A question about sending PlayBook

Similar Questions

• Probably a stupid question about sending electronic mail but not be received (or sent)

  Hello

  I try to send an email from my BB. I use this code below...

  Message msg = new Message();

  try {}
  String emailAddress = "[email protected]";
  msg.addRecipient (Message.RecipientType.TO, new address (emailAddress, emailAddress));
                      
  String fromAddress = properties.fetch () .getFromEmailAddress ();
  If (fromAddress.length () > 0) {}
  msg.setFrom (new address (fromAddress, fromAddress));
  }
                      
  If (properties.fetch () .isCopyEmailToSelf ()) {}
  If (fromAddress.length () == 0) {}
                              
  Returns false;
  } else {}
  msg.addRecipient (Message.RecipientType.BCC, new address (fromAddress, fromAddress));
  }
  }
                      
  msg.setSubject ("Testing");
                      
  content
  String content = "some test string";
                      
  msg.setContent (content);
                      
  Transport.Send (MSG);
  } catch (AddressException e) {}
                      
  Returns false;
  } catch (MessagingException e) {}
  Returns false;
  }

  I followed the tutorials in the knowledge base. I want users of my application to be able to configure the address and I don't want to save a copy of the email to any folder/email address on the phone.

  I'm currently debugging the code and it does throw an exception, and it is correctly signed. However, I get e-mails in the e-mail account 'to' or 'to' if account I have configured the application to bcc a copy for the account.

  Do I need to configure the appliance to send emails? I don't want to use any account e-mail on the device.

  Thank you

  SArah

  "can be sent to programtically without going through an email account set up on the phone?

  There is no API that I'm aware of that will support this.

  "When you say"works"he throws any exceptions, but it sends no emails no more"

  Doing so on the Simulator, not the end of the email to the top in the list of Messages.  The Simulator will attempt to send it and then, since you don't have the ESS work, give up.

  "If the user must create an account on the phone, do I need to modify the code to use it.

  As mentioned, I don't think that this code works without an account on the phone, so I think that this question is moot.

  "If you use the e-mail account on the device how is, you can define an address «of» the message?

  I don't think you can define an address.

  "you have more than one e-mail account on a device?

  Yes.

  You might find these links useful:

  http://supportforums.BlackBerry.com/T5/Java-development/sending-email-messages/Ta-p/442790

  http://supportforums.BlackBerry.com/T5/Java-development/retrieve-the-default-email-address-for-the-d...

  http://supportforums.BlackBerry.com/T5/Java-development/send-a-message-from-a-non-default-email-addr...

  Do a search too, I'm sure you'll find other useful things.

• question about sending mail and the use of UrlEncodedPostData

  Hello

  I need to send over https three things:

  (1) framework, which is a byte [] object, and has some information about the device and the things that need to be sent to the server

  object String 2) imei - imei of the device.

  (3) data - some data, which are a String object

  now I need to use URlEncodedPostData, but...

  UrlEncodedPostData _post = new UrlEncodedPostData(null, false);
  
  _post.append("frame", ???)-> my frame is a byte[] object
  

  so, what should I do? should I change channel frame? but, later when I send the _post to the server that I use:

  _httpConnection.openDataOutputStream(_post.getBytes());
  

  YH, the problem is-how to put a byte [] object to the urlEncodedPostData and then send it?

  The point of encoding is to ensure that special characters can be detected correctly.  There is no URL address, as the settings.

  You will notice that the class that you are trying to use is called URLEncodedPostData.  I don't know if the same URL encoding is used in BOTH and given POST, but I think this class should be used in the data of PUBLICATION, rather than to GET data (look at the name).  You will find that the process of encoding data GET is not so difficult and I don't know if you look you will find J2ME coding code on the Web, that will help you create correctly to GET URL format.

  However, I still think you should consider the difference between GET and POST, and what data is passed by each type of application.  I think that if you had done that earlier, you wouldn't be in this position, you understand better my answers and you will understand how to create the queries POST you have to best use later.  GET and POST are NOT Blackberry or specific RIM, they are the Web specifications and used on all platforms.  There is a lot of documentation out there.

• Question about sending e-mail to multiple recipients

  Hi all
  
  I'm creating a workflow that will send a notification by email each time a new campaign is created. I learned that R16 is able to send emails to multiple recipients, the only concern I have is that I can't find everything will have on how to do it. It is indicated in the Guide of Preview R16 administrator you can select "specific"E-mail address ", enter several e-mail addresses directly, tried to enter several e-mail addresses separated by comma - [email protected], [email protected], [email protected] for example, but it does not work and invites me to enter a valid email address. Could someone guide me on how to enter several e-mail addresses when you select 'Specific E-mail address' or how to do it in the expression builder to set the expression that defines the list of emails. I know that by using addresses group e-mail can be used as an alternative to this requirement, but I hope that their way to proceed with workflows.
  
  Thank you
  Wayne

  Wayne,

  Outlook uses one; to divide email addresses have you tried?

  see you soon
  Alex

• Question about sending an invitation to download creative cloud to a user.

  I am the administrator for my company. I ordered 2 licenses for the full package of creative cloud and sent an invitation to a user through the console to download and install a license. She said that when she clicked on the link, he asked a password I do not see a password I can give him anywhere in the Admin console, please help

  Thank you

  Ken

  Please contact Creative Cloud for the support teams directly,

  Contact customer service - creative cloud to teams

• Question about local variable in LabVIEW

  I am a new bie to LabVIEW.

  I have a question about local variable in LabView.

  I tried to stop a loop by the local variable, but the value of the loop for counter is different with my hope.

  I think that the loop to stop at 6, but he stopped at 7.

  Could someone help me?

  This looks exactly like a race condition.  You have know control if the control terminal is first in reading or the local variable is written to the first.

  Try to run your code to highlight execution.

  In your code, what usually happens is that order is read and the value is false.  Then the other code will run allowing the value to write to the local variable.  Let's say that in a particular loop iteration, we get the True value.  But control of the final value has already been read as false, then the loop runs again.  The next iteration of the Terminal is read and then he sees the true, will force to stop no matter what happens in the rest of the loop the loop.

  So, why do you use a local variable instead of sending just the wire to the terminal stop?

• This is a question about ATI

  This is a question about ATI (whatever it is?) that is installed on my computer.   I constantly get a message indicating that VPU RECOVER has reset the accelerator graphics etc, etc and I have to click on send, but the message comes back as undeliverable.   What now?

  ATI is the brand of your video card.  The brand is now manufactured by AMD.  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  The message indicates an automatic recovery of an error condition.  From the little I saw in a quick Google search, it can be difficult to find the precise cause of the problem.

  This page gives a few suggestions, but if they seem to be beyond your level of technical expertise, you might be better the computer in a local independent repair shop renamed (not a type BigBoxStoreUSA or rather GeekSquad)--> http://www.radiognome.com/2009/02/28/vpu-recover-issue-and-ways-to-fix-it/

• Questions about the Windows Feedback program Fullfillment

  When will I know if my fullfillment of windows feedback program is over, that I have installed on my PC?

  Hello mpic16,

  If you have questions about the Windows feedback program, you will need to respond here.
  https://WFP.Microsoft.com/welcome.aspx

  You can send an email to: * e-mail address is removed from the privacy *.

  They would be better able to answer your questions and concerns.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Various Questions about wireless access controller

  Help me please with these fundamental questions about the role of the access (AC) wireless controller.

  Assume that the access controller and Access Point are connected via IP:

  -Wireless frames sent to AP to acre; include the original MAC header (on the way to wireless access)?  If Yes, is there a Cisco AC gets to fill the WLAN and LAN it is plugged (which means that it outputs as ethernet frames as if they were issued by Mobile Stations).

  -Is the AC necessarily the default gateway for mobile stations? I guess not. But it is possible the default gateway?

  The Cisco AC can function as a DHCP relay?

  The AP creates a tunnel to the controller. All IP traffic from the AP to the controller will address the AP source and dest IP to the interface of the Manager of the AP on the controller. The wireless client traffic is encapsulated inside this tunnel. When it hits the controller the CAPWAP is removed leaving the customer's original package to be sent to the local network through the controller.

  The controller should not be the default gateway for wireless clients because it is not a router. Think of it as a device that converted into wired wireless traffic.

  Normally, the controller acts as a proxy DHCP. Once the customer has joined a WLAN, the controller sends the DHCP packets to the DHCP server on behalf of clients such as the IP address of assistance normally configured on the router for cable customers. You can also configure the controller to act as a DHCP server for wireless clients.

• Question about backing up the Lenovo factory

  Hi, I have an E530, I have a question about the Lenovo factory back, I'm a little unsure of the difference between the bootable media and just backup data.

  Is the bootable media just the equivalent to a disk of windows 7?

  the option data backup all currently installed on your laptop?

  I tried with the two checked options the other day and I got to the point where he solicited for disc DVD - RW 6 so I cancelled because I didn't know how much in total he would do, would be nice if he told me so I could better prepare.

  Also, if I was ever to use the data disks, would you boot from the startup disk you did first then also boot from CD 1 of the data disks?

  Hi James,

  We create these disks to customers of all time.  In our case we have Win 7 Pro, pre-loaded.  Win 8 discs are already included with the device.

  The process of factory recovery disks will create a set of disks [the E530 in the USA, to 4 DVD - Yes it would be nice to know how much to advance] will allow you to restore your machine out of the box.  The first disc it creates is a boot disk - you start from this when you start the recovery process - that's all it is. No file data/images for the restore process.  Other disks contain image files needed for restoration.  This does not save the user data. It is a different process.

  Since you started & cancelled the process, I'm not sure that it will allow you to re - burning the discs.  Because of the MS license restrictions, you are allowed to burn discs once.  We got all the way on the last drive and had the process fail [we don't know why - maybe bad disc?] and we cannot redo records because he thinks that we have successfully created their.  So, we have to call Lenovo support and ask them to send us a set of disks in Windows 7.

  I hope this helps...

  Al

• Question about DISCHARGE (expr, 1016) function

  Hello
  
  I have a question about the DUMP function, specifically the DUMP (expr, 1016). What character set is the function of report? The only logical answer seems to me the characters of data. The http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions055.htm#SQLRF00635 docs it says: "by default, the return value contains no character set information. To retrieve the name of character of expr, add 1000 to all the values of previous format. "For example, a return_fmt of 1008 returns the result in octal * and provides the character set name of expr.*.
  
  I ask this question because a client complains that there a database with database EE8MSWIN1250 (obtained from DATABASE_PROPERTIES) characters and when I asked him to run a SELECT that could empty the contents of a column, he gave me this result:
  

  select dump(some_col, 1016) from some_table;
  
  Typ=1 Len=8 CharacterSet=AL32UTF8: c5,bd,c5,a0,54,45,53,54

  Now I can't imagine how the data can be stored in the AL32UTF8 character set if the characters of the database are EE8MSWIN1250. This scenario is still possible? I tried in vain to reproduce on my test database.
  
  I don't know if the column is defined with the characters of database or the national database characterset, but even if it was a NVARCHAR2, the dump function could not return AL32UTF8 since he is not a national character set.
  
  If anyone has an explanation, I will be very grateful.
  
  Thanks in advance and best regards,
  Swear

  1. to help with the confusion about the DUMP function: index realizes that the DUMP function can be performed in the remote database. Oracle tries to push as many functions as possible and semantically correct on the remote site. Therefore, it sends the statement of simple table on the remote site after stripping the DB link. In this case, the DUMP function sees the character set of the remote database and creates the resulting string of information. This string of AL32UTF8 to EE8MSWIN1250, as described in the note, but as all the characters in the string of information are pure ASCII, some codes are actually changed.

  Things get more interesting if you start to combine the tables of local and remote databases. For example, the following query is will normally return the character of local database defined for the two columns:

  select dump(xx,1016),dump(yy,1016) from (select x.dummy xx, y.dummy yy from dual x, dual@dblink y);
  

  This is because the first dual@dblink is transported to the local site and the join is performed here with application of DUMP.

  The following query returns the set for two columns of characters in remote database:

  select dump(xx,1016),dump(yy,1016) from (select x.dummy xx, y.dummy yy from dual@dblink x, dual@dblink y);
  

  This is because all the tables are remote and the entire query is sent to the remote database and y.

  The following query returns the remote character set thus:

  select dump(xx,1016),dump(yy,1016) from (select /*+driving_site(y)*/ x.dummy xx, y.dummy yy from dual x, dual@dblink y);
  

  Here, the DRIVING_SITE hint asks the database to perform the join in the database of the table, for example dual@dblink.

  2. to answer your question:

  Your understanding of the way of conversion is generally correct, but conclusions are not quite correct. In the scenario [client EE8ISO8859P2, EE8MSWIN1250 local database, remote database AL32UTF8], Eastern and Central European characters will work correctly, but the other characters to the remote database will not be (for example, French, Greek, Chinese). It is, I think, quite clear and is usually not a major problem, as usually only compatible languages EE8 are interesting for an EE8ISO8859P2 customer. However, in the scenario [customer AL32UTF8, EE8MSWIN1250 local database, remote database AL32UTF8], the problem becomes more visible. Having a taking customer support Unicode, you can recover some data French or Greeks of the remote database but you will fail as all of these characters will be "killed" by the conversion of distance at the local level (link DB conversion).

  EE8ISO8859P2 is also for the same group of languages, such as EE8MSWIN1250, indeed, but it lacks some interesting characters. The most important of them is the symbol of the Euro. Others are "' quotes, long dashes, TM symbol, and a few other less frequently used punctuation. Therefore, always define a database as EE8MSWIN1250, even if you run some clients (Unix) with EE8ISO8859P2. Do not run Windows with EE8ISO8859P2 clients, except for purposes of loading/generation of special file.

  -Sergiusz

• MAA - RAEVEN & DataGuard conceptual question about Photo (10.2 doc)

  Hello experts,
  
  I have question about the figure:
  'D.1.2 putting into place of a primary of multiple instances with a multi-Instance standby'
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14239/IMG/rac_arch.gif
  
  page http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rac_support.htm
  
  Detailed explanation is provideded here:
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14239/img_text/rac_arch.htm
  
  It is said:
  «This illustration shows a primary database archiving online redo logs to a database, multi-instance multi-instance ensures in a Real Application Clusters environment.» In this configuration, there are two instances of primary database: has the instance primary and primary Instance B. There are also two instances of sleep: standby receiving Instance C and standby recovery Instance D. The definition and purpose to receive the bodies and recovery is described in the text that follows this illustration. Each primary instance uses a LGWR to write again online newspapers and recovery logs archived local processes on the primary instance. In addition, the process LGWR on the primary Instance a sends its changes over an Oracle Net network to the RFS in First Instance B process and to the RFS process on Standby receiving Instance C. primary Instance B sends its changes over an Oracle Net network to the RFS on Standby Recovery Instance D process. The RFS process on each standby instance written in local newspapers do sleep. This figure also shows how the process ARCn on Standby receiving Instance C sends its changes over an Oracle Net network to the process on Standby Recovery Instance D RFS. The process on Standby Recovery Instance D ARCn also archives its changes in newspapers local archived redo. »
  
  Question I would like to ask because I'd like to better understand the Internals:
  (1) why it is written that LGWR writes Archives newspapers and not ARCH process? Is this some sort of error doc. ?
  (2) what is the reason that LGWR sends redo changes made to the FIU to the instance of the same (primary) cluster? What is the purpose? What happens if it has many nodes in the primary? This means that this instance would be multicast it to each of them in this way?
  (3) on the backup site: MRP is located on the D instance in this scenario? (1 single standby instance is applying the data but several can recive redo and write it to the SRls)?

  (1) why it is written that LGWR writes Archives newspapers and not ARCH process? Is this some sort of error doc. ?
  Yes, it seems that this picture has been simplified, and it does not show the level of appropriate detail.
  (2) what is the reason that LGWR sends redo changes made to the FIU to the instance of the same (primary) cluster? What is the purpose? What happens if it has many nodes in the primary? This means that this instance would be multicast it to each of them in this way?
  This shows what we call "cross instance archiving". If you enable this, one storing data on multiple nodes. So if you are in a cluster, and archive locally, if this node dies, so how you get that archive the data to retrieve, put the archives in several places gives you extra security for those who are paranoid. I think that it was more useful in the days where Oracle shipped just archiving logs, now that lgwr writes to the remote node, you are less likely to need it.
  (3) on the backup site: MRP is located on the D instance in this scenario? (1 single standby instance is applying the data but several can recive redo and write it to the SRls)?
  Yes one instance applies to the remake.

• Where can I ask a handful of general order questions about Firefox OS as a consumer and get the answers? (a forum or something similar)

  I have about seven questions about Firefox OS. I'm potentially interested in opting for a tablet that works instead of Android or iOS. I couldn't find a place to ask questions like that. Thank you!

  https://support.Mozilla.org/en-us/forums/Firefox-OS-English-Forum

  There is another option.

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• Where and how do I ask questions about Email?

  The Commission opening thingy is complicated, I have trouble finding my way around it.  I don't know where or how questions about email.  Is there an easier way than trawling through all these icons?  Like a list or something - as you get on all other forums on the internet?

  It would be a good starting point: Mac mini

  Or the appropriate under MAC Os and system software section.

  You might also find this useful: find answers and new questions