VPN connection error - pppd limited

Similar Questions

• After moving to Windows server 2012 VPN connection error

  Hello world!

  Recently, I upgraded my Windows Server 2003 SB server to a new server running Windows Server 2012.

  I started from scratch by creating a new domain, user, accounts etc.

  The new server is using the same IP address as the old server.

  Since then, I can't connect through the VPN. I have already added the role of remote access on the new server.

  When I try to connect to my Windows 7 laptop, I get this error:

  "Error 800: the remote connection does not because attempts VPN tunnels failed." The VPN server is maybe inaccessible. "If this connection tries to use an L2TP/IPsec tunnel, the security settings required for IPsec negotiation is may not configured properly."

  Any help with this is appreciated.

  Hello

  The question you posted would be better suited in the TechNet Forums. We have a separate team working on the server problem, so I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

  Hope this information is useful.

• Ikev1 ASA 5505 VPN connection error

  Hello

  I had previously defined our VPN using IPsec on our ASA 5505 via the ASDM.   It was workign fine until an outtage power loses my settings on the device.  (possibly a recording of order is not pressed)

  Now when I try and put in place, once again I am recieveing an error to port binding.  I have configured as normal using the wizard and activate split defintion and exempt the network inside.

  The isssue when you apply the settings that I get is:

  "[ERROR] crypto ikev 1 activate outdoors.

  IkevReceiverInit, cannot bind the port. "

  When I try to connect to the VPN I then get an error "the server cannot be reached" or something similar to that...

  Could someone please shed some light on what can cause this problem?

  Best regards, the Paris

  William.

  Hello

  Thanks for the information!

  We will need to know why this host using UDP 4500 and if this host really needs to use this port.

  What type of application is running on this host?

  What is a host internal or external?

  You may also block the host on the SAA on the incoming interface to avoid the use of the UDP 4500 port using a group of access (outside or inside). Don't forget that you will need a ip to allow a at the end of the ACL to avoid any problems. Another option would be to use IKEv1/IPsec over TCP

  IKEv1/IPsec over TCP allows a Cisco VPN client operate in an environment in which IKEv1 or standard ESP may not work or may work only with the change of the existing firewall rules. IPsec over TCP encapsulates IPsec protocols both IKEv1 in a TCP packet as and allows a tunnel secure two firewalls and NAT and PAT devices. This feature is disabled by default.

  The default port is 10000.

  HostName (config) # ikev1 crypto ipsec-over-tcp

  You also need to activate on the VPN client under the profile.

  Change > Transport > IPSec over TCP.

  I hope this helps.

  Luis.

• VPN connection: An unexpected error has occurred.

  I am suddenly unable to get my built-in VPN connection works on my iMac with OS X 10.11.5.  I get the VPN connection message: an unexpected error has occurred.  I have been using this VPN configuration to connect to work for several months with success.

  But last week (and I do not know if it had nothing to do with it), I went on vacation and used a free wi - fi setup of Tim Hortons.  I had a LOT of trouble getting the next login page, and I checked all playing with different settings of network without success.  When a change did not work, I put it to its original setting.  Finally, I learned to use Safari to access the free WiFi connection page of Tim.  Then once connected, everything was OK.

  But when I returned a week later and if necessary, to start my VPN connection to access the work, it wouldn't start.  I checked and recheck all my settings preferably of different network, but did not find those who were wrong.  I even deleted and re-entered my VPN service definition without solving the problem.

  Thinking that the problem could be the newly installed ISP of Bell equipment (we went from Rogers while I was away), I used my BlackBerry smartphone (issued by my employer) to create a wi - fi hotspot and accessed to the internet using this connection which completely ignored my home ISP equipment.  But still, I was unable to establish a VPN connection.

  I then tried my iPad VPN connection, and it worked!  Then, I defined a VPN service on the iMac to my wife and the iMac to my daughter and was able to successfully establish a VPN connection to my work very well, using exactly the same VPN configuration.  This led me to the conclusion, it was a problem on my iMac (and not with my new ISP or VPN system of my work that had none of the changes you made), but I still can't find what is "broken".  I run Onyx for my iMac OS X 10.11.5 and repaired permissions and clean the cache and all the rest she is doing to "solve" problems.  But the problem persisted.

  Is there a preference file corrupted somewhere (scan option is no longer on the current version of the Onyx for a reason any)?

  I still have a network setting wrong somewhere I need to go back to the system is correct value?

  Here is the attempt to VPN from the file system.log (with some hidden values in the case where they display my work VPN access):

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: received an order to start SystemUIServer [257]

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: changed to connecting status

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: phase 1 of the IPSec from.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: agreed to the takeover of vpn connection.

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: connection.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec Phase 1 started (initiated by me).

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: bind 1 (cannot assign requested address)

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: sendfromto failed

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: Phase 1 negotiation failed due to the error of sending. 94437eb7d5b1b6e8:0000000000000000

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: can not send packets

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IKE Packet: send failed. (Initiator, aggressive Mode 1 Message).

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: Controller IPSec: IKE FAILED. Phase 1, assert 0

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed by disconnecting

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec disconnection from the server 142.201.5.6

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec disconnection from the server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 3 times-

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed to offline, terminus right no

  Any help or insight would be more useful and appreciated... so that I can work from home again.

  Thank you

  Myron VanderLaan

  I finally found my VPN problem.

  There is a 'racoon' file that is generated when I connect to the VPN to my work site.

  I have created a modified version of this file so that my connection does not expire in 3600 seconds (changed in 24 hours).

  Apparently, there are some slightly different settings (such as certain IP addresses other than VPN IP of my work) in this file under our new ISP Bell from the former FAI Rogers.

  And if I connect to the WiFi Hotspot from my BlackBerry, it does not once again because these settings in the file are different again.  I must return the file generated instead of my modified file.

  Bad luck!

• error on the remote desktop and VPN connections

  Unable to connect using desktop remote or VPN. remotes can't find the computer at home on the network and the VPN gives me an 800 error code. I used the remote desktop, but it says my work computer isn't on this network and the VPN connection fails. We checked everything using remote assistance, but it becomes too hard and not responses. Help!!!!!!!!!!!!!!!!!!!

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
  Please post your question in the TechNet Windows XP category.
  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads
   
  I hope this helps.
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I click on VPN connection this "PPP link control protocol was stopped. (Error 734) ' appears, what should I do?

  When I click on VPN connection this "PPP link control protocol was stopped. (Error 734) "is displayed.

  The PPP link control protocol was terminated. (Error 734) For troubleshooting on measure for that information
  What should I do?

  Hello

  ·        Using a modem connection?

  ·        You did changes to the computer before the show?

  ·        Are you connected to any server?

  I suggest you to try the suggestion of linking and check if it helps:

  "Error 734: the PPP link control protocol was terminated" Error Message occurs if you try to establish a Dial-Up connection

  http://support.Microsoft.com/kb/318718

  Note: ignore the application of article.

• When I try to add a VPN connection, I get an error that the wizard is unable to connect. I am running Windows Vista.

  When I try to add a VPN connection, I get an error that the wizard is unable to connect.  I am running VISTA. I want to simply add a VPN and be able to connect to a non-profit organization where I volunteer.  My VPN working two weeks ago.  Then my shortcut did not work, and this problem started.

  Any help is appreciated.

  original title: VPN Vista issues

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Vista Networking forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

• Win7 VPN connects - returns the error code 806

  I use Win7 Ultimate, and try to establish a VPN connection to a job server.  I have a XP Pro system which connects OK but cannot get W7 to.  I have install the VPN as close to the installation of XP as I can but it works always... it refers to what a "check username and password" then there are there for about 3/4 minutes, returning an error message 806.  The modem/gateway has defined passthrough VPN and port 1723 in the firewall (don't forget XP connects OK) so I guess that the basis of the network is configured OK (?).

  I need help on what to do... I am new to W7 so am struggling a bit finding my way around.

  Thank you
  Huntsmann

  See this RRAS Team Blog entry for possible help... MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• Error 651 PPPoE VPN connection after the upgrade and reboot

  I have Win7 and a PPPoE VPN connection working perfectly well until tonight after the upgrade and reboot, the VPN just stopped working and gives an error code 651.  I have nothing newly installed.  What was wrong?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://TechNet.Microsoft.com/en-us/ms772425

• Wireless network connection disconnects when you plug in the charger and the error message "no connection available or limited connectivity.

  Original title: wireless computer does not work when plugged in and load, why?

  have a laptop Windows 7 who had originally installed XP. I have not changed anything inside her, but suddenly one day any time, I have the unit plugged my Ethernet and wireless turns off. As soon as I unplug it, the computer note immediately that there is a wireless card and connects.

  
  

  The computer has never done this until two weeks ago. It works just fine when unplugged, but still once, as soon as I plug it in it disconnects and States they has "No connection available" or "limited connectivity". I started seriously annoyed because it's my main laptop and I must wait for it to load in order to do something with him for an extended period of time.
  The device information:

  > Ze2000 HP (Pavilion series)
  > Original OS: Windows XP Home Edition
  > RAM: 512 MB
  > 100 GB hard drive
  > AMD Turion 64 Mobile Technology ML-34
  ___________________________________________________________________________________________________
  I can provide information. No errors appear in the error log or event viewer and I made backups and reset 3 times in recent weeks.

  Hello

  I appreciate your efforts to solve the problem.

  This problem may occur corrupt or incompatible drivers, missing updates or because of incorrect network connection settings.

  Are you having the same problem when you use the configuration of a network connection?

  I suggest you to check if there is no wireless or mobile network\devices which can interfere with the wireless network and remove if there is.

  Method 1:
  I suggest you to download and install the latest network driver on the manufacturer's Web site and check if it helps.

  Check out the link:
  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=442888&TaskID=135

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 3:
  If the problem persists, I suggest you to check that your device is allowed to the computer.

  a. click on start and type Device Manager in the box start the search .

  b. open the Device Manager and expand network adapter.

  c. right-click on the network driver and click Properties.

  d. click the power management tab.

  e. uncheck all options.

  f. click OKand then click OK again.

  See the article and check if that helps.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-Internet

  
  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

   

• Windows 7 not connecting to the VPN - gives error 930

  I'm one of my boxes, upgrade to Windows 7 (x 64) and everything seems to work - until I try to connect to my VPN - it gives me an Error 930.  On the same home network are a (x 64) Vista and XP (x 86) - both can make the VPN connection without problem to the same location.  When this box is Vista, it has good work as well.

  There is nothing fancy here - simple Windows work stations at a location behind a Linksys WRT54GS connection to a Windows Server 2003 server behind an ISA firewall.

  I deleted the connection and recreated, and it worked.  What is interesting is that the first connector name was identical to the location I tried to connect to (internal & external).  When I change the name of the connector, everything worked.

  To test, I deleted this connection and created another one as the first - named the same as the network tried to connect to and it wrong on.  When I renamed the connection, everything worked perfectly.  It seems that Windows 7 is lost when you name the connector, the same as the destination network FULL domain name.

• Unable to connect to remote vpn IPSec (Error 412)

  Hello

  Try to configure the IPSec vpn connection but error 412: the remote peer not responding.

  Router Cisco is directly connected to the internet using the dialer interface.

  So far, I tried the following:

  Disabled Windows Firewall

  IPSec over TCP ticket (received error 414)

  Permit to debug crypto ISAKMP and IPSEC (no illustrated newspaper)

  Newspapers enabled on the version of client VPN 5.0.01.0440

  (Impossible to establish Phase 1 SA with server 'xxxxxxxxx' due to the 'DEL_REASON_PEER_NOT_RESPONDING')

  The router configuration:

  version 12.4

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  encryption password service

  !

  !

  boot-start-marker

  boot-end-marker

  !

  !

  AAA new-model

  !

  !

  AAA authentication login default local

  AAA authentication login usr_auth local

  AAA authorization grp_auth LAN

  !

  AAA - the id of the joint session

  !

  resources policy

  !

  MMI-60 polling interval

  No mmi self-configuring

  No pvc mmi

  MMI snmp-timeout 180

  IP subnet zero

  no ip source route

  IP cef

  !

  !

  No dhcp use connected vrf ip

  DHCP excluded-address IP 192.168.3.1 192.168.3.10

  !

  pool IP dhcp pool Classes

  network 192.168.3.0 255.255.255.0

  default router 192.168.3.1

  Server DNS XXXXXX xxxxxxxxxxx

  !

  !

  no ip bootp Server

  no ip domain search

  IP domain name xxxxxxxxx

  property intellectual ssh time 80

  VPDN enable

  !

  !

  !

  !

  !

  username 7 password xxxxxx xxxxx

  !

  !

  !

  crypto ISAKMP policy 10

  BA aes

  preshared authentication

  Group 5

  !

  ISAKMP crypto client configuration group client_cfg

  XXXXXXX key

  DNS xxxxxxx

  pool vpn_pool

  ACL 120

  Max-users 2

  Profile of isakmp crypto vpn-ike-profile-1

  client_cfg group identity match

  client authentication list usr_auth

  ISAKMP authorization list grp_auth

  client configuration address respond

  virtual-model 2

  !

  !

  Crypto ipsec transform-set encrypt-method-1 esp - aes esp-sha-hmac

  !

  Crypto ipsec VPN-profile-1 profile

  the transform-set encrypt-method-1 value

  !

  !

  !

  !

  interface Loopback0

  the IP 10.0.0.1 255.255.255.0

  !

  ATM0 interface

  no ip address

  No atm ilmi-keepalive

  DSL-automatic operation mode

  !

  point-to-point interface ATM0.1

  no link-status of snmp trap

  PVC 8/35

  PPPoE-client dial-pool-number 1

  !

  !

  interface FastEthernet0

  no ip address

  automatic speed

  !

  interface FastEthernet1

  Shutdown

  !

  interface FastEthernet2

  switchport access vlan 2

  !

  interface FastEthernet3

  switchport access vlan 3

  !

  interface FastEthernet4

  switchport access vlan 4

  half duplex

  !

  tunnel type of interface virtual-Template2

  IP unnumbered Loopback0

  IP nat inside

  IP virtual-reassembly

  ipv4 ipsec tunnel mode

  Profile of tunnel ipsec VPN-profile-1 protection

  !

  interface Vlan1

  no ip address

  !

  interface Vlan2

  192.168.1.100 IP address 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  IP tcp adjust-mss 1452

  !

  interface Vlan3

  address 192.168.3.1 IP 255.255.255.0

  IP access-group 101 in

  IP nat inside

  IP virtual-reassembly

  IP tcp adjust-mss 1452

  !

  interface Vlan4

  192.168.4.1 IP address 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  IP tcp adjust-mss 1452

  !

  interface Dialer1

  the negotiated IP address

  IP mtu 1492

  NAT outside IP

  IP virtual-reassembly

  encapsulation ppp

  Dialer pool 1

  Dialer-Group 1

  PPP authentication pap callin

  PPP pap sent-name of user password xxxxxx xxxxxxx 7

  !

  local pool 10.0.0.10 IP vpn_pool 10.0.0.20

  IP classless

  IP route 0.0.0.0 0.0.0.0 Dialer1

  !

  no ip address of the http server

  no ip http secure server

  the IP nat inside source 1 list overload of the Dialer1 interface

  IP nat inside source static tcp 192.168.1.1 25 25 Dialer1 interface

  IP nat inside source static tcp 192.168.1.1 80 80 Dialer1 interface

  IP nat inside source static udp 192.168.1.1 53 53 Dialer1 interface

  IP nat inside source static tcp 192.168.1.1 53 53 Dialer1 interface

  IP nat inside source static tcp 192.168.1.1 interface 1000 Dialer1 1000

  IP nat inside source static tcp 192.168.1.1 interface 443 443 Dialer1

  IP nat inside source static tcp 192.168.1.1 interface Dialer1 143 143

  !

  WAN-IN extended IP access list

  refuse the ip 0.0.0.0 0.255.255.255 everything

  deny ip 10.0.0.0 0.255.255.255 everything

  deny ip 100.64.0.0 0.63.255.255 all

  deny ip 127.0.0.0 0.255.255.255 everything

  deny ip 169.254.0.0 0.0.255.255 everything

  deny ip 172.16.0.0 0.15.255.255 all

  deny ip 192.0.0.0 0.0.0.255 any

  deny ip 192.0.2.0 0.0.0.255 any

  deny ip 192.168.0.0 0.0.255.255 everything

  deny ip 198.18.0.0 0.1.255.255 all

  deny ip 198.51.100.0 0.0.0.255 any

  deny ip 203.0.113.0 0.0.0.255 any

  refuse the 224.0.0.0 ip 31.255.255.255 all

  allow an ip

  !

  access-list 1 permit 192.168.1.0 0.0.0.255

  access-list 1 permit 192.168.3.0 0.0.0.255

  access-list 1 permit 192.168.4.0 0.0.0.255

  access-list 101 deny ip 192.168.3.0 0.0.0.255 192.168.1.0 0.0.0.255

  access list 101 ip allow a whole

  access ip-list 120 allow a whole

  !

  control plan

  !

  !

  Line con 0

  exec-timeout 5 0

  line to 0

  exec-timeout 5 0

  password 7 xxxxxxxxxxxx

  line vty 0 4

  exec-timeout 5 0

  password 7 xxxxxxxxxxxx

  preferred transport ssh

  entry ssh transport

  line vty 5 15

  exec-timeout 5 0

  password 7 xxxxxxxxxxxx

  preferred transport ssh

  entry ssh transport

  !

  end

  I don't get any password prompt, so I guess there is a misconfiguration. Would appreciate if you can help with this.

  Thank you

  The 10.0.0.x pool is configured properly. Just change the NAT to traffic between 192.168.1.x, 3.x, and 4.x are exempt in NAT, where the above change config.

  Your split tunnel ACL says allow an entire ip, so please change it to the following:

  access-list 120 allow ip 192.168.1.0 0.0.0.255 10.0.0.0 0.0.0.255

  access-list 120 allow ip 192.168.3.0 0.0.0.255 10.0.0.0 0.0.0.255

  access-list 120 allow ip 192.168.4.0 0.0.0.255 10.0.0.0 0.0.0.255

• Limited on Wi - Fi network connectivity error.

  I always click the wifi on the lower right of my laptop and wait until the connection is back. If I use another laptop, the connection never gets limited. Help please. I tried all the steps on some discussions here, but none of them works. It's really frustrating

  Hi BeaFernando,

  To better understand the issue, I would need more information on your side.

  1. What is the brand and model of the computer?

  2. what measures all troubleshooting have you tried?

  3. did you of recent changes on the computer before this problem?

  Limited connectivity error means that the computer is connected to the router, but the PC has not been assigned a valid IP address.

  Try the steps listed here and see if it helps:

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: applies to Windows 8.

  
  Method 2:
  If the problem persists, I suggest you try to reset TCP/IP. Check if it helps.

  (a) boot to the view from the office.

  (b) open command prompt, right click in the left corner when the window appears and select (admin) command prompt.

  (c) at the command prompt, copy and paste (or type) the following command, and press ENTER:
  
  netsh int ip reset c:\resetlog.txt

  
  Note: if you do not specify a path of the directory for the log file, use the following command:

  netsh int ip reset resetlog.txt

  (d) restart the computer.

  See the article and check if that helps.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-Internet

  Note: applies to Windows 8.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• connection error, try using the citrix via a VPN LT2P connection connection - worked on last week

  I use a VPN connection to my work which then uses citrix to load the applications. I am able to dial in the VPN but citrix says to check the network connection - seems to want to use internet which is incorrect. It worked last week - has an update from microsoft has changed a setting?

  Hi CherylFreeman,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is linked to a virtual private network. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Forums Pro Windows XP IT.

  You can also contact the Support of Citrix.

• Error of customer Cisco VPN connection ASA 5505

  I am unable to connect to the vpn I created on my ASA 5505 using the Cisco VPN Client on a Windows machine. The log of the vpn client and the config of the ASA 5505 is lower. Any help to solve this is appreciated.

  CISCO VPN CLIENT LOG

  Cisco Systems VPN Client Version 5.0.06.0160

  Copyright (C) 1998-2009 Cisco Systems, Inc.. All rights reserved.

  Customer type: Windows, Windows NT

  Running: 6.1.7600

  Config files directory: C:\Program Cisco Systems Client\

  1 09:34:23.030 13/04/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  2 09:34:23.061 13/04/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  3 09:34:23.061 13/04/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "71.xx.xx.253".

  4 09:34:23.061 13/04/11 Sev = Info/6 IKE/0x6300003B

  Attempts to establish a connection with 71.xx.xx.253.

  5 09:34:23.061 13/04/11 Sev = Info/4 IKE / 0 x 63000001

  From IKE Phase 1 negotiation

  6 09:34:23.077 13/04/11 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) at 71.xx.xx.253

  7 09:34:23.170 13/04/11 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = 71.xx.xx.253

  8 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">

  9 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001

  Peer is a compatible peer Cisco-Unity

  10 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001

  Peer supports XAUTH

  11 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001

  Peer supports the DPD

  12 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001

  Peer supports NAT - T

  13 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001

  Peer supports fragmentation IKE payloads

  14 09:34:23.170 13/04/11 Sev = Info/6 IKE / 0 x 63000001

  IOS Vendor ID successful construction

  15 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000013

  SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) at 71.xx.xx.253

  16 09:34:23.170 13/04/11 Sev = Info/6 IKE / 0 x 63000055

  Sent a keepalive on the IPSec Security Association

  17 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000083

  IKE port in use - Local Port = 0xEB07, Remote Port = 0 x 1194

  18 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000072

  Automatic NAT detection status:

  Remote endpoint is NOT behind a NAT device

  This effect is behind a NAT device

  19 09:34:23.170 13/04/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  20 09:34:23.170 13/04/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  21 09:34:23.186 13/04/11 Sev = Info/5 IKE/0x6300005E

  Customer address a request from firewall to hub

  22 09:34:23.186 13/04/11 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to 71.xx.xx.253

  23 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = 71.xx.xx.253

  24 09:34:23.248 13/04/11 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

  25 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 172.26.6.1

  26 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.0.0

  27 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 172.26.0.250

  28 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 172.26.0.251

  29 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000000

  30 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000E

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = TLCUSA

  31 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000

  32 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000E

  MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc. ASA5505 Version 8.2 (1) built by manufacturers on Wednesday 5 May 09 22:45

  33 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001

  34 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = received and by using the NAT - T port number, value = 0 x 00001194

  35 09:34:23.248 13/04/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  36 09:34:23.264 13/04/11 Sev = Info/4 IKE / 0 x 63000056

  Received a request from key driver: local IP = 172.26.6.1, GW IP = 71.xx.xx.253, Remote IP = 0.0.0.0

  37 09:34:23.264 13/04/11 Sev = Info/4 IKE / 0 x 63000013

  SEND to > QM ISAKMP OAK * (HASH, SA, NO, ID, ID) to 71.xx.xx.253

  38 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = 71.xx.xx.253

  39 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">

  40 09:34:23.326 13/04/11 Sev = Info/5 IKE / 0 x 63000045

  Answering MACHINE-LIFE notify has value of 86400 seconds

  41 09:34:23.326 13/04/11 Sev = Info/5 IKE / 0 x 63000047

  This AA is already living from 0 seconds, setting the expiration to 86400 seconds right now

  42 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = 71.xx.xx.253

  43 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">

  44 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO *(HASH, DEL) to 71.xx.xx.253

  45 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000049

  IPsec security association negotiation made scrapped, MsgID = 89EE7032

  46 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000017

  Marking of IKE SA delete (I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8) reason = DEL_REASON_IKE_NEG_FAILED

  47 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = 71.xx.xx.253

  48 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000058

  Received an ISAKMP for a SA message no assets, I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8

  49 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(dropped)="" from="">

  50 09:34:26.696 13/04/11 Sev = Info/4 IKE/0x6300004B

  IKE negotiation to throw HIS (I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8) reason = DEL_REASON_IKE_NEG_FAILED

  51 09:34:26.696 13/04/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by "DEL_REASON_IKE_NEG_FAILED".  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  52 09:34:26.696 13/04/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  53 09:34:26.696 13/04/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  54 09:34:26.696 13/04/11 Sev = Info/4 IKE / 0 x 63000001

  Signal received IKE to complete the VPN connection

  ----------------------------------------------------------------------------------------

  ASA 5505 CONFIG

  : Saved

  :

  ASA Version 8.2 (1)

  !

  ciscoasa hostname

  domain masociete.com

  activate tdkuTUSh53d2MT6B encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 172.26.0.252 255.255.0.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address 71.xx.xx.253 255.255.255.240

  !

  interface Ethernet0/0

  switchport access vlan 2

  Speed 100

  full duplex

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  passive FTP mode

  clock timezone IS - 5

  clock to summer time EDT recurring

  DNS server-group DefaultDNS

  domain masociete.com

  access-list LIMU_Split_Tunnel_List note the network of the company behind the ASA

  Standard access list LIMU_Split_Tunnel_List allow 172.26.0.0 255.255.0.0

  outside_access_in list extended access permit icmp any one

  outside_access_in list extended access udp allowed any any eq 4500

  outside_access_in list extended access udp allowed any any eq isakmp

  outside_access_in list extended access permit tcp any host 71.xx.xxx.251 eq ftp

  outside_access_in list extended access permit tcp any host 71.xx.xxx.244 eq 3389

  inside_outbound_nat0_acl list of allowed ip extended access all 172.26.5.192 255.255.255.240

  inside_outbound_nat0_acl list of allowed ip extended access all 172.26.6.0 255.255.255.128

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  local pool VPN_POOL 172.26.6.1 - 172.26.6.100 255.255.0.0 IP mask

  ICMP unreachable rate-limit 1 burst-size 1

  enable ASDM history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_outbound_nat0_acl

  NAT (inside) 1 0.0.0.0 0.0.0.0

  static (inside, outside) 71.xx.xxx.251 172.26.5.9 netmask 255.255.255.255

  static (inside, outside) 71.xx.xxx.244 172.26.0.136 netmask 255.255.255.255

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 71.xx.xxx.241 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  Enable http server

  http 172.26.0.0 255.255.0.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5

  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_MD5

  Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS_ESP_3DES_MD5

  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd outside auto_config

  !

  no basic threat threat detection

  no statistical access list - a threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal DefaultRAGroup group strategy

  attributes of Group Policy DefaultRAGroup

  value of server WINS 172.26.0.250 172.26.0.251

  value of 172.26.0.250 DNS server 172.26.0.251

  Protocol-tunnel-VPN IPSec l2tp ipsec svc

  value by default-field TLCUSA

  internal LIMUVPNPOL1 group policy

  LIMUVPNPOL1 group policy attributes

  value of 172.26.0.250 DNS server 172.26.0.251

  VPN-idle-timeout 30

  Protocol-tunnel-VPN IPSec l2tp ipsec

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list LIMU_Split_Tunnel_List

  the address value VPN_POOL pools

  internal TLCVPNGROUP group policy

  TLCVPNGROUP group policy attributes

  value of 172.26.0.250 DNS server 172.26.0.251

  Protocol-tunnel-VPN IPSec l2tp ipsec svc

  Re-xauth disable

  enable IPSec-udp

  value by default-field TLCUSA

  barry.julien YCkQv7rLwCSNRqra06 + QXg password user name is nt encrypted privilege 0

  username barry.julien attributes

  VPN-group-policy TLCVPNGROUP

  Protocol-tunnel-VPN IPSec l2tp ipsec

  bjulien bhKBinDUWhYqGbP4 encrypted password username

  username bjulien attributes

  VPN-group-policy TLCVPNGROUP

  attributes global-tunnel-group DefaultRAGroup

  address VPN_POOL pool

  Group Policy - by default-DefaultRAGroup

  IPSec-attributes tunnel-group DefaultRAGroup

  pre-shared-key *.

  tunnel-group DefaultRAGroup ppp-attributes

  no authentication ms-chap-v1

  ms-chap-v2 authentication

  type tunnel-group TLCVPNGROUP remote access

  attributes global-tunnel-group TLCVPNGROUP

  address VPN_POOL pool

  Group Policy - by default-TLCVPNGROUP

  IPSec-attributes tunnel-group TLCVPNGROUP

  pre-shared-key *.

  ISAKMP ikev1-user authentication no

  tunnel-group TLCVPNGROUP ppp-attributes

  PAP Authentication

  ms-chap-v2 authentication

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  !

  global service-policy global_policy

  context of prompt hostname

  Cryptochecksum:b94898c163c59cee6c143943ba87e8a4

  : end

  enable ASDM history

  can you try to change the transformation of dynamic value ESP-3DES-SHA map.

  for example

  remove the encryption scheme dynamic-map outside_dyn_map 20 transform-set TRANS_ESP_3DES_MD5

  and replace with

  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA