A reinstall of Windows SP3 will set my automatic boot DVD-ROM failure?

Similar Questions

• What is the probllem when Windows XP will not update. Receive an update failure message.

  What is the dif when Windows XP will not update. Window security KB2619340, KB2656353, KB2585146, KB2631893 and KB2585542 could not be updated. How can I fix the problem.

  What is the dif when Windows XP will not update. Window security KB2619340, KB2656353, KB2585146, KB2631893 and KB2585542 could not be updated. How can I fix the problem.

  Could be one or more of a number of things. Malware is a. You are able to install other updates. What is your current antivirus software? Have you tried to install the updates with the disabled anti-virus?

  Run the automatic fix when you visit the link HERE. Try the updates again.

• my computer hp laptop window xp does not see his CD/dvd-rom after fomating of the system

  How to restore my CD-ROM/dvd-rom for my system again? This has happened once the system has been formatted. HP Windows xp

  Hello

  You receive messages or error codes?

  This can happen if the CD\DVD drive requires updates to the firmware or need to assign a drive letter for the same.

  Since you formatted the Windows XP system, you can check out the link to HP support and check if it helps.

  CD/DVD drive is not detected (Windows XP, ME or 98)

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  We can also refer to article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important: The article mentioned above, including the HP support article contains steps to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  How to back up and restore the registry in Windows XP

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Windows vista installation - itunes loss of cd/dvd-rom

  I installed the latest version of itunes yesterday and my computer does not recognize the cd/dvd ROM. I removed the itunes and everything is back to normal. I repeated the process with the same answer. I have windows vista with service PAC 2. Please guide me

  Hi Skoopytintin,

  I suggest to see the following Microsoft Knowledge Base article, then follow the steps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  I hope this helps.

• Windows xp pro sp3 will not start corrupted boot.ini and hal.dll - please help

  I installed Norton 360 offred via internet was last updated.  It immediately launched all applications previously disabled at STARTUP in msconfig.  And shortly after he started to gives me the blue screen "to the death".  This done in two days, and I was desperately trying to solve the problem by turning off almost all applications critical to running Windows XP Pro SP3, Norton and Office 2007 Home and student.  I even went and tried to edit the Boot.ini file in startup and recovery under the Advanced tab in the workstation properties.  Now all I get is an error message Windows cannot start because the hal.dll file is missing or damaged.  I replaced it by copying a modified version of the boot sequence, while the hard drive of my laptop was enslaved to my desktp PC, but nothing helped.  I can't even the Recovery Console to start on my laptop.  I need HELP, please.

  These profile errors are usually caused by one of the following:

  1-profile corruption.  The user profile is damaged and that Windows cannot load.  To resolve this issue, create a new user profile and move your files to the new profile.   See here for more information:

  How to copy data from a corrupted to a new profile in Windows XP user profile

  2 drives or corruption of the file system.  Run chkdks /f on the volume C:.  Please note that there is ALWAYS a risk of data loss when chkdsk is run on a volume, ideally, you should have a backup of your files before running chkdsk.

  3 - virus or malware activity.  Some of these parasites can revoke your permissions on the folder of your profile, check the permissions on "C:\Documents and Settings\Andre" and make sure you have a full control on the folder.  Check this box until you try #1 or 2 above.

  Some of these parasites can also revoke your permissions in key areas of the registry and create real Dany on the machine that can prevent you to run some of your software.  Use Regedit to load your old profile hive (NTUSER. (DAT) in your profile folder (C:\Documents and Settings\Andre\NTUSER. (DAT) and make sure you have full control over the key.  In the advanced security settings to ensure that the child objects are inherit permissions from the parent and put a check mark on "replace entries permissions for all child objects...". "Click on apply and OK your way out.  See here for easy to follow instructions for loading and editing of remote registry hives: http://www.rwin.ch/xp-live/regedit.htm make sure you unload the hive when you're done, otherwise the changes will not be saved.

  These parasites can also revoke permission on the other key of registry and system files, you can use SubInACL to restore your permissions on these key objects, see here for more information:

  Solve installation errors using the SubInACL tool to repair the file and registry permissions

  John

• Windows 7 will not activate after a hard drive failure

  I tried the phone activation option and it will not work. IM assuming that it's because I reinstalled windows once before, the upgrade from 32 bit to 64 bit. Im not sure what to do and id prefer not to buy another copy of windows. My computer specs are as follows:

  OS: Windows 7 Home Premium
  Motherboard: Asrock Z77 Extreme 4
  CPU: Intel Core-i5 3570 k
  GPU: NVIDIA EVGA GeForce GTX 560 Ti
  Help, please! Thank you!

  Use the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 8 will support external drives to dvd of windows 7.

  I love windows 8 and surface pro and I already have a usb for surface pro hub and I was wondering if I could easily connect a windows 7 external dvd drive with windows 8 installed. And also I will have to get a usb 3.0 hub because my hub usb is only 2.0 because I am pro surface.

  Hello

  1. What is the brand and model of the external DVD drive?

  Almost all feature works great on Windows 8 preview version, which were already working on the Windows 7 operating system.

  Verify that the device is compatible with Windows 8 from the following link:

  http://www.Microsoft.com/en-us/Windows/compatibility/en-us/CompatCenter/FAQ

  Yes, you will have a USB 3.0 port on the Surface Pro.

  Hope this information is useful.

• Windows 8 will not mistake The Boot Configuration Data file is missing some required information.

  Yesterday, I downloaded Windows 8, and although using it was confusing I got the hang of it. Today, I used the computer again and everything was fine but then I stopped him and a few hours later, when I turned it on a blue screen appeared and he says:

  Recovery
  Your PC needs to be repaired
  The Boot Configuration data file is missing some information required.
  Leader: \Boot\0xc000000d
  OT: After victory. Download 8 it won't launch
  I have no idea what is happening or how to fix it. Any help to help me understand and solve this problem would be appreciated.

  Met the same question from one day to the other - re install Win 8< week="" old="" decided="" to="" misbehave="" on="" a="" reboot.="" nothing="" untoward="">

  In any case discovered that the automatic startup repair is less useless for me. He could not fix anything whatsoever after the diagnosis and just gave up.

  However, resort to repair (start your windows installation CD) command line prompt, I managed to solve it with the command of the ffg on the command line.

  Bootrec /rebuildbcd

  More info about bootrec available using your favorite search engine.

  for example, this site was useful for me

  http://superuser.com/questions/451277/missing-boot-files-in-Windows-8

  For users in previous posts with problems and have only a version downloaded to Win 8 - well I'd say that you yourself create a DVD of the version uploaded to win 8 - the installation program ask you if you want to create media - that will create a 4.x GB. ISO file that you can burn to DVD. There is enough information on how to do this just search online.

  With regard to creating a way to initiate Win8 installer from USB Eh well I heard the ffg tool works with Win 8 too but cannot vouch for her since have never tried so its at your own risk.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool?ClickID=ckqs4fqifskwfnxlpiwkzwxqwwwzlvvlezzk

  Good luck, have fun,

  See you soon

• XP Pro SP3 will not update automatically

  My XP machine run are no longer updated Automatic; It started this week.  The "shield" appears in the lower right hand, and a download of updates 0% is displayed when I roll the cursor of the mouse on it.  When I try to go to the Windows Update site, I get a 'The Explorer cannot view the site,' when I click Update automatically, I get a message 'check to see if you have the correct update software', which then triggers a "site has encountered a problem and cannot display..." "I also have a message"Explorer cannot view the site"if I try to click on the Windows Update Web site from the Security Center.  Also, I started to do the boring site redirects these cretins: http://lpgen.info/mylpgen/regerrors1/64x1219458_r1?c=camp3 as well as the so-called News9 which is really an artificial site for a pyramid scheme.  Someone here must know what is happening; care to share?  If this computer is infected, I also approximately seven years, digital photography on a series of RAID disks and external sources, which are now disconnected from the computer and the sitting idling.  Unfortunately, until I get all this problem, so is my idle sitting company.  Appreciate all advice/help/solutions.

  Alan

   

  photostaats wrote:

  My XP machine run are no longer updated Automatic; It started this week.  The "shield" appears in the lower right hand, and a download of updates 0% is displayed when I roll the cursor of the mouse on it.  When I try to go to the Windows Update site, I get a 'The Explorer cannot view the site,' when I click Update automatically, I get a message 'check to see if you have the correct update software', which then triggers a "site has encountered a problem and cannot display..." "I also have a message"Explorer cannot view the site"if I try to click on the Windows Update Web site from the Security Center.  Also, I started to do the boring site redirects these cretins: http://lpgen.info/mylpgen/regerrors1/64x1219458_r1?c=camp3 as well as the so-called News9 which is really an artificial site for a pyramid scheme.  Someone here must know what is happening; care to share?  If this computer is infected, I also approximately seven years, digital photography on a series of RAID disks and external sources, which are now disconnected from the computer and the sitting idling.  Unfortunately, until I get all this problem, so is my idle sitting company.  Appreciate all advice/help/solutions.

   
  What software AntiVirus were / are do you use?  Is it updated and it is now up to date?
   
  Restart, and then log on as an administrative user.
   
  Download, install, execute, update and perform a full scan with the following
  (freeware version):
   
  SuperAntiSpyware
  http://www.SUPERAntiSpyware.com/
   
  Restart, and then log on as an administrative user.
   
  Download, install, execute, update and perform a full scan with the following
  (freeware version):
   
  MalwareBytes
  http://www.Malwarebytes.com/
   
  Restart, and then log on as an administrative user.
   
  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
   
  Restart, and then log on as an administrative user.

   

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe)
  
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
   
  Restart, and then log on as an administrative user.
   
  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your drive C:\.  After having save to the root
  
  the C:\ drive, follow these steps:
   
  Close all Internet Explorer Windows and other applications.
   
  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.
   
  (If asked, select 'run.) --> Click on NEXT--> select 'I agree' and click
  THEN--> when it completed the installation, click "Finish"...
   
  Restart, and then log on as an administrative user.
   
  Visit this web page:
   
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
   
  ... and click on the "Microsoft Fix it."  When asked, select "RUN."
  both times.  Check the box "I agree" and click "next".  Select the check box
  to "Run the aggressive options (not recommended)" and click "next".  Let
  He finish and follow the instructions until it does.  Close/exit.
   
  Restart, and then log on as an administrative user.
   
  Visit http://windowsupdate.microsoft.com/ and select this option to make a
  CUSTOM scan...
   
  Whenever you are about to click on something in these pages - web
  first of all, press on and hold down the CTRL key while you click on it.  You can
  release the CTRL key after clicking on each time.
   
  Once the scan is complete, select just _ONE_ of high priority updates
  (deselect all others) and install it.
   
  Restart, and then log on as an administrative user.
   
  If it worked - try the web page - selection not more than 3-5 a
  time.  Reboot as needed.
   
  The optional software updates are generally safe - although I recommend
  against the 'Windows Search' one and all of the "Office Live" those or
  "Windows Live" which for the moment.  I would like to avoid completely the
  Optional hardware updates.  Also - I don't see an urgent need to install
  Internet Explorer 8 at this time.
   
  Come back - especially if you're stuck somewhere, but even if you don't-
  and let everyone know how it turns out.
   
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• Windows 8 will not start, automatic repair does not solve anything.

  If the installation of Windows 8 FINALLY worked, thanks to technical support. However, he would not read my CD driver NVidia GPU, so I rebooted the PC. Now it does not start even upward. He tries and fails twice before saying that auto repair failed. And I still can't get.

  Come on Microsoft. Why you release this if she has so many compatibility problems?

  so, it comes to my account, but somehow I can't log in. I solved in refreshing.

• After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

  After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

  Update does not seem to have problems - failure, lack of time for flash, backup, etc.

  boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

  next steps?  is there a way to access the BIOS?

  Thank you

  There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

  I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

  OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

  I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!

• Will set you free 'main Windows 8' in April 2012?

  Will set you free 'main Windows 8' in April 2012?

  The release date of Windows 8 has not made public. However, given that it is still at stage overview of the pre-beta developer I guess he'll be significantly after April 2012.

  If you have any other questions about Windows 8, please ask them in the MSDN forums. The specific forum you need is:

  http://social.msdn.microsoft.com/Forums/en-US/windowsdeveloperpreviewgeneral/threads .

  You can also find this interesting:

  http://blogs.msdn.com/b/b8/ .

• iTunes will not open even after reinstall on windows 7

  iTunes will not open even after reinstall on windows 7

  Hello mamaKAT,.

  Read the Apple article listed here:
  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
  http://support.Apple.com/kb/TS1717

  If this does not help, you should contact Apple support or post in the Apple discussion forums.
  http://discussions.Apple.com/category.jspa?categoryID=149

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I will be able to reinstall my windows if necessary after the end of support for Windows 7?

  Original title: windows supports

  Last year, I bought Windows7 Home Premium and it works well so far. My question is after January 2020 (after the end of support) I will be able to reinstall my windows if neede? Also if there is no microsoft activation problem help me right here? Also even if the support of the application ends with its suppliers I will be able to download mse, it's to say & essentials of windows from the microsoft Web site myself since the automatic update is not available? or I'll be forced to buy Windows 8, 9, 10 or 11 at this time? Sorry people I know that this issue is too early and not be worried right now but I love windows 7 and I want to run for life so is this possible? Thanks in advance.

  1. Yes, you will be able to reinstall Win7 using the disks provided with your computer, the rescue disks, you have created and/or the hidden restore partition.

  2. where support for Win7 purposes, take in charge ends (for example, activation problems).

  3. There will come a time where the current version of Windows (Live) Essentials is not supported in Win7 - even if your currently installed version of Windows Essentials may continue to be supported for some time.

  4. by the time for purposes of Win7 support, chances are THAT MSE is no longer supported.

  5. No, you don't will be not "forced to buy" a new version of Windows (assuming that Microsoft is still for sale).

• Does anyone know if reinstalling Windows 8 will correct the unhandled exception (eanomn.sys) kmode error

  Original title: KMODE

  Does anyone know if reinstalling Windows 8 will correct the unhandled exception (eanomn.sys) kmode error?

  This accident was connected to your ESET.  I delete the version current (2013) and install the latest available version.