A 'Draw multiple images in a grid' changed in InDesign CS6?

Similar Questions

• Adding keywords to multiple images

  In the library by selecting multiple images and then adding keywords only adds that keyword in the first image.  What I really need to synchronize these images to get the keyword through all the images?

  Or rather missing me something obvious - someone at - it ideas?

  Matthew

  You must select multiple images in the grid and not in the film for it to work.

• You can change multiple images to a PDF in photoshop?

  I scan a lot of old publications with images and drawings. The images are in black and white, but my scanner produces better results set to color. Therefore, I need to convert images to grayscale in Photoshop for Acrobat. I have several PS actions that facilitate this process, but I would like there was a way to select multiple images in a page or a PDF file and perform actions on them (a lot) instead of one at a time. Are there? Or maybe a method other than what I'm doing?

  I recommend that you scan all first, save it as a TIFF, make any desired correction and only then make PDFs. direct scan to PDF is ideal for simple simple workflows, but a responsibility when the correction is required.

• Where did the installation to print multiple images per page?

  The Panel on the right in the 'Print' module has changed. Previously, the Committee was up and down, 'Image Settings', "Rules, grids, and Guides," 'Cells', 'Page', and "Print Job" with the 'cells' dropdown that gives me the choice of "add to package" where I could easily add and adjust the size of the cells. Now, (I have not downloaded anything) panels has from top to bottom, 'Settings of the Image', 'Layout', 'Guides', 'Page' and "Print Job" and I don't see a way to print several images (either the same of different images) on the same page.

  This should really be in the Lightroom forum!

  However, on the left side of the scree we do not, what are the parameters? They must be defined for a multiple-image document and not as I suspect one presented here.

• When you select multiple images in LR 5.2 on Mac, how delete all photos selected?

  Based on http://forums.Adobe.com/thread/1308132?TSTART=0 I decided to add each question separately:

  Hello, I am very interested in buying Lightroom 5.2. I tried the RC that was missing today. Yet, I have several questions that I can't find really good conclusive answers, I'd like to get an answer before buying LR. Please do not write maybe like this or that (assumptions), because I don't want to start my entire workflow and then realize that I have to change all around, please reply, if you know for sure that something works and you are, preferably, using this method too.

  When you select multiple images in LR 5.2 RC on my Mac, using the film display, how to remove all selected files using a shortcut (as opposed to from the context right click menu > delete selected photos)? Details: To backspace help wonder if I want to remove it, I choose to drive, but he simply deletes individual photos, so if I selected 3, I need to do this 3 times.

  Several operations of selection do not work in Film Strip mode.  You must be in the library to act on several photos grid-Module view.

• When sending multiple images to photoshop camera raw, no images are displayed in photoshop.

  I send multiple images in camera raw to the bridge as part of my work. I make my changes and then select them all and click on the button "open the Images. When I did earlier using Photoshop CS6, all these images open in Photoshop CS6 and be aligned at the top of the window. Now that I have Photoshop CC, when I click on the button 'open image', I'm being transferred to the CC of Photoshop, but some images are open upward. Only a few hours after I downloaded Photoshop CC, Images have been sent there by Camera Raw, but they were sent one by one. I had to finish the job on a single photo, save it, then another of the images I sent Camera RAW would show up. Now, back to Photoshop after a break of 3 hours, I can not camera raw to send images Photoshop CC. I had to go back to my Photoshop CS6 in order to continue work on my assignment. I knew that there will be some changes in CC, but do not think they would be this boring.

  Also, in order to get several images displayed in Filmstrip mode in Camera Raw, apparently I have to send via Bridge. I can't drag and drop a folder into Photoshop CC. Is there a way around this?

  Hi terryleemartin,

  If please check, is your Photoshop and Bridge are updated to the latest version.

  In addition, reset the Photoshop preferences default back so if there is no change in the settings of this problem.

  Reference: Preferences in Photoshop

  Kind regards

  Mohit

• How to make the color of the sky, exactly the same thing in multiple images?

  How to make the color of the sky, exactly the same thing in multiple images?

  Bengt Nyman wrote:

  I'm not trying to replace the sky. I want to talk to a group of photos BIF where the percentages of red, green and blue in the sky varies from a few percent, but enough to disrupt continuity within the group. I like t would be able to use the percentages of color to one of the pictures and replicated in others.

  Because the brightness of the sky probably varies from image to image using percentages RGB will not work. What you can use are the values of a and b the laboratory values . Right-click in the inside of the develop module histogram and tick 'Show Lab Color values.' You can ignore the value of L, which is the value of Luminance or brightness. Adjust the blue sky s a b valueusing the Temp WB and sliders dyed until they are the same as your first reference image file. The value determines the color red/green balance if you use the Tint slider to correct the value. The b value determines the color yellow/blue balance if you use the slider Temp to correct its value.

  Remember that setting the base Panel WB with 'fixed' values of b for photos taken under lighting conditions different sky will be the color of the other objects in the image look incorrect (birds, trees, buildings, etc.). In this case, you will need to use the brush setting to paint in the region of the sky and then use its temperature sliders and tinted to change just the color of the sky.

  To be honest I don't know why you feel it's necessary. Maybe you can post two screenshots: 1) with the sky that they way you want to and 2) an image that you want to resolve to match.

  

• How can I resize multiple images in PSE11?

  I used PSE10 to resize multiple images by selecting the option "Process multiple Images" of the undeneath the drop down "File" menu

  I just migrated to PSE11 and this option is not available - it is greyed out and cannot be selected.

  Anyone got any suggestions? Thank you.

  In PES 11, you must be in Expert mode (the equivalent of change complete in previous versions). Click on the word "Expert" at the top of your screen, and it should be available.

• How can find you an individual image of multiple images on a canvas size

  It's probably something really simple, but I can't for the life of figure me how I can find an individual image of multiple images on a canvas size. for example, I have 3 photos I want to organize 1 large and two others next to him half. How can I change the size of each image on the canvas as when I select the image on a layer sperate, I want to resize it just resizes the entire canvas and not the individual image

  Thank you

  The only method of certain East first resize the images and place them on the backdrop.

• More specific anti-aliasing prevents multiple images rendering at the same time after awhile

  Hi all.

  I am experiencing inconsistent memory, behaviour management when rendering my AE project that prevents me from making several images at the same time when some elements of film use accurate antialiasing.

  I have a processor 8-core i7 MacBook Pro with 8 GB of RAM and I am using AE CS5.5. I visited a project with several Illustrator layers imported to keep things nice and crispy. Here is a 3D with one camera, DOF, composition and they are continuously rasterized. On some of the vector assets I have to set the antialiasing for "More precise" in the dialog box interpret footage to address some problems with image quality. Here's what I noticed when rendering:

  1. when anti-aliasing on all assets of Illustrator is set on "Faster" return it without issues composition.

  2. I change the setting of antialiasing on some assets of the Illustrator to "More specific" to improve the quality of the image. Made of several images at the same time is off. Composition makes for a while, but eventually I get an error: "after effects error: unable to allocate enough memory for file antialias (50:5).

  3. to work around the error I load AE to empty the memory cache all 5 images or less via the Secret menu in the preferences. This prevents the error from happening and I can see the RAM being deallocated when from time to time as expected. This allows me to return the quality I need, but it is slower.

  4. in order to expedite things I light made simultaneous multiple images. I use the conservative settings: AE is to use only two hearts with 3 GB of RAM by heart (the maximum allowed). The rendering is accelerated. However, I see that the system "in use" RAM continues to increase at each image made up until the computer runs out, how AE automatically turns off made simultaneous multiple images and begins to display one image at a time. This does not happen whe all vector assets are defined to use fast antialiasing one I can make indefinitely with simultaneous multiple images rendering, but I don't get this way the desired quality. Please note that there is enough RAM for the carrots for multiple images rendering, but it seems as if having made a frame, the system is not free or reuse the memory when assets use specific anti-aliasing and will use another piece until there is no more.

  Also, I'm outputing to a sequence of images.

  Please help me to find a workaround for this problem. Thank you!

  This is probably a software design limitation (or bug) in the underlying code of Illustrator and there is no work around for this. You might dutifully report it here, but it's as good as it gets, and even when you do, you shouldn't be pregnant it be fixed anytime soon. In 12 years of use AE, that kind of thing never worked 100% right...

  Mylenium

• Animate multiple images at the same time

  I use Photoshop CS5 Extended. I did successfully interpolation when I did only a single object on a layer, but when I want to move more than one object, it does not work.

  Example:

  I have a layer with an object (say, a circle), it is frame one. I copy this image in the animation window. In the second frame, I move the circle. I tween these two frames and everything works fine.

  If I have TWO circles on a single layer, the one frame. I copy this image. In the second frame, I move one or both, circles and it changes circles in the first image as well. Thus, interpolation will not work.

  Is it possible to have multiple images Animate at the same time? So instead of one circle movement from left to right, I could also have a circle moving from top to bottom at the same time? Perhaps executives piled as a timeline? Any ideas?

  Thanks in advance.

  If I have TWO circles on a single layer,

  Not like that. They must be each on separate layers and more, animate you in 'bar' mode and only convert to executives at a later stage (in the interest of efficiency).

  Mylenium

• Lock frame span when editing multiple images?

  I am referring to the duration of the selected images in mode «Edit multiple images»

  (I have attached a picture of the thing I'm talking about).

  When I edit several images, multiple frame span"cursor"(?) follows me always around whenever I select a new image in the timeline.

  Is there a way to lock in place or prevent him from every time that a new framework is selected evolving?

  I think you are looking for the option 'onion of the anchor. Go to the menu/button directly to the right of the button Edit several images, then choose "Anchor onion" in the menu that appears. Who will keep the change of several stick markers in the same place.

  Hope that helps,

  Jen.

• Multiple images with the same file name no doubt prevent export

  iMac running OS X El Capitan v10.11.6; Photos 1.5

  I'm trying to export approximately 331 images and I get an error report saying that only 169 of the exported images due to the inability to create files for 159 of the images.  Then the report gives me the names of files of the first 100 images for which files were not created.  After looking at many images that would not create a file, I realized that, in any case, there was at least one, if not several, other images with the SAME EXACT FILE name as the image in question.  I can't change the names of files by right click on "info".  I tried to export the images and change the names of files to export using the sequential option and the option of album name - always having exactly the same problem.  I even tried not to export an image at once and change the name of the file individually or no available. Is there a work around that? I desperately need to export those specific images. I am trying to create a photo album for shown to mothers who choose a family with which you want to place their child/ren for adoption. I'm at my wit's end.  The kicker is I'm moving towards trying to export all my pictures, and that's going to be a HUGE problem in course for me, so I really hope that there is a way around this question somewhat simply. I am a hobby photographer and use the computer for businesses and crafts.  I've seen a few posts that included answers referencing "AppleScript" - I have no idea how to do something like that.

  From here on I will DEFINITELY ensure that my Canon continually numbers the names of image files and automatically resets.  For the other photos other than Canon, is possible to rename images during the import of the lot?

  All advice and help will be GREATLY appreciated!

  Finder has the ability to rename files with various models of lot.  Simply select all the files to rename, right-click one of the selected files, choose 'Rename X points... '. ", and then set the options and click on the button"Rename ".

• "Save Image under" continues to change directories

  "Save Image under" continues to change the location, it saves the file. As I go through the different pages and save some images, I noticed that sometimes it saves where I expect to, (the location that I recently selected when saving an image), but very often in the same session (which means that I've not closed and restarted FF), he decided to change the location of a directory that I used earlier , at the place where this has saved the previous file.

  I thought it would be something like a scenario, I opened 1-5 tabs, save images to A location. Then I save a file at location B, open 6 to 10 pages, save a file to the location a new. At this point, I expect that my files by default to A location, but perhaps pages 6 to 10 are now held B that are associated with them and they will default it there instead. I just test that and this isn't.

  It is also not extension (.jpg, .gif) that forces the change of location. I can't understand what triggers it.

  Does anyone know if there is another topic: config that we can change, (which replaces no doubt the next FF update in 5 minutes) to restore the appropriate behavior?

  This behavior started with the upgrade to 7 FF.

  
  

• VBAI acquire multiple images

  Hello

  We work with VBAI 2012 and we want to acquire multiple images as quickly as possible one after another to decide what is best for the inspection. Is it possible to take for example 5 images one after the other, or what I call the image to acquire five times?

  Thank you

  Oliver

  Why not continuous use to acquire images and use 5 as the number of buffers required?