A race around multiple objects

Similar Questions

• Creating generic actions for multiple objects

  Hello world

  It's something I have interviewed on during some time and am finally get around to him asking.

  I want to simplify the coding and I was wondering if there was a way to write a script that could be used on multiple objects without having to write it to treat each object individually.

  I build a simple menu, where I want the menu link to increase and intensify when the button because it is reversed and then return to its original position when the mouse leaves. I know I can write this by button and point, but wanted to see if there was a way to write once and then apply the action to all.

  E.G.

  My menu is composed of 5 elements (and the respective buttons) home_mc (home_btn), menu_mc, dining_mc, contact_mc, specials_mc.

  If I write the code

  home_btn.addEventListener (MouseEvent.MOUSE_OVER, homeOver);

  home_btn.addEventListener (MouseEvent.MOUSE_OUT, homeOff);

  
  

  function homeOver (MouseEvent) {}

  TweenLite.to (home_mc,.25, {alpha: 1, scaleX:1.25, scaleY: 1.25, x: 150,8, y:273}); })

  }

  function homeOff (MouseEvent) {}

  TweenLite.to (home_mc,.25, {alpha:. 75, scaleX:1, scaleY: 1, x: 157, y:280}); })

  }

  This will only apply to the home button. I want to be able to use this effect for each button in the menu, however.

  I know that's not the Tweener class, so may not be as well supported here, but I can go to one if necessary.

  Can I write this while several objects may be affected by the same code?

  home_btn.addEventListener (MouseEvent.MOUSE_OVER, homeOver);

  home_btn.addEventListener (MouseEvent.MOUSE_OUT, homeOff);

  
  

  rOver (MouseEvent) {} function

  TweenLite.to (GENERIC OBJECT,. 25, {alpha: 1, scaleX:1.25, scaleY: 1.25,RELATIVE VALUEx:, y:RELATIVE VALUE});

  }

  function rOff (MouseEvent) {}

  TweenLite.to (GENERIC OBJECT,. 25, {alpha:. 75, scaleX:1, scaleY: 1, x:VALUE RELATIVE, y:RELATIVE VALUE});

  }

  
  

  function homeOver (MouseEvent) {}

  ????

  }

  function homeOff (MouseEvent) {}

  ????

  }

  This could be pie in the sky, but I don't know if I'm not.

  Why not just add the invisible area of these attachments menu? You can always have a single invisible clip - and place instances of it in each button... No real reason to keep them separate is there?

  If you must keep them separate so that you could use a convention assignment of names - like invis0, invis1, etc. and menu0, menu1, etc.. Then you might do something like:

  invis0.addEventListener (MouseEvent.MOUSE_OVER, expandItem);

  invis1.addEventListener (MouseEvent.MOUSE_OVER, expandItem);

  function expandItem(e:MouseEvent):void

  {

  var invis: String = e.currentTarget.name.substr (5.1); to get the index

  var menuClip:MovieClip is this ['menu' + invis].;

  TweenLite.to (menuClip, 1, {scaleX:1.25, scaleY: 1.25});

  }

• Borders dotted around some objects, when you click

  It's the only issue I have with Firefox-on some pages (pages of Mozilla, the new tab, Facebook page, etc.), when I click on a link, there will be one incredibly ugly border dotted around the object. I tried to reboot in safe mode, and it happens on all versions of Firefox (regular, beta and Aurora). I did not have this problem with all other browsers, it's just Firefox and I can't understand why. assumptions?

  It is an accessibility feature to display a ring around an object.

  • http://KB.mozillazine.org/browser.display.focus_ring_width
  • http://KB.mozillazine.org/Accessibility_features_of_Firefox

• [Q] can Vision track multiple objects in the same area - objects that might cross?

  Hello

  Sorry for this long title, but this is my question.

  Can Vision track multiple objects in the same area - objects that could cross?

  Because I'm able to do, extraction of XY, but it seems that "IMAQ County objects ' don't follow framework after but framework opposed, but extract the coordinates XY always in the same way, as for example from top and whenever he sees an object, it retrieves the XY, but if the objects pass through (then it will extract XY without worrying that the objects was the earlier but just based on"scan from top to bottom").

  That's why I open this topic in the forum of Vision no part: http://forums.ni.com/t5/LabVIEW/Sort-XY-by-closest/td-p/2440428

  Thank you

  Sébastien

  Thank you for your response.

  My problem is that we work with very small insects and the shape/color is the same for all.

  Then the solution is: Let's wait for "IMAQ County objects 3 ' then .

  Thank you

  Sébastien

• Grey outline around the objects when exporting to Photoshop

  Hello

  I have a strange issue when exporting with a simple badge that I'm working on Illustrator to Photoshop.

  Everything seems well within the Illustrator, but when I select my creation and copy and paste into Photoshop, then as a "dynamic object" or "pixels", I get a strange gray outline around the objects that should be hidden.

  I use the latest versions of Illustrator and Photoshop 2015 CC and their installation on Mac OSX El Capitan v. 10.11.3

  Edit: I noticed that the compression of the screenshots, it is difficult to see, but it should be very obvious if you download AI and try it yourself.

  I link to the file: http://bit.ly/1QhIi6i

  Best regards

  Rasmus

  

  

  

  

  I think that the problem is more on the side of Photoshop.

  Rasterize the objects in Illustrator; no visible lines.

  Pixelation in Photoshop; the Ant-aliasing artifacts.

  It is easy to reproduce: put a couple of black oval overlaid. Use Pathfinder > divide

  Now you have perfectly fitting distinct forms.

  Copy and paste into Photoshop; lines.

  Rasterize them (or use the pixelation effect) in Illustrator, copy and paste it into Photoshop. no lines.

• I have the text on a shape described triangle, and I want to just cut the race around the text of the shape?

  I have the text on a shape described triangle, and I want to just cut the race around the text of the shape?

  Please see the establishment.

• String of text around an object?

  Hello! I tried to create a box around a shape, in this case a car. It's a bit like making a text to wrap an object autour , not along it, not on the border. I want the text to be everywhere, except on the object.

  But every time I have to create the path and click the cursor somewhere on the way to work the text comes from if poster normally and don't deform. I saw a lot of videos on YouTube all that but they never wrap the text around the object in its entirety, they make the text box on one side. Is it possible to create the area of text around the object in its entirety and not only on either the left or right of it?

  Info:

  I chose the path of work before you click in it.

  I tried to make a selection in shape, but it did not work like that either.

  I use the latest update of Photoshop CC Windows 8.1.

  

  No, this cannot be done unless you manually insert spacing. The text ends only the path from the inside, and the path cannot be a complex path with a hole in the middle where the car is.

• Wrapping text around an object group

  I use CS 6 and when I have an image without text to top group and try to wrap the text around the object group my text disappears. I am referring to the text which is superimposed on the picture, not the text that I drove around the object. I don't have this problem in earlier versions of InDesign. What I am doing wrong?

  Select the block of text, right-click, choose Activate and text frame options ignore skin.

• A text will not wrap around the object. Some does. Anyone?

  I worked in InDesgin (currently the CS6 for Mac) for many years. I'm not an expert, but fairly well-versed and comfortable with the program. I think I know almost everything about the wrapping of text and its options and how it works. But it drives me crazy.

  I have an imported MSWord part of the text. I have an item I want to insert in the text. Normal procedure. Easy. But this text will NOT wrap around the object. What about other texts? Yes. Other text in the document wrap around that object even very well.

  I rebooted the computer and the program. Check the settings as much as I can think and even spruced up the document from scratch as a MS Word document. Yet, no film.

  This happened to someone? What is going on? Help.

  Check the options of text block for the text that will not wrap. Ignore text dresses it is checked?

• Scale multiple objects, with the Center as a reference point, without moving the Group

  Hello-

  I want to scale multiple objects, their Center, without moving the group. I found how to change the objects of the Centre (setting of the reference point in the transformation to the Center and using the free transform tool Panel), but I would choose a bunch of objects and move towards the top of the Center, without the group get larger.

  I want to use it for the highlights on the plans. Say I have 25 small circles with numbers in them on the plan and I want to blow up to 200%, but I want to stay in the same place, is it possible to do both? Or do I have to re - intensify each object individually? The problem that I am running is even if I'm upgrading the scale objects from the Center, the moving objects and losing their place on the map. So, I made each of them individually.

  Thanks for any help!

  Not quite what you want, but if you make one, you can select the rest and the object > transform again > transform again individually.

• Change the attributes to multiple objects in the overview

  Hello!

  I'm sure that the answer to that is pretty simple, but I can't get the effect so I post here on this subject.

  I want to configure an object (such as a logo) where, when you go over it, change attributes for multiple objects.

  For example, if I have a white box, with three different lines of text inside it, when you hover, I want the box to become black, one of which becomes green to become blue text and a line turn red.

  But when I put this up, the text color changes when I hover over each line of text (they are in different text boxes) not when I fly over the area as they are.

  the only way I found to do this is by using the status button widget, but I don't want to have to use to do anything where multiple objects must change state.

  Thanks in advance

  -Connor

  Hey Connor,

  You can use a widget of composition to achieve this effect.

  Keep the trigger and transparent target filling and place of relaxation on the top of your Logo.

  Now you can put the modified content (as you want on turnover) in the target container and place it exactly on top of your original content.

  Please refer to the video (see the widget part) who could help: Adobe Muse: Customize Widgets - YouTube

  Let us know if it helped or not.

  Kind regards

  Akshay

• A * long * oribiting text 3D around an object?

  There are many tutorials where we can see how to make a text in orbit around another object. Here is an example of the text around the sphere. My question is - how do exactly the same, but with the text longer that could fit on the circle around the object?

  For an example, let's say we have the text: "Marry Christmas and a happy new year!" (or a much longer message). Because all the text cannot fit on the circle, only a shortest substring can take place on the circle at some point in time:

  Marry Christmas and a ha

  arry Christmas and a pad

  carry Christmas and a happ

  Ry Christmas and a happy

  etc.

  Here, of course, would be a discontinuity in the text on the circle (ongoing) - but he could hide behind the object.

  I could imagine making a way in the form of Ribbon long enough to contain the entire text and the party abandoned the Ribbon hidden behind the object, then it would look like the desired - but I wonder If there is a way to scroll long text on the path closed circular .

  Create a new model, the height of your string of text with the same width as your main computer.

  Add your long text string and dont worry this case may extend beyond the limits of the model. Animate the position of a text layer so that it crosses the screen.

  In a new publication import model of the text and apply CC cylinder twice. Put the layer you want to obscure the text between the two instances of CC cylinder and set one to render inside and the other to return to the outside.

  Quite. EZ as pie.

• Separate an object into multiple objects w / Pen

  I am looking for a way to draw a single object, solid and then divide the object into multiple objects by using the pen tool. no other objects.

  Ex: Draw a solid cirlce, use the pen tool to draw lines on this circle (visually by creating different forms), then [be] with the original circle and lines drawn in pen to create the new objects/shapes.

  I've done this before by placing other OBJECTS on the original object and using the fracture or pathfinder trim switches, but using other forms (even online) has its limits.

  Any ideas?

  CS6

  Dan,

  We are not just talking object > path > divide objects below (when the drawn Pen path reaches or exceeds the paths below), are we?

• Paste multiple objects in the frame

  Hello everyone

  I was wondering if anyone could shed some light on how better to paste multiple objects in a single image.

  Mainly, I am trying to nest objects that are part of a newspaper article header; Since this is a design element that continues to be repeated with every single item I don't want to spend time with positioning manually the items each time - this is tedious and prone to carelessness.

  Unfortunately, the basic chassis will be about three items that need to be nested within it. Once I have paste an object in an image, the next time I make "Paste"- content (previously pasted object in this case) just gets overridden.

  I read that to paste multiple objects into a single image, you must group the objects first. Now, this works well enough for them to enter the framework, but leaves me with no options to position them against the frame. I can't move or position an object individually, and I have no option to separate them once they were pasted.

  Here's a small model to describe my particular situation:

  

  Ideally, I am objective is to have the main header image to contain content of nested objects and for that it is flexible enough so that I can quickly it spread over several columns according to the requirements of article.

  ! kRON says:

  The idea of using tables is fantastic! (Now I'm a bit embarrassed that it never occurred to me)

  Really, it gives you more precise control of the flow of your content with rows and columns. As the content of each row/column develops, we must push the rest of the rows/columns. This way I can ensure as the title or title extend over several lines, so that I can also use my design conforms intercellular like I did before INSET.

  It's great and really brought my hopes! I would apprecite if you could leave just a smally answer so I can mark this question was answered that I accidentally pressed 'Useful' instead of 'correct '.

  I'm glad you found it useful.

  I was faced with limitations of embedded image, but until I saw your particular example with its-like arrangement of the elements, I do not think that tables as a solution.

  Kind regards

  Peter gold

  Know-how ProServices

• Extract data from multiple objects of BAM

  If you send data to multiple objects... Controls object and object elements, you can bring together them for a BAM dashboard? Or are you stuck with pulling of an object for your reports? I can't find any documentation on this... all of the examples I can find point from the data of an object.
  
  Thank you
  
  S

  Yes, you can join several data objects using the fields look (this is equivalent to JOIN in SQL). Please see documentation BAM on search fields. You can find it in the developer's guide in the chapter "Creating data objects," in the section "how to add search columns to a data object.