How can I create discs for my recovery to reinstall partition Vista?

Similar Questions

• How can I create delays for many digital outputs?

  I use a PXI 6537 DAQ card to produce four digital signals for each starting at a different time. In order to create this delay the appropriate number of '0' have been placed at the front of the boolean table before converting it into a digital signal. It works by creating the delay, however using this process, the delay may be discrete increments equal to 1/╔chantillonnage and my card can be up to 50 MHz, this means that I can produce only delays 20ns increments (check my calculations). For my application, I need to be able to control the time until the second nano. Delays will usually be more than 20 ns, but less than 40ns. I tried to use the entry 'to' the 'build waveform.vi' but it doesn't seem to do anything to manipulate the data. The sub VI used to create the waveform is attached. Sending the data isn't a problem. Thanks in adavnce for any suggestion.

  JS

  Hi JS.

  The 6537 allow placement of subsample edge on its i/o lines.  The best you can do is unique (like you the noticed) examples of resolution (20 ns @ 50 MHz).

  Have you looked at the SMU-6545?  It is a 200 MHz Board, which means that you will get 5 placement ns, as WELL as data delay feature which lets you place your samples with ~ 150ps resolution compared to the output clock.

  Are you having to change the location of a signal in the clock period each cycle?  Or is the position fixed by reference to the clock, but must be placed exactly?

  Thank you

  Keith Shapiro

  National Instruments R & D

• How can I create CSS for the editable regions in the documents based on templates?

  I created a template in Dreamweaver CS4 by using their set of 3 columns, header and Footer option available. The model works fine in the browser. I inserted an editable region in the empty middle of the model column. I created a new page based on this template and want to be able to format the text that I entered in the editable using CSS. Any time, I try to create a new CSS rule I get the following dialog:

  "This change should change the code which is locked by a model or a translator. The changes will be rejected. »

  Is it possible to create new CSS, which will apply to the information entered in the regions be modified of a document based on a template? Simple step by step instructions would be appreciated.

  Thanks for reading

  Do not know what is the 'id' of the middle column, but you must target the text inside that

  .

  Example:

  {#whatever}

  color: #639;

  do-size: 12px;

  }

  It is better if the text in the middle column is paragraphs and target you them as as follows:

  #whatever p {}

  color: #639;

  do-size: 12px;

  padding: 0 15px 15px 0 / * top, bottom, right, left * /.

  }

  You must make sure that you include the above in the editable page css region and HE MUST come after any link to the style sheet css main.

  If in doubt post the code for the page here and say what you want to be purple and I'll have a look.

  The tip is stop created with the css dialog box in DW, it's a load of bollocks and started writing some simple css directly in the page itself. It is easier and gives you more control than any interface automated half cooked in the oven.

  Start learning some simple css. There is absolutey zillions of resources on the net. A couple of hours well spent and your miles further. If you keep pressing DW to do everything for you, then I'm afraid you'll just be going around in circles.

  Enter the code and don't be afraid of him, take it apart and see how it works. Slowly step by step and little by little you will realize how simple structures are and how simple css really is.

• How can I create artwork for the printing of the circular labels with text inside. Labels circulars sera.5 inches of diameter

  I need to put in place of the illustrations for the printing of labels that must be circular with a.5 inch diameter. In the circular form, I need to add to the text. Part of the text is to follow the circular shape and a quite normal part.

  I am a newbie in aid of illustrator.

  Probably start here:

  Illustrator help | Creating text

• How can I create password for my document?

  ALo

  Hello

  Password protect a PDF file requires Acrobat Professional or Standard. You can download a free trial of 30 days of www.adobe.com/products/acrobat.html if you want to test.

  Please let us know if you have any additional questions.

  Best,

  Sara

• How can I remove Windows 8 Preview Release and reinstall Windows Vista?

  I had accidentally Windows 8 Preview Release.  I need to go back to my old screen.

  I've been using Windows Vista. This afternoon, after that my grandson was at the computer, I found that I was in a consumer Preview 8 Win.  I need Vista in my program.

  Hello

  You need to reinstall Vista.

  Vista not a program;  It is an operating system that supports the delivery of programs.

  Windows 8 is a later tested Windows operating system.

  Here are the various ways to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery discs, if you have never received a recovery disk when you purchased your computer, or you're made recovery disk...

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Installation of Windows 8 could destroy this option of relocation:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How can I create my own recovery dvd

  I just got my laptop T61 with Windows XP operating system.

  How can I create my own dvd recovery and how long will it take?

  Click START; ALL PROGRAMS; ThinkVantage; Create recovery media

  I thnk it took me about 20 minutes or more to complete.

  See you soon!

• How can I create a full recovery for OS and preinstalled software media?

  Hello
  My son´s accompanying the new Satelite L855-10U preinstalled OS and much other software already installed on the HARD drive, but no installation media, the client is supposed to create a tool from Toshiba.

  I created 6 Swedish recovery for the operating system using the tools Toshiba had installed on the HARD drive.

  To do this 6 Swedish, I created with the Toshiba Recovery tool contain the operating system and all other preinstalled software?

  How can I create the installation media full and usable if not for the operating system and all other preinstalled software?

  I can´t find all the information on the backup software pre-installed with the exception of the BONE. Is there complete information how to do the above, in the manual of the computer, or have you missed this information?

  I would like to know how I can create media backup complete and usable for the operating system as well as for all other preinstalled software, so I can recreate all the facilities of the plant at a new disk if/when the original HARD disk crashes.

  Is there a partition hidden with pre-installed software, and if so, how can I create a backup of this partition, or all the software, so I can reinstall everything if the HARD drive fails, if it is already not with the Swedes 6 Toshiba tool created for me?

  Forward to your response and to complete your customer documentation about the complete instructions for installation and recovery media creation.

  Thank you very much!

  Baltazar

  Hello

  On this forum, you will find a lot of useful comments on the recovery image saved on the HARD drive and its operation to the facility and the creation of recovery disks.
  All this is clearly and simply.

  Front of Toshiba offer new people for laptop in software development create recovery image. This recovery image will be created for each laptop model (specific hardware configuration). Recovery image contains the operating system, all necessary drivers, tools/utilities Toshiba specific and some other software like DVD/Blu-Ray, Microsoft Office test drive and the antivirus application. With this configuration every laptop owner can begin to use the laptop without having to install important applications.

  This package is then saved on the HARD drive and can be used for the installation of HARD drive recovery - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm. In other words, if something is wrong with HARD drive recovery facility you can reset the preinstalled operating system and reinstall recovery imae. After that make you have absolute same settings you had after purchase and first start of the laptop.
  HARD drive recovery image can not be used if:
  -HARD drive is defective
  -you have installed the version of the own BONE
  Structure of the HARD disk partitions - is changed
  Recovery image - HARD drive is deleted or moved to another partition or copied to the external device.

  To avoid all this Toshiba recommends the creation of recovery disks. Using these disks, you will be able to install the OS on the new drive HARD or in any other situation listed above.
  Please note: the use of recovery disks will remove all HARD drive, create the new recovery partition and install image recovery, so you still have the same settings.

  I hope I can help you with my explanation. If you have any other questions you are welcome.

• How can I create a set of installation / recovery discs?

  Right now, my computer works well with Windows XP, SP3.  How can I create a set of installation / recovery discs?

  I have the original series OEM number upwards, but have more discs - do I need something else before I start?  Can I make my own computer?

  Right now, my computer works well with Windows XP, SP3.  How can I create a set of installation / recovery discs?

  I have the original series OEM number upwards, but have more discs - do I need something else before I start?  Can I make my own computer?

  http://www.ehow.com/how_4797051_burn-Windows-XP-recovery-disc.html

• Satellite L350: How can I create my own recovery disk

  How can I produce my own system recovery disk?
  Windows system keeps asking for a disk system that I don't

  Any advise?

  Hello

  I put t know what you mean exactly?
  You can create a clean Toshiba Recovery disk using the Toshiba recovery disc creator software.
  Its preinstalled on your laptop and after the creation of the recovery disk you can use for installing the OS.

  The Toshiba Recovery disk will NOT request a floppy disk!

• NB100 - How can I create a recovery on a USB CD?

  Hi friends,

  I recently got a NB100 with XP home. The operating system has been reinstalled and did not have any CD of the operating system.

  Given that I have not an external CD drive how can I create a recovery on a USB CD. I would like to see the function of USB USB just like the CD in case something really goes wrong.

  Can some help me to find a tutorial to do this?

  Thanks for your help.

  SAJ.

  Great! Thanks for sharing this with us!

• I have problems of space on my iPhone 6. I have only 21 photos and 2 videos on my phone. However, I am on a discussion group on whatsapp. How can I create more space for my phone? I also have very few applications on my phone.

  I have problems of space on my iPhone 6, I have only 21 photos and 2 videos on my phone. However, I am part of a chart group on whatsapp. The problem now is that my storage space is almost full. How can I create more space for photos and everything?

  You cannot create more space for everything.  All you can do is remove apps, photos and especially videos to make room for other pictures and videos.

• How can I create a language pack for Windows 7?

  How can I create a language pack for Windows 7

  No! You can use the language packs provided by Microsoft. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Hi, I bought a windows xp disk Professional Microsoft a few years ago but never used it how can I cd key for the disc

  Hi, I bought a windows xp disk Professional Microsoft a few years ago but never used it how can I cd key for the disc

  If you bought a copy the retail of Windows key should be included in the box.

  How to get a replacement product key

  Retail Windows:
  If you have lost a product key for the software you purchased separately from your computer, or if your product key does not work, call Microsoft. To locate the phone number, visit the following Microsoft Web site: http://support.microsoft.com/default.aspx?scid=fh; CNTACTMS

  A fee may apply for lost keys.

• How can I create a bootable for XP home CD

  How can I create a bootable for XP home CD?

  If by chance you reinstall xp sp2 via cd, you can create a bootable cd of xp sp3 via a method called "slipstreaming".

  It is relatively easy and requires files sp2 from your cd to merge with the update to sp3 from microsoft, and then make an iso to burn it to a cd.