A link Thinapp dynamic application support?

Hi, people.

Link to the application is a very good device that provides flexibility to delpoy applications. But the link

application package is defined in the file package.ini, which means it is hardcoded, you can't change it in run mode.

I wonder if it is possible for possible box dynamic link, you can set the application at run time.

Well, according to Manuel Thinapp, copy of the package you want to create a link to a predefined directory can perform

a kind of dynamic deployment. But the problem is that some applications are not simple plungins, links between

applications can be complicated.

For example, Adobe Acrobat provides a (a toolbar button) plugin for Microsoft Word, which simplifies the conversion

between doc and pdf files. Acrobat is a plugin, but it is not a plugin. Acrobat is a stand-alone application.

In this senario, both Word and Acrobat are independent applications, but they have a certain relationship. Now, I have

have no idea how to build applications to meet this specific requirement.

But I think that dynamic link can be a good solution for this senario. You can link Word and Acrobat, say, this time, I have

can run Word with Acrobat is installed, can I take advantage of Acrobat to Word modules. In the meantime, I can still run Acrobat

starting from a single package.

Is there anyone who has any ideas?

Thank you.

Advertisement

Hello

I understand your problem and I'm strugeling with him, as well as in certain situations. The problem is that the modules are loaded superimposed. The last one wins (file/key) charge "item.

Example:

App 1: file "c:\test.txt": Hello App 1

App 1: file "c:\test.txt": Hello App 1A Plugin

App 1 b: file "c:\test.txt": Hello App 1B Plugin

Now 1 App is the main application, and plugins are the apps applinked optional / required. The contents of the file will be the content of the last loaded module, so that the plugin has or B (depending on the denomination and so on). Imagine that this file is the file that specifies what plugins have to be loaded. I guess you can understand what will be the result.

It is especially interesting if you have the situation that your plugins are also activated apps.

Real life example:

You encounter a word that supports plugins. First of all, you capture and make the ' application '. Then, you keep (do not discount to clean system) system and the plugin to capture on the same system. In this case, the plugin will be able to change the settings in the existing installation of the word, who are caught in the capture. If you add this screenshot to the option/requiredapplink-app on the word, you will notice that it works.

The reverse would not work. For example: the plugin is not a plugin, but a main application (like your "plugin" adobe). example above again: you make the plugin (acrobat), the main application and the Word as applinked app. In this case, the plugins (maybe /) is available in the last module loaded (Word) the plugin is not known/configured to be loaded. (Of course there are many kinds of plugin-loaders, so it could work in any case for a specific application)

What I did:

I captured applications separately, but after eachother (so the dependent application can still ask integration.) I have created another "loader project' and applications are added as required applinks (to ensure that the sequence of loading). In the project of charger, I copied all the exe that are referenced in various applications, allowing me to create references of departure in the package.ini. It works all the time, but most of the time that it does.

To solve this some "prioritize" would be necessary for files and registry keys, but it would still be a big problem, configure it so that it works all the time.

Kind regards

Michael Baars

Tags: VMware

Similar Questions

  • Conditional display of links - using dynamic application example "Actions".

    I have a similar to the one shown on the page need delete and refresh the application "Sample of dynamic Actions" on Apex.Oracle.Com.  However, in my case, the application must be selective.

    How can show us the cross out 'X' for people in the SALES Department.

    I tried this using a case statement to return the EMP_IDS for people in the SALES Department and NULL values for all others (in a new column called Sales_Emp_IDS.  My attempts failed but that each record in this new column shows red X if the emp in the sales department or not.

    Is this possible?

    Here are the changes I made to the EMPLOYEES area

    Adds the source code of the next column

    SELECT e.ROWID

    e.EMPNO ID

    case when 'd.dname =' SALES

    then e.EMPNO

    Another null

    end Sales_Emp_IDs

    e.EMPNO

    e.ENAME

    e.JOB

    m.ename MGR

    e.HIREDATE

    e.SAL

    e.COMM

    DEPTNO d.dname

    OF #OWNER #. E EBA_DEMO_DA_EMP

    #OWNER #. EBA_DEMO_DA_EMP m

    #OWNER #. EBA_DEMO_DA_DEPT d

    WHERE e.mgr = m.empno (+)

    AND e.deptno = d.deptno (+)

    Then on the report to the report ineractive attributes I copied the link column to delete settings

    Text link < img src = "" #IMAGE_PREFIX #red_x_16.png "alt ="Remove"> "

    Link attributes = id' #ID # "class ="delete" "

    Target URL

    URL                 #

    Thank you

    Gene

    Hi Gene Lowy,

    you see X for each column because you made conditional, only the column don't value not the link,.

    Need to add X in the query itself.

    1. remove this part of the column binding

    The link textDelete

    Link attributes = id' #ID # "class ="delete" "

    Target URL

    URL                 #

    2 change your query, added X in the query.

    Replace with your report query

    SELECT e.ROWID
        ,  e.EMPNO ID
        ,  case when d.dname='SALES'
                then 'Delete'
                else null
           end Sales_Emp_IDs
        ,  e.EMPNO
        ,  e.ENAME
        ,  e.JOB
        ,  m.ename MGR
        ,  e.HIREDATE
        ,  e.SAL
        ,  e.COMM
        ,  d.dname DEPTNO
    FROM #OWNER#.EBA_DEMO_DA_EMP e
    ,    #OWNER#.EBA_DEMO_DA_EMP m
    ,    #OWNER#.EBA_DEMO_DA_DEPT d
    WHERE e.mgr = m.empno ( + )
    AND   e.deptno = d.deptno ( + )
    

    3. change your Sales_Emps_IDs column-> column-> display attributes as-> change to Standard report column.

    Hope this helps you,

    Kind regards

    Jitendra

  • So where can I find custom dynamic link libraries to ensure that they are linked to trusted applications?

    Log name: System
    Source: Microsoft-Windows-Wininit
    Date: 27/05/2016 05:56:11
    Event ID: 11
    Task category: no
    Level: WARNING
    Keywords:
    User: SYSTEM
    Computer: SearchMachineRevistied
    Description:
    Custom dynamic link libraries are loaded for each application. The system administrator should review the list of libraries to ensure that they are linked to trusted applications.
    The event XML:
    http://schemas.Microsoft.com/win/2004/08/events/event">
     
       
        11
        0
        3
        0
        0
        0 x 4000000000000000
       
        44137
       
       
        System
        SearchMachineRevistied
       
     

     
        0
       
       

     

    Nothing in Event Viewer, journal should defy explanation.

    Your system of driving wrong way or did you just noticed this in the event log and I wonder why see you?

    That the message trying to tell you is that your system is told to find and load at startup what are probably dll of third part of something you have installed is just an informational message / warning.

    It is possible that something you have installed/uninstalled in the past might have used this feature of Windows that you can read here if you're interested:

    https://msdn.Microsoft.com/en-us/library/Windows/desktop/dd744762%28V=vs.85%29.aspx

    You can check to see if there are all the dll specified for load and if there is not, turn off this thing and you will not see the message more.

    You have to look in the registry to see what is happening, and since there is no cancellation or exit without saving the changes in the registry editor, you should first do a manual System Restore Point and consider backup of your registry with the free and popular tool:

    http://www.larshederer.homepage.t-online.de/ERUNT/

    The click the Start button/orb and enter in the box:

    Regedit

    And choose to run as administrator the Registry Editor:

    Then navigate here:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows

    The AppInit_DLLs value is where none of these DLLs are specified and if yours is empty (which means that there is no dll to load) just tell Windows not to attempt to load something that does not exist.

    Check the value of LoadAppInit_DLLs and if it is set to 1, double click it and change the value to 0 (zero), close the registry editor, restart and double-check your event viewer.

    Is there something in the AppInit_DLLs field (a comma or space separated list of DLLs) then you should leave things alone because they are there for a reason any and accept the fact that you will see the informational message whenever your system boots.

  • BakerlessPillowwork in the Application Support folder

    I went looking for suspicious files after clicking a download link shaded and found this in my root (?) Record of Support request. Mention this because otherwise I would have thought it was a new file placed by an update, but I have not updated my OSX in awhile

    Inside the BakerlessPillowworks folder is an application of process simply called 'agent' and .plist files.

    I force quit on the process of 'agent' in the activity monitor and put the folder in the trash on a case where (are not empty, but I think that all signs point to him having to be removed)

    I found nothing else on this file for my bets are that it is new, but I hope that someone else could have seen or have a better idea of what it is or what to do.

    Thank you in advance, I made an account just for this post

    Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

    You may have installed one or more variants of the Trojan 'InstallMac '. Please take the following steps to disable.

    The criminal behind this attack tries to make the malware difficult to remove by varying names of the files it installs. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

    Back up all data before proceeding.

    1 triple - click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

    ~/Library/LaunchAgents

    In the Finder, select

    Go ▹ go to the folder...

    from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return. A folder named "LaunchAgents" opens.

    Press command-2 key combination to select the display of the list, if it is not already selected.

    There should be a column in the update Finder window. Click on this title to sort the content by date. This will make the related files easy to identify regardless of their names, because they will have the same modification date.

    2A inside of the folder that you just opened, there may be files with the name of all these forms:

    something. AppRemoval.plist

    Something.download.plist

    Something.ltvbit.plist

    Something.notification.plist

    Something.Update.plist

    Here, something is usually an empty string of sense, for example one of the following:

    Epolife

    InstallMac

    Javeview

    Kuklorest

    Manroling

    Otwexplain

    Here are examples, not a comprehensive list. The chain could be anything, and there might be more value of something. Looking for a group of files with the same date of change who match the description.

    Lately, the striker of "InstallMac" a were quick strings 'AppRemoval', 'download', 'ltvbit' and 'update' in the names of its records. For example, you might see file names such as these, instead of the above:

    something. AppVemoral.plist

    Something.dolnwoad.plist

    Something.btvlit.plist

    Something.uadpte.plist

    You may have more than one copy of the malware, with different values of something.

    Place all of these in the trash. If there are other files whose name begins with something, those in the trash also move. You can get a caveat that some files are locked; Delete them anyway.

    Once you've done that, we may not have anything left in the LaunchAgents folder; in this case, you can remove the folder, but otherwise does not delete it. Other files in the folder are not necessarily malicious (though they may be, if you have also installed another type of malware).

    Log off or restart the computer. The Trojan horse should now be inactive.

    3. This step is optional. Open the folder as in step 1:

    ~/Library/Application Support

    and move it to the trash of the subfolders with the name, something you found in step 2.

    Do not move the Application Support folder or anything else inside.

    4. open the Applications folder. If there is an element named something, or "Hell Zip", or with any of the other names listed in step 2, then drag it to the trash.

    If in doubt, press option-command-4 key combination to get the apps by date added. Look at the apps that have been added since you first noticed the problem. If there is one, that you don't recognize, drag it to the trash.

    You can get an alert that the item is locked. Confirm that you want to move to the trash.

    Empty the trash.

    If you receive an alert that the application is running, force it to quit.

    5. from the Safari menu bar, select

    ▹ Safari preferences... ▹ Extensions

    Uninstall all extensions, you don't know that you need. When in doubt, remove all of them. None is required for normal operation. Do the equivalent with Chrome and Firefox browsers, if you use one of the people.

    If the window does not open, restart the computer in safe mode. Some caches maintained by the system will be rebuilt.

    6. replace the search engine and home page in each of your browsers, if either has been changed. In Safari, first load the desired home page, then select

    ▹ Safari preferences... ▹ General

    and click on

    Set on the current Page

  • Firefox can be configured to open the Firefox more recently-active window when you click on a link in another application? Using multiple profiles.

    I think it's really a feature request, but I don't see a forum for this. I used to use firefox almost exclusively, but switched to chrome when I started working freelance for a couple of different companies - the identities of chrome feature really helps me keep my sanity by having a unique identity for each company. However, a problem has recently developed with chrome which brought me back to firefox. The profile under firefox feature seems to have gotten much better since I made the first move, and I'm pretty happy with the way it works... with one exception:

    With firefox, clicking on a link in another application, always opens in the default profile. With chrome, she would always open in the browser window that was most recently active. It's a very intuitive behavior, because everything I do in the other application (e.g. thunderbird, evernote, Skype) is almost always linked to whatever browser window, I had finally opened.

    Any chance to do this implemented? Or maybe there is already a way to do this? I found the following related topics, but neither helped with this issue:

    https://support.Mozilla.org/en-us/questions/981608?ESAB=a & As = AAQ
    https://support.Mozilla.org/en-us/questions/983341?ESAB=a & As = AAQ

    The 'solution' to this topic is that there is no real solution so that the owner of this thread wants to happen.

  • system is not able to run the Apple Application Support service

    I can't install itunes on windows 7 32 bit. Any suggestions on Apple Support do not work. The system is not able to run the Apple Application Support service. Any suggestiones?

    Can you post the error message you get when you try to install or launch iTunes?

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Apple Application Support (32-bit) deleted, WIN 10, itunes 12.3.3

    Hello

    Maybe someone can help me?
    Before you try this already found solution, I ask the questions, again, because of my OS and Itunes is not the same version as described in the solution mentioned down.

    After installing WIN10, I cleaned my system and made a big mistake!
    I removed Apple Application Support (32 bit) and just kept Apple Application Support (64-bit)
    -on a 64 bit system, my way of thinking was wrong--

    Now, I have NO error message, but itunes will be stuck to less still when I connect the iphone to the computer 6.

    I try to avoid to uninstall itunes completely. (database large, with many playlists and all the songs with Board of the Album etc..)
    Before him a. .m error itunes performed excellent.

    Is the fixed failure with which describes the solution, without any loss of performance?

    Thanks in advance

    https://discussions.Apple.com/thread/5867877

    iTunes on a 64-bit system has 32 & 64-bit components.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

    More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

    Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

    TT2

  • Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

    Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Why can I uninstall executable programs Apple "Apple Application support"

    "Why do I not the option uninstall executables" Apple Application support Apple "&" Apple mobile device support "? When iTunes is not working then? How to resolve this situation?

    iTunes is dependent on the Application Support Apple and Apple Mobile Device Support. Usually the only reason to remove their independent would be to solve a problem with one of the components. See install missing components for a method to refurbish the or see troubleshoot problems with iTunes for Windows updates for general advice. The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

    Your library must be affected by these measures but there are also links to the backup and recovery advice it should be necessary.

    TT2

  • try to install itunes but get a win32 error message and ignore then an Apple Application Support is not found

    When I click on install to itunes, it goes very well until it will try to install it and then I get a weird error that the basis of this message is a win32 error. Then so I ignore this and itunes is able to be installed, but when I click on itunes, I get an Apple Application Support not found message! Eeek help someone!

    Hello

    1. What is the version of Windows installed on your computer? For example, Windows 7, Vista.
    2. have you done any software or hardware changes on your computer before this problem?
    3. What is the full win32 error message you get when installing itunes?
    4 is specific to the program the issue?

    Since we don't know the version of Windows installed on your computer, you can read the following general steps.

    I suggest you to bring to the version of Windows installed on your computer so that we can better help you.

    To work on the issue, refer to these methods.

    Method 1:

    Run the fixit from the link:

    Solve problems with programs that cannot be installed or uninstalled
    http://support.Microsoft.com/mats/Program_Install_and_Uninstall
     
    Method 2:

    Refer to the steps from the link.
    Problem installing iTunes or QuickTime for Windows
    http://support.Apple.com/kb/HT1926
    NOTE: after you complete the steps suggested in the section (4) Disabling other incompatible software), you must start the computer in normal mode using these steps.
    For the Windows XP computer:
    a. from the Start menu, click run. A run (command prompt) window appears.
    b. type msconfig in the Open field , and then click OK. The utility of Configuration system opens.
    c. click on the tab general.
    d. Select the 'Normal startup' option.
    e. restart the computer.
     
    For Windows 7/Vista:
    a. from the Start menu, click all programs click Accessories.
    b. click run. A run (command prompt) window appears.
    c. type msconfig in the Open field , and then click OK.
    d. If Windows needs your permission to continue, click on continue. The utility of Configuration system opens.
    e. click the general tab.
    f. Select the 'Normal startup' option.
    g. restart the computer.
     
     

    In addition, you can also ask your question in the Apple discussion forums.

    https://discussions.Apple.com/community/iTunes

    Hope the information is useful.

  • Error code 80070424 during the application update the window and installing the Apple Application Support

    Hi guys,.

    I am running Windows Vista Premium Home 64 bit. This all started when update me my iTune recently and since then it has been a headache after another. Basically, when I try to install iTune, it says that I need to install Apple Application Support first, and when I do that, I get the following message appears:

    "An error occurred during the installation of assembly"Microsoft.VC80, CRT, Version... ". "and it lights up.

    In addition, I also tried to install Vista SP 2 recently but my window update also gives me a pain. I can't get the update because when I try, it says 80070242 error code - Windows Update encountered an unknown error.

    Here are the pictures of the 2 filters:

    Any help at all would be greatly appreciated.

    Thanks for the suggestion of Augustine, but the problem is still present. The order went through, but I always feel error 80070424 and is possibly due to a malfunction of Windows Installer Module.

    Thanks for the attempt. Appreciate it.

    Suggest you check to see if the Windows Modules Installer service is present, has not been disabled and can be started.
    Right click the computer on the desktop or the Start Menu and choose Manage
    The UAC prompt to enter a password if one is used, then click on continue or Yes.
    If no password is used, click on continue.
    Click the arrow next to Services and Applications
    Click Services in the left frame
    Scroll down the list of Services in the context of e right until you come of Windows Modules Installer .
    If it is present, check under Startup Type to see if it has been disabled.
    The default setting is manual.
    At the top left will be a link to start the service
    Click on it and see if the service can be started.

    If the installer of Modules of Windows is disabled, right click on it and choose Properties .
    Set the startup type to Manual , click on apply, OK.
    Close the computer management console.

    If the Windows Modules Installer is not present and of Flavius are too difficult for you to follow, then replace
    Contact MS Support free of charge.
    Start here
    Make a mark next to "I use it for my own personal use.
    Now click on the button continue.
    Click on the I accept"" button.
    Support options will be displayed. The only option I see here is for email support.
    Click on the button continue to access the support request form.
    Fill in the fields and then click on the button continue.

    MowGreen Services consumer safety update

  • Microsoft C++ Runtime application Bibliothequece has requested to terminate in an unusual way. For more information, contact the application support team. "

    This application has requested the execution to terminate in an unusual way. For more information, contact the application support team. "
    appears when you try to load an image for an e-mail? How should I do?

    Hello

    Do the steps provided by Jessen P in your previous post worked?

    Refer to this link: http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/microsoft-visual-runtime-library-pops-up-when-i-try/2297c3ab-9824-46e7-8384-7915f981dd76

    Hope the information is useful.

  • Ago 10-15 second delay after you have clicked on a link from any application Windows 8 Metro... before opening the web browser.

    Title explains the problem: ago 10-15 second delay after clicking on a link from any application Windows 8 Metro... before opening the web browser.

    Any browser (IE, Chrome, etc.). Any application as long as it's a subway app (mail, etc.). If I click on a link to a Web page from any metro Windows 8 app it is 10-15 second delay before its opening.
    I tried to repair Windows, disable Windows defender, and a bunch of other things and nothing is set.
    Anyone have any ideas?
    Thank you!

    Hello

    Try to manually configure the DNS servers in the network card settings (guide: http://www.plus.net/support/software/dns/changing-dns-windows-8.shtml).
    It fixed the problem for me.
    Apparently it has something to do with the reuter incorrectly redirect DNS queries (I use D-Link).
  • Where is the folder/Library/Application Support / Adobe / Fonts CS6?

    Hi people,

    I've recently updated to Mac OS X Yosemite and I now get a conflict with my Neue Helvetica postscript fonts and system fonts.

    So I turned off the activation of postscript Helvetica Neue fonts (I use FontExplorer X Pro 5) and put these fonts in the folder/Applications/Adobe InDesign CS6 / Fonts. This solution worked. Conflict of policies went away and I could happily use my fonts in InDesign.

    However, I need to use these fonts in other Adobe applications also. So I was wondering if there was a record of general policies for CS6.

    I read online to a folder/Library/Application Support / Adobe / Fonts but perhaps it is an earlier version of Creative Suite, because I can't seem to locate it.

    Thank you

    Fonts folder locations are given in the link below:

    https://support.Apple.com/en-in/HT201722

    Try ~/Library/Fonts

  • Adobe application support files of missing files in the dialog box?

    I get a dialog box when I open PS CC 2015 that a file (s) is missing from the Adobe Application support folder is missing. I click ok and PS CC 2015 seems to work very well. This is a new message that just popped up. The dialog box also tells me to reinstall the PS... Comments?

    I tried again. I uninstalled the CC PS, then leave CC. reinstalled the link CC and CC PS, 2015. Who took care of the problem!

Maybe you are looking for

  • What happened to Firefox Junior? Is it still working?

    Is it still a viable product?

  • Problem with Fingerprintsensor on Portege A600 with Win XP and Win 7

    Hello I bought a new Portege with Win Vista on it and Win Xp on a CD Revovery. It has worked on my new laptop. Then I installed Win 7 on it without making a backup of my system of work. It was a big mistake. I downloaded Win 7 of the Toshiba homepage

  • PXI-5441 vs PXI-5421

    Anyone know if the PXI-5441 module can be ordered with the LVDS output option? In the data sheet is indicated, that a similar, more simple PXI-5421 can generate low-voltage-diff-signal, too (not only the complete analog single).

  • Color property of custom control

    With the controls included as boolean OK you can change the color true or false by accessing the properties > Apperance > colors.  Then click on the color box to change the color of the State.  Is it possible to do the same thing with a custom Boolea

  • Hard disk failure and recovery of the operating system

    I have a model p6310f desktop that had a hard drive failure.  I bought an SSD and install.  I looked for a recovery disk; However, I have not found one.  I was told that the recovery disc is on the hard drive in a separate partition.  Is this really