a fusion drive is good for audio recording?

Similar Questions

• Best Hard Drive performance for Audio

  My MacPro 3.1 is about to be replaced with the iMac, so all my internal drives need to be changed too.

  In Logic Pro 10.2 El Cap.

  Any recommendations?

  The G-Tech 7200 RPM 4 Gig usb3 seems good quality but want to see if anyone has any better ideas?

  You cannot change the drive HARD in-house on your own. You must order your new computer with the disc drive 7200 RPM for a top speed of a rotating disc. Otherwise, get a SSD instead or go for a drive of Fusion using the combination of 7200 rpm 1 TB drive HARD w/256 GB SSD or w/256 of HARD 7200 rpm 3 TB GB or 512 GB SSD drive.

  If you use external drives, then the best choice would be to use a Thunderbolt case. USB 3.0 isn't quite as quick as lightning, but lightning are much more expensive. Hard to give useful advice, not knowing what kind of audio needs you have.

• Webcams for video and audio recording

  Hi team,

  I'm new to Microsoft webcams and I am looking to buy a good webcam.  I have the following questions & requirements...

  (1) is the webcam (Microsoft Life Cam HD - 3000) capable of recording audio and video images over distances of 7-8 feet from the source for a period of at least 2 hours?

  (2) are the video and audio, free software or licensed from the webcam as the videos will be uploaded to youtube?  Also the audio must be of good quality.

  (3) I have a small budget for webcams is there any other non-Microsoft Life Cam HD webcams - 3000 Webcam that can do this?

  (4) which is the best MS webcam for video and audio recording that Microsoft offer?

  (5) I have a lenovo w520 (laptop) and a windows 7 (OS).  Microsoft webcams do work on this configuration?

  (6) are there service centers available in India (Bangalore) for the support of these products? Also is there warranty on the product.

  (7) do you need a tripod or stand to place these webcams on?

  Hello

  Thanks for posting the query on Microsoft Community. Sorry for the delay.

  If I understand correctly you want to buy a good quality with low budget webcam. I suggest you go through the link below to select and buy a webcam that works for you.

  With the help of a webcam:

  http://Windows.Microsoft.com/en-us/Windows7/using-webcam

  The Microsoft HD - 3000 cam Life is compatible with Windows 7. Check the link for more information below.

  http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Type=Hardware&Name=Microsoft+LifeCam+Cinema+HD+Webcam&ModelOrVersion=&Vendor=Microsoft&Locale=1033%2C2057%2C3081%2C4105%2C16393&LastSearchTerm=Microsoft%2BLife%2BCam%2BHD%2B-3000%

  2 b & BreadcrumbPath = Microsoft + life + Cam + HD + 3000 + & TempOsid = Windows + 7

  To install Microsoft Life Cam HD - 3000, you can check the link below.

  http://www.Microsoft.com/hardware/en-us/p/LifeCam-cinema/H5D-00013#support

  If you have any further questions, contact the Hardware Support team.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• Can anyone recommend a good for a MacBook Pro USB flash drive?

  I have just implemented a new of the retina end 2015 13 "MacBook Pro and you are looking for a 128 GB + good for fast backups flash drive while looking around a hard drive for use with Time Machine or SuperDuper.

  I'm particularly interested in: (1) A flash drive that is pre-formatted for a platform of Mac OS X for recent models. (Couldn't find it from what I saw on Amazon.)  (2) I believe that the current MacBook Pro USB 3.0, but yet there seems to be a lot of disc memory flash USB 2.0 autour.  Anyone found a good 3.0 flash drive Mac compatible in size 128 - or 200 GB? (3) If you happen to have one, it would be swell to find a drive lean enough to fit comfortably in a port USB of the MacBook, even if something is next to him.

  Thanks - much appreciated suggestions!

  You can format external hard drive for Mac OS X with disk utility.

  https://eShop.MacSales.com/shop/external-storage?_ga=1.101579265.1412082564.1442 729407

• Restore factory for 3 TB Fusion Drive settings

  I should just come here first, Apple phone support has been no help at all, took two officers to just make me an appointment at the Apple Store for tomorrow.  I'm sure they were also just guess what to do.

  I decided to format and restore my iMac with screen Retina 5 k, there is a merger of 3 TB drive.  I would just restore the drive to merge its factory settings which seems just a partition that includes the SSD & HDD together... I think that RAIDed... I'm not really sure, I've been googling and I am even more confused now.  I'm having the hardest time and whenever I try to delete a partition or delete something that I feel like I'm making it worse, which is why I called Apple, but they were not useful.

  Does anyone have any suggestions?  I have no other drive connected to my iMac.

  Is there maybe a terminal command to restore the unity of fusion to its original state so I can install El Capitan again?

  I've attached a picture of disk utility where I left with telephone support from Apple.

  

  N ° the SSD & HDD are not searched in a merger player. They linked together in a logical volume so that the data can be promoted and demoted to maintain the data that you use on the SSD and the data that you do not use the HARD disk. Giving you the SSD performance but a hard disk storage space.

  You will find indications to recreate your Fusion drive to the http://blog.macsales.com/15617-creating-your-own-fusion-drive

  I hope that you have a backup because only when you have completed this procedure the Fusion drive will be empty.

• What are the specifications for a fusion drive

  I'm looking into getting a new mac mini and I think to get a player of fusion. I currently have a mini 2011 that I install with a SSD that is dedicated to the operating system and applications, and the original for data (documents, pictures, music) hard disk. Some can give me the specs for a merger for a new mini unit (2015)? I would like to know if the SSD is 3g or 6g, what is the size of the SSD, and what is the speed of the hard drive. I guess the size

  The SSD is based PCle blade, which is much faster than a SATA III/6 GB/s SSD.

  Note that the basic model has only a hard drive or drive of available fusion while the other two models also have a large PCle based SSD as an option in addition to the rotation of the road and road of fusion. The SSD n a fusion drive is about 120 GB

• Find the update of the function driver Microsoft UAA for High Definition Audio - Realtek 880/860, version 5.10.0.5010

  I have a gateway x 86 Office 5310 s running Windows XP Home Edition with IE8.  I'm having a problem of audio-video synchronization when viewing movies from the Internet on sites like Hulu.com in mode full-screen.  Hulu uses Adobe Flash Player.  Hulu support suggested that I update my audio driver files.  The above is my original audio driver assumed provided with the machine.  I had update that driver Realtek High Definition Audio, version 5.10.0.5172, dated date 23/09/2005, by the past.  I don't know yet if the current is the correct update or not.  It does not work.

  Because the original is a former pilot, I had a lot of trouble finding a newer replacement on-site Realtek.com, Gateway.com site or on the Internet.  Offers many programs to update drivers online updates (for a price), but I'm not sure they are the right ones for my system or not.  I downloaded some possibllities on my desk and checked the Read Me files and found that they are not correct for my Bios and motherboard.  I heard talked to do not trust all update of pilot programs and certainly do not pay for them.

  Suggestions please.

  VernonD

  Hi all

  This problem is now resolved.

  After a long search without using Gateway.com or Realtek.com, I found the following (free download) Web site:

  http://www.DriverMax.com/driver/update/media/Microsoft/Microsoft-UAA-function-driver-for-high-definition-audio---Realtek-880-860

  I uninstalled the original drivers and downloaded the Driver Realtek High Definition Audio (media) version 5.10.0.5172 and it works fine.

  6.0.1.5680 driver version is also available (but not tried).

  Vernon

• need driver or app for ' beats audio control center "for HP Envy 14 1110nr

  Hi all

  I have a HP Envy 14 model 1110nr. A while back I reformatted my computer and I tried to restore it to its 'presets' and something went wrong during the format. So I tried to use my recovery disks that I had done and for some reason whenever I got to the last disk as 86% done I would get an error and the installation from the recovery discs would not work.

  For awhile, I thought maybe that could drive was bad, but after much research, I saw that a few people with my laptop even "HP Envy 14" had exactly the same problem in trying to use their recovery disks. If a guy said that he solved the problem by downloading Windows 7 64 bit and fresh install of iso of windows 7. So I did and it was working fine, and now I have my laptop works very well. One thing however that I do not have the Beats Audio Control center app came with my laptop. I tried to look on the official site of HP drivers however I can't find anything that has to do with «Beats Audio»

  Did someone here knows where I can download either the driver for the "centre of control audio beats" or application if a driver is not required?

  I would like to get the app to control audio specific beats for my laptop-> "HP Envy 14 1110nr".

  If anyone can point me in the right direction, I would great appreciate it...

  Thank you all for your time and your help.

  Here are the specifications of your HP ENVY 14-1110nr laptop computer. Here are 14-1110nr HP the HP Software Driver Downloads page . The original IDT Audio driver is available for download on this page. A newer version is available HERE. The new version contains the control user interface updates audio Beats and audio enhancement.

  Please click the White Star of KUDOS to show your appreciation

• Output HDMI on IDT driver version 6.10.6087.0 can only be used for audio?

  my audio receiver has an hdmi output. the driver idt can be used to control the output of the receiver?  I am currently connected to speakers & headset jack, and the only purpose that is to serve the receiver is to amplify the output of the laptop. is it possible to stream the audio output of the receiver through the audio driver of the laptop?

  original title: I am running vista with a driver for version 6.10.6087.0 idt. the hdmi output on this driver can only be used for audio?

  Hello

  ·         What is the brand and model of the laptop?

  ·         Your laptop supports HDMI components?

  I suggest you to contact the manufacturer of your laptop on HDMI audio settings for more information

• T400 adding 2nd HD for audio files, any PERSON using Ultrabay Adapter II successfully?

  I use my T400 to record the audio in my project studio. I would add a second HD for audio files and the content of the programmes.

  After some searching of web and because of my current installation, would like to know what additional HD system would work well. I'm happy with my system, but see some stuttering and dropping out of school. I run a MOTU light Ultra in the 4 pin F / w.

  1. I can use the Ultrabay, with SATA adapt II to drop in Seagate Momentus 7200, SATA300, 320GB, which hopefully will be compatible. I saw a post that this works like SATA300.   2 I could use a glyph Portagig 7200 RPM 320 GB, 800 F/W or USB as an external hard drive. I need Garland who at the MOTU F/W400 to connect, I'd be from ports. I don't know if USB would be as good on transfers.  NOTE: My Card/Bus Express slot is in use for other attachments.

  Is someone using a second HD with any one of these methods successfully?  I would go on the road II Ultrabay adapter, to be able to use my other attachments when editing.  CD/w could come back when I need to burn a finished product.

  No matter who sees all conflicts, I, as a beginner, do not see?

  Thank you

  Thanks to all who responded.  I was out of town, without my password.

  Bill wrote:

  I have several IIs adapter Ultrabay and they work very well with a variety of SATA 2.5 "drives for my purposes

  *********

  Dr. Khan wrote:

  Yes. It will work with no problems atall.

  I personally use one. So far so good...

  **********

  I started to pick up after a previous thread by Dr. Khan, stating that its SATA 300 disc had worked. So thanks to both for the

  conformation.

  Kawika says:

  But, seriously, I recently returned to the field / natural records, particularly indigenous and endangered forest birds. I am quite amazed at what I can get out of this PCM recorder (Oly LS-10 w / depth of 24-bit 96 kHz, AudioTechnica and Sennheiser microphones, Sony flat). Workstation is with WavePad for a function I use, noise reduction and then Raven for sonogram analysis and noculars. I looking for something that compress the "echo" the file and did not find something suitable. The Oly came with Cubase LE 4 of Steinberg, and I get a little, um, stunned, when I look at that too long. Newbing all over again, so maybe you have suggestions? The long-awaited T400 replaces my current T41 which, well, gets a little upset at times.

  *******

  Yes, I the Oly LS-10, a very good hand unit.  I also received the Cubase LE 4, but for me, its got a steep learning curve.

  Much more easy DAW is all on a single page of Mackie Tracktion 2 or 3. Very easy to learn and your final product will be just as

  professional such as Cubase. If you learn Tracktion, you will have an easier time with the more complex Cubase.

  http://www.Mackie.com/products/tracktion3/ check it out.

  ***********

  Zilla wrote:

  So, to be on the safe side with the T400 Ultrabay, you could buy the new disk of 320 GB at 7200 RPM Lenovo announced in January.

  I didn't know that Lenovo made a great and fast.  An option, if it is near the level of Seagate.

• Help required with the MacMini Fusion Drive

  Hi all

  I recently bought a second hand end 2012 MacMini i7 wth a fusion drive. The previous owner had created a windows partition. I don't want to return the machine to its original out of the box factory for my use, as I did not need to run windows on it.

  I'm fighting to get the fusion drive to merge. Currently, I have two separate discs that I named her 329 and 781 GB. Disk utility shows that both drives are very good. I rebooted into Recovery Mode to use online disk utility and readers are not displayed in red, and so there is no option to fix them.

  I used the Terminal (after reading online) and it provides the following information:

  + Logical Volume - Group F92C23DE-59E6-48E1-9525-07BAA362792C

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 790333857792 B (790.3 GB)

  Free space: 98304 B (98.3 KB)

  |

  +-Physical volume 5E674D49-E043-46E0-8B68-4A1BE6F198D6

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 7BA0BD21-C934-4179-B432-8CE91651DA29

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 669345005568 B (669,3 GB)

  |

  +--> Logical volume family 9350CC2D-8020-42E4-9C64-A2F1C4BC3DFB

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume C94C8E95-391F-48B9-8920-2BF7C0646691

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 781826392064 B (781,8 GB)

  Reversible: no

  Name: 781GB

  Volume name: 781GB

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  None of the data on disks is essential because it is broadcast on my old Mac mini and can be re-migrated later.

  Any advice on how to return the disc of the merger to its original state of the box please?

  Open Boot Camp Assistant and refer the reader to a single partition setup.

  (143720)

• Should which driver I download for Pavilion dv5237cl Notebook?

  HP site shows no driver on my dv5237cl I just installed 10 32 bit Windows on.  Missing drivers and hardware for audio ID and the mass storage controller.  Any help would be appreciated.  Laptop is in good condition and the other drivers seem to be well, just two missing drivers or a workaround.

  Hello:

  Try this driver for the mass storage controller...

  This package contains the driver for the Texas Instruments PCI (PCI - TI) 6 x 12/7 x 12 Cardbus (card reader) for the notebook models and operating systems.

  File name: sp35309.exe

  You have to hope that the audio driver XP works for your PC support page.

  Install manually if auto installation does not work.

  This package contains the driver Conexant high definition Audio Chip in the operating systems listed.

  File name: sp33443.exe

• Access to / computers sound card audio recording

  I can't find any support for access to and the audio recording of his computrers card.  I want to save her with an AVI file, for example, while documentary about a process.  I have a complete program for the video portion and wish I could increase my program with audio.

  First of all, is it possible with Labview standard (8.5) and Imaq Toolbox, and if yes, can anyone point to where it can be written to help understand how?

  Look in the 'Graphics & Sound' Sound palette' - you should find screws for obtaining sound sound card and also the screw to write to a .wav file.

  Then you'll want over them something like this (just for illustration, not tested - I was not even wire a stop button):

  

  Good luck

  Simon

• I tried to record some live audio. I downloaded Wondershare Streaming Audio Recorder I opened the program - but could not hear the audio I tried to play.

  original title: sound problems

  Hello!

  I tried to record some live audio. I downloaded

  Wondershare Streaming Audio Recorder

  I opened the program - but could not hear the audio that I tried to play. I don't know if downloading this program is related to the problem.
  I opened Skype - and everything worked fine. I could hear, etc. But if I run an MP3 in Windows Media Player - I hear nothing!
  My sound is at the top.
  In my Volume mixer, I see:
  1 output device digital (SPDIF) bounce up and down. (but I don't)
  2 but applications: sounds of Windows, Windows Media Player and Google Chrome will not move. (but they are at the top).
  Any suggestions?
  Jews

  I managed to get the results of work. I don't know where come the SPDIF.

  I downloaded a new driver Realtek for audio from the computer. This corrects the problem.
  But I still want to know what happened.

• Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

  Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

  Hello

  Try resetting the default associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  ====================================

  Also follow these steps:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.