A900-IMA8S1Z - Combo Limitations

Similar Questions

• Satellite L500 - light of Wi - Fi with another Combo PCIe Mini card

  Dear Toshiba

  I have 2 of L500-1UG notebook, with the mini PCIe RTL8187B card. (one 32-bit and 64-bit Win7 Home Premium)

  This card has no BT and is only 54Mbps and because the laptop is out of warranty, I bought RALink Tech 2 - card Combo RA3090BC4.

  Only open a notebook up to now, but I've tried the two RA3090BC4 in it.

  When I turn on with the Realtek card, orange wifi light long transfer Windows 7 starts

  When I turn on with the Ralink card, the orange wifi lights at all.

  Win7 32-bit Home Premium (downgraded for reasons of test development software) detects and installs the drivers successfully. I installed the driver for Ralinktech.

  Bluetooth installs fine and I transferred a 12 MB file, a mobile phone successfully.

  I swapped the son of black and white antenna (it is marked 1 and 2, not the hand and to the).

  What else can I check?

  Is there a compatibility issue?

  > Is there a compatibility issue?
  Probably yes. I guess you know that laptops have limited opportunities to upgrade and these upgrades are not supported at all. In the case that you are not happy with built in the solution of the WLAN card is the use of external devices such as USB WLAN cards.

  All pre-installed software are also designed to work with original equipment components. It is not easy to help in this case.
  I m also wondering how you can just buy a WLAN card and Exchange. I mean before doing this, it is important to check if these updates is possible or not.

  Let's see if someone else has a good suggestion that you can do to make it work.

• A60-106: is it possible to upgrade the DVD/CD-RW combo

  Hello. Anyone know if it is possible to upgrade the DVD/CD-RW combo on my A60-106? There is nothing wrong with the origonal, but DVD write speeds also have multiplied since I my A60. I burn a lot of discs, and any increase in speed would be a major asset. If the upgrade is possible, am I limited to real Tosh or is there any of the third-party available-based jobbies. My current drive is a Pioneer DVR-K13A.

  Thanks in advance.

  Brian

  Hi Brian,.

  You can certainly replace your optical drive with a new. You will need to ensure that the new disk is the same size as the original (i.e. its physical dimensions), and uses the same connectivity as your original (master, slave, or Cable Select). This last point can be problematic, because very few third-party resellers list actually what setting of their readers.

  As for the actual burn speed, you can see that other factors will affect this. you will find many posts in these forums related to the low burning rate.

  Good luck

• limitation of number 1 to 158 channel - Windows Media Center

  When I try to add a channel with a number in the 400s to my list of TV channels, I get a message error "Invalid Channel number - enter a channel between 1 and 158 number."  What is a limitation of Windows Media Center or my HDTV card (which is a Combo NTSC/ATSC Hauppauge WinTV HVR-1600)?

  If a limitation of Windows Media Center, is there a version that accesses higher number channels?  I could not find a version number for Windows Media Center when I checked the properties.  I am running Vista Home Premium 32 - bit with Service Pack 2.

  Thanks for any help you can provide.

  Hello

  Did you change your computer?

  I also suggest you follow the links below

  Troubleshoot Guide downloading problems in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-guide-downloading-problems-in-Windows-Media-Center

  TV signals that are supported by Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/TV-signals-that-are-supported-by-Windows-Media-Center

  Use the Guide in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-the-guide-in-Windows-Media-Center

  Set up a TV signal in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-TV-signal-in-Windows-Media-Center

• Script to change the selection of combo based on numerical values box is entered in a text box

  I implemented a form of feedback to student and I'm looking for how to refine the process for the user. Please see the image below. As you can see that the form has individual learning, each of which has three statements of "feedback". These are currently the combo boxes with predefined statements selected by the user in the menu dropdown. These statements are connected digitally to our marking scheme that is if the feedback statement uses the word "limited", it matches with a score of 20-39 on our scale of correction. If she uses the word 'excellent', he corresponded with a score of 70-100.

  Limited 20 - 39

  40 - 49 adequate

  good 50-59

  very good 60-69

  excellent 70-100

  Currently, the user enters the brand in the small text box size in the right corner of the relevant learning outcomes. The user must then manually select the corresponding instructions of feedback from the drop-down list box. Which is quite tedious. Here's the thing:

  Most of the time statements all match the digital brand, i.e. If the student received a score of 55, then feedback statements would usually all be in the 'good' category: '.. '. good quality research... «, ».. good analysis... «, ».. good research management... ". It would be a great time saver if the statements could be scripted to react to the numbers in the text box. For example, when the user types in a notes 50-59 feedback instructions themselves define automatically to all be '... good... ". There's still a thing.

  It is important that the user has the possibility to change the declarations of individual feedback if necessary. that is a mark of 58 may require two statements of feedback in the "good" and the other in the 'very good' category: '.. '. good quality research... «, ».. good analysis...', '... VERY good orientation of the research... ". The user must therefore always the option to bypass the automatic selection if necessary.

  It's beyond my Basic scripting capabilities, but I wonder if anyone can break this problem? Your help would be much appreciated.

  

  Thank you

  Charlie

  Hello

  I create a simple sample here - https://acrobat.com/#d=FFhf7MQtKrH5iickDJBBxw

  I used the blur of the text field event so that the code is triggered when you tab to or click elsewhere in the form, the code can easily be moved.

  I named the fields

  Text1

  Dropdown1

  Dropdown2

  Dropdown3

  and these will have to be renamed according to the names of your fields.

  Hope this helps

  Malcolm

• Function of more limited rotation on imac than the iphone!

  I just realized that the edit > function of rotation is more limited on Photos/imac compared on my iphone.

  It is surely not good! On my 27 inch screen it only allows me to rotate 90 degrees, but on the iphone I can adjust to any angle that I wish, and it also gives a grid to help align things.

  Maybe it's a setting I'm missing - otherwise I find it's a huge gap for not being able to properly rotate the photos on my imac.

  In Photos on my Mac 2.0,.

  -I select the picture

  -Click the button to reveal the editing tools (top right photo window, to the left of the Details button)

  -then right click on the first symbol third with two arrows dotted ("crop" in French...)

  -then click, hold down and up and down

• I have FaceTime disabled through restrictions on my daughter's phone.  However, she is still able to make and receive calls FaceTime. If it is limited, how this phenomenon is happening and is there a way to prevent it from happening in the future?

  I have FaceTime disabled through restrictions on my daughter's phone.  However, she is still able to make and receive calls FaceTime. If it is limited, how this phenomenon is happening and is there a way to prevent it from happening in the future?

  How do you know that she can always use Facetime?

  Could she learned/guessed the password restriction?

• iCloud Sync Limitations

  I have two questions (so far)

  1. I have sync had the records office and Documents on my MacBook Pro, but I can't go on my iMac, because (to quote the error message) "you have too many files, too many files in a single folder, or too many folders nested in your Documents or files from office."

  I have a lot of capacity iCloud passing, after having updated in advance.

  Does anyone know what the limits are or where to find them?

  2. what happens if you have the same name of folders on two Macs and try to synchronize the other?  for example if you have the same software installed on both machines you might have a folder of Documents/Adobe on each example.  If a folder is renamed automatically, I fear that it could affect the application next time it is run.

  For your first question, I do not know what are the limits, but what happens if you were to move some items from these folders and subfolders?  Which would be then able to synchronize your documents easily?

• VPN connection error - pppd limited

  Hi I think I have a problem with OX, the captain and the networks, I sail perfectly with the team but since update stops running the VPN, I tried the possibility to go to recovery mode to 'disable csrutil' then ' sudo chmod u + s / usr / sbin / pppd "but it does not work when you use Netextender or FortiClient." I have another Mac with Lion and works properly the only difference I notice in the file 'pppd' Captain makes me 'limited, compressed' and only 'compressed' Lion I put a photo and a newspaper of netextender:

  15/09/2016 10:15:59.271 [603 General info] NetExtender 8.1.788 for Mac OS X initialized

  15/09/2016 path of the bundle app NetExtender 10:15:59.299 [General info 603] = /Applications/NetExtender.app

  15/09/2016 createLogPanel() 10:16:01.045 [gui info 603]

  15/09/2016 10:16:01.730 [config info 603] loading saved profiles...

  15/09/2016 10:16:16.507 [connect info 603] user: "prueba".

  15/09/2016 10:16:16.507 [connect info 603] domain: "abcd.hos."

  15/09/2016 10:16:16.509 [connect info 603] Server: 'vpn.abcd.es:444 '.

  15/09/2016 10:16:16.581 [603 general notice] connection to vpn.abcd.es:444...

  15/09/2016 10:16:16.820 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.821 [General notice 603] retry...

  15/09/2016 10:16:16.822 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.823 [General error 603] authentication failed: connection failed. See the log for more details.

  15/09/2016 10:16:16.823 [General error 603] NetExtender connection failed.

  15/09/2016 10:16:16.823 [General notice 603] SSL VPN disconnect...

  15/09/2016 10:16:17.058 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.058 [General notice 603] retry...

  15/09/2016 10:16:17.060 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.061 [General error 603] disconnect command failed

  15/09/2016 10:16:17.063 [General notice 603] SSL VPN connection is completed.

  15/09/2016 10:16:17.063 [config info 603] loading saved profiles...

  15/09/2016 10:16:17.065 [gui info 603] connection failed. See the log for more details.

  

  I think that the problem is a network file or because I put the wrong password and I cannot detect this error. as I said the VPN working properly with another MAC using the same network.

  Help...

  You shouldn't be messing with the security features of the operating system.

  Problems may have to do with the network, or client software that you use.

  I start by making sure all the software are updated and then create a new entry, vpn, double control system that everything has been entered correctly.

  FWIW, I use the built-in features of VPN on El Capitan to connect to my University regularly and without problem.

  I'm not familiar with "Fortinet", and I suspect that you may need to be updated, or simply use the built-in VPN.

• Y at - it a combo for 2016-001 updated security patch

  I try to install the security patch 2016 El Capitan-01 on the app store, but when the update try to restart, the restart just stops with the Finder running (I can Alt - TAB), but no other possibility of progress on reboot. I also downloaded the PACKAGE for the upgrade, but it has had the same impact.

  In the past, I worked around this problem by using a combination of upgrade (combo). He doesn't have one for this security patch.

  No guidance on problem (without own restart) or the other (combo) welcome.

  The only combo I know is:

  Download update of OS X El Capitan 10.11.6 Combo

  However, the Post Date: July 18, 2016

• There should be a limitation or personal parental control on hotspot. Children feel obliged to allow their friends to use their hotspot. And the parents who pay for it!

  There should be a limitation or personal parental control on hotspot. Children feel obliged to allow their friends to use their hotspot. And the parents who pay for it!

  This is a user to user support forum, so there is really nothing anyone here can do for you, I'm afraid.

  However, you can send your comments Apple

  http://www.Apple.com/feedback/

• How to overcome the limits of mail?

  I want to send a mass email to more than 100 people. How can I exceed the limits of sending mail?

  You can use a Gmail account with the e-mail. Their limit is 500 recipients for a single e-mail.

• How can I disable limited Mode for watching Youtube videos?

  How can I disable limited Mode for watching Youtube videos?

  You need the restriction code to disable restrictions.

  UPDATED - revised to include the correct article for Mac.

  OS X El Capitan: set up parental controls

• 10.11.6 combo update requires 10.11?

  I downloaded the update to 1.5 GB El Capitan 10.11.6 of Apple Combo to install on my external hard drive, but when I try to install I get a message that says that it requires 10.11 (see screenshot)

  What happens here?

  

  What OS is running on the outside?

  The Combo Update 10.11.6 isn't a full installer. It takes 10.11.0 10.11.5 currently installed on this drive.

• Zoom is limited, even with Zoom.maxPercent to 99999

  I can zoom in only a few times (8 times the default value). I used to be able to zoom in more, then Zoom.maxPercent has been introduced and limited, but through the: config I could change that. Zoom.maxPercent changing has no effect more either.

  I don't know what is happening. I can zoom in now, but do not know how I got there. I suspect that restarting a profile was not enough to reset Firefox. I had to close all. (I wanted to be able to zoom in a new profile, but why I couldn't enlarge my old profile for awhile? Don't know.) Anyway, of course I don't have a zoom of 50 value. The first time I've changed these values I didn't know what I needed. As to why, I use it to design layouts in fr 'em zoom to see the effects sensitive (b) want to blow up Chinese characters and Japanese easily for inspection or copy (c) it allows to make quickly the images that use glyphs (the interface to paste the glyphs into Gimp is heavy). -Thank you for your time.