A password is adjustable to apply after a field on the PDF form entry?

Similar Questions

• Person contact as after that fill us the application form.

  Hello.

  We fill form to Adobe Primetime but not a single contact us after 2 or 3 weeks.

  We try to call the Russian Office, but the phone does not work.

  How can we get access to Adobe Access DRM?

  Best regards

  Roman.

  Hello Roman,

  Sorry about that.

  You can send me your details (email, Tel No, company information, etc.) for me ( [email protected] ) directly?

  I will forward information to the businessman.

  Thank you

  Hiroshi

• How to password protect a field in a PDF form?

  Hello!

  I am a novice in Javascript from Adobe, so I really have a hard time trying to figure out what to do with the code that I have.

  I was able to find a code that changes the attribute of read-only on the BLUR field. Here is the code:

  Event.RC = true;

  If (! event.willCommit & & event.value! = "")

  {

  Event.Target.ReadOnly = true;

  }

  But now I need a code that prompts the user for a password ON FOCUS if the field has an entry, so it changes the back to be editable field.

  I found this code, but don't know how to edit:

  var cResponse = app.response({)

        cQuestion: "How are you today?", 

             cTitle: "Your Health Status", 

             cDefault: "Fine", 

             cLabel: "Response:"

   });

   if (cResponse == null)

        app.alert("Thanks for trying anyway.");

   else

        app.alert("You responded, \""+cResponse+"\", to the health " 

             + "question.",3);

  I thought he might start by:

  Event.RC = true;

  If (event.value! = "")

  {

  }

  And then I change the CTitre, cLabel, cDefault and app.alerts accordingly. But I don't know how to add the line of code and the password to change the attribute of ReadOnly = false field.

  Any help will be very appreciated!

  It is not clear to me what conditions you want to prompt the user for a password, but if you rename fields as follows:

  InitialDOmgLRow.1, InitialDOmgLRow.2, InitialDOmgLRow.1

  What follows will do if none of these fields are empty:

  var oFields = this.getField ("InitialDOmgLRow") / / extract the domain object

  Invoke the var = oFields.getArray ();  Get an array of field objects

  {If (invoke him [0] .valueAsString & invoke him [1] .valueAsString & {aFields [2] .valueAsString})}

  var cResponse = app.response({)

  cQuestion: "enter the password."

  CTitre: "Quality Assurance."

  bPassword: true,

  cDefault:

  cLabel: "password:".

  });

  If (cResponse == "password") {}

  oFields.readonly = false;

  } Else if (cResponse == null) {}

  App.Alert ("please contact responsible for Quality Assurance.");

  } else {}

  App.Alert ("Incorrect password");

  }

  }

• How to edit PDF form fields after registration

  I am very new for PDF forms and thought I was getting better.  I'm create forms of Word documents and need to make frequent changes to the PDF form after that I have recorded because I'm still learning.  I thought I read somewhere that you should be able to change the properties of a field after saving a copy, but that did not work.  I forgot to uncheck "Ahmed multi field" and the need to set in my text boxes but I can't change.  I continue to recreate the formula over and over again on the Word doc.

  Hi Ally1286,

  Save a copy, it is required to change the form when you have distributed the form or registered as a Reader extended PDF. In this case, if you want to add scrolling functionality to a tool to "Prepare the form" field then go in (in DC) to the title of the Toolbox on the right.

  

  On this screen, select the file and click Start. Double-click on the field and go to the 'Options' tab check the appropriate box.

  Let me know if it works for you.

• AFTER TWO MINUTES OF INACTIVITY, I AM BACK TO WHERE I LOG IN AS A USER AND ENTER MY PASSWORD AND THEN TAKES ME TO ANY PAGE OF THE APP I WAS USING

  AFTER TWO MINUTES OF INACTIVITY, I AM BACK TO WHERE I LOG IN AS A USER AND ENTER MY PASSWORD AND THEN TAKES ME TO ANY PAGE OF THE APP I WAS USING

  AFTER TWO MINUTES OF INACTIVITY, I AM BACK TO WHERE I LOG IN AS A USER AND ENTER MY PASSWORD AND THEN TAKES ME TO ANY PAGE OF THE APP I WAS USING

  Hello

  Click on desktop and select Customize.

  Click the screen saver icon on the bottom of the window.

  In the window of the screensaver, remove the check mark from the résumé shows the lock screen.

  Click Apply/OK.

  Explanation:

  Even if a screen saver is not enabled if you select the summary option, the system will automatically display the lock screen when the idle time is reached.

  Concerning

• After that I changed the apple ID password I can not connect to facetime

  After that I changed the apple ID password, I can not connect to facetime

  Update your password for Facetime, too.

• All content tiles missing and integrated PDF reader and password manager no longer works after update to 34.0

  Hello
  After that I updated to 34.0 on OSX 10.9.5 (auto update comprehensive), I noticed that all of the content of the tile is missing. Before the update, I have seen a lot of tiles when I open a new tab. Even after a few navigation, no content appears (I see only an array of blank tiles). I went between white classic, bright, cooler. No effect.

  In addition, integrated in the viewer PDF does not work. All the time I click on the pdf link, I see the window to download the PDF with the title "enter the name of the file to save on...» ». Before the update, PDF Viewer has not worked, no problem. After that I noticed the problem, I checked that the preferences-> requests and confirmed that the action to the 'Portable Document Format (PDF)' content type is set to "Preview in Firefox".

  In addition, Manager of integrated password also stopped working. He remembers no new password. It provides no password already known on the site where he provided automatically the account and the password before the update. I checked the preferences-> Security-> saved passwords. There are a lot of passwords to remember (remember before the update).

  I re - install the firefox manually. It does not help.

  Can someone help me? Is there any information I can provide to sort my problem?

  You can check for problems with preferences.

  Delete possible user.js and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I want to be the format of my hard drive, but have a backup copy of the information of Firefox and passwords and bookmarks so retrieved after formatThank you

  I want to format my hard drive, but have a backup copy of the Firefox information and passwords and bookmarks so recovered after format
  Thank you

  To save bookmarks, see restore bookmarks from a backup or move them to another computer

  If you want to save passwords, you must use an extension like password exporter. It is located at https://addons.mozilla.org/en-US/firefox/addon/2848/ .

• Request for BIOS password after trying to wipe the hard drive?

  Hi - I got a new computer and tried to erase the hard drive on my old Toshiba laptop for sale on. It is a Toshiba A-210 and is about three years old.

  I put the "settings factory restore disk" and tried to follow the instructions on the CD cover. However, the instructions don't match the options given, I did something where I thought I was wiping the HARD drive. It seemed to go ok, but when I tried to start it again, it loads a black screen type "MS-DOS" asking for a password.

  The password only I put up on the computer was for my user profile, and it's not accept that. If I try to go on without the password, the computer turns off.

  I tried Googling and it could be a BIOS password, I think, but I've never been one of these. The only suggestions I could find for fixing involved by pressing one of the buttons "F" and move to Windows, but I can't get an answer using the 'F' keys On the Toshiba site it said that I needed to have it fixed by one of their authorized places, but I don't want to spend money on it, because I was trying only to erase the hard drive before trying to sell it on or scrapping it.

  Does anyone have any suggestions? My hard drive was erased? There is nothing really confidential there, but I like it as clear as possible, I really don't mind if its working, I would consider it breaks to pieces.

  Post edited by: katy_c

  Hello Katy

  After reading your thread I don't understand what you've done to lock your computer.
  Still is it BIOS password cannot be set by mistake.

  When the BIOS password to settle should be written twice before, it will be activated.

  What to do now? Is that the BIOS password can be deleted by a combination of keys or something simple. BIOS password is the most important safety feature and must offer the maximum protection of the BIOS.
  You can sell your laptop without HARD drive too. On eBay, I saw many laptops that will be offered without HARD drive for data protection reasons. HARD drive can be exchanged for less money and it is not so important hardware component.

  In the history I see a problem only: BIOS password. You can offer a little cheaper laptop and the new owner can pay for password removal.

  It is not easy to give you the right answer. I just want to be a little more realistic.

• You can help me too? The key that I receive after you have entered the wrong password 3 times is 52309445

  You can help me too? The key that I receive after you have entered the wrong password 3 times is 52309445

  You can help me too? The key that I receive after you have entered the wrong password 3 times is 52309445

  You can help me too? The key that I receive after you have entered the wrong password 3 times is 52309445

  try to enter

  43061481

• How to enable password protection in windows xp after disableing it

  How to enable password protection in windows xp after disableing it I disabled it and now I don't have to reverse the trend.

  Hello

  ·        What password are you referring, passwords, or any other application?

  If you're referring to passwords, then follow the steps mentioned below.

  a. Click Start, and click Control Panel.

  b. click on user account and click on your username.

  c. click password to create and then create a new password.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  You get the error "a Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved" when the requesting computer (the computer 'demand' help) sends its private IP address instead of its public IP address in the request for assistance. The solution is 'easy' for some and difficult for others. I present here for your perusal:

  (1) obtain the public IP address of the requesting computer (by visiting a web page such as http://www.whatismyip.com)
  (2) save the remote assistance request computers
  (3) modify the remote request for Assistance (RcBuddy.MsRcIncident) using a text editor (such as notepad) and replace the private - section of IP address should be something like this:
  RCTICKET = 65538,1,192.168.1.33:3389 «»
  with the public IP address from whatismyip.com or elsewhere - should be something like this:
  RCTICKET = 65538,1,74.125.47.147:3389 «»
  (4) save the file of RcBuddy.MsRcIncident 'new '.
  (5) double click it to connect to the computer needing help
  (6) cross your fingers and hope it works!

  I hope this helps someone else - if it's too much trouble, feel free to use the tools mentioned elsewhere in this thread.

  -Computers Acorp
  www.ACoRP.net

• Portable keyboard on Vista you will sign in with my password, but will not type after that

  * Original title: keyboard on my laptop computer vista will allow me to connect with my password, but will not type after that. I use a screen keyboard and mouse to this type. I even restored to factory settings. Always won

  My keyboard on my computer vista laptop will only sign in with my password, but will not type after that. I use a screen keyboard and mouse to this type. I even restored to factory settings. Still will not work. Checked ease of access settings and language settings, running of ideas. I tried another keyboard, failed to mention. Re-installed drivers as well. Any help would be great.

  Thanks for your reply. I tidied up my lap top for about 5 months and just used my office for awhile. One day I was in the mood to tinker around with my lap top, then when I turned it back B I N G O!  My main advice worked again. Matter of fact, I use it now. Thank you for your effort in the e-mail back me on this issue. good karma can follow you anyway yoy travels take you.

• Deploy and host not applied after you restart car profiles

  Just started playing with Auto deploy and profiles of the host, all of this work have to expect one thing.

  The profile of the host is not applied after you restart, the profile is selected but not applied.

  If I choose 'Apply the profile' Server applies the profile, take this into maintenance mode and it works as it should.

  This should not happen automatically after reboot? And what files newspapers can I look to fix this?

  Any help would be appreciated.

  Yes. You can attach a profile - even if the host is a host running VMs - worms and you can take a look if it is already compatible or not, before it is put in maintenance mode and apply the profile settings. You can even attach a profile to a cluster if you do not need to click on all hosts.

• Surface RT - password simple features are disabled after mail to office 365 activesync / Exchange with a strong policy cannot use the simple password on device after removing

  I have synced to office365 using mail app and clicking next without letting go I would turn off the simple password feature to connect to surface RT.

  Now I get guest password windows live to connect to my device of surface. (before I used a simple PIN password function)

  I deleted the account office365 from the device and rebooted.

  However, under accounts - sign in options. time characteristics of simple password:

  • Password PIN
  • Picture password

  are both greyed out

  And I can't re enable them, even if the ActiveSync account is no longer connected.

  I also modified the device policy mobile office365 to allow simple passwords. and I tried to connect and you reconnect to the e-mail account in the hope that less stringent policy would somehow find its way to the peripheral surface of RT.

  However, the peripheral surface RT does not restore the original settings.

  How can I reset the surface RT have a simple PIN password again?

  Hello

  -What version of Office 365 is installed on the computer?

  I suggest you to reset the security policies and check if that helps.

  1. press on the Windows key + X.

  2. click on the control of security for the family and Panel\User accounts-user accounts

  3. on the left side, you will see "reset security policies" link.

  4. click on reset security policies , and then click OK in the confirmation box.

  You should now be able to install Picture passwords or password PIN again.

  Please, an update of the results. We will be happy to help you further.