Reading the value of the attribute 'WaitForTarget' of the waiting stage

Similar Questions

• How to read the value attribute and put inside?

  What happens if we want to read the attribute value? And want to put the data of runtime on the value of the attribute as
  
  < psoID ID = "user id" / >
  
  How to get the value of the ID as the user id. And how to put the run value on it?
  
  I can think about is that
  
  /psoID/@ID/value GOLD psoID/@ID/*[local-name () = 'value']
  
  And how to put the value inside ID ="? »
  
  Thank you

  Because we are dealing with a structure of type anyType you must use the functions of node (local name) in combination with predicates ([]) to read or write values (node) of the element:

  To read the value for example use the copy rule:

  
  
  
  

  This wil read:

  /processResponse/result/psoID/@ID

  on the message:

  
  
  
  
  

  You will see the value 'B '.

  To write, you use:

  
  
  
  

  Kind regards

  Melvin

• How to read the custom file Jad jad attributes?

  Hi all

  Please help me.

  I need to read the custom JAD JAD attributes frm file.

  I use this code

  "

  AllGroups [CodeModuleGroup] is CodeModuleGroupManager.loadAll ();.
  CodeModuleGroup myGroup = null;
  String moduleName = ApplicationDescriptor
  .currentApplicationDescriptor () .getModuleName ();

  for (int i = 0; i)< allgroups.length;="" i++)="">
  If (allGroups [i] .containsModule (moduleName)) {}
  myGroup = allGroups [i];
  break;
  }
  }

  Get the property
  Var description As String = myGroup.getProperty("MIDlet-Description");
  Custom string = myGroup.getProperty("My-Custom-JAD-Property");

  "

  Copy the following code gives the 'description' string value, but NOTHING is coming when I read the string "Custom".

  Let me know, where I'm wrong.

  Kind regards

  Ashutosh

  Good to know that he has worked through the OTA.

  4.2 versions below there is no workaround for it.

• Read the selected values of af: selectManyListbox

  Hello

  had af:selectManyListbox in the page with the dept_id as the base attribute and dept_name as the display attribute.

  Since his multi select I am able to read the values selected by the table according to the following code

  BindingContext bc1 = BindingContext.getCurrent ();

  DCBindingContainer binding1 = (DCBindingContainer) bc1.getCurrentBindingsEntry ();

  JUCtrlListBinding listBindings1 = (JUCtrlListBinding) binding1.get ("DEPTVIEW1");     

  Object [] str = listBindings1.getSelectedValues ();

  System.out.println ("after object str [] = listBindings1.getSelectedValues ();");

  for (int i = 0; i < str.length; i ++) {}

  System.out.println (STR [i]);

  }

  who's back the dept_id s as it is the base attribute

  say

  2

  3

  6

  on the basis of selection

  I need to recover the DEPT_NAME too?

  How to fetch the DEPT_NAME which is the display attribute?

  Bindings has the DEPTVIEW1 in the variables. so I can't separate the DEPT_NAME also gives access to links.

  Thank you

  Chaya

  Hello

  See page 18 - the solution should work for you

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/january2012-OTN-harvest-1504418.PDF

  Frank

• How to read the value of an independent textInput element inside the method?

  Hello
  
  I had a group of detail based on a readonly viewobject. I added an independent element textInput, you say, EndDate to this group that the user can enter a value inside. Now, when I run the app I select a row in the table and press a button that triggers a method inside a bean. My question is how I read the value in independent textInput (EndDate) within the method element?
  
  getTable () .getRowData () does not print the unbound attribute. It seems that it only contains attributes underlying viewobject
  
  I use JDev 11.1.1.4
  
  Kind regards
  Will do

  Will do,

  You can better create a transitional attribute for that in your view object, so you can use a regular expression #{row.bindings...} to get the value.

  Steven Davelaar,
  JHeadstart team.

• read the value of the item page after filling value pop-up window

  I can't read or insert and also I cannot perform dynamic action of a page element data after the filling of the data page of the window popup (pass back to the point of the page). But I can read and insert, perform a dynamic action data while filling in the data using ajax and PLSQL code...
  
  
  How to read the value after the filling of database page popup window?
  
  
  SKUD

  Set value using Javascript is that in your browser page but is not yet available in the session. This is why the report does not return the expected results.

  Before you refresh the report, you need to set the session state from this point.

  You can configure after assigning a new value or before the report is updated to the element
  For interactive reports, is available built in
  You can go to report attributes > attributes advanced-> Page elements to submit and specify P2_X1 for the field (and any other page element that depends on the report)

  For standard reports, you can create a dynamic Action that is triggered 'before updating"report region, select PLSQL as action types, give a code BÉGIN END NULL; model and specify the name of the item in the item page to submit the field so that it affects the value of items in the session.

• How to read the value of request Http of the filter of the UCM?

  We have an application web connect to the Complutense University of MADRID. I would add some values to the request sent to the Complutense University of MADRID by this application. This value will be read by a filter of the Complutense University of MADRID, I created.
  
  What is the value of HTTP servlet can be read the filter of the UCM? is it possible to do something like:
  request.setAttribute ("myAttribute", "theValue")
  
  and retrieve myAttribute UCM filter value?
  
  Thank you

  AACC,

  When you rexternal application makes the call to the Complutense University of MADRID, all URL parameters or attributes of the request transformed into data variables Local to the Complutense University of MADRID.

  When you create your filter (if all goes well we are talking about the same thing here that filters means something special to the University Complutense of MADRID) you write Java Code. In this Java Code, you can access 'the query' attributes/values with code like this:

  String myval = m_binder.getLocal ("MyKey");

  Your mileage may vary, but this is the Basic code for out, review and/or use the query parameters.

  -Jason
  http://www.corecontentonly.com
  http://www.redstonecontentsolutions.com

• read the independent values in a channel

  Hello

  I want to read the value of a chanel.

  I guess that every chanel's store as an array with an index and a value.

  I would like to read a value of a chanel with its index number, then do some calculations, and then write to it.

  For example:

  Chanel 1:
  index value
  1           1
  2           1
  3           1
  4           2
  5           1
  6           1

  start index = 0
  value > 1?
  If no control of the following
  If so do something

  Do you have a sample script to read a unique value in a chanel?

  Kind regards

  Frédéric MANUAL

  OK, so it should work

  Dim oChn, K, value
  "Go to the channel you are interested in.
  Set oChn = data. GetChannel ("Time")

  ' loop through all the values
  For K = 1 To oChn.Size
  Value = oChn (K)
  If (value > 1) then
  "do something
  MsgBox ("value WG 1")
  End If
  Next

• How to read the value of list boxes by iteration in a loop For?

  I have a lot of list boxes on the front of my VI. I want to know how to read the value of this combo with a loop boxes For. The point is that I don't know how to get the reference of each combo box in a loop.

  Any information would be welcome. Thank you!

  su27 wrote:

  I have a lot of combo boxes on the front of my VI [...]

  

  Be sure to close the references that you have finished with them.

• Cannot read every value of the loop iteration for

  Hiiii...

  I developed a front-end which reads the values of serial port and display on the front panel.

  16 channels, which is a string data value. I've separated this string to read the data of each channel, but at the end of the loop for, I can read data only one channel for an iteration, and also I have to store each value iteration in a text file.

  I'm new to labview. Help, please. I have LabVIEW 8.0.

  Attached is my application code.

  This seems quite inefficient. Why don't you use a business structure? Why don't post it your code.

  In regards to the original code, you try to run by using the run continuously? I ask because I do not see a global loop, so it was not clear whether this was intended to present itself as a simple Subvi or "on-demand". If it's supposed to run continuously until you stop, DO NOT USE CONTINUOUSLY RUN it BUTTON. Use a while loop in your VI. Do not forget to place the initialization and close outside of the loop - you don't need to initialize and close the serial port whenever you loop around.

• DAQmx read - the values on the scale or not? Binary conversion.

  Hey everybody,

  I had a question regarding making the scale and the release of Renault. I use LabVIEW 2009 SP1, with a pilot DAQmx 9.0.2 and a X-Series card. I'm reading the data my DAQ and store it in a binary file.

  How is the acquisition of data read samples, in General? that is if I select NSamp NChan I16 2D Analog on my DAQmx Read, what kind of values can I expect if I was at the exit of the probe data? (Suppose I have readings in mV values and my overall fork's 04:55 V.) When he wrote in the binary file, what happens, what can I expect to see in terms of values - or maybe just descriptively?

  Overall, a little insight would be very helpful. I tried to troubleshoot asymmetric readings I received, so this will help me immensely.

  Thank you.

  Hi Matt87,

  Reading data as I16 will return the result adjusted, not calibrated for 16-bit ADC.

  If you want to write your own binaries, you'll want to include scaling of device - for series X, coefficients a 3rd order polynomial.

  Here are two examples that show how write to a binary file and read the data back.  In this example, scaling coefficients are stored in the file header:

  Continuous gain and voltage drop (binary) chart

  Graph of the acquired binary data

  That said, I would recommend that you look in the record feature integrated TDMS introduced in DAQmx 9.0.  The result is a file appropriate binary .tdms which is a standard format that can be opened in LabVIEW or in several other programs with the plugin.  See the following examples for how to use the function:

  Streaming data and log to the PDM file

  Continuously to log in a PDM file data

  The second example does not force you to read the data in the memory of LabVIEW and use the minimum CPU.  The first example allows you to see the data that is acquired.

  Best regards

• read the value of the variable knowing only one name

  Is there a way to read a variable value of knowing only the label name? I have 11 Labview and am to read a text file with a list of variable labels and try to read the value without having to create a structure of matter of hundreds of variables.

  Are we willing?

  

• Read the output values after each step runs in the User Interface of LabVIEW

  Hi all

  Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1

  Problem: is there a way to run the following steps programmatically and get values out of each of them?

  I have already extended a bit a complete interface IO for TestStand load any sequence, choose among the measures and execute step by step (something as an alternative to the steps run selected). What I'm trying to do is to add some actions between each step and do in the UI (I can't change the sequence!), so I start the NewExecution with some previously configured InteractiveArgsParam and option breakAtFirstStep set to true. Eventually I do just something like step over when debugging the sequence and it works well, but I didn't do well a way yet to read the output values of the place...

  So, if I wait before the end of the run I can read my results by treating the ResultObject, but it works only after the completion of the test sequence. Because I wanted to stop after each step, read the values, do some actions and continue to the next step, I've tried to register a running Trace event reminder View Manager. I see that after each step is executed, this event is fired, but when I try to read that a ResultObject returned in the event data it is not filled with values (ResultList seems to be empty?). Is this a correct behavior or maybe I'm reading the wrong way? (It's the same VI regarding the reading of the ResultObjects after the sequence ends and there it works very well for tables, containers and other types of data).

  As I mentioned I can't change Test sequences, I can not add a UImessages.

  What are my options? If the trace event returns output all the values from each steps or is it just used to check the status? Or maybe there's a completely different approach to this issue?

  Thanks in advance for your suggestions,

  Best regards.

  When you manipulate the UIMessage trace (you need this before the return of the event or you will present the race conditions), download myuimessage. Thread. Then call Thread.GetSequenceContext (0, & Iplease).

  And then on the context of the sequence, either go to PreviousStep.Result if it exists, or watch Locals.ResultList.

  Trace events occur between the steps executed step the more recently is the previous step, but it is also a trace event to the beginning before any measure have run at this time, there will be a previous step.

  Hope this helps,

  -Doug

• Read the last value of a large file of PDM

  Hello everyone!

  I hope someone can help out me with this one.

  I try to put in place a program that can read the last value of one of the large channels of different TDMS files but I just can´t find a way to do it.

  I would appreciate help for my little problem.

  Thank you very much in advance for your support.

  Kasim.

  Hello

  You can use the following playback TDMS Set Position feature included in the PDM API.  This function receives a parameter called "(0:start)", which can be set to 1 to go to end of the file.  In this way, you can read the last value written to the PDM file.

  I hope this helps!

  Anuar Rojas

• urgent request: how to read the value of a register using VISA read?

  Hello world

  This is a very urgent investigation. can someone help me please? Thank you very much!!

  I wrote a few commands in several registers using VISA write. now, I want to read the value of a different register.

  But the bytes returned are just the commands, I wrote before and a few other commands that I don't know what they are for.

  This is the format of the command, and I enclose the sheet... I want to read the value of register (0 * 41)

  .

  Ravens, if you have something more than me, do not so much it at all =)

  The command you have posted has several components:

  The gray area of the transport layer uses for a checksum

  several bits set to 0.

  a single bit to define if it's a read/write operation

  a byte to identify the register of interests.

  two bytes for the data.

  With what you have provided, there are only three things we need to worry:

  (1) set the R/W bit to 0 to mean we're reading rather than write.

  (2) set the second byte 0 x 41 to focus on the register of interests.

  (3) with a reading, I can't imagine the last issue of two bytes.  They probably ignored.  The documentation you provided does nothing to explain this.  The most logical thing I can think is that these two bits contain the data, you go to the registry if you set the R/W bit to 1.

  There are two parts to this communication.  The first part is an entry VISA to send this control unit.  It is likely that you will need to complete the message.  You will need to know how to do this.

  The device must respond with the message that you mentioned in the original post.  Crows is right.  He's coming back as a string.  You can use the subset of string to separate the components defined by the standard.  You can use these components to determine if the data is legitimate and then do what you want with the data.