

  You can also try now is, since its opening a WinZIP Self Extracting Archive, you can try manually, and manually specify where to extract the files before you click ok.

  Once you do this, just run setup.exe from the specified location.

• Ask a "output file name" appears when I try to print

  I am ready to print something and a small box will appear asking you a name of output file, I have no idea what it means. Can you help me please?

  Original title: printer problems

  From Internet Explorer

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I would like to know;

  1. This problem is specific when printing a file in particular?
  2. What is the brand and model of the printer and the computer?
  3. If it works much earlier?

  Please see the advice given by Neeraj S N replied on April 13, 2012.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/unable-to-print-printer-asks-for-output-file-name/97cd3acb-6eea-4c16-9e1f-17343fa21a4f?auth=1

  Let us know if you need more assistance. We will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• Cannot open output file

  Sorry, I continue to post, but I tried to compile a large enough project for the playbook. There is only one problem left, and it doesn't make much sense.

  When compiling, I get this error: C:\bbndk-1.0\host\win32\x86\usr\bin\ntoarm-ld: could not open the output file [ProjectName]: Permission denied

  It is just a normal file. No extension. The thing is that I tried to restart my computer, I tried to locate the file (I guess that's the construction state file since it is the only one like that without extension) and delete, but it does not work. There is nothing with the project, so I don't see why it's happening.

  Any ideas? Thanks and sorry again.

  Well I got it working. I just changed the name to build artifact generation slot C / C++-> settings-> artifact to build.