A few technical issues

Similar Questions

• HP Pavilion a1777c: a few Driver issues Pavilion a1777c

  Gentlemen.
  
  I am looking for Vista drivers for an a1777c flag. I noticed on the driver download page for this model that some of the downloads are available in 32-bit or 64-bit. The drop-down list lists only 'Vista' with no designations of 32 or 64-bit operating system. Does it matter that few of note from the original installation media for HP used? I currently have a 32 bit Vista disc so I can use that even if the original version of HP was 64-bit? I know I can't use 64-bit with a 32-bit installation drivers, I wonder if it's important, if I install the same bit-version of Vista computer comes with.
  
  I don't see the drivers for chipset on the driver download page. Traditionally, this is is the first set of drivers that you install. I see an update of the bios, an update to the Intel® Viiv™ software and drivers for an Intel Matrix Storage Manager, but that's as close as something seems to come for the chipset drivers. The driver download page actually has all the necessary or I have to go to ASUS (who made the motherboard P5LP - THE) for the actual chipset drivers? If the latter, I do not know why these drivers would not appear on the HP driver download page, or at least a rating and the link to go directly to ASUS.
  
  Also, I noticed an update for Roxio Creator Application. Given that I don't have the original installation material would be a waste of time trying to install this software? I installed the drivers for another HP computer which has had an update to Roxio and the update would not move because he could not find any earlier version to update. Same thing here?
  
  Your interest is appreciated!
  
  Grant

  Hello, concession.

  GHagen wrote:
  

  Gentlemen.
  
  I am looking for Vista drivers for an a1777c flag. I noticed on the driver download page for this model that some of the downloads are available in 32-bit or 64-bit. The drop-down list lists only 'Vista' with no designations of 32 or 64-bit operating system. Does it matter that few of note from the original installation media for HP used? I currently have a 32 bit Vista disc so I can use that even if the original version of HP was 64-bit? I know I can't use 64-bit with a 32-bit installation drivers, I wonder if it's important, if I install the same bit-version of Vista computer comes with.  The best way to determine if the driver is working is to try to install it.  If it's not compatible it will simply say so.  There are 32-bit come running on an operating system 64-bit.  An example of this is Adobe Flash Player.  I had to run the 32-bit version several times.
  
  I don't see the drivers for chipset on the driver download page. Traditionally, this is is the first set of drivers that you install.  You are right.  There is no Chipset driver for 945G chipset.  I even tried the Intel site, and they do not show one for Vista.

  I see an update of the bios, an update to the Intel® Viiv™ software and drivers for an Intel Matrix Storage Manager, but that's as close as something seems to come for the chipset drivers.  If you try to install the BIOS update, please be extremely cautious.  An update of the BIOS has failed is the best way I know to create a good boat anchor.

  The driver download page actually has all the necessary or I have to go to ASUS (who made the motherboard P5LP - THE) for the actual chipset drivers?  Motherboards HP and BIOS' are being owners, they are not the same as the retail version of the mobe even.  You can use drivers that are developed by HP in most cases.

  If the latter, I do not know why these drivers would not appear on the HP driver download page, or at least a rating and the link to go directly to ASUS.
  

  
  Also, I noticed an update for Roxio Creator Application. Given that I don't have the original installation material would be a waste of time trying to install this software? I installed the drivers for another HP computer which has had an update to Roxio and the update would not move because he could not find any earlier version to update. Same thing here?  You can do a test to see what happens.  I know that a lot of apps that is posted as updates are in fact to be a complete application.  In the last upgrade Windows versions were full versions, but do not appear as such.
  
  Your interest is appreciated!
  
  Grant

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• A few SEO issues: Alt = "" text names and file/folder. "

  I read about the Dark Art of SEO, and frankly, that a large part of it is more confused than I expected.  In any case, I will summarize here. I read that:

  The file/folder names are better with words and hyphenated words.  then DCM000123.jpg in a folder named galimg would be better as: /gallery-images/painting-title-here.jpg

  ALT = "" text can add to the content of your pages. "

  My thought on this door on a site of the Gallery I built with about 200 individual paintings in it.  So, the site has a lot of content but not a lot of text.  I wonder if I should start trawling through it all, to change the names of files and folders and add alt = "" text more usefully help with SEO? "

  So if my thinking is OK, here are the questions.

  How would you put the alt = "" text on individual images? "  I guess that it should simply be a direct description, this who-you see?  But there are a few other options.  Suppose I have an image that the artist titled, 'Cattle on a Hill', and it is an oil on canvas.  I could do that

  ALT = "" oil on canvas: cattle on a hill "or"

  ALT = "Cattle on a hill" or

  ALT = "a group of cows grazing in pastures under the light of the moon." or

  Suppose that I have 20 images in a gallery of portraits:

  ALT = "Portrait.  "Oil on canvas: Joe Bloggs ' or

  ALT = "Portrait.  Joe Bloggs' or

  ALT = "Man with the gray hair, wearing a blue shirt, sitting on a bench" or

  ALT = "Portrait painting.  Oil on canvas. "Joe Bloggs: wearing a blue shirt, gray-haired man, sitting on a bench.

  The second part of the question also includes the problem that if I have 20 images in a single gallery page and I put 'Painting of Portrait' in every alt = "" text is that it will look like keyword stuffing? "

  Now on the thing of file name.  File names are portrait-painting-01 and so on or does it cattle - on the slopes or what?

  Last question: I do too much of this?

  Thank you

  Martin

  the site owner does not have legends... I just want to do the best that I can do better in the search engines for its site.

  Ok.  Use the title attribute.

  http://www.w3.org/TR/html401/struct/global.html#ADEF-title

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• A few layout issues

  Hi guys

  There are a few changes, I want to make the page layout:

  1. I have a HBox top flex I want not stuck up when the user scrolls down.

  2. whenever a component requires the user to scroll, I noticed that there is overflow on horizontal scrolling, does anyone know how I can get rid of this without turning to horizontalScrollPolicy for < mx:windowedapplication > tag off?

  3. How can I specify the dimensions for windows when it starts at the beginning (i.e. best, or certain height/width etc.)?

  4. There is this gray bar approx. high 30pixels that passes through the bottom of the application window, how can I get rid of this?

  Code below:

  <?xml version="1.0" encoding="utf-8"?>
  <mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" width="100%">
  
      <mx:VBox width="100%" height="100%" backgroundColor="0xEEEEEE" verticalScrollPolicy="off" horizontalScrollPolicy="off">
          
          <!-- Toolbar -->
          <mx:HBox width="100%" backgroundColor="0xCCCCCC" paddingTop="5" paddingBottom="5" paddingLeft="5">
  
          </mx:HBox>
  
          <!-- Textarea -->
          <mx:VBox id="documentContainer" paddingBottom="10" width="100%" height="100%" horizontalAlign="center">
  
          </mx:VBox>
          
      </mx:VBox>
      
  </mx:WindowedApplication>
  

  this.statusBar.visible = false;

  If my messages answer your question or help, please mark it as such.

• some technical issues on laptop

  Hello

  1 / How can I calculate how much energy my office video card.

  2 / I read on internet that monitor uses between 35 and 80 watts I think this difference come from 14 to 25 inches from the size of the screen... so now I want to know how much power can the laptop normal with HDD 200 GB, 4 GB memory, 2.2 GHZ processor and its own card video and DVD can use whitout the laptop monitor.

  Thank you

  Johan

  The specifications published on the manufacturers Web site is about the only place where you can see this specification because they all vary. The power consumption of the laptop PSU will include requirements to recharge the battery so don't give is not an accurate picture.

• Technical issue of blackBerry 8220 Smartphone custom ringtone

  OK, I'll start by saying thanks to God for this forum, lol... I got my flip for about a week now and have finally understood what I was doing wrong with my ringtones. I had them in the wrong file... Anyway, to my question, when I quand je recois get a call the phone vibrates twice and then the ringtone. Y at - it a way to make it sound only? I didn't need it vibrates the initial 2 times. Thank you!

  Profiles > advanced > highlight the profile you want to edit > menu button > edit. Now select the type of event you want to change the sound. Whenever you assign a ringtone to a contact, the phone creates an exception that said the BB if that contact calls use this ringtone instead of the default ringtone.

• Technical documentation to disassemble a Portege R500?

  Hello

  where can I find technical documentation to disassemble a Portege R500?

  Thank you

  Post edited by: T4nG

  Hello

  Don t think you will be able to find this teaching
  As much as I know page Toshiba does not provide these documentations, and I think that these manuals are not created for public use.

  In my opinion only a certified partner have received access to such books and if you ve a few hardware issues with your laptop technician ASP is your contact.

  Welcome them

• Issues of OpenSSL with Google game

  Hi, Neil

  How are you?

  We talked a few months ago and now Google has sent a new email on OpenSSL.

  I have an application native version 32.4.0.16000007.5b7cca9

  Y at - it a new version of the app Android DPS to solve this problem?

  All the best

  We wanted to let you know that your app (s) listed below statically link against a version of OpenSSL that has several vulnerabilities for users. Please migrate your app (s) to a new version of OpenSSL within 60 days of this notification. From 07/07/15, Google game toblock editing of new applications and updates that use older versions, unsupported of OpenSSL (see below for more details).

  REASON for WARNING: Violation of the provision of dangerous products of the content and policy in article 4.4 of the developer Distribution Agreement.

  The vulnerabilities have been fixed in versions of OpenSSL 1.0.1h, 1.0.0m and 0.9.8za. "To confirm your version of OpenSSL, you can do a grep via: $ unzip -p YourApp.apk | strings | grep "OpenSSL "

  For more information about the vulnerability, please see the OpenSSL Security Advisory. To confirm that you have upgraded correctly, download the updated version of the app (s) on the Developer Console and check after five hours. For other technical issues on management of OpenSSL, please visithttps://groups.google.com/forum/#! forum/mailing.openssl.users.

  Within 60 days, we do not accept updates of application containing vulnerabilities. In addition, we will reject the new apps containing vulnerabilities.

  This is a duplicate of the discussion which will take place at Re: Mail from the Google game: Security Alert: you use a highly vulnerable version of OpenSSL. We will continue the discussion in the previous thread.

  Thank you

  Neil

• Cards and rental issues with iOS 9.3.1

  So, it seems that some iPhones have been affected by the latest 9.3.1 update when using maps and location services.

  Since my update to 9.3.1 new iOS, both of my APPS of the map no longer work.

  I went to the Verizon store and they said they had 6 other customers with the same question this week come in the store, but could not help or has a solution. They said it was a problem with the new ios

  Okay, I'll be happy to take a look with you. What seems to happen?

  Well when I enter an address in MAPS or GOOGLE MAPS at random falls a PIN for my site no where close to where I really am.

  He will say that the destination is, and then all the c apps is they state "loading".

  then the cards just freeze and there is no gps in real time or the point "you are here" never moves...

  OK, so the location is never load and if so it is not updated to become precise?

  fix

  and even when I tap on the arrow to refocus or start again the directions... just it freezes or trying to load...

  and then will never give real guidance... because my original location on maps... is leagues where I'm really... or let me down in the middle of a wooded area, etc.

  Ok thank you. I know how it is important for maps working properly! I'd be keen to have fixed too.

  I completely deleted the Google maps app and reinstalled it... with no fix... same issues

  It is a problem that we've seen happen from time to time after this update. In some cases a full restore to the factory settings and then restore a backup to the phone set. Otherwise it will be a bug problem which is released with the 9.3.2 update which should hopefully will come out soon.

  also, I backed up my phone and deleted everything with a factory reset...

  always had problems even after

  even after reset and reload the iOS again... nothing works

  OK, so it seems that yours will be the one who will have to wait for the 9.3.2 update with bug fixes for the location and accuracy.

  Therefore, it does not mater if I buy another maps application? still underway to have the same problems with the gps and location?

  You can certainly try each of them have different compatibility requirements, but we found that most of these cases concern the location services on the phone itself.

  and I can't get rid of the 9.3.1 iOS version? and go back to the old version?

  If you had a backup of an earlier version, you can restore and then use the backup of the old. Just, you lose everything that you have current data.

  Hmmm... is in fact phone... like three of my friends who have an iPhone 5, iPhone 5 c and the iPhone 6 have no problem...? ! ? ! Just me...

  It is not with all phones. It has been an intermittent case so far. There is no rhyme or reason as to why some phones have had problems with the location after the update.

  Hmmm

  If no solution... and simply live with it until a new iOS comes out, and who knows how long it will be...

  I know that the update is being developed because it contains bug fixes for a few different issues. However, I'm sorry I don't have an exact date.

  Just a question - when you deleted everything for a factory restore - did restore like NEW or from a backup?

• Why my computer (HP Pavilion p6709c) takes 7 to 8 minutes, if at all to talk to my printer (Epson Artisan 835), or not at all. Technical support HP, Epson and Verizon FIOS technical support are baffled.

  Why my computer (HP Pavilion p6709c) lasts 7-8 minutes to talk to my printer (Epson Artisan 835), or not at all.

  HP, Epson and verizon tech supports have not set in 4 months.

  Hello

  1. what operating system do you use?

  2. do you get an error message when you try to communicate with the printer?

  If you use Windows 7, try to run the printer Troubleshooter and check that if it helps, here are the steps:
  Method 1:

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Under hardware and sound, click use a printer.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  I suggest that you installed the latest drivers of printer and check.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=156708&prodoid=63087901&infoType=downloads&platform=all

  Method 3:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also contact the support site of Epson to known technical issues.

  http://www.Epson.co.uk/contact-us

• Compatibility issues with gwbasic and SBS 2011.

  I currently have SBS 2003 and upgrade to SBS 2011 and a new 64-bit server.  I'm running a gwbasic program and want to know if there will be problems on my workstations.  I don't think I'll be able to run the program locally on the new server.  We had a few speed issues for most in multiuser situations.   The problem seemed to have much worse at a time I made a few changes at the same time.  Multiple e-mail accounts to Exchange, Setup of email accommodation, added a Windows 7 machine, past all the other workstations to XP Pro (4) and did my back based gwbasic program update software.

  Hello

  I suggest you send the question in the TechNet forums and check if it helps:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/

  It will be useful.

• App World - BIG ISSUES - support provider needed!

  Our support email receives much too many e-mails regarding our application of SoundEffects.  I would really like to work with someone to BlackBerry on fixing these problems.  Here's what has happed because first of all, we have published our application:

  1 SoundEffects v1.0 was released and we began to receive many emails from users of storm sounds complainant has not played

  2. we confirmed that the Simulator has worked but devices have not issues.  The only work is about to set the volume after the sound is played.  There are several positions to a firmware issue and how it was fixed, but Verizon does not seem to get the upgrade.

  3. we take the storm off the coast of the list supported for v1.0

  4. created v1.0.1, which works around the problem to constantly adjust the volume when playing sounds.  Post us this new version and configured to be used only for the storms.

  5. the correction seems to work for new customers.  Impossible to former clients who were on v1.0.  They get the option click on upgrade, but it never downloads and always error.  Some customers get just the button to buy the app again.  It is not good that we have set is a free update.

  6. we get also some emails on how to download apps again or downloads fail to Download Center.  I would like to know how to react to this.  Is there an email support for blackberry App World, because there is nothing we can do to solve these problems.

  I wish I could say this process has been worth, but given the number of purchases compared to all emails we have field for reasons beyond our control – bad firmware, bad downloads, has no updates, etc.  We would like to get a better understanding of how to answer these questions and if there are future improvements that will provide a better end-user for our customers experience.  Thanks for any help you provide.

  I got the word of support from RIM.  It seems that the problems will be solved soon!

  ----------------------------------------------------------------

  Thank you for your e-mail.  I wanted to address a few points/issues you mentioned below and try to bring a light at the end of the tunnel.

  a. the user is impossible to pass your app (connection error message)

  b. the user by not seeing your application when you log into My World

  The 2 above issues have been identified early last week, and we are working on a fix to solve these 2 problems.  We expect to implement it and to live in the next 24-36 hours. Once this fix, users must be able to correctly reconcile their applications purchased by logging into my world, but also to move your application from the old version to the latest version.

• Recommendations on the ideal forum to leave the issues to which it will be answered

  Working with Glassfish, I found it very difficult to get answers to questions about this article. I tried to leave questions glassfish.org, but also here and for the vast majority of the time, the questions remain unanswered. Can anyone recommend other Glassfish forums who have a better record on getting questions answered?
  
  Thank you
  Bob

  It really depends on what type of questions you ask yourself. If it is a purely technical issue, you can get an answer here. For the type of strategy, you probably won't get an answer for all the products that you do not ask only glassfish. In addition, it would be useful to ask in the forum right sup, IE Java System Application Server Standard and Enterprise Edition, which includes the glassfish application server. This sub-forum, although it contains the glassfish Word is actually a completely different product. Blame the marketing people for the confusion of naming.

• A few questions simple interface

  Hello.

  I've been using Edge for a few months now. some of it is incredible. the game of and stop at functions in particular.

  He has problems for sure however.

  While I worked, I copied a few interface issues.

  1. in the library, how can I see anything actually what? I see not miniature or a way to click on the symbols or png.

  2. is there a place to see all of the code I'm working with the project? I have code dispersed across a my keyframes and it would be great if there was 1 place that he had consolidated.

  3. in the choice of colors of text is it possible to eye drop pixels on the scene?

  4. can you take a picture of the poster from the inside of a symbol, or should it be what happens on the main stage? If not, can I exported images off the premises of the time line? I want screenshots of what is going in my subelements.

  5. is there a way for the symbols to be automatically names? If she'd keep just the png for the symbol and the layer name, I would be set. but as it is I'll have to make a lot of seizure and it becomes tasking and inelegant.

  6. from the assets, can I right click on an any png and make a symbol? or do I have to let the drag on the stage first and then make a symbol.

  Serious bugs:

  1. I had the scene puts don't not updated when new items are added to it. Edge had to be restarted.

  2. I had the publication settings dialog box get locked up on me several times. Edge would always work behind the dialog box, but the tricks of publication would not go far.

  That's it for now. Thank you

  John

  Hi, John.

  We are actively working on the next version of edge animate, so all these comments is excellent.  Let me answer some of your questions:

  1. we have a few icons to see what kind of assets are in the library, for example images icons when the line image, icon symbol if the element is a symbol.  However, it is impossible for you to introspect them now, but you can see an asset in his directory by right-clicking on it.

  2. Yes.  You can use the code Panel to view all the code in the form of the tree, and if you really want to see all the code, there is a button in the upper right corner that says "full code".  You can also view all events on a symbol or scene by clicking on these lines in the code pane.

  3. we do not have a function of drops eye in 1.0.x if it isn't certainly an element in our list of feature requests

  4. No, it's a snapshot of what is happening on the main stage at this precise moment.  You can get images from various places in the timeline - you can take pictures of posters of the main timeline by moving the playhead in the timeline panel, and then capture the image of the poster of the step properties panel.

  5 symbols will be named automatically, but not based on a custom symbol prefix, if that's what you're asking.

  6. not at the moment, none; you will need to do something before creating a symbol.

  About your bugs, can you please post some examples of files that reproduce the problem?  Then we can in it.

  Thank you

  -Elaine

• Technical support, command center.

  Thank you to visualize this if you do, who you are.

  I was wondering about a technical issue, I found in my computer Alienware x 51, it seems that I am unable to make the colors of my change of computer, mouse and keyboard, in the intervals, such as adding an event, or simply by changing the event to be strobe or other, however, any when I try to do that with my computer, mouse and keyboard , the button + to add action center, is grayed out, and I am unable to customize. I know that you can do with my system, because I had recently the game called "Battlefield 3" and when you play the game, the game changes my computer, keyboard and mouse colors of yellow strobe effect, to blue, and then again and repeats. Anyone of you could help me with this issue? I would like to know how to do this, but I am unable to do so apprently.

  Thanks for the info. According to the Alienware model, some options can be greyed out if they are not available. In this case, this feature is available only when it is controlled by another application (AlienFX Third Party Access), but it is not available for you to configure manually.