A few questions during the consideration of the unique and professional license

Similar Questions

• I have a few questions about the internet and partition recovery

  I deleted completely OS X Yosemite and only left Windows. Now that I'm pretty sick of Windows and want to use my Macbook Air for real, I am using recovery of the internet (order and R) to reinstall OS X.

  I backed up all my data and that you haven't stored anything in my Macbook. My questions are: (I know they are long, but they are quick to respond)

  1. I want to erase everthing on my Mac. I have now 3 partitions. After starting and pressing command + R, I would use disk utility to erase everything, like this .

  After you click Delete, would be merged my 3 partitions in 1 and I could repartition my Mac?
  

  2. I want to create a partition for OS X Yosemite (and possibly upgrade to El Capitan). What is the minimum recommended size for partition OS X Yosemite? (Because my SSD is only 128 GB)

  3. Let's say I create 3 partitions, let's name A for OS X, B for my data and C for reinstalling Windows. If I boot into Windows, I'd be able to use (read and modify) data on B, or just OS X could do that?
  

  4 the amount of data I should download during the recuperation of the Internet? I guess that much since I'm downloading the OS X package, but my internet is quite slow, so I want to know how of SGB I have to download.

  5 If I asks me to enter the Apple ID to download OS X, would any book Apple ID?
  

  Thanks for reading. I would be extremely grateful if you answer my questions. See you soon

  • 0: have backups of everything that you care and disconnect external drives except those you use specifically.  While he isn't supposed to, repartitioning should always be supposed to cause a total loss of data.  Corruptions can and do happen sometimes, unfortunately.  Stray user commands can sometimes target bad drives for erasure or repartitioning, because errors can happen.  Do not connect anything unnecessarily.
  • 1: Yes.  You want to create a volume of GPT partitions.
  • 2: let Yosemite size and add his own scores.
  • 3: using Boot Camp to add the Windows partition.  With a small that disk, I might well Park out Windows on an external storage device, or use a virtual machine, and Windows as a guest.   In general, add additional user-defined partitions are not general, something I recommend.  Resizing and adding and removing partitions can meet with corruptions, provide for backups.
  • 4: depends on various factors, including least aren't servers from Apple how busy are, and how fast your network link is.  I have used to create a local installer and use it.   That fact also resumed and other operations more quickly, at the price of a few $ for a drive of sufficient size.  Recent versions of OS X are ~ 6 gigabytes in size, based on installers the.
  • 5: any Apple ID will work, but having more than one active Apple for OS and app ID buy usually leads to disputes to find out who bought what and who can update what.

• A few questions about the defrag and hard space as I get a notification saying my hard disk space became full of drive

  I have problems with my hard drive. I got a notification saying that my hard disk space became full. So I cleaned a lot of programs and files of the irrational. I've freed almost half of it. Then I had another notification a few days later and realized that I had less than 1 GB of free space on my hard drive 600 g. I cleaned more and went to defragment my disk. It is set on a calendar, but I don't think that he has never been defragmented. He ran for about 2.5 days until the cord is unplugged and the battery is dead at 91% consolidated. Do I have to start again and wait again 2.5 days before I little hard drive space open? Or progress in the early days of 2.5 will remain défragmentée? In addition, defrag and do a disk cleanup will stop my hard drive to fill almost instantly after deleting and uninstalling programs? I'm running out of things to remove and I am a full-time student full and really need a computer in operation, please help!

  Defragmentation is complete, will continue from the left point last time. Therefore, if you raise, he will continue that 91 percent (of course, it will start from 0%, but the scan will go up that 91% and continue with the rest of the space on the hard disk, that 91% of surface of the hard drive has been defragmented already).

  Yes, you can delete all the files inside the Temp folder. TEMP folder is a temporary storage place used by some programs to temporarily store the files/folders. Some programs remove the files/folders after working, but some retain them, causing space problems.

  You can use disk cleanup, on occasion, to delete unnecessary files from the hard drive.

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Questions about the terms and conditions

  Dear team of Adobe Stock,

  I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

  3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

  What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

  Thank you

  Hello

  Please see the link below for help:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

• Question about the interruptions and priming

  Hello

  I had a few questions about the startup and interruptions in a virtualized environment

  Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Thanks in advance

  -SC

  sidc7 wrote:

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

  It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

  There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

  sidc7 wrote:

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.

• Recently bought a laptop computer; A few questions about the offer Upgrade to Windows 8

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
  Thank you very much!

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?

   

  Yes, the registration period is between June 2, 2012 to January 31, 2013.

  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?

   

  Yes, the Upgrade Wizard of Windows 8 will allow you to create a bootable DVD or you can grab the ESD file and save it.

  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.

   

  Yes and there are better ways to reinstall Windows 8 without using the installation disc, you can use the reset and refresh.

   

   

  These steps will take you through refreshing your PC:

  · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · Under refresh your PC without affecting your files, click Start

  Then follow the instructions that will be provided on-screen to cool your PC.

  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
   
  As long as you have a recovery disk which you should create or use the construction in the recovery partition, Yes, it will self activate.
  Thank you very much!

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• I have a few questions on the Adobe CC Bill.

  I have a few questions on the Adobe CC Bill.

  
  

  Now I use the new package 240 Baht/month, but on my Bill have a times.300 list 2 and 240 baht (detail in attachment)

  Clouds please check and comment me.

  Thank you for your kind support

  
  

  Peerawat S.

  
  

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• Hello, I have a few questions about the affiliation of creative cloud

  Hallo,

  I have a few questions about the affiliation of creative cloud:

  1. There is an Adobe offer up to 27.11. : the price offered is 47.59 euros per month including MWSt (VAT) or €568,20 / year.

  For what is this offer period/how many years valid?

  2. after the period of the offer, the membership will cost the standard-price: €59,49 / month or €713,86 / year (seen on the Adobe Web site).

  For how many years this standard - the price is fixed?

  Is the standard-prices include MWSt. (VAT) too?

  Thank you

  Thomas

  Hello

  I advise you to contact Adobe sales for queries on pricing.

  Contact us | Adobe

  Kind regards

  Sheena

• A few questions of the benchmarking Guide.

  Hi people,

  I now use ESX 5.1

  I have a few questions about the VMmark test!

  1.

  Disk space for VM is important?

  Because I found the client model.

  Space is limited, after that I installed the cygwin

  I use Windows 2008, the default 32 GB is not enough

  Same thing happened the day before VM

  The default space is not enough after Windows Update

  2.

  When we asked him to specify the size of the virtual disk and provisioning policy, enter either 15 GB (for you will be

  using Windows Server 2003) or 32 GB (because you are using Windows Server 2008), let the floppy

  Uncontrolled Provisioningoptions

  For this configuration to disk, I have to choose one of the three methods, I can't uncheckd

  Only that I should check?

  

  Is there any document with pictures of installation to follow?

  Thank you very much...

  Alvin

  The script automatically uncomment all lines, as for example the kern.srv.cleanup_threads, cygserver.conf values 2.

  In the files that you have shown, the values were already décommentés so there is no change. Your cygserver.conf is correct.

• a few questions about the migration of content/web content

  Hi all
  
  
  I have a few questions about the migration of the website and content (from development to test) which are not specified after reading the oracle documentation.
  
  -> When we make the site replication will be migrated content (data files).
  
  -> when we move will contained all the ED and RD etc (any object type web site migrated).
  
  --> are the two the necessary step for migration when we migrate web site.
  
  
  Thank you
  
  -Yves

  --> When we make the site replication of the content will be migrated (data files).

  It depends on how you do it. The tool 'Site Studio Replicator' won't move any content, only the structure of the site. The 'Manage replication Site' page can be used to migrate content with the structure of the site but I do not recommend for large sites, I use separate tasks to archive to move the content. "Backup and restore" page stores the entire site in a ZIP file, not advisable for large sites.

  --> When migrate us content will be all ED and RD etc (any object type web site migrated).

  Yes. It uses the metadata xWebsites field to identify the elements that belong to the site.

  --> are the two the necessary step for migration when we migrate web site.

  Depends on how you do it, but yes, all bits are needed.

• A few Questions about the advanced Actions window

  Hello

  I have a few questions about the progress of the Actions (using the version of track CP7)

  1. What is the function of the action to "continue?"   Out of the peak action and advance the playback cursor?

  2. What does mean this comment "Nested calls to action advanced is a nice improvement."? Is the advanced decision at the top of a page of action tabs?

  3. What is the function of the option "custom" in the IF statement - "preform action if - custom", it doesn't seem to do anything for me?

  4. where can I get information about the timeline / playhead interaction with advanced actions, i.e. where the playhead is going again at the beginning of the slide. slide custom question - display button, e.g. verification of responses, comments - when all the objects are at the beginning of the timeline. I'm looking more for the read head of infromation functionality rather than how to implement this type of question.

  Thank you

  Donal.

  Continue: If an advanced standard action is triggered by a button, this will not trigger the playback head. If you want out, you can use continues. Continue can also be a choice in a conditional action, when one orders branching has nothing to special, but in advance. Continuous is also the "dummy" statement/command (this is the official name of a line in the dialog box advanced actions) If a statement has become unusable due to some reasons, it will be replaced by continue

  There is no nested call stocks advanced possible right now, one of my many feature requests. It would be sort of a subroutine that you can use over and over again, instead of having to create each time when necessary.

  A decision is one of the conditions to be an advanced conditional action. They allow to create more complex actions, as a loop or arrays are not possible. All decisions are executed in sequence and always.

  Custom: is a combination of or but it is rather limited, because you cannot use parentheses.

  I guess you'd better visit my blog if you want to learn more about the advanced actions.

  http://blog.lilybiri.com/

  I also did several Webinars on stocks advanced, last this afternoon (on the sharing of the actions) for Adobe. They are all available on request.

  Lilybiri

• A few questions regarding the audit

  Hi all
  
  
  
  Greetings. I have a few questions regarding the audit.
  
  
  1. how to enable auditing for create table and truncate table by a user?
  
  

  SQL> audit table by schema_name;
  
  Audit succeeded.

  Fact the knowledge of the above: http://psoug.org/reference/auditing.html
  
  This succeeded. But when I actually created a table, it does not reflect in the dba_audit_trail;
  
  
  Do I have to use the number of action by and then combine it with another table to populate the create table/truncate table?
  
  
  2. How can I check what all auditing has been activated so far?
  
  
  Please suggest me. I am unable to follow the audit to create and truncate.
  
  
  Concerning
  KK

  In the above article that I mentioned earlier it said check the dba_audit_trail table.

  COLUMN username FORMAT A10
  COLUMN owner    FORMAT A10
  COLUMN obj_name FORMAT A10
  COLUMN extended_timestamp FORMAT A35
  
  SELECT username,
         extended_timestamp,
         owner,
         obj_name,
         action_name
  FROM   dba_audit_trail
  WHERE  owner = 'AUDIT_TEST'
  ORDER BY timestamp;
  
  USERNAME   EXTENDED_TIMESTAMP                  OWNER      OBJ_NAME   ACTION_NAME
  ---------- ----------------------------------- ---------- ---------- ----------------------------
  AUDIT_TEST 16-FEB-2006 14:16:55.435000 +00:00  AUDIT_TEST TEST_TAB   CREATE TABLE
  AUDIT_TEST 16-FEB-2006 14:16:55.514000 +00:00  AUDIT_TEST TEST_TAB   INSERT
  AUDIT_TEST 16-FEB-2006 14:16:55.545000 +00:00  AUDIT_TEST TEST_TAB   UPDATE
  AUDIT_TEST 16-FEB-2006 14:16:55.592000 +00:00  AUDIT_TEST TEST_TAB   SELECT
  AUDIT_TEST 16-FEB-2006 14:16:55.670000 +00:00  AUDIT_TEST TEST_TAB   DELETE
  AUDIT_TEST 16-FEB-2006 14:17:00.045000 +00:00  AUDIT_TEST TEST_TAB   DROP TABLE
  
  6 rows selected.
  
  SQL>
  

  Have you reviewed this table?

  Alternatively, you can consult the table of dba_stmt_audit_opts.
  DBA_STMT_AUDIT_OPTS

  Published by: Kerri_Robberts on July 15, 2011 15:11

• A few Questions about the creative cloud

  I read that the Creator Cloud connection will be released in the coming weeks, which is great. I have a few questions about the download file and the creative connection program of cloud.

  I have a file which I will download. The contents of this file will be updated periodically locally. I want to do the files in this folder to stay updated between my desktop and laptop. The Creative Cloud connection program will be able to do?

  If a file is changed, which is already in the cloud program will recognize the change and stay the cloud?

  I guess just a little more information on exactly what will be the program Creative Connection cloud would be nice.

  On the topic of storage I will be able to upgrade the standard 20 GB of storage that is available when / if needed? And how much will that be?

  Another question:

  When Lightroom 4 will be available via CC and why is it not available when it was released?

  Creative Cloud connection will keep files between your desktop and the Web site synchronized. You will be able to add, edit and delete files from each end and that the changes are reflected in both.

  To see the connection creative cloud in action, you can watch this video of evangelist Paul Trani Adobe http://tv.adobe.com/watch/adobe-creative-suite-6-creative-cloud-launch-week/adobe-creative - cloud - tour-/.

  There will be a way to get more than 20 GB of storage. Adobe Creative Cloud http://www.adobe.com/products/creativecloud/faq.html FAQ has a question and an answer about it down:

  Buy extra creative Cloud storage?

  Additional storage will be available for purchase later in 2012. If you have reached your storage limit, contact Adobe Customer Service.

  Lightroom 4 will be available in a few weeks. Jeff Veen also tweeted this https://twitter.com/#! / veen/status/200810541550288896. Other Articles of Jeff on what comes to the Adobe Creative cloud here in his blog of Adobe http://blogs.adobe.com/creativecloud/coming-soon-to-creative-cloud/.