a point could not be updated

Similar Questions

• HP 15-r017tu: could not all updates by cancelling changes

  The other night when I stopped my laptop it says he was 160 updates, so I let it go. Then when I turned on my laptop today he said that loading updates. It takes about 30% and now it says that we could not all updates, undo changes do not shut down the computer. It has been like this for 6 hours and I need to use my laptop for uni

  can someone tell me please how to fix this problem without losing all my work together from my laptop

  Hello
  
  Either the hard disk must be at fault or OS for corrupt or maybe it's just a few updates of Windows at the origin of the problem.
  
  You can do a system restore to a well known state previously.
  See the section "restoring your computer when Windows cannot start normally" here - http://support.hp.com/us-en/document/c03327545
  
  But first do a complete hard drive - fast and wide test first from the BIOS:
  http://support.HP.com/us-en/document/c03467259
  
  You have the support of recovery with you?
  
  If the HARD drive has FAILED, you must replace it.
  
  If the HARD drive had failed, I suggest that you change the automatic update of Windows from the control panel to "Automatically check for updates but let you choose to download and install them or Not" next time after you do a restore. Be sure to restore to a point at least 48 hours before the problem started.
  http://www.eightforums.com/tutorials/5794-Windows-Update-automatic-updating-turn-off-Windows-8-a.htm...
  
  Maybe some update is the cause of the problem.
  
  Next: run a scan of the file system - Option 2 in this tutorial:
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html
  
  Restart the system.
  
  Then, run the commands dism, account required to Option 1 in this tutorial:
  http://www.eightforums.com/tutorials/26512-DISM-fixing-component-store-corruption-Windows-8-a.html
  
  Restart the system.
  
  Now, you manually install the update to Windows I'm matches of 5 instead of as a whole.
  
  Restart the system after each batch installs.
  
  Note: Completely disable/uninstall all Antivirus software from your system all the while.
  
  Concerning
  
  Visruth

• Windows 8.1 message 'you could not complete updates, by undoing the changes, do not turn off your computer.

  Greetings,

  I installed updates in my Windows 8.1 partition.  Then he asked me to restart the computer, and the message "we could not finish updates, exchange loss, do not turn off your computer" appeared and was on-screen for hours.  I thought to reinstall bootcamp but I have software in the Windows partition that cannot be recovered.  I read that one of them starts Windows in 'Safe' Mode, but this is not possible. I use a MacBook Pro (retina, 13 inches, early 2015) OS X 10.10.5

  How can I fix this without wiping the Windows partition and lose my software?

  Thank you!

  Have you created a Windows system restore point before the upgrade?

• Cannot install Internet Explorer 8, error: the ENCODEPOINTER procedure entry point could not be located in the DYNAMIC LINK LIBARARY KERNEL32.dll.

  Original title: the ENCODEPOINTER procedure entry point could not be located in the DYNAMIC LINK LIBARARY KERNEL32.dll.

  PACKAGECUSTOMIZER. EXE-

  I just built this computer and Windows XP support.  In order to use IR, I needed to update in softtware.  The following error messages we received during the download process.  The procedure entry point ENCODEPOINTER could not be located in the DYNAMIC LINK LIBARARY KERNEL32.dll.  It is one of the error messages that I received everything trying to downloand IE8.  The other was: SHREGGETVALUE W procedure entry point could not be located in the DYNAMIC LINK LIBARARY SHLWAPI.dll.  Because of these two errors, the software was never fully charged.

  What are these codes and how can I fix them?

  Hi CharlesPortillo,

  Follow the steps in the article.

  How to install Internet Explorer 8

  How to solve Internet Explorer 8 installation problems

  For reference:

  How to solve problems when you install or uninstall programs on a Windows computer

• Get the error when update: Office creative cloud could not be updated. (error code: 2)

  Get the error when update: Office creative cloud could not be updated. (error code: 2).

  I'm on a McBook Pro, OSX 10.9.5 retina.

  How to fix error Code: 2?

  Always the same?

  Follow the procedure below:

  Please follow the steps below:

  1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  2)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  3) click on the link below and download file Creative Cloud install and use the same to install the creative Cloud Desktop application.

  https://creative.Adobe.com/products/creative-cloud

• Procedure entry point could not be found

  I installed the trial version of PS CS6 on my Windows XP, but when I try to open the program I get an error message saying procedure entry point could not be located. How can I fix it if I can use the program?

  Photoshop CS6 requires Windows XP SP3.

  http://www.Adobe.com/products/Photoshop/tech-specs.html

  Is that what your XP to update? May be running SP2?

• get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  Hello

  You can try to install the latest version on the current: https://www.mozilla.org/en-US/firefox/new/

• When you try to load a game on the Internet I get this error - entry point decode pointer could not be located in the Library dynamic link kernel32.dl

  Original title: need help please

  Please help me I've tried for hours just can't find it try to load the game from the internet charge just before its opening, he said
  error entry point decode pointer could not be located in the Library dynamic link kernel32.dll also tried to download directx said same thing for me
  Please help me thanks
  p

  Hello

  I suggest you try to run the System File Checker
  http://support.Microsoft.com/kb/310747

  It will be useful.

• Restore point could not be created

  I tried to create a Point of restoration, but in vain.

  Error measage: Restore Point could not be created for the following reason: access denied (0x80070005).

  I am logged on as administrator, why I can not create a restore point?

  Hello Paul0246,

  Thanks for posting your question on the Microsoft answers Forum.

  We will try to the simple troubleshooting step: turn off System Restore, then turn it back on. This will delete all existing restore points.

  How to disable the system restore in Windows Vista:
  http://bertk.MVPs.org/html/disablesrv.html

  Don't set system restore to monitor other than readers that what is installed on Windows.

  Have you tried to add your account to the list of permissions for the directory of system restore, etc. If this does not work, then try to disable user account control and see if that is the question.
  To disable UAC

  1. Click Startand then click Control Panel. In Control Panel, click user accounts.

  2. In the user accounts window, click user accounts.

  3. In the user accounts tasks window, click turn on UAC enabled or disabled.

  4. If UAC is currently configured in Admin Approval Mode, the user account control message appears. Click continue.

  5. Clear the check box use User Account Control (UAC) to help protect your computer , and then click OK.

  6. Click restart now to apply the changes immediately, or click restart later and close the user accounts tasks window.

  If disable UAC does not help with the creation of a system restore point, try the following:

  (1) put in place a start-up in minimal mode and see if a 3rd party program or software may interfere with the system restore point.
  Follow the article below for instructions on the msconfig configuration (clean boot).
  KB 929135 - how to solve a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  (2) turn off the anti-virus and try to create a system restore point. I would also try to uninstall too.

  Please reply back and let us know if any of these steps has contributed to your question or if you still need help.

  Sincerely,
  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the upgrade to Windows Windows 7 10 and get the message 'could not be updated. "portable

  Original title: Windows 7

  I have 2 questions-

  I have a laptop Windows 7 when I tried to update Windows 10 received a message that it could not be updated.  Has there never been a solution or an update for those of us who have a version of Windows 7 which initially could not updated for Windows 10?

  I have a computer I upgraded Windows 10 and really like it.  I do not understand that I can not make a copy of 10 Windows on a computer, I've updated for Windows 10.  Is it possible for me to download a copy of Windows 10 on my laptop Windows 7 to make a restore CD in the case of a computer problem?

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

  You also have the possibility to choose 'Keep personal files only', which guarantees a successful in most cases installation.

• "We could not all updates. Undo changes. Do not put your computer. »

  Hello. So about five hours ago my laptop rebooted Windows 8 automatically do an update.

  Everything was fine and when it got to 100% it restarted again and does the same thing, but after that he came with "we could not all updates. Undo changes. Do not turn off your computer. »

  I probably read each article on the same problem that others have had with this and they all say the same thing.

  I tried to get my advanced options, but it doesn't do anything that it just goes back to the same message.

  I know what he does not say so, but I turned my computer off and waited a few seconds before turning on again, but still nothing.

  Can someone help me please? :/

  Hello

  Thanks for posting your query on the Microsoft Community.

  Thank you for details on the issue and we will help solve you this problem.

  I suggest you try the methods and check them off below if it helps:

  Method 1:

  Please see the following Microsoft article and try the troubleshooting steps.

  https://support.Microsoft.com/en-us/KB/2700567/en-us

  Note: Do not attempt the steps to update your PC.

  If the problem persists then follow the method below.

  Method 2:

  I suggest you to refer to the following Microsoft article and perform troubleshooting.

  http://support.Microsoft.com/kb/949358/en-us

  Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of Kb to start the computer in normal startup after's article have solved the problem.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  Thank you.

• "Window could not find updates. Error (s) found: Code 80244018. Update the window has encountered a problem.

  Hello!

  I found the error in my system, "window 8.

  The message that is displayed when the search for updates,

  "Window could not find updates. Error (s) found: Code 80244018. Upgrade from window fell on a problem".

  To get help on this error, no feedback is provided by help and support section as well.

  Please help me solve this problem

  Concerning

  Generally attributed to a proxy server or a firewall.

  See the info here:

  http://answers.Microsoft.com/en-us/Office/Forum/officeversion_other-OneNote/i-cant-install-one-note-app-for-surface-RT-error/4737171e-6fce-48f6-88d1-8c44ac0e6ae0

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_store/cannot-upgrade-to-Windows-81-error-0x80244018/56c64112-d374-40Cf-B1B1-8c4fd4924d69

  Discussion:

  http://social.msdn.Microsoft.com/forums/en-us/a8c813ab-5b18-482C-82c4-12f1cc57b460/what-issue-is-attributed-to-error-code-0x80244018

• Creative desktop cloud could not download update, error code 1002?

  Creative cloud could not be updated, the error code 1002.

  Could not find this error on the Adobe Web site.

  Can anyone help?

  Hello

  Please refer to the procedure below:

  If you are using MAC:

  1-force Quit the sub process in the same sequence as shown below from Activity Monitor: see, use the monitor activity on your Mac - Apple Support

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • After that, everything that said adobe on it do a force quit for her

  2 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (it will open the folder of the user's library.)

  3. browse to the Application Support > Adobe > trash OOBE folder and folder AAM Updater

  4 - CUT any installed security software with firewall system.

  5 - go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change this anywhere (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  6 - restart the cloud creative app and connect

  If you use the WINDOW:

  1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • After that, everything that said adobe on it do a force quit for her

  2 - C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  3 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  4 - raise the cloud creative app and connect

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• Creative office cloud could not be updated. (Error code: 2)?

  Creative office cloud could not be updated. (Error code: 2)?

  first of all, disconnect, then back to your application of cc and retry the update, http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  If this fails, close your cc app and then re-open and retry the update.

  If this fails, restart the computer, log out and then back and update.

  If this fails,

  Delete the file OPM.db and reconnection in the desktop application of creative cloud using the Adobe ID associated with your subscription.

  Mac OS: You can locate the file OPM.db in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user library folder, see library user access hidden files. Mac OS 10.7 Lion.

  Windows: You can locate the file OPM.db in the \Users\\AppData\Local\Adobe\OOBE folder.  To show the hidden AppData folder, see view files, folders, file name extensions. Windows XP, Vista, Windows 7.

• I have a problem downloading the complete costume. Only 41% downloaded and it says this "Creative Cloud desktop could not be updated. (Error code: 50) Contact Customer Support

  I have a problem downloading the complete costume. Only 41% downloaded and it says this "Creative Cloud desktop could not be updated. () Error code: 50) Customer Contact

  Meresianak73703965 you use the steps listed in the "failed to install" error Creative Cloud Desktop application to reinstall the creative Cloud Desktop application?