A symbol embedded in infinite loop

Similar Questions

• Infinite loop - Restrictions PIN forgotten, can't stop to find my iPhone for restoration

  I have an iPhone 6 for my children. I forgot the PIN code for restrictions affecting. When you make selections for the restrictions, I put it that nobody could change anything without my PIN entry for restrictions. So, it would mean that 'Find my iPhone' cannot be disabled without knowledge of the PIN for restrictions.

  The easy solution is to restore the phone. However, in order to restore the phone, I received instruction to turn off "find my iPhone". So, I'm stuck in an infinite loop. I've seen several recovery programs, but some lead to links that were not there, others have asked me to pay for the program, and others seemed questionable.

  Any suggestions would be welcome. Thank you.

  You have to force into recovery mode to restore.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• When you open a file fdf Firefox goes into an infinite loop of opening new tabs. The only solution is to reboot the machine.

  When you open an fdf file, firefox goes into an infinite loop of creating a new tab, reading a local file (I think that a copy of the fdf file), opening a new tab, read the same file, etc.. The only solution is to reset the machine.

  For now, I guess that the solution is to open the FDF externally (i.e. in Reader or Acrobat and not the plugin).

  You can search for known bugs about Marlon or submit a new report in Bugzilla.

• Satellite A300-247 - restarts as an infinite loop

  Hello

  Please be advised that am not able to start my laptop as before that it reaches to load windows it restarts and in this case as an infinite loop.

  I formatted my computer, laptop and even tried to use system restore, but nothing works.

  So kindly help me

  model - satellite A300 - 247
  OS-windows 7 64 bit

  Hello

  You are able to access the Menu of system repair?
  While applying power to the unit and the system starts, press the F8 key.
  Now you should get an Advanced Menu, including an additional option to start the laptop.
  I recommend you check the first option called repair your computer

  Now you should get another window with a few options. Click on the first option called Startup Repair and check if it could help you to fix the system.

  In the case where this wouldn't you help, you should check if new OS install would resolve the startup problem. But if the new operating system installation is not possible, you should start to check the hardware parts.
  In the first case, it should be the HARD drive and the laptop must be verified with another new, tested good HDD.

• Ati32dvag.dll BSOD and driver is stuck in an infinite loop on Tecra

  Hey

  Can someone help me with this strange problem. I have an ATI X 600 128 MB graphics card and he is stuck with sometimes a blue screen and a following stop code: STOP: 0X000000EA (0X85B1ECB8, 0XEBF93CB4, 0X85696B38, 0x00000001) and he said that the ati32dvag.dll of the driver is stuck in an infinite loop.

  I ve tried to reinstall - just uninstalled and reinstall again, and it s always the same. Hope someone is able to help him because I ve starting to hate my computer.

  Stefan

  You said it seems sometimes. Eventually, when you play some heavy games and the laptop gets hot?

  As feliks says that you must use the graphics driver Toshiba because I heard that this driver has been slightly changed and supports a graphic protection against overheating

• Satellite C660 stuck in an infinite loop of BSOD after upgrade to win 10

  Wow what a disaster, this is a machine under windows 7-32 bit Satellite C660 PSC1GA-01E01M stuck in an infinite loop of BSOD.

  The lappy said that it was ok to upgrade to windows 10 so... Yes, I did.
  Now its stuck in a loop without end of BSOD.

  So I decided to use the recover option and reinstall windows 7 and then move from there.
  After mega downloads updates and finally got to the stage where there was no update on the left to get, so I decided to upgrade to windows 10 even once.

  Now stuck in an endless loop of BSOD again.

  Can someone point me to the driver who is a failure, I can get into SafeMode ok, Device Manager has 2 problems

  (1) is under OTHER DEVICES is an unknown device
  (2) is generic pnp monitor

  I tried from Toshiba Web site for updates of drivers for 32-bit windows 8 thinking this could be the best step but the links are bad and the page Web said sorry loser at home...

  Also no network, if I try to logging for the safe mode with networking, he returned to the screens of BSOD...

  HELP PLEASE

  Toshiba has released a list with all Toshiba models supported for upgrading to Windows 10
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Satellite C660 PSC1GA is not in the list, which means that this model is not supported to win 10 and will not get win 10 drivers.

  However the Win 10 must run on this device, because it meets the essential physical requirements.

  I guess the BSOD loop arise due to some drivers which are not entirely compatible Win 10 and probably these drivers must be removed before making the Win 10 update.

  To check the compatibility follow this procedure:

  • Right-click on the icon 'Get Windows 10' (on the right side of the taskbar), then click on "Check the status of your upgrade".
  • In the app to get Windows 10, click on the menu: (3 lines) and then click on "Check your PC.
  • Now you should see the list of compatibility issues

  Also this kind of problem could be fixed by Microsoft update, as mentioned in this article:
  http://www.Forbes.com/sites/amitchow...s-reboot-loop/

• Infinite loop of BSOD problem - Satellite M55

  Many people receive the "infinite loop" error with M55 / ATI 200 M.
  Is there any solution for this? My laptop (bought in May 2006) is worthless... restarts every 2 minutes. Totally unusable.

  There was a post here where the user has indicated they have found a solution, but the solution was not displayed :(
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15169

  Please reopen this thread, or post the solution.

  If there is a new driver that I'm supposed to use, thanks for posting the link (as opposed to simply say "use a new driver").

  Thank you.

  Hello

  First of all... the infinite loop error is not specific to any video card.
  When you get this error? The BSOD appears during the game?
  Using the graphics driver from Toshiba?

  I t can give you a good solution, but if you use all the drivers of the operating system recommended should I run stable without any problem, the BSOD or interruptions.
  The unit is very old, and the warranty is valid. The notebook should restart every two minutes on something like this is not usual.
  So if the drivers of Toshiba won't help you I would suggest contacting the service point in your country.

  Everything has to be checked

• Satellite P100-194: blue screen - nv4_disp is in an infinite loop

  I have a Satellite P100-194 since 28.08.06 and I get this blue screen telling me that the nv4_disp (I think it's the graphic driver nvidia) is in an infinite loop.

  Error message:
  ---------------------------------------------------------------------------------------

  (English translation):

  "Device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the incorrect programming hardware device driver.

  Please check with your hardware vendor, updates to the driver.

  Technical information:

  "STOP: 0x000000EA (0x857F66E0, 0x85CL22D0, 0xF7C61CB4, 0x00000001)".
  

  ---------------------------------------------------------------------------------------

  Then he said something about the execution of a physical memory dump and I had to reboot.
  Sometimes the monitor turns off just (without blue screen) and I have to stop again. Or the screen shows several vertical strips during startup. in the case of windows window should come it gets black. I had this error 5 - 6 times since I bought it.
  This could be a damage on the geforce 7900 gs card or RAM may be defective or do I have new chipset... drivers?

  The drivers are the latest (from toshiba).

  Technical support told me to format the pc.
  The laptop is new and was very expensive, so I find it very strange that I need to update anything to make it work properly... ? ! ?
  Yesterday I formatted the laptop and reinstalled with the Recovery CD... because the error is sometimes, I don't know if it's working now, but I would be grateful for any HELP or comment on that.

  Thank you.

  Monika

  Post edited by: [email protected]_DE

  Post edited by: [email protected]_DE

  Hello Monika

  Please try this http://support.microsoft.com/kb/293078/en-us

  It's very strange because I know Satellite P100 is very good laptop of sole and this question cannot be sorted as any kind of common problem. If nothing helps, please contact your local dealer. They will help you.

• Satellite P100: BSOD nv4_disp infinite loop playing a game

  Hello

  I hope you can see my details of my profiling system, but in case you can't, here are the basic details:

  Satellite P100-113; 2x2.0GHz; 2 GB of memory; XP Pro SP3. Go 7600 256 MB - factory core/mem speed 350 / 400 MHz - no overclocking.
  Out of warranty: purchased as a plant-reclamation in 2006. No problem at all until this - great machine!

  I tried for 2 weeks to resolve the formidable 'in nv4_disp infinite loop' blue screen of the problem of death, which occurs when playing company of Heroes Opposing Fronts (COHOF). Original COH has always run without any problem.

  I think I tracked down what is happening. Using RivaTuner, I took a log of data GPU, both in the general use of Windows and by practicing a COHOF game. I had just downloaded a "fix" claimed this infinite loop problem; referenced in the nvidia forum.
  I think it was the only reason that the game did not plant this time, so that I could look at the newspaper. But this has not yet resolved the problem.

  What is clear, according to the journal of Riva, it's the GPU speeds are usually 0/0 on Windows. Then, every few minutes, he crawls up to something like 198/135, for only 10-20 seconds and then again. This, in my opinion, has always happened, because it is accompanied by a rapid acceleration of the fan and a "sigh" to air for a few seconds. The machine has always done since I bought it, and it is not a problem in normal conditions (i.e. not game) use.

  But here'w what happened in the game. After playing about 30 minutes (I noted earlier), the game suddenly stuttered horribly, so I thought it might be breaking. FPS increased from typical of 30-40 something like 0.5 to 2 FPS. And this continued for another 15 minutes (I went to play, with gritted teeth, in order to obtain good log data).

  Looking at the newspaper of Riva, what happened at that time was one of these speed GPU rampdowns: down 351/398 expected 198/198 - just for about 15 seconds, then go back to the top to 351/398. Given that the "infinite loop" error includes a description "device driver entered an infinite loop waiting for the material to answer", I am fairly certain that it is the cause of the infinite loop BSOD: If the GPU suddenly decides to run at reduced speed in half, under heavy load (COHOF has often been described as the ultimate stress-test system) , you expect this kind of error occurs. I suspect that this is the point to which I would have had a crash "infinite loop" - but perhaps the 'fix', I downloaded caught the ball and prevented the usual total crash.

  Temperature: absolutely perfect. I use a Zalman cooler under the machine. Riva reports temperatures GPU 51 c (idle), maxing out at a constant C 66-68 without crampons (load, COHOF). So, my driver unless (I tried 84.4 - later, Toshiba or 91.33, 156.13, 164 something laptopvideo2go.com) is a misinterpretation of the temperature data and imagine that the card needs to be rested (because the driver thinks, it's hitting the ceiling of 115 HP.), is not an overheating problem.

  The fact that go up and down this rise has always happen, even with the original drivers installed at the factory from Toshiba (the regular intermittent fan 'sighs') makes me think that this is part of Toshiba design for integration of the Go 7600 in this machine. Perhaps something of the power management, or to extend the life of the chip. (I have all the settings of power-mgmt software I can find the value "grass of the battery, give me performance", since I usually use the machine plugged).

  Now, it of very well under Windows, does not cause problems. But he won't. The GPU is ramping down, without apparent reason, while COHOF is throwing a huge workload on it.

  Issues related to the:
  1. How can I disable this behavior ramp - at least temporarily to play COHOF? I've never heard of a GPU accelerates its speed goes up and down depending on the load, so I doubt it's problem of nVidia.
  2. can I get an updated driver for this machine? The most recent is 84.4.0. Of course, it is possible to download drivers from laptopvideo2go.com modded-, but I suspect that these pilots to leave out some specific Toshiba 'magical' that manages the specific details of this card in this machine. (p. ex. or SpeedFan and Riva can detect any fans in my system, which suggests that Toshiba took control of the fan "under the hood" somehow).
  3. where can I get an update BIOS/firmware for the Go 7600? You can find anything on the net, apart from that!

  Looks like I need to take this with a hardcore of Toshiba tech (I don't know if Toshiba supports log on this forum); But if someone reads this and has a time "click - I know that this", please post some ideas as to what I can do.

  Hey Buddy

  It seems that this Toshiba forum is only a user forum, and it seems there are only Toshiba users here and not technicians.

  In any case if I understand you problem described in your long ad, the graphic issue appears only this specific game (company of Heroes Opposing Fronts).

  In my opinion, the graphics driver is not fully compatible with this game or your game does not support the nVidia Driver
  So it s not a problem with the laptops hardware, but compatibility issues between the two parties game<->graphics driver software

  I think a graphics driver update (if available) might help.

  Here are my responses regarding the points:

  (1) as I said above, I think that the graphics driver update might help to
  (2) according to my experience, all the latest drivers graphics (and other drivers) are published on the Toshiba driver website
  (3) you can find only a Toshiba BIOS on the Toshiba driver page. BIOS or firmware update graphic card is unknown to me and to be honest I don t think it would exist.

  See you soon

• Unable to connect to iTunes - infinite loop of death!

  When it asks to connect to iTunes on the iMac, I'm stuck in an infinite loop of death... Force Quit is my only after several hours.

  No recent changes to Apple ID or password and can always connect successfully on other devices such as the old iPod Touch dinosaurs.

  Don't know if it was related (although common sense suggests that perhaps it is), but recently updated iMac OS X El Capitan.

  Any help is greatly appreciated with thanks...

  You are able to go to the iCloud and log in system preferences pane with your Apple ID here?  If you open Mac App Store and iBooks, you are able to log in with your Apple ID in these applications?

• infinite loop when connecting to time warner cable

  I get an infinite loop when you try to connect, it keeps going to connect and flashing then go back to the login page.  This site allows me to watch TV via my internet connection that works normally, including HBO, pay-per-view movies, guide, etc.  Currently only Firefox works, but I prefer to use Safari who has this problem.

  I suggest you only begin by taking the measures recommended in this support article.

• How to stop an infinite loop due to a guest user placed during development without close LabView?

  How to stop an infinite loop due to a guest user placed during development without close LabView?

  Thank you!

  Hi chuck72352,

  Press on "Ctrl +." and keep pressing OK on the MsgBox. There will be a point when the program terminates.

  Mike

• W500: ati2dvag infinite loop

  I saw the blue screen many times after obtained my w500

  He said ati2dvag blabla and blabla infinite loop

  can someone tell me how to fix it?

  Moderator Note: Type added to the line object for clarity.

  
  

• Microsoft Silverlight is stuck in an infinite loop

  This morning I got an error message telling me that I needed to uninstall and reinstall Silverlight of Netflix. I deleted all the files on my computer and went to reinstall. After reinstallation, I was told that I could not reinstall because a new version of Silverlight is already installed. I'm stuck in an infinite loop of H E L L. Microsoft seems to only provide help for Windows users. I'm running on a Macbook OS 10.6.8 with 4 GB of memory. So, it is not a question of space or an OS problem. I don't know what is happening! Please advise!

  Hi Ari,

  I suggest you post your question in the Microsoft Silverlight forum and check if it helps.

  http://forums.Silverlight.NET/

• Has managed to recover from the infinite loop restart Vista SP1 "configuration updates stage 3 of 3 0%"- but Windows Update always wants me to install Vista SP1!

  WIndows Update asks me to install Vista SP1. I did and got into the infamous infinite loop of SP1 (infinite loop ' configuration updates stage 3 of 3 0% "with Vista SP1). I used F8 to repair my computer, and I chose a restore before the SP1 update point has been installed. The restore point has been applied successfully, so I have the computer in the back. Super. However, Windows Update wants me reinstall Vista SP1. Needless to say, I am reluctant to do so. But I want to be aware of the Windows updates. What do I do? TIA

  (With the help of Vista Home Premium)

  This gives a whirlwind:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. right click on the file that you saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. ensure that the http://support.microsoft.com/kb/955430 and http://support.microsoft.com/kb/947821 have been installed. (If they were, they would belong to installed updates. If they don't, try to manually download/install.

  6 test cycle.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft