A question about RSL using our Intranet application

Similar Questions

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Question about the use of secondary indexes in application

  Hi, I'm a newbie to Berkeley DB. We use Berkeley DB for our application that has tables in the following structure.
  
  Key to value1 value2
  ------- --------- ----------
  1) E_ID-> E_Attr, A_ID - where A_ID is String for example. A_ID = A1; A2; A3
  -where E_ID is unique but for example A1 or A2 may be part of multiple F_VITA say E1, E3, E5 etc.
  
  
  So my question is that it is possible to create secondary indexes on individual items of Value2 (e.g., A1, A2 or A3)?
  
  
  Another question, lets say we have two tables
  
  Key to value1 value2
  ------- --------- ----------
  2) X_ID-> X_Attr, E_ID
  
  E_ID-> E_Attr, A_ID - where A_ID is String for example. A_ID = A1; A2; A3
  
  In this case, can create us E_ID as a secondary Index but with primary Table-> E_Attr, A_ID E_ID?
  
  While X_ID given, we can get the chronogram, E_ID-> E_Attr, table allocation A_ID?
  
  Don't know if its possible.
  
  Thanks for reading.

  (1) when talking about data & Index, I was referring to READ ONLY BDB with no. UPDATES where you download entire files allows for example on a weekly basis. In this case, I believe that the data will be stored directly in the tree. It will not be stored in the transaction as such logs. This hypothesis is correct?

  # Storage I is nothing other than a transaction log. Read the white paper, that I mentioned.

  (2) and about the Garbage Collection operation, I meant BDB 'Cache éviction' algorithms. Sorry I have not communicated before.

  I use an LRU algorithm. What do you need exactly to know, that you can not get the doc?

  -mark

• Accelerated release of Firefox calendar is at the origin of the compatibility issues with our intranet applications - where can I find the terms of this annex, including the end of support dates?

  We are a University use an updated internal development of e-Learning applications which makes use of a framework rich client (ZK - www.zkoss.org). For reasons of compatibility with this application, as well as other general factors, we have standardized on FF 3.6 browser for all our desktop computers. Normally, we will review our browser selection once a year and make the changes/updates to compatibility level for 3 rd-party libraries we use and our own code, in order to address new developments in the browser market.

  However the FF of the new policy of difficult liberation our lives check. FF 6 came out just months after 5 FF. We perform an upgrade, we have to do a systematic series of tests, settings, changes etc. regression tests. The cost is not possible for us to do this every 3 months! So please can anyone point us to a clear release plan for FF that shows, for each version:

  a. Release date
  b. End-of-support date
  c. Release notes
  d. Compatibility in terms of HTML and Javascript/ECMAScript versions.
  

  https://wiki.Mozilla.org/RapidRelease/calendar
  
  https://wiki.Mozilla.org/releases

  New versions are will be released every 6 weeks, so until Mozilla announced they will do than support for a LTS version for business 'customers', you guys left to swing in the breeze as well as to be able to plan for the future with Firefox. I think that as long as the said decision is taken, support for Firefox 3.6 versions will continue. A 3.6.22 release is under development right now, probably for immediate release next week.

  As far as the end of support dates, as each new version is the version support ends for the previous version, with the exception of 3.6.x. currently Firefox 3.6.x and 6.0.x are the only versions that receive security updates. Firefox 4.0 and 5.0 is not 'supported' any longer.

• I have questions about the use of Microsoft Windows for computer repair purposes...

  I'm about to start a computer like Geeksquad repair business. If I need to re - install Windows on computers is a specific copy, I need to get Microsoft for use of technician? I want to make sure I'm following all the recommendations of Microsoft.

  Hello

  I suggest you to post your questions in the TechNet Forums for a better answer.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• Question about the use of recovery disks Vista Bus on T500 with XP Pro downgraded

  I searched to see if this has been addressed already and I don't see anything about it. I also looked through the Lenovo support site and could not find any documentation with specific information, that I'm looking. So, if all goes well, the people here will have an idea.

  I have a T500 which was ordered with retired on WinXP Pro. It also came with a set of Vista Business (four discs) recovery disks. I plan to get my machine with Vista business records and down XP Pro, but I had a few questions.

  1. as it currently stands, I guess that the R & R partition that is on the HARD drive at this time restoring a WinXP Pro system if I start and get back with her. Is this correct?

  2. If I boot from the recovery disc Vista Business and use it for the recovery of the system, it creates a new partition 'Factory' R & R which would incorporate a Vista Business install?

  I may be wrong on my assumptions and even after the start of the R & R partition, it is really the recovery disks that I choose to use that would dictate if I found myself with a XP or Vista Bus. System.

  For what it's worth, I created a set of recovery disc R & R for the installation of WinXP Pro in case I need to revert to this version.

  I hope that my question is logical and that someone out there has an answer for me.

  Thanks in advance!

  jskang, welcome to the forum,

  Yes on both counts.

  Removal of all the hard drive recovery disks, create the service partition and then the system installs from the recovery with the flavor of windows partition, so that the discs are.

  It was a good idea to create the XP discs.

• Question about MSD + upgrade and migration applications

  Hi all

  I am running:

  TMS 13.2

  TMSPE 1.0

  The two co reside on a Windows 2003 server, pointint in an external box of SQL.

  We also organize TCX 2.3 on our Exchange.

  Now that our server guys have * finally * installed the service pack required on the Exchange, we are ready to migrate to TMSXE but also to upgrade the TMS and TMSPE.

  So we want ot go to:

  TMS 14.2.1

  TMSPE 1.1

  TMSXE 3.1

  In addition to migrate a Windows server 2008R2 TMS + TMSPE.

  I know the different individual guides to upgrade as well as the dependencies between TMS and TMSPE/TMSXE versions.  I'm hoping to do the upgrade and migration all in one and am hoping to get some tips on the best order to do everything.

  My first question - decomission the 13.2/TMSPE server 1.1 TMS, that I can install TMS 14.2.1 and TMSPE 1.1 on the Windows Server 2008, they point to the relevant databases and allow upgrading from there? Or do I need install the new versions TMS/TMSPE on the old server, first of all, upgrade the databases and then migrate?

  Second question - before all this, I run the TMSXE migration tool to extract the data 2.3 TCX, uninstall TCX of Exchange, TMS upgrades and then install TMSXE 3.0/3.1 at the end?

  As all this is running on the virtual machine I'll instant just in case.  Advice on the issues listed above, or general advice about these upgrades would be appreciated

  Hi Nick, IMHO, I suggest you first migrate your 2.3 TCX to TMSXE 3.0.2 by this TMSXE 3.0 installation guide, and then pass the TMS and PE later.

  Yes, VM snapshot backup option before any upgrade is fine.

  BR, Mahesh Adithiyha

• Question about the use of wildcards to the left side LIKE in SQL

  First of all, let me apologize because I posted this question earlier here and the question has been moved to the SQL forum.  Unfortunately, I do not have the possibility to answer or post a question in this forum, so I find myself in need to repost it here:

  If I use the select statement of the suite I get a double line:

  SELECT * FROM DUAL WHERE '%' LIKE '% ';

  But if I use the suite I get no line:

  SELECT * FROM DUAL WHERE '%' LIKE 'A % ';

  I guess that this % on the left acts as the '%' character and no comparison of character models.

  Is it possible to make it act as the wild-card operator, when it is placed on the left side of this TYPE?

  Then someone asked me what was my goal and if I could use REGEX.  Here's what I'm trying to do in general:

  I need to create a query similar to the following:

  WITH Constraint_Search_Input AS

  (

  Some_Id SELECT 'ABC', '%' Some_Other_Id OF the DOUBLE

  )

  SELECT *.

  OF Constraint_Search_Input

  WHERE Some_Id = 'ABC' AND Some_Other_Id LIKE 'a % '.

  ;

  Where the ID in the WITH are an entry from our processes and clause ID WHERE are stored as a set of constraints stored in a record in the database.

  The query is constructed dynamically, so a possible scenario represented in above the simplistic example, is that I received a single ABC for Some_Id entry and number of entry whether for Some_Other_Id but it the constraint (= 'ABC' AND Some_Other_Id LIKE 'A %' Some_Id) stored in the DB.  I then generate the query then because Some_Other_Id is part of the constraint that I need to add it to the entry that I build in the WITH of the query clause.

  I know that I can find ways more developed and complex execution of this match up of entry constraints, but I'm just trying to take advantage of the database to make it in the simplest.

  Thank you

  Thomas

  https://docs.Oracle.com/database/121/SQLRF/conditions007.htm#SQLRF52142 the model is on the right and the value you want is on the left, you cannot use wildcards to the left.

  What is the requirement of real business here? You have presented how you want to solve it, but find it does not work, there may be a more appropriate method.

• Question about the use of an Ad Hoc network on J4680 (wireless)

  I'm helping someone to set up it wireless printer J4680 there new HP laptop. Basically, I need to know if I created it with a 'ad hoc network' if she will be able to connect to the internet and use the printer at the same time?

  It has a network card from Sprint to connect to the internet, she's so not a modem or a router. Ive been reading about ad hoc networks which will allow him to connect to the printer wireless to your laptop without using a router... but I was also told that if it connect 2 devices to ad hoc aid which she had to disconnect from the internet, anytime she wants to print something. Can someone confirm this please?

  If this is true, and she can't use both at the same time... is there anyway that it can connect a router to his laptop computer when you are using a network adapter for the internet service?

  Sorry if this is a noob question or miss important info, im fairly new to all this. Any help would be greatly appreciated.

  Thank you.

  Imprezd02 wrote:

  It has a network card from Sprint to connect to the internet, she's so not a modem or a router. Ive been reading about ad hoc networks which will allow him to connect to the printer wireless to your laptop without using a router... but I was also told that if it connect 2 devices to ad hoc aid which she had to disconnect from the internet, anytime she wants to print something. Can someone confirm this please?

  It is correct. You cannot use the printer and internet connection at the same time. I think that there is a router where you could plug the internet card to get wireless connectivity and connect other devices to it wireless. Although I'm not sure about this. Check with the manufacturers of modern like Linksys, D-Link or Netgear router if they have such a router.

• Question about the use of sharing with several pools of resources

  The design of our environment vSphere has several pools of resources at the root, each series 'Normal' value stocks, and if the resources tab shows that each resource pool '% of the shares' value of 3%.

  However, some resource pools have 50 + VM and others have only 1 or 2.

  Is someone can confirm that this is wrong and that should have a pool of resources with more than VM have a proportionately higher value of action?  This assumes of course that all the resource pools are of same priority (be they makes me wonder why we use pools of resources at all... but that's another issue)

  The reason why I ask is that the 'worst deal allocation' is for memory and CPU is much higher on the pools of resources with multiple virtual machines, so it's obviously something in the algorithm of resource allocation that is aware of the total number of virtual machines in the pools. Resource pools are defined as extensible and I'm assuming that this "worst case allocation" would go down considerably as the cluster approached his ability, but I wanted to check before starting to change things...

  Welcome to the Forums - you are right to worry about this situation - check on http://www.yellow-bricks.com/2010/02/22/the-resource-pool-priority-pie-paradox/ for description - but don't worry Duncan also has a solution - http://www.yellow-bricks.com/2010/02/24/custom-shares-on-a-resource-pools-scripted/

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Question about "Menory use (average)"... in graphic

  Hello.

  Please, I have a basic question... Please, see the picture I have attached, consider with the virtual Center...

  Grafica, jpg - & gt; Real time

  grafica_2 - & gt; last month (it's the only Foundation Center Virtual value show me.)

  It is a picture of a debian 4.0 etch VM with 1 vcpu and 1024M... and a reserve of 1024M and limit: unlimited

  This machine is NOT running vmware tools

  1 - why this table show me that 100% of the 2 G memory and not 1 G? that's because the limit is 'unlimited '?...

  and, although the operating system have assigned only 1 G... He can get more memory, if the limit is unlimited?

  2. - why the virtual machine has used more than 1024 M which is I assignet him remember?

  3. - in the entrance... "Use of memory (on average)"... What does that mean? ... Please see the high value of 75%... of what? the host esx amount total memory?

  the total memory that is never used by the virtual machine?

  because if you please... . See the grafica_2... How can I know the value of the average of memory reference?

  4 - in grafica_2... What is the reference?

  Thanks 1million

  It is a picture of a debian 4.0 etch VM with 1 vcpu and 1024M... and a reserve of 1024M and limit: unlimited

  This machine is NOT running vmware tools

  OK, first of all there is a misconception and confusion around the whole thing 'unlimited '.  The unlimited by VM's is a way to dynamically throttle the RAM. If you need to leave it to "unlimited".  If you allocate 1 G to the virtual machine and it is set to 'unlimited' means that the virtual computer has access to his assignment, not the full set of what's on the ESX host.

  Tools mean nothing either, the tools allows the ESX host to 'see' what is the virtual machine making (ip address, host name, etc.) and improve the drivers for the video, network and disk optimize for the virtual machine in ESX.  And as a matter of principle, you should ALWAYS use the tools.

  1 - why this table show me that 100% of the 2 G memory and not 1 G? that's because the limit is 'unlimited '?...

  and, although the operating system have assigned only 1 G... He can get more memory, if the limit is unlimited?

  The virtual machine can NEVER go beyond its initial allocation.  You set the parameters and it is limited to 1 G. You can uncheck 'unlimited' and change the memory within the virtual machine and change the memory between minimum required for the virtual machine and is the current distribution of max in this case 1 G.  So, in essence, that you can change the memory while the VM is running using this, otherwise, leave on 'unlimited '.

  2. - why the virtual machine has used more than 1024 M which is I assignet him remember?

  Where are you more than 1 G?  I don't see that.  In fact, according to the table, you're on allocating memory, cut in two because it is not used.  Also do not forget that these paintings is from the point of view NOT HOST the virtual machine.  So this means that the HOST must allocate memory X to give the virtual machine, he needs to RAM, which means most of the time you don't give RAM at least that what needs the virtual machine.  So, generally (inside the prompt), you will see virtual machines with 1 G of RAM and the host is only showing 300Meg allocated, for example, but only spikes active for this virtual machine rarely... and even then it's barely more than 50%.

  Average memory is the distribution of ESX for this virtual machine (it is hard to really judge it).  So for the 1 G you have allocated, it is only actively using 25%.  If you turn off, change to 512 and the power on, you will see this graph set now at about 75-80%.

• Questions about the update of an application in the app store

  I am a member of creative cloud working with simple editing DPS. My app was approved by Apple and is in the store. But, of course, there is a typing error. What should I know about the submission of an updated version. Should have a new 1.1 version number to say? Can I use the same mobile both provision and development 12 certificates? Is the review ordering process more when it's an update?

  Thank you

  Chuck

  Hi Chuck,

  Subscribe to Adobe Creative cloud can revise their applications (and submit their applications reconstructed at Apple) as long as they subscribe to creative cloud. When you change your application, use the same ID App and distribution provisioning profile to create the new custom Viewer. In DPS App Builder, select the existing application that you have created and click on modify. Specify the latest version of the app, if you want and follow the prompts to create a new app download and test the development agenda. In iTunes Connect, click on manage your Applications, click the application that you want to update, and then click Add Version. Follow the prompts and then use Application Loader to download the .zip file.

  Concerning

  PEREADEL

• questions about the uses of flash cs6 and the code that it exports VS. switch to other tools

  I looked at the overviews on the new version of flash and I did experiment a bit with muse and edge of adobe. I have also heard the announcement Friday 4.1 android devices will run is no longer the flash player. my questions are:

  1 does flash cs6 fuction basically the same design-wise, but when it comes to export the file, the code a combination of html and javascript rather than in a solid swf file as it was currently publishing my work as?

  2 East edge meant to supplement flash? or he will take some of the uses of the flash so edge can publish for flash and mobile devices will remain in the area of desktop applications?

  3. If I created full-flash sites in older versions of flash, can I import in cs6 and make them exported as functional across all devices?

  I guess that, overall, just trying to get an overview here so that I can decide how to move forward and what to focus on.

  Thank you!

  1. Yes. The Toolbox for CreateJS is an additional downloadable extension for Flash CS6. He's going to post html and js files that will provide the animation rather than the swf file that you would normally publish. The success or failure of the version of javascript from your animation is the result of the work within the Toolbox. You are a bit constrained in the use of the timeline in Flash for your animations. If you are only working in Actionscript, then the output will be very disappointing.

  2 edge outputs javascript, css and html for you give an animation. The user interface allows you to design within the limits of what can make the border. You can preview and adjust and adjust your animation work you. Edge is a tool of html5. It can create some animation html5. It is not a replacement for Flash. It's something that you can use to integrate the animation in html instead of Flash.

  The problems and the benefits of each are unique. It is a good substitute to learn javascript, css and HTML 5. If you don't understand the code that is created from each of these tools, you can easily end up with huge, inflated, files which improved. I'm very biased towards really knowing what is happening. If I need to change something, I want to be able to enter the code and make a change, do not add an extra piece of code to work around what was there. I don't use any of the timeline, and so nothing of what I publish using CreateJS. Well, he's going to publish, but nothing happens because there is nothing on the timeline to translate.

  You can download a trial version of Flash CS6 and try to box at tools for yourself. Edge is still in free preview, you can get a copy to http://labs.adobe.com and try to see how it works.

  Also, if you do not use the Greensock Animation with Flash platform, take a look at this. It has recently been extended to ensure similar Javascript for most libraries. http://www.greensock.com/

• Question about the use of JavaScript in Managed Bean

  Hello
  
  I have two questions... The reason for these questions is: we have a requirement that we have executed successfully using jsp and javascript. Now, we are unable to be implemented using the framework of the ADF. It is why would have a jsp with javascript page to reach the requirement.
  
  The condition is:
  1. to print a page. This page should be displayed with a customer bills. If the customer has 3 invoices (html content), these 3 bills needs displayed on the screen with a page break.
  2. because the page has a lot of data, certainly there will be a right of the page scroll bar to scroll down to see the data.
  3. now, the user clicks on the file--> print available on the browser / provided a "print" button with < af:showPrintablePageBehavior / >. When this happens, it is able to print the data that is displayed on the screen, not all 3 bills.
  
  This kind of requirement we already implemented using legs force Framework(jsp,java script).
  
  Now my question to you is:

  how we can open a new window bowser using java from a managed bean script.

  Let me know if you need more information about it.
  
  Thank you and best regards,
  Kiran kristelle

  the PDF version of the documentation:
  http://download.Oracle.com/docs/CD/E14571_01/Web.1111/b31973.PDF

  Kind regards
  Branislav

• Question about the use of constant variables in forms

  As I am still very new to forms, please forgive my ignorance, if the answer to my question is very simple. I'm trying to understand how to use constant variables in my application Forms. For example, if I want the return code of constants for the configuration application (not, mind these are examples):
  
  RC_SUCCESS CONSTANT PLS_INTEGER: = 1;
  RC_FAILURE CONSTANT PLS_INTEGER: = 0;
  RC_YEAR_DATA_NOT_FOUND: = 50;
  
  Then in a module I created, if I wanted to check the return code against one of the constants I would do:
  
  DECLARE
  RC PLS_INTEGER;
  BEGIN
  GET_YEAR_DATA ('2000 ', rc);
  IF rc = RC_YEAR_DATA_NOT_FOUND THEN
  -Make an error handling
  END IF;
  END;
  
  I know that you can declare constants within the individual procedures or packages, but I can't find information on how to do it in the world for the application. I read on the use of global variables in forms, but only the CHAR data type and the fact that the value can be modified doesn't really fit for this purpose have I missed something? Is there a config file or something for the Web server that can be used to configure these?
  
  Any help would be appreciated.
  
  Thank you

  To declare constants create a Package specification in a pll and deifne all your vitals, something like:

  PACKAGE PK_CONSTANTS IS
    RC_SUCCESS CONSTANT PLS_INTEGER := 1;
    RC_FAILURE CONSTANT PLS_INTEGER := 0;
    RC_YEAR_DATA_NOT_FOUND := 50;
  END;
  

  Then attach this pll for all your forms-modules and use it as

  IF rc = PK_CONSTANTS.RC_YEAR_DATA_NOT_FOUND THEN
    ..
  END IF;
  

  A word on exceptions or errors: to me more clear (and in the case of exceptions even better) to throw an exception only to hide behind return-codes.