A LTE sim card slot can also be used for a GSM sim as well?

Similar Questions

• It can also be used co.kr domain?

  It can also be used co.kr domain?

  Yes, the domain is completely independent of Muse. It will work with any host that takes care of this area.

• Output HDMI on IDT driver version 6.10.6087.0 can only be used for audio?

  my audio receiver has an hdmi output. the driver idt can be used to control the output of the receiver?  I am currently connected to speakers & headset jack, and the only purpose that is to serve the receiver is to amplify the output of the laptop. is it possible to stream the audio output of the receiver through the audio driver of the laptop?

  original title: I am running vista with a driver for version 6.10.6087.0 idt. the hdmi output on this driver can only be used for audio?

  Hello

  ·         What is the brand and model of the laptop?

  ·         Your laptop supports HDMI components?

  I suggest you to contact the manufacturer of your laptop on HDMI audio settings for more information

• I'll buy the iPhone 6s or iphone7 to the Japan is it can also be used when I come back to me sia?

  Can someone tell me until after I bought the phone from the Japan, I still need to unlock, or I can use directly in when I return to the Malaysia? If you need to unlock any which may suggest some good way?

  Carriers lock phones.  Only carriers can unlock.  Contact your operator.  Historically, Japanese carriers have NOT unlocked their phones.

  Best,

  GDG

• Is there a function in LabVIEW that takes the last half of the data (table) which can then be used for the analysis?

  I was wondering if there was something in this direction in LabVIEW to create a shortcut for this, rather than try to hardcode it after the fact. Does anyone know this method I'm talking about? (IEC 60601-2-24 dry 50) Please let me know because I'm fighting here.

  Mark.Eckhoff wrote:

  I have to calculate the index and the length after the fact. I just hope that there may be a simpler solution.

  Well, you can reduce the complexity of the half by computing only the "index" and leave the 'length' of "subset of the table" unwired. If you wire length, the subset is the rest of the table.

  There are also "split table 1 d.

  If it's still too hard, do it once and wrap it in a sub - VI, called for example "SecondHalf1D.VI". Of course, you probably also need a logical deal with cases where the size of the array is not an even number.

• Can what I use for Verticle roll

  Hi all

  Should what I use to do a rollinglike on old televisions vericle.  I I also want to change the direction one do a diaginal or horizontal roller

  Thank you

  You mean that the phase of pumping? Or you are looking for just an old TV effect (bad reception, video)? For the latter, do a Google search. There are a ton of tutorails and presets for her. For a simple phase of pumping, you just move a gradient continuous acrross the screen, which can be done easily with a ramp before compound effect and a tile to move above this one. And until you get too creative, change direction: remember, electrons from the cathode ray travel strictly top down, so any angular behavior is simply caused by the time differential between the lines, not the RADIUS giving a dance limbo or something...

  Mylenium

• What is application window azure, how can I do useful for Xwindows Server? How can I integrate identity window and the window of azure Foundation

  I am doing a project in which I work with Windows server and visual studio.i have implemented like that any computer that belong to the domain connected with window server., if a connection of time first user of this computer, and then the entire application on the intranet without having to connect .it will automatically connect, if a user starts her computer with her password. is it possible with both the concept above.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information helps.

• Update copy, can not be used for any new installation...

  I recently upgraded to vista and I had XP on my D: drive, but I took it because I thought as I didn't need. Now when I try to activate vista it says this key can be used to upgrade... what the _ I'm supposed to do now? It's not like one do not buy...

  Reinstall XP > and then upgrade to Vista XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Can I use a single purchase of Acrobat software on several computers? I'm working on a desktop computer, laptop and netbook.  Do I have to buy several copies or what?  (PS - if I start with a free trial download, how long can it be used for?)

  How many times can I use Acrobat Pro on my three compters - top of desktop, computer laptop, the net accountant.  I have to make multiple purchases?

  Hi markala,.

  According to the end-user license agreement, a single purchase of retail for Acrobat license is good for 2 computers.

  If you want to install it on 3 machines you need to acquire a volume license.

  Kind regards

  Rave

• Satellite L30-115: can find only a single PC Card slot

  Hello
  Are there users L30-115 here?
  According to the description on this site, toshiba has two pc card slot...
  I can't find a ;>
  Someone has L30-115 pcmcia slot?
  Are there different models? : /

  Hello

  I wonder where you found this info.
  I downloaded from the site of Toshiba L30 user manual and there is nothing in the PCMCIA slots!
  According to this document, the PC card slot is placed on the left side, and the PC card slot can accommodate a Type II card.
  Housing supports the 16-bit PC card and Cardbus PC cards.

  I think you have mixed with something and there is only one slot that supports different maps.

• Satellite L300-1AS - specification of PC/Express card slot

  I have L300-1AS under the age of 4 weeks. My quest is that I hope simple? What is the corect for this laptop card specification? the slit is wide 54 "L" shaped I was told that it will take a map 34 or 54 Type?. I asked Toshiba UK technicians and I'm very surprised there lack of knowledge on what I thought would be a simple rquest.

  3rd party sellers want to spec. I live in the hope of a sensible answer. Thank you in advance.

  Hello!

  Have you looked in the user manual?
  You will find information on this topic:

  The PC card slot can accommodate a 5mm (Type II) PC card. Housing supports PC 16-bit and 32-bit CardBus PC card card.

  I hope this information can help you a bit.

  Good bye

• T61 multimedia card slot

  my laptop is T61 7658 CTO with vista. There is no Pc card slot & media card slot.

  Like using on the computer, the SD card can be used in media card slot.

  but I don't know how to install the sd card into the media card slot. the slot looks a little bigger, not suitable for the Sd Card.

  could someone help me?

  Thank you very much!

  
  

• How can I create discs for my recovery to reinstall partition Vista?

  I have a Dell Studio 540 I bought in 2009 which came with Vista 64-bit pre-installed. I do not have the installation discs for Vista but rather has a recovery partition (D). I don't create discs of backup at the time.

  Now my hard drive is about to crash and burn (I get warnings "imminent failure" of Vista and Dell diagnostics). I bought a new hard drive, but I want to know how to reinstall Vista on the new disk once it has replaced my failure one.

  I am creating recovery/OS reinstall disks, but I'm not finding a way. I do not seem to have any Dell backup software for this do and no Datasafe or backup Dell. (My hard drive has been previously cleaned and reinstalled Vista a couple of years ago, when my video card has failed.) Perhaps these apps has reduced to nothing at this point, I don't know.)

  I still have the recovery folder on my (still) works hard drive and also copied on an external hard drive.

  Can someone tell me how to create installation disks so I can reinstall Vista on my new hard drive?

  You have a few options:

  Update product key

  This requires a license to upgrade. In general, you should your old version of Windows installed. There are workaround solutions posted especially for users in the same situation as you, who must replace hard drives, etc. and only have the media upgrade (as most of the systems are medialess now unfortunately). Others require an absolute clean install after formatting with the likes of DBAN to get rid of Virus/Malware infections and do not have the old media. Without these solutions of workaround users would not be able to activate.

  First of all, you can buy the upgrade and use the Digital River to install .iso is useless to make a double (Vista 7) installation. The Digital River .iso image file will allow you to start in the media you created him (USB or DVD - USB recommended). Look at my wiki A clean install of Windows 7, you need to install Windows 7 but do not enter the product key and select ignore when you are prompted to enter the product key.

  The upgrade product key will not directly work with the activation of product however if you follow the instructions in step 11 d - a small solution to workaround using slmgr in the command prompt it will activate without a problem allowing a clean install (maximum performance). As you're installing on an eligible system workaround is perfectly valid and you will be always correctly allowed. Again, it will be to save time sourcing your support Vista, reinstalling Vista/Upgrading to 7 and prevent yield loss of the upgrade from Vista to 7.

  OEM product key

  You can also consider using the generator systems or the version of Windows 7 OEM: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&N=-1&isNodeId=1&Description=windows+7&x=26&y=15

  Its essentially the same as the commercial, but cheaper version and allows a clean install. The only downside is that it is related to the computer, it is first installed on that is it is not transferable.

  Retail product key

  You can also purchase the full retail version, but it is the most expensive choice.

• Someone know where I can find a disk for an older MacBook utility? It seems that Apple can't MacBook since 2007.

  Someone know where I can find a disk for an older MacBook utility? It seems that Apple can't MacBook since 2007.

  If you were able to call Apple support (after-sales applecare or apple?) and ask if they

  can know if you can still buy replacement system installation DVD of restoration for your MacBook

  they could tell you if it is possible if they have your serial number, to look further into it.

  • How to identify MacBook - Apple Support models

  • Find the serial number of your Apple - Apple Support product

  Depending on where you are, some support Apple or Apple Care facilities cannot

  be able to comply with a demand for vintage and filtering software obsolete spare.

  Some models introduced in 2007 started with 10.4 Tiger (with the version of the Intel-based OS)

  and went as far as Lion 10.7.5 as their higher upgrade system. All systems prior to 10.7

  usually included a system restore DVD media kit, gray-label of this Mac-specific disks.

  If you bought the computer in 2007, it may have been a year of construction 2006 model, in order to

  be able to identify the computer model exactly, the discovery of a boot of replacement keys is

  DVD that can also be used to prepare the computer for a replacement of the HDD, etc.. The

  utility disc on the DVD installation-restoration is an important tool; so is the installation disc & software.

  A detail of (if any) the system drive on the computer, if those who took on DVD

  would be a bootable disk utility version in the installation program. The DVD of grey original label

  media can be found in resale, are used or old stock, published initially with a Mac, new.

  Places online like Amazon may be able to provide the specific software package if you knew

  exactly the part numbers your computer had when new on these original discs.

  Serial number of Mac news - your Apple series number search:

  https://www.PowerBookMedic.com/identify-Mac-serial.php

  If you identify a number before contacting Apple computers on-line software resellers

  You may be able to narrow down. In addition, if identify the computer exactly, there may be some

  This time DVD media (exact details, new or used; original gray-replacement of labels, used.)

  And finally, if the computer running Snow Leopard 10.6.8 and he is older than the date of this

  OS X system, you could buy a DVD of Snow Leopard 10.6.3 retail on Apple Store online, to get

  http://www.Apple.com/shop/product/MC573Z/A/Mac-OS-x-106-Snow-Leopard

  the installation program which has a utility disk in the package. You start from the DVD to use these

  utilities include in the installation program. It can also erase everything. If the computer shipped with the

  last supported OS X installed 10.7, who no doubt had a key task to install USB, not a restore DVD.

  Later computers have their built-in OS X Recovery, a partition on the hard drive which has the OS X

  Utilities and a way to go online for the software of system recovery and restore without media disks.

  • U.S. iPod, Mac and iPad technical support: (800) APL - care (800-275-2273)
  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • See all phone numbers around the world
  • http://www.Apple.com/choose-your-country/

  Nothing is as simple as it sounds. the first thing is to correctly identify the computer; If you call

  Apple (depending on where you are in the world), results may vary. their after-sales service or Apple

  Nobody care may be able to help or tell you that they cannot, on the basis of the serial number.

  In any case...

  Good luck & happy computing!

• Can not get address for printer does not accept password

  Went to the eprint centre to save the printer worked fine but when we tried to give address printer so we can send to the remote printer does not accept the password any itry

  MasterBinker, have you tried to use the link you have forgotten the password in the login page for ePrintCenter?  This should send a new password to the email address.

  You can also try using a different web browser.

  Kind regards

  Sean