Restore point could not be created

Similar Questions

• After the restoration of XP Pro (to an old restore point) could not load sp2 or sp3

  Restore point after having to restore the operating system (XP Pro) to my lap top, the version is very old. When you attempt to add sp2 (I think there sp1) I was unable to get the correct version and are not able to move to sp3. Is it possible to get help with this. The automatic doesn't work and try to pick it up on mine did not work... any help would be appreciated. Thank you

  Use another PC. Download on a USB key. Then, you will have your file. :-)

• Error: "no restore points could be created for an unknown reason."

  original title: inoperable. Windows Vista system restore

  My system recovery, restore cannot create any requested restore point after that execution and by completing the order followed with pop - up box describing that no restore point could not be created for some unknown reason.  Help, please!

  Hello

  1. you are making a system image backup or you try to run the system recovery options system restore?

  2 are you try to create a restore point manually?

  3. at what stage you receive the error message?

• Cannot create a backup, error: "a snapshot could not be created."

  Original title: computer backup

  When you try to back up my computer, I get a message that says "a snapshot could not be created. Storage insufficient to create the shadow copy storage file. My D drive shows that it is full. Can I format drive D I can backup?

  Hello

  The D: partition is normally your recovery partition that you do not touch with the exception of the enumerated grounds.

  You don't tell us the size of your D: partition.

  There are between 5-15GBs, is the recovery partition and read more:

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  How to save properly:

  If you want to do a complete PC Backup or only a backup of files, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files.

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  http://www.home-PC-help.com/windowsvistabackup.html

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  See you soon

• A snapshot could not be created. Check the event logs application VSS amd SPP for more information. Details: the specified object was not found.

  I get this message to 5 seconds after attempting to back up using a Seagate external hard drive. The drive has plenty of space (1 TB) and is formatted NTFS. System recognizes no problem when I Plug and I can move files to and from it no problem otherwise.

  No other thread does deal directly with this version of the problem (with the object "not found"). Any help or ideas are appreciated.

  Hello

  This occurs generally when the Volume Shadow Copy service and SPP services are not started. We will analyze and identify the cause of the problem.

  I suggest you perform the steps mentioned by "Diana D replied October 23, 2010" to a similar discussion.

  Reference:

  snapshot could not be created Details: the specified object was not found.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/shadow-copy-could-not-be-created-details-the/a55057f8-67ed-4FA3-b61e-15f8904aaba1

  Note: Make sure you put in road security software and Windows Firewall later once you are finished with the test.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  See also:

  Back up and restore frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Hope this information helps. Response with status so that we can help you.

• Key USB Bootable Bootcamp could not be created

  Hello, I am trying to install windows 10, I downloaded the iso from microsofts website and already got bootcamp on my USB support software, I tried to install windows with iso 10 but it says "Usb bootable stick could not be created" then under it, he says that he only supports versions 7 or later version of windows , so I assumed it was my iso image, so I Re downloaded and it did not work, I did remove and eject my time of mutiple iso image, reboot, I thought maybe I should reinstall bootcamp but know too much what the problem is. Help, please!

  Hello hawkstrattus,

  Thank you for using communities of Apple Support.

  I understand your message that you are not able to install Windows 10 on your MacBook Air. From your post, I see you're under OS X Lion mountain. Windows 10 requires OS X Yosemite or later. You can upgrade your software on MacBook Air. The following article contains additional information about the system requirements:

  Use 10 Windows on your Mac with Boot Camp

  Best regards

• Your bootable USB key could not be created

  "Your bootable USB key could not be created.

  Hey guys,.

  I Googled what to do about this error message and all I got was to ensure that the ISO is disassembled. I did, and yet I still get the same exact error message. I'm trying to get Windows 7 Home Premium on a 2012-13 inch Mac Book Pro. I also use a flashdrive 16 GB for the ISO image. Any ideas on how to solve this problem?

  Please read: create an ISO image for the Boot Camp Windows installation media.

• get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  Hello

  You can try to install the latest version on the current: https://www.mozilla.org/en-US/firefox/new/

• "Your bootable USB key could not be created there is not enough space available on the disk.

  I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?

  MacBook Pro (retina, mid-2012)

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  Use a 8GB drive.

• Toshiba 1 TB Store 'cannot copy '. "the file or directory could not be created.

  I am trying to transfer a little less 5 GB 36 996 zip data files on a network drive on my brand new Toshiba 1 TB drive. I created a directory "E:\TOSHIBA\2008-Dec" in the root but only 16386 files copied. If I try to copy files over I get windows error message "Failed to copy" "file or directory could not be created.

  Obviously the disk space should not be a problem. Any ideas? Thank you.

  What happens if you try to copy another file on the HARD disk that is larger than 5 GB?

  What file system you are using on the external HARD drive? Maybe you should try to reformat to NTFS.

  In addition, you should try another cable.

• new port could not be created. : Windows XP 0000

  After you install a MX870 on my wireless network, I installed the drivers from Canon, etc.. The Canon program detects the printer on the net and when I click on connect, I get the message "new port could not be created.: 0000"

  It comes to my office, connected to my router by ethernet. Everything else works OK. I have connected my loptop using the same software but thru the wireless connection and it prints well. I also have an old printer connected to a port of regular printer to my desktop.

  I use XP 32. Its current on updates.

  Help, please.

  Hi JimMathis,

  Try the steps mentioned below and see if it helps.

  (a) click on the Start menu , and then click Printers and faxes

  Right-click on the printer Canon MX870 b), and then select Properties

  (c) go to the Ports tab and make sure the Canon BJ network port is checked.

  Note: If Canon BJ network port is not checked then you will need create the port.

  (d) click on Add Port> button and select the type of "Canon BJNP Port".

  (e) the Canon MX870 printer will be automatically associated with this new port.

  (f) click OK

• Cannot install Internet Explorer 8, error: the ENCODEPOINTER procedure entry point could not be located in the DYNAMIC LINK LIBARARY KERNEL32.dll.

  Original title: the ENCODEPOINTER procedure entry point could not be located in the DYNAMIC LINK LIBARARY KERNEL32.dll.

  PACKAGECUSTOMIZER. EXE-

  I just built this computer and Windows XP support.  In order to use IR, I needed to update in softtware.  The following error messages we received during the download process.  The procedure entry point ENCODEPOINTER could not be located in the DYNAMIC LINK LIBARARY KERNEL32.dll.  It is one of the error messages that I received everything trying to downloand IE8.  The other was: SHREGGETVALUE W procedure entry point could not be located in the DYNAMIC LINK LIBARARY SHLWAPI.dll.  Because of these two errors, the software was never fully charged.

  What are these codes and how can I fix them?

  Hi CharlesPortillo,

  Follow the steps in the article.

  How to install Internet Explorer 8

  How to solve Internet Explorer 8 installation problems

  For reference:

  How to solve problems when you install or uninstall programs on a Windows computer

• Error.' c:\docume~'\earl\locals~1\temp. A temporary file needed for initialization could not be created or cannot be written in ' when try to run 16-bit programs in windows xp computer at home.

  original title: 16-bit windows subsystem error

  I was able to run 16-bit programs on my computer with windows xp home edition. now when I try to open the program I get a 16-bit windows subsystem error. c:\DOCUME~'\earl\locals~1\Temp. a temporary file needed for initialization could not be created or cannot be written to. Make sure that the path exists, and the space is 'close' to teminate the application available.choose

  Hi EarlBettencourt,

  You can follow this link & check if the problem persists:

  Error message when you install or start an MS-DOS-based program or 16 - bit Windows based

  Hope the helps of information.

• None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine, but of course, this should work if you think you need.
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues

• When you try to load a game on the Internet I get this error - entry point decode pointer could not be located in the Library dynamic link kernel32.dl

  Original title: need help please

  Please help me I've tried for hours just can't find it try to load the game from the internet charge just before its opening, he said
  error entry point decode pointer could not be located in the Library dynamic link kernel32.dll also tried to download directx said same thing for me
  Please help me thanks
  p

  Hello

  I suggest you try to run the System File Checker
  http://support.Microsoft.com/kb/310747

  It will be useful.