A link to a good book talking about windows 7

Similar Questions

• Someone at - he heard talking about Windows 7 clean install on new discs, taking 63 GB of disk space?

  It must be something simple, once figure you it out!  Have had 2 calls assisted support 2 days for a few minutes each.  Guy does not seem to have a clue.

  anyway... short as possible...  I built a new computer game. 3 hard drives SSD crucial m4, 1 x 128 GB, 2 x 256GB and 2 TB WD SATA III for storage.

  You want to put Windows and Office, Antivirus etc. on the 128GB SSD... all games and programs on the two 256 GB SSD drives.  Requirements, I see it everywhere, including on the box... 20 GB for 64 - Bit.

  I did a clean install Windows 7 home 3 times and then switch to Win7 Pro using a card key to upgrade time everything.  Fact a facility with everything configured as it was planned.  Made an installation with only the 128GB drive connected.  The two ways... Windows supports 63 GB of space when you go to 'My computer' and watch the free space.  STILL... If you go on the Windows disc and open and select all folders, files etc... including the hidden files/folders... you get a total of about 25 GB disk!  Exactly as you might expect.

  Contacted Microsoft through chat... support person called... He repeated that everything I said I already tried and I even gave the data, figures and results, etc. no help.  Then he had me download an iso file and burn a bootable DVD with Windows 7 Pro on this subject.

  Tried and same results.  SO now, I installed Windows 7 Pro 64 bit on 2 different Crucial Solid State Drives and a Western Digital 1 TB SATA drive.

  Each installation takes 63 GB of disk space in 'My Computer'.

  Each installation... When you navigate to the drive and open and select all the files and click right properties... get you about 25 GB of space occupied by the files.

  Run a CHKDSK scan and it will show also the 63 GB or more space used.

  Have already removed all the shadow copies, deleted all temporary files, ran CCleaner and got rid of everything. Delete the backups or restore points.  Makes no difference.

  I have install Windows and in 'My Computer', it shows that 63 GB is used.  And it is above all of the windows updated hundred occur after installtion.  Nothing else was installed.

  Any ideas?  I can put Windows on a 128 GB SSD, which only shows GB total 119 in 'My Computer' in the first instance.  After all the windows updates and virus and MS Office program, it would be complete and have no space to work.

  The point is... Windows should only be taking up about 25 GB... May 30 when it is updated and corrected.

  Finally I thought of her.

  When windows is installed into hibernation is enabled... No matter what you see in equipment/control panel and power sound/Options/change Plan / change advanced power settings.  Hibernation settings and parameters of sleep can show as disabled in the advanced but you will ALWAYS have a file called "Hiberfil" at the root of the C drive and it will be or has been on my system... 24 GB in size.

  You will have to view all the files/folders to view this file.

  24 GB windows put side also used space for modes of hibernation / sleep.  24GO of Wasted space!

  I have also 32 GB of system memory.  When you install windows by default... it sets the page file/Virtual memory size in the same amount of memory you have installed.  In my case a little more than 32 GB was my page file size.

  IF you have windows which takes about 12 GB installation, 1 without updates.

  For more, 24GO Hibernation and 32 GB of page file.

  So, when you look at 'My Computer' after a clean and no installation update again... Windows takes 12 + 24 + 32 GB = 69 GB... 69GB for a windows installation!  And the hard drive is only considered GB 119.  Once you do all the 'windows updates' installation will be more several GB.

  So my 119GB SSD drive will be 75% or more complete just after installing windows.

  SOLUTION: To get rid from where to disable Hibernation and recover 24 GB of disk space... go to start > programs > Accessories and right click on command prompt and select "run as Administrator".

  This executes the function of the command mode prompt "high command prompt".

  Your command prompt window should read as C:\Windows\System32 in mode "high".

  If your window to prompt similar to C:\Users\Tony bed... then you are not in high mode.

  Type the following in the command prompt window to disable the hibernation: powercfg-h off and press ENTER.

  There is a space after the 'g' powercfg and also a space between the '-h' and the word 'off '.

  The "Hiberfil" file in your root of C will have now disappeared and wah - Los Angeles... you 24GO more free space on your drive currently.

  "#2 SOLUTION: right-click on"My computer"and select properties.  In the window that opens on the left column, click on "Advanced System Settings".  The window that opens will be the "Advanced" tab  Click settings in the performance section of this tab. In the window that opens this time again click the "Advanced" tab  Down under "Virtual memory" click on the "Edit" button to change your virtual memory settings.

  In my case, I stopped windows manage the virtual memory and changed the setting from the window of 32 GB virtual memory size, because I have 32 GB of installed system memory... I reduced my virtual memory to 8 GB which is always a huge!

  But in doing so, I got another 24 GB of disc space given my size virtual memory 8 GB value.

  So now, once you do both of these actions, you can go into 'My computer' and you see that now only have on (my) 20 GB of space is used instead of the original GB 68 to 69 of the space used.

  So now I have just to 98 GB of free space on a disk Go 119... with the installation of windows occupying about 20 to 25 GB of space that you want to see normally.

  Before... I had about 45 GB of free space (after update).

  Auto power OFF after put into hibernation and make sure that you do not have an ungodly amount of virtual memory reserved for the use of windows!

• How can I get word 2007 to talk about windows mail to deliver direct mail emails?

  I have windows 8 and am on mail merge to create a file from a table of data in excel. It worked on my previous PC which was Windows Vista. All I get is an error message that says "you must connect to microsoft exchange to access your address book, unknown error."

  You cannot use the mail limited merger app. Go to the office to use the Word mail merge.

• Is there a good book for learning of RoboHelp 7

  Anyone know of a good book for learning of RoboHelp 7? I googled but didn't find anything - and I'm frustrated with the (difficult to navigate, not well indexed) online help.
  
  Thank you. LLA

  There is not many around at the moment. Rick Stone is putting together a few guides that we are talking about, but they are not yet ready. Until then, maybe this link can help.

• good books for oracle

  Hi people,
  
  Please suggest good books and links to learn oracle database administration.
  
  Thank you
  Mike.

  1000611 wrote:
  Hi people,

  Please suggest good books and links to learn oracle database administration.

  Thank you
  Mike.

  Oracle Database 11g Administration expert Sam R. Alapati

  http://books.Google.co.in/books/about/Expert_Oracle_Database_11g_Administratio.html?ID=tdRes4IdLiIC

  I suggest to read the oracle documentation to learn and practice on the test computer.
  Links:
  docs. Oracle.com
  http://Tahiti.Oracle.com/
  http://Datadisk.co.uk/main/Oracle.htm

• Good book for certification OCJP

  Someone suggest a good book that I can use for certification of ocjp 6
  
  Thank you
  Sam

  Just FYI, you can look at the Java code ranch communities SCJP forum for experiences of people with certification for other valuable information about the exam.

  https://www.coderanch.com/how-to/Java/SCJP-FAQ

  And to start with SCJP, you can follow BOOK BY SCJP Kathy Sierra and Berta Bates who has good material for SCJP.

  Here is the link to the book on amazon

  http://www.Amazon.com/programmer-practice-exams-310-065-certification/DP/0072260882/ref=sr_1_2?ie=UTF8&QID=1344867201&SR=8-2&keywords=SCJP+Sun+Certified+Programmer+for+Java+6+exam+310-065

  HTH

  Thank you
  Rajesh Assata

• Talk about screen accessibility

  I love the option of screen talk and share with students with reading disabilities. My problem is that students are having problems turning on with the stroke of 2 fingers.  He will often return the page to the top, pull up the safari web address entered or even drop the Notification Center. Is this there any other way to market that requires less precision?   The best scenario would be the clik triple but can't seem to find a way to get there.  TIA

  Hi, Tdcraw.

  Please visit Apple support communities.

  I see that you are looking for an alternative to option screen talk as there were some difficulties to use the sweep two fingers.  While there is currently not an option to set the precision slide, another option would be to ask Siri to talk about the rear screen for students.  You can access Siri by pressing and holding the button Home button until the message asking you, "What?" that can help you with Then say "talk to the screen."

  Use Siri on your iPhone, iPad or iPod touch

  Talk about screen

  If you have a hard time reading the text on your iOS device, use screen speak for read you your e-mail, iMessages, web pages and books. Put the screen talk and slide down from the top with two fingers, or just tell Siri screen talking and have all read of the page content. You can adjust the dialect voices and speaking rate, and words highlighted as long as they are read.

  Accessibility

  See you soon

• Good book

  I'm looking for a good book on the development of the RIM, any suggestions?

  He delivers havn't a few docs developer looking in wire, thought about this option.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=13264

• vSphere - any good book on learning sdk

  can someone advice a good book about learning sdk. VMware documentation is not for beginners like me

  You'll love this Joane...

  VMware VI and vSphere SDK: management of VMware Infrastructure and vSphere

  By: Steve Jin

  Last updated on Safari: 2009/08/07

  Publisher: Prentice Hall

  Publication date: September 24, 2009 (estimated)

  Pages: 552

  Available on Safari also...

  http://techbus.safaribooksonline.com/9780137154470

• Need good book on spring

  I need good book to learn more about the Spring framework. I want to learn how to create web applications from scratch using spring. Anyone know a good book on spring for beginner? I tried the recipe for spring, but I think that's not a type of "rollover" of the book. Thank you

  801264 wrote:
  I think to integrate GWT for the UI, Spring and Hibernate finally to access the data. Is this a good combination for business application?

  It all depends on how you define "good combination". Yes, who can work without a doubt.

  Everybody to share their experience with the frames of their choice? Thank you

  There are so many executives and developers out there it's like asking people what their favorite color and why... also people do not always get to choose their frames.

  But of course, I can give you some info: do not use Struts 1.

• talking about Skype and see another

  Talking about Skype and see Facebook

  Thank you

• Can not see the person I'm talking about

  Hello!
  I'm having a problem with video calls. I don't see the people I'm talking even if their webcam is enabled. My Skype was working perfectly fine when this problem came out all of a sudden. I'm having this problem with all the people I'm talking about. I looked for a solution in the Skype settings, from my laptop but found nothing. And that's when I discovered this community!
  Does anyone have an idea on how to fix this?
  Thank you!

  It's not quite you can do this by using the Skype options available, but what you can try is to reset all settings to the default values.

  Exit Skype or use the Windows Task Manager to kill any which Skype.exe process. Go to start and in the box search/Run type %AppData%, and press enter or the OK button. Windows File Explorer will appear. Move a folder with the name of Skype. Rename the folder to something different, for example Skype_old. Restart Skype.

  NB. If necessary, you will still be able to re-establish your call history. All data are always saved in the Skype_old folder.

• my external box disappeared to leave the box you are talking about by hitting the alt, ctrl, delte buttons

  Hi, the outer box has disappeared somewhere to leave the box you are talking about pressing alt, ctrl, delete buttons. Is there a way to fix this? He used to have 2 headers which had 2 individual x and a header on the top with click on other things and the computer turns off and then when I brought it up, he was gone. Now when he says that it runs inside the white box, it shows that on the new background to the right and two other things before that, don't remember what he said, but nothing on the top of the a single box. God bless you and thanks, I hope someone can tell me how to recover everything. Thanks again, Linda

  Hello

  Looks like you have the small footprint mode Task Manager.

  Solve you the problem by double clicking inside the border of what is the Task Manager window display.

  Here is a tutorial that shows you how.

  http://www.Vistax64.com/tutorials/114377-Task-Manager-small-footprint-mode.html

  See you soon.

• Metadata Windows 7 I tend to take a lot of pictures and I want to be able to add metadata to photos that I know what talking about photography,

  original title: metadata Windows 7

  I tend to take a lot of pictures and I want to be able to add metadata to photos that I know what talking about the picture, where it was taken, the people of marking on the photo, etc. I used the Windows 7 Explorer to add metadata to photos (the pane at the bottom of the Explorer or by doing a right click and using the properties--> details recording here). Everything's all right. But the addition of data to hundreds of photos is a very demanding task. Therefore, I wanted some advice on the following questions before that I seriously undertake this work on thousands of photos:

  1. If I add metadata to photos using the Windows 7 Explorer, and then copy the photos to another computer with Windows XP, I keep all the metadata information that I added in Windows 7 and be able to read in the Explorer of Windows XP? Or will I lose all the metadata as we can add in a specific Windows 7 format, unreadable by Windows XP? Or even that I lost a part of metadata (fields newly added in Windows 7, in case some [which?])?
  2. These metadata will be compatible in the future versions of Windows? If I upgrade to a later version of Windows (whenever it comes out), my metadata laboriously added will be present and readable as well as all the pictures?
  3. Is metadata embedded in the file or is it stored in another table inside the Windows OS? I know this because, to wire different versions of Windows, I have totally lose the metadata when I copy the photos or that it will be present in the Interior photos but will only be unreadable?

  If I lose any of my metadata on different versions of Windows, then this method of recording information of the photo seems unnecessary. If this is the case, can someone advise me the best method to save the details of the photos inside photos so that they are available (and readable), everywhere where the photo is taken or copied.

  Hi mnae,.

  If you add metadata to photos and then to copy the photos to another computer it keeps all the metadata information that you added.

  If you upgrade to a version more recent Windows information will be preserved. Metadata are embedded in the file only.

  I suggest that you first test with some files and check.

• Jabber can talk about Skype?

  Hello

  Jabber (for Windows or iPAD) can talk about Skype? Which are necessary to integrate them?

  Thank you.

  Michael

  For video, not without an intermediary. Examples include Imagcle , or BlueJeans. Essentially CUCM routes the call to the server of Imagcle SkyStone which converts the call into the Skype network/protocol.

  For audio, there is a Connection of Skype feature that allows you to create a between a CUBE and their cloud SIP trunk. There are a lot of discussions here on the forums about this. An example: https://supportforums.cisco.com/thread/2126467

  Please remember useful frequency responses and identify useful or correct answers.