Various Questions about wireless access controller

Similar Questions

• HP a6700f - a question about wireless

  My tech savyness is about 9 years old so I don't know that rather this computer has wifi or if it's just a regular wireless adapter that it a. I looked inside and it says G79G on a long order paper after that. The information on this site page says there's a wireless 802.11 adapter. I think it's wifi, right? So I searched in google and found a few pages we're talking about wifi and wireless. Is the adapter wireless provided with this computer, wifi by chance? I need to know because next week I go on vacation at redington beach Florida for a condo that has wifi. And I won't be disconnected from my online friends that I talk to every night. I'd hate to have to rent a laptop if my own computer can connect. At home, it connects to my router netgear very well. It look right. I was happy with this computer since the day I got it. I'd feel strange using a rental.

  You shouldn't have a problem with the help of your adapter on your PC wireless to connect to another hub wireless "wifi" at least safety becomes an issue.  You may need a password to sign on the wireless hub.

• Many questions about Wireless - A30

  I was wondering if someone can help me. I have an A30 (512/2.8) and I am due to get broadband installed and wanted to have a wireless connection. I am aware that the series of satellites have a Wifi feature, but I'm a little uncertain about how to establish the wireless connection. Do I need a card network in addition to the router or just the wireless feature will be enough?

  In addition, my LED does not illuminate when I flip my switch wireless, I assume that the light comes on only when it is connected to another device and won't come alone?

  Thank you.

  Hello

  As said Sylvain, you can use a card PCMCIA wireless network or WLan USB stick.
  Will you please google a little and I m you will find a suitable solution.

  Good bye

• Usually the questions about wireless

  I have a Toshiba laptop, and it has wireless lan card. He pops up she found a connection, and then it says to connect but when I connect and the realization of the connection, it appears and asks for a network key?

  What is c?
  It also comes with blue tooth.
  Any help on this please!

  Hi lucodunlami

  Looks like you are a beginner and don't know anything about the Wlan technology or login.
  I think that you have activated the Wlan antenna and the laptop looked for available wireless networks.

  The operating system supports an option to connect to a WLan that is available near the laptop.
  For most wireless LANs are secure and encrypted. If you n t know the encryption key (password) you can not connect to the Wlan key.

• Question about wireless, routers and network adapters... hope is the right place for the?

  I have a modem to my cable service and I was told that I could network 4 (3 desktop computers and 1 laptop) computers. I plugged the modem, I plugged the router up... i put in the disc of the cable operator to make the wireless network and it does not connect them for some reason any. the cable service representative didn't tell me, I would need something more, but would need one of these network adapters wireless that goes into the USB port on the back? the computer on which the modem is hung up works fine... it's one of those self install the things I told them that I'd rather have a tech cling to me but they insisted that I could do... (obviously any fool can do, I'm not a fool... I'm just stupid! lol "title =" Smiley Tongue"/ > can someone just tell me if I would need one of the cards or y at - it a way to tell if my computers are ready for the wireless... I have 2 dimension E310 XP media center copmputers... is tehre a way to check whether she would need the adapter or not... hope I explained everything properly...) Thank you bunches! antkaki [renee]

  third time to post my question, don't know why it is being deleted... someone can let me know?  Thanks again

  
  

• Question about web access install

  Hi all

  Can you please help me answer this question.

  setting up web access on VC is optional or not? as far as I can see, Web access is automatically installed with VC. all you need to do is specify ports, but after reading this text on web access pdf Pub, now I confused.

  -

  ---

  VI Web Access is installed when ESX Server is installed. On the VirtualCenter server, you

  can install VI Web Access from the VirtualCenter Server Windows installation package

  -

  ---

  I tried my self installation of VC but I have not any Web Access option select/deselct option

  Please clarify this point for me

  Thanks in advance

  AJ

  Hi all

  Question of Ajay on access Web is a good thing, let me clarify.

  Components access Web are automatically installed with ESX Server and vCenter Server.  At some point in the history of the product, there is an option during the installation of VirtualCenter, where you can choose to install Web access or not.  This is no longer the case at 2.5 or 4.  Web access is also enabled by default previously.  In my last use of the product, I find that the service on vCenter Server is already started, which means that Web Access is running by default.  For ESX Server, the access to the Web server is not running, but can be easily launched.  It's for vSphere 4, so fellow users, you can add what is the default status VI3 if you run this version of the product, so we have that here as well.

  Kind regards

  Jon C. Hall

  Technical developer certification

  VMware, Inc..

• Edge of 530 slow wake up and question about wireless relatively to sleep

  Hi, I have a 530 advantage, I got it 2 weeks ago, running on windows 7 64.

  I found that on its quite slow to wake up default settings, I made a change that has been to the wireless card, I checked the allow my system to disable wireless to save energy (so it stays on). This seems to have made an immediate difference and the laptop wakes up now a lot faster.

  The problem now is to have this option checked, when my laptop wakes the without wireless is disabled when he wakes up and will not turn back, I have to turn it on manually. If I leave the power save option checked for the wireless card, that it automatically connect when my laptop wakes.

  Seems a little odd I thought uncheck the option to allow my laptop turn wireless off means he must just stay on, but he seems to have the opposite effect.

  Can someone advise? everything I wanted, it was for my laptop to wake you up more quickly and the wireless is turned on or auto connect after he wakes up.

  Thank you

  James

  I found myself the answer to this question, I found that I had to uncheck the same box in the bluetooth device, it does not work exactly as I wanted to and the wifi connection is more lost once I wake up my laptop

• Various questions about the Skype call abroad.

  Hi all!

  I'm recently cheated by my phone company, so I plan on starting to call Skype to landlines and mobile phones. I've always used Skype from one computer to another, so I really have no idea how the Skype call would work from a computer to a phone. Phone of the receiver must be connected to one internet line in orden to receive the call?

  Even more stupid question: How does all this work?

  I live overseas and it is thought only to be able to call my family in my country of origin, which is both fixed lines and some mobile phones.

  Should I create a new number (or number will have for me), or will I use my Skype ID for calls? And how can they call me?

  Thanks in advance for your patience

  / S

  You can call any phone Skype if you have a subscription or credit.

  https://support.Skype.com/en/FAQ/FA34608/call-phones-from-Skype

  If they would be able to call from a phone, then you need a Skype number.

  https://support.Skype.com/en/FAQ/FA331/what-is-a-Skype-number

• Question about wireless connection

  I recently bought a laptop and I would like to try the version for this laptop's wireless, but the book information tells me to press the switch on the right to turn on the system. Looks like it is blocked?
  Any suggestions to fix this?

  In my opinion if there is no wireless switch there is no ability to integrate into the wireless card because there is no antenna. As said Miro PCMCIA wireless card is the best solution.

• An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  The error was: "an existing connection was to be closed by the remote host".
  (0 x 00002746 WSAECONNRESET error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps

• Questions about syncing wireless keyboard and mouse 5000?

  How can I sync my old 5000 for a new mouse 5000 keyboard and the receiver?

  Hello Eamon,

  Welcome to the Microsoft Community Forum.

  According to the description, I understand that you are facing problem when connecting the new Microsoft mouse USB dongle receiver with the old keyboard Microsoft Wireless 5000.

  I suggest you to contact the Microsoft Hardware support for assistance.

  How to contact Microsoft if you have questions about your hardware device.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• questions about 2100 wlc and lwap connection

  Hello

  I have a few questions, I hope you can answer me.

  In fact, I have a controller connected to 3 Lwap 2100, and they are connected to the WCS. they have a static IP address.

  The distance between each point of access to more than 30 meters.

  1. the distance between the access points affect the accuracy or the stream. How can I calculate this

  2. because the APs use a static IP address, each customer should I connect to the network to add a static ip address? can I do the APs detect clients dynamically?

  I have lwapp reset guide, guide WCS configuration and configuration guide for WLC. If you have more documents or more pls share with me.

  BR

  Yamani

  Hello Ahmed,.

  Yes the distance between AP affect the wireless signal.

  to determine the best location of AP and the distance between them, as the site survey is necessary with the expert of the spectrum wireless or airmagnat...

  You can check the following links for design and RF management

  1) http://tools.cisco.com/squish/1Ea09

  2) http://tools.cisco.com/squish/51a58

  for other questions about DHCP, it is not a must that customer use static IP, you can always configure them with DHCP.

  as an extenal DHCP (like windows server), or on the WLC himself (to the title of controller-> > internal DHCP tab).

  Kind regards

  Talal

  =========
  Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find

• Questions about the implementation of clusters of storage and DTS on active cluster

  I have a few questions about the implementation of clusters of data store and SRS storage in VSphere 5.1.

  We have a data center with about 15 HP blades and a few servers non-lame.  The hosts are all either VSphere 5.0 or 5.1.  Our back-end storage is an EMC VNX 5700 with about 20 stores of data.  All the VMWare is managed by VCenter 5.1 running on a dedicated physical machine.

  Currently, each data store is used individually; No piles of data store are put in place.  When a new virtual machine is created, the administrator usually chooses the data with the most space store.  Periodically, we will go back and manually storage vMotion machines to balance the load.

  Recently, we have expanded the VNX storage, so we now have LUNS in different pools, with different levels of performance.

  What I would do is set up for the data store clusters, so that us when a virtual machine is created, the administrator must not know what data store is in which pool.  Also take advantage of the DRS storage so that the burden of storage will be "refine" himself a little.

  I know the setting up of a cluster of storage in a 'clean' environment is quite simple, but my concern is creation/conversion data warehouses existing in active production in the cluster, while they are used.

  If I access the screen "data warehouses and store data from clusters ', right-click on the data center and create a cluster, and then move the various data stores in the new cluster, will there be an interruption in the production running systems?

  I also wonder about activation of storage i/o control.  It is not currently enabled on data warehouses.  I know it's useful for the StorageDRS, but will be allowing any negative impact on the system?  If I turn on the warehouses of data, is there anything else I should do or set in addition to all that allows him?

  Finally, we are in the process of Site Recovery Manager configuration.  SRS has an impact on the configuration of the data clusters and DTS store?

  Thanks in advance for your comments.

  Mike O.

  Gregg Robertson wrote:

  Hello

  Clusters of data and using DTS store doesn't impact RS even if you create a cluster of data store for storage of replicated data and another for everyone else, this way you machines virtual you want to replicate are not moved on warehouses of data that are not replicated , but will still have the ability to move if there is a conflict.

  Gregg

  With all due respect but SRM and DTS don't go together. SRM does not at all support the use of DTS. So if you are configuring SRM forget DTS for now.

  Reason for this is that SRM knows no DTS and VMs can be in flight when a failover should occur, and bad things can happen. Also, the protection breaks when a virtual computer is moved between data warehouses in a cluster data store.

  In short: don't go there.

• Question about RAM CL

  Hi guys. I'm finalizing my PC build and I have a question about ram CL I can't find answers for hackers page here. http://ppbm7.com/index.php/news/planning?showall= & start = 3

  I would use these two RAM sticks for example.

  Module 240 pin DDR3-1333 transcend JetRam™ 8 GB High Performance: CL9, layer 6 circuit board

  Transcend JetRam™ High - Performance 8 GB DDR3-1600 240-Pin Module: CL11, 6 layer PCB, ultimate card stability and cross-platform compatibility

  My question is, what is the best for video editing? On the one hand we have 1333 mhz to with a CL of 9. On the other hand, we have RAM 1600 mhz faster, but at a higher CL of 11. Now, I'm not one to get caught up in the technical aspects as it may seem, but I don't understand so I can make decisions, especially when price is a factor. In this case however, they are at the same price...
  

  Well good for video editing, important criteria for RAM is:

  • Never, never crashes - it is very important; choose only RAM sticks (certified QVL) certified provider and do not use unmatched sticks
  • Speed; faster is better - while true also, past at the speed of the RAM, or lowering of the CASE wait cycles (latency) contribute to the speed, but the gains are very low; Faster RAM is hardly perceptible vs CPU speed more fast which is very sensitive (I played with it a lot on some versions overclock and test first with PPBM speed and speed up the processor 5% performance contributes to 5% where speed RAM about 30% can speed up about 1%)

  Google "what is the CASE for the RAM" and one week at self-teaching yourself if you want to even begin to really understand speed RAM! I know enough to know there is a lot to learn about the subject. The good news is that you don't need really to know a lot to build a reliable, excellent for running Adobe products, including the first, Photoshop and After Effects:

  • Use only RAM who has certified the seller of memory for your motherboard; do not assume that if the seller indicates a set 4x8Go of sticks that will work with your motherboard that two sets of such RAM will work with a card mother 8 locations either! (too late to discuss here, but various factors may override the controller memory in the processor itself - factors include voltage RAM, number of sticks, RAM clock, status of CASE of waiting settings speed, voltage of the cpu memory controller and maybe more)
  • Increasing the speed of the RAM always helps if slightly for first speed up to 1600 MHz (for x 79 in any case) and wins the speed of RAM which are still lighter

  Now, back to why both sets of sticks are the same cost. They most likely use the same chips of RAM, which is an important factor for what it costs to build the RAM sticks. While the Asus motherboard you buy allows full customization of many, many, many things, unless you are an extreme Overclocker and plan to spend a few weeks to fine-tune a new simple version you in the bios of motherboard and it say to use XMP settings. This indicates the motherboard, how to set the speed of the RAM and sticks of timings CASE for your particular RAM with the settings the seller intended.

  You really know a lot about what you are doing to set the timings RAM in any way other than the simple choice of XMP settings safely. And, you can easily burn your CPU if you don't know what you're doing and you choose some really bad parameters.

  Kind regards

  Jim

• New in AS3: stupid question about event listeners...

  Hi all

  I am a newbie in Flash and have a question about event listeners. I have a site I'm developing with a movie clip navigation which is composed of several buttons. What is the right way to write the event listener?

  Here's a sample of what I have:

  I have a clip called 'buttons_mc' that contains the symbols of individual button with various names such as "btn_history". So far, I don't have an instance name for the clip of the film itself.

  My event listener:

  btn_history.addEventListener (MouseEvent.CLICK, history);

  I have to put something before the "btn_history" which refers to the video? I get this error message:

  1120: access of undefined property btn_history.

  Thank you!!!

  Julia

  Yes, it is preferable to have at least one layer dedicated to actionscript.  I often use a couple... one for code shared (functions and variables) and a level of the frame code (stop(), etc.).

  The code must be in a scenario where the button is directly accessible.  If your button is accessible in frame 1, which means that it does not animate in place such that it is not really intended to be used until you get somewhere near the bottom of the timeline, then you can target the button of the timeline that holds the buttons_mc movieclip.  So as I described earlier, if you give this movieclip an instance name of "buttons", and then to assign a code to the button on the inside you should use...

  Buttons.btn_history.addEventListener (MouseEvent.CLICK, history);

  But if the button exists somewhere down the timeline inside the buttons_mc due to the animation of the button, which means that there is more than one key image for the button, then you must place the code that you have initially shown in the last keyframe to the bottom of the timeline where he set the button in place.

  .