A few questions that probs make me look like an idiot!

Hello.

I used Photoshop for 13 years and has recently made the leap to Illustrator, and there were a few things bugging me. I use "my way" to solve them, but I'm sure that I'm doing it wrong, and it is much much too much time...

I'll have to use images to describe what I'm trying to say, so let's use my origami frog...

http://img689.imageshack.us/img689/9022/7dj5.png

Right, here it is...

Now, I've read that all roads should be closed before sending to clients / impression etc... In my next photo, how you intended to close the path highlighted yellow? (And other similar used like retailer lines on the faces for example, because they are just a single line and cannot join their starting point)

Also, where I'm pointing red arrow... How can I do that triangular a different color of the article? Since the leg as a whole is the joined path, all these thinner strokes inside the leg are paths of the singular, open, as you can see by the yellow highlight... Am I supposed to 'outline' legs in the forms of small triangles? Because this seems very unprofessional, and I can't imagine it being boring and a lot of time with lines curves complex. So I must be missing something obvious.

http://img443.imageshack.us/img443/3927/0782.png

^ Also, as you can see by the blue arrow, is not ending up with the angle of the leg. Is it impossible, because it is only based on the width of the line? Because close up you can see its not very tidy.

And finally... Can I use the plan less first Pathfinder tool on the coat of arms (yellow outline) the forest hidden rough edge behind the body layer, because once again, when you hover over the arm, it seems wrong again... But if I had less before bit hidden behind the layer of body to the line up carefully the outline of the body, once again, if the race of the body is thinner than the arms race, then the arms race would show beyond the edge of the line body giving the horrible yet?

http://img96.imageshack.us/img96/7792/xoia.png

This program can be very confusing. I hope someone can understand what I'm trying to say.

Thank you.

Shaun.

Cross validation, carano (a risk of leaving during the response).

Nice to see that it was settled.

Describing the stroke of the brain and less first plan will give you the ends that depend on the direction of the high path of the page by the cuts made (small fertilizer or curved segments that can be different angles), then the path opened as a result of a scissor cut will be just ends in accordance with your race > adjustment Cap.

Tags: Illustrator

Similar Questions

  • my internal microphone makes me look like a robot.

    I have an inspiron 1525.After using Skype, I found that my internal microphone makes me look like a robot.  I then used a recorder on my computer to record the voice of Skype anti-capitalist and found the same problem. What's wrong?

    Hi Yonasan AkivaBen Avraham

    I suggest you try uninstalling and reinstalling the audio drivers. Follow the steps to check the audio drivers in Device Manager:

    a. click Startand then click Control Panel.

    b. click system and Maintenance, click Systemand then click on Device Manager.
    Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
    If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    c. in Device Manager, expand sound, video and game controllers. Now you can right click on the listed audio driver. Here, you will get all the option to update or install/uninstall the drivers. Click Uninstall.
    Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

    d. restart the computer. This will allow the computer automatically detects drivers for devices on the computer restarts.

    Check out the link below to update the drivers and check.
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    If the problem persists you can also consult the link below and check-

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

     

    I hope this helps.

  • A few questions that I need some help to answer to. (Sony Xperia z5 Premium)

    Greetings from Norway!

    Just bought a Sony Xperia z5 Premium, coming from a LG G3. (What is a fantastic phone)

    I'm enjoying my first Sony phone (I had HTC, Samsung, LG), and I'm liking it a lot.
    But I have a few questions.

    How to pass the soft keys around so that the previous button is on the right side of the phone? If this isn't a feature, it must certainly be.

    How can I activate vibrating it on the keyboard when I press a letter?

    So far, that's all I had. I don't know that I'll have more questions, more I use the phone.

    Thanks in advance.

    -Voltagetweak

    Related to the keys, it is not possible by default switching. You could look for a 3rd party launcher.

    And on the vibration press button activation, go to language settings and keyboard input-xperia rational and entry.

  • How to make Firefox look like Chrome?

    Is there anyway to make Firefox 29 back to the old layout?

    I chose to use Firefox because I loved the presentation of the user interface, and it doesn't look like Chrome. In this new update I may as well pass because they look almost identical. It's really disturbing to me, I like Firefox and this new Interface looks really bad for me.

    Can't we just updates that improve the code and the quality of life issues without being constrained by using a browser that is a clone of Chrome 1:1?

    -Smoot

    I went to the Pale Moon browser today. Because Firefox has been open source and there are clones available. Pale Moon is literally everything that Firefox has been (down to each individual option) before Mozilla decided to break their own product and replace it with Google Chrome 29.

    Look the same, works the same, will not be updated and break all the time. Congratulations to all.

    www.Palemoon.org

  • How can I make it look like the one on the mozilla site?

    On the Mozilla site and "Getting started" video, the browser has a round look with a "Firefox" tab on top. I just installed it and it looks quite like this. Actually, looks like IE (Internet Explorer) which makes very difficult customization.

    View > toolbars-> = Menu bar click on this menu item so that the check mark disappears

  • How can I make Firefox look like the new toolbar update?

    I installed Firefox 4 to a new computer running Windows XP, but I still have the old look and layout of Firefox. I want to use the new look with all in a drop down menu bar.

    It is a new installation of Firefox 4 with no previous version installed. Here is what mine looks like.

    See image: http://i52.tinypic.com/1532y4h.jpg

    Right-click on the Menu bar and click to deselect the menu bar.

  • I am running a skin on my Windows XP to make it look like Windows 7. Is this legal?

    I use SevenMizer 1.2 on my Windows XP system. These skins are legal?

    As long as you have a legal copy of Windows XP and it does not change the file system, you are correct probabally. If it's just changes the appearance to look like Windows 7.

    However, you should read the EULA to be sure.

  • 6.0 interface is confusing; How can I make it look like the previous one?

    How can I cause the tabs and buttons to be where they were on older versions? I tried to get used to the 'new' interface, but I spend so much time looking for things that I used to know exactly where they are. How can I get the old version back, or how I can cause it to put things where they are supposed to be?
    The feet must be on the bottom, just above the display of the web page. And what happened to the little arrow on the back button that would allow me to return to the previous page? And why the hell did you put the 'Cancel' button where it is? No sense to me.
    Gimme back the old interface.
    Or if I should abandon Firefox?
    Jan Smith

    The arrow to open the history tab of the previous buttons and following was removed in Firefox 4 and later versions.

    Use one of the following methods to open the tab history list:

    • Right-click on the back or next button
    • Press and hold the left button of the mouse on the active back or forward button until the list opens

    You can watch this extension:

  • How to make Vista look like XP

    Help, please!

    I like the look of XP, I had 4 years but I have upgraded to Vista and I want to watch her back

    Hello

    You can get closer to the functioning of XP but not identical.

    • Right-click on an empty part of the desktop, and then click Customize
    • Click the link for the theme
    • In the drop-down list, select Windows Classic
    • Click OK
    • Right-click on an empty part of the taskbar, and then click Properties
    • Click the Start Menu tab
    • Click to select the classic Start Menu
    • Click OK
    • Click on the Start button and open computer (click it)
    • Click Tools and then click Folder Options...
    • Click to select the use Windows classic folders
    • Click OK

    After that, if there are other adjustments you want, do us know what they are and we might be able to help others.

    Tricky

  • How to paste images and make them look like they belong

    I've been messing around with photoshop for a few weeks. I'm trying to find a way to copy and paste a person (or object) in another image and do seems like it belongs. Is not like you just copy - paste! Any help?

    image.jpeg

    Hey Kevin,

    Please check the tutorial below.

    How to merge photos with realism in tutorial Photoshop CS6 - YouTube

    Let us know if that helps.

    Kind regards

    ~ Mohit

  • What is my folder of the application that is supposed to look like?

    Im not sure of what was originally in my app folder. I would delete that I don't have here in it. Can someone help me?

    like the games in Trion who is supposed to be here?

    What is SyphonInject?

    What is log files?

    Help, please!

    The three programs that you named are not the default applications, you can get rid of them, if you do not want them.

    This page lists all the default applications included with the Mavericks, so you can reference to see what you don't need.

  • I am doing a logo, I just want the circle logo and won't export to make it look like a square... I don't want the extra pixels and I am a beginner... Can someone help me? What should I do?

    Capture.PNGaaa.PNGAs you can see I'm doing an audio spectrum, reacting to the music but I can't insert my logo without extra white borders for the logo... I want just the Black logo (unbroken Records). I need help I try to export to PNG SEQUENCE, but still does not work... Always comes and I followed this guy tutoring how did his circle just logo in shape without the border... or square shape size... [Adobe After Effects Tutorial] - trap Nation Audio Visualizer - YouTube Thanks in ADVANCE!

    Yes... a circle mask.  Or you could open the .jpg in Photoshop, remove 'white party' and re - save as a .png.

    That's what the guy who made the video uses.  It uses a .png.  You use a jpeg file.

  • How to make you look like a dwarf

    I guess you can do that in real life, but how would you more to do sequels? Any advice or good tutorials I watch? Thank you

    You would simply measure the layer / until you seem tiny. Whatever it is, for this kind of things, success is to properly plan the shooting to match lighting and view 2 different scenes, not so much in the post production process...

    Mylenium

  • make it look like it has a slider for a link

    How can I make this switch to a normal cursor for a link?

    < police = "Helvetica" onclick = "MM_swapImage ('greyjpg',", ' Images/greytaper.jpg', 0) ' MM_swapImgRestore "> < u > new

    conical configuration for the same price. < br >

    < /u > < / make >

    The action of works as expected, but the cursor does not change.

    Thank you

    Use the property style of cursor:

    New

    conical configuration for the same price.

    best,

    Shocker

  • Re: A few questions about the Satellite L300 - 145 (PSLB0E)

    Hello

    I have a few questions that make me go nuts.

    1 - this laptop what chipset is actually uses? GL960 and GM965? Since it has 2 GB max ram I would say GL960, but that one is capped at 533 mhz and 667 mhz are the Rams came with the laptop. Also the name of drivers chipset gm965, said, I don't know if it's the name for the entire group of chipsets or if it's really a GM965. And also GL960 has no integrated graphics, but this laptop only, and GM965 has an integrated graphics card.
    to prove that I do things to the top you go here:
    [https://ark.intel.com/products/29830 | https://ark.intel.com/products/29830] GL960
    [https://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller | https://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller] GM965

    2 - if it's a GM965 why the computer only suports laptop 2 GB ram max, while officially the suports 4 GB chipset?

    3 - Why is there not a page on the website of toshiba (al less in the Web site code) which tells me the full specifications for this laptop, as if there is a page for others more recommended laptops?

    Post edited by: Kailido

    Your phone has Mobile Intel GL960 Express Chipset inside and can handle with 2 GB of RAM only and you can use the monitoring modules:
    1 GB-DDR2-667-PA3512U-1M1G
    2 GB DDR2-667-PA3513U-1M2G

    Unfortunately I can't answer your last question. This question is for Toshiba directly.

Maybe you are looking for

  • B1H40EA #UUW: cannot install Windows 10 USB and Windows 7 online

    Presario CQ57-400SO. I can't install Windows 10 from both usb and online.i once finished the installation process of void and he returned my system to the old program Windows 7

  • whether you're better HP DV2000 HP Tx1000

    whether you're better HP DV2000 HP Tx1000

  • Windows 7 language packs

    Where can I download Windows 7 language packs?

  • WRT54G2 - problems only in AP mode

    I have a new WRT54G2 I would use just like an access point wireless, allowing routing to my existing cable modem/router. My private network IP is 10.1.10. * to set up, I have an ethernet cable connecting port of my laptop to one of the ports numbered

  • ThinkVantage Toolbox download

    Hey guys,. I am very attached to the ThinkVantage Toolbox, Thinkpads were up to some time ago. I really like the software and this is one software that always install when I clean install Windows on my ThinkPad. Recently I discovered this old version