AAA Authorization % failed.

Similar Questions

• AAA authorization fails, but still command is executed...

  Hello world

  I've implemented the authorization and he basically works. The user can only use a limited set of commands (show int status, conf t interface ethernet, gigabitethernet interface, interface fastethernet, closed, non-stop).

  Now, I'm trying to configure a loopback or interface Vlan, which should not be allowed.

  COMMANDS IN ŒUVRE:

  AAA authorization config-commands
  AAA authorization commands vty 0 group Ganymede + none
  AAA authorization commands 1 vty group Ganymede + none
  AAA authorization commands 15 vty group Ganymede + none

  line vty 0 15
  authorization to control vty 0
  vty orders 1 authorization
  authorization orders 15 vty

  COMMAND AND THE OUTPUT FROM THE TESTS:

  SWITCH (config) #int vlan 2
  Authorization of command failed.

  DEBUG AAA APPROVAL:

  SWITCH #.
  

  7 Dec 14:31:50: AAA: analyze name = tty1 BID type =-1 ATS = - 1
  

  7 Dec 14:31:50: AAA: name = tty1 flags = 0 x 11 type = 5 shelf = 0 = 0 = 0 = 1 0 = channel port adapter slot
  

  7 Dec 14:31:50: AAA/MEMORY: user create_user (0x46603F4) = "USER1" ruser = 'SWITCH' ds0 = 0 port =
  

  "tty1' rem_addr'10.10.255.249 = 'authen_type = ASCII service = NONE priv = 15 initial_task_id = ' 0', vrf = (id = 0)

  7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): Port = list "tty1" = "SCA" service = CMD
  

  7 Dec 14:31:50: AAA/AUTHOR/CMD: tty1 user (60725991) = "USER1".
  

  7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send service AV = shell
  

  7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send cmd = interface AV
  

  7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send cmd - arg = AV Vlan
  

  7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send cmd - arg = 2 AV
  

  7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send cmd - arg = AV
  

  7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): found the list "SCA".
  

  7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): method = Ganymede + (Ganymede +)
  

  7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): user = User1
  

  7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): send service AV = shell
  

  7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): send cmd = interface AV
  

  7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): send cmd - arg = AV Vlan
  

  7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): send cmd - arg = 2 AV
  

  7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): send cmd - arg = AV
  

  7 Dec 14:31:50: AAA/AUTHOR (60725991): permission post = FAIL
  

  7 Dec 14:31:50: AAA/MEMORY: free_user (0x46603F4) user = "USER1" ruser = "SWITCH" port = "tty1" r
  

  em_addr = '10.10.255.249' authen_type = ASCII service = NONE priv = 15

  
  

  As you can see the answer of the Ganymede is a "FAILURE", but still the command is executed.

  RESULT:

  SWITCH #sh run int vlan 2
  Building configuration...

  Current configuration: 38 bytes
  !
  interface Vlan2
  no ip address
  end

  QUESTION:

  I don't understand what the problem... Since I get a Ganymede Server FAILURE I guess that the configuration of this side is fine.

  But why the button ignore a FAILURE, always run the command? Same problem exists with the loopback Interface.

  Is it just me not the basic concept of AAA understandig or is it another problem?

  The switch is a Cisco WS-C3750-24TS (running c3750-ipbasek9 - mz.122 - 50.SE2.bin).

  The Ganymede running Cisco Secure ACS4.2.0.124

  Thank you

  Tom

  Hi Tom,

  It's CSCtd49491 : GANYMEDE authorization failed-command for the configuration of the interface.

  The bug is currently in a closed state, which means that the "bug report is valid, but a conscious decision accomplished not remedy all or all outputs."

  As far as I know, the impact is rather limited, given that the interface that is created has no effect unless the vlan exists, and even in this case, the effect is minimal since it cannot be configured.

  You can open a TAC case or work with your account team to get the bug if it is still a matter of concern but has reopened.

  HTH

  Herbert

• I am unable to connect with GANYMEDE + connection after the addition of aaa authorization network command

  Hello

  I test an aaa authentication switch when it does not communicate to ISE, and I found a strange behaviour. After that I added the aaa accounting and authorization authentication controls and reloaded the switch I was not able to connect to the switch with the GANYMEDE login

  The switch continued in cycles showing the banner give 3 times authentication failure message and then the cycle begins with the failed, banner and sign message

  I removed the aaa authorization network command and I reloaded the switch and I was able to connect successfully.

  could someone help me with this problem.

  Hi Nitesh-

  This command (... aaa authorization network) has nothing to do with the admin authorization on the n basis (in this case, the switch). This command applies to the network connections such as PPP, SLIP, etc.

  In addition, aaa authorization can be performed by Ray and not only GANYMEDE +. RADIUS is not too powerful and you can provide authorization command sets but you can always return roles and different levels of privilege.

  Have you tested the above configuration syntax? I did and it works as expected!

  Thank you for evaluating useful messages!

• AAA authorization problem

  I have the following Setup on my way...

  AAA new-model

  AAA authentication login default group Ganymede + local

  authentication connecting line CONSOLE of AAA.

  AAA authorization config-commands

  AAA authorization exec default group Ganymede + local

  AAA authorization commands 1 default group Ganymede + authenticated if

  AAA authorization commands by default 10 group Ganymede + authenticated if

  AAA authorization commands 15 default group Ganymede + authenticated if

  The problem is that when I log into the switch through the console port and enter these commands in, I instantly "Command authorization failed" on all orders get there. It's mind-boggling because there is no possible way that the switch is in talks with my Cisco ACS. I have not yet put in the radius-server key. I have to restart the box every time. What Miss me?

  Thank you for your time. I use IOS Version 12.2 (25) SEB4.

  -Andrew

  Hello

  Before proceeding with the configuration of Ganymede create a local user.

  Add the following commands.

  username cisco password cisco

  AAA new-model

  AAA authentication login default group Ganymede + local

  AAA authorization commands 1 default group Ganymede + authenticated if

  AAA authorization commands 15 default group Ganymede + authenticated if

  AAA authorization config-commands

  RADIUS-server host x.x.x.x

  GANYMEDE-server key...

  Please mark me if it helps you

• AAA authorization command console

  Hello

  I don't really understand the need of the command ""console permission aaa "."

  In fact we often set up these lines, which I already ar Editions by default VTY, Console, etc... :

  AAA authorization exec default group Ganymede + authenticated if

  AAA authorization commands 15 default group Ganymede + authenticated if

  Am I wrong? Or these lines only apply to the VTY linse?

  Thank you in advance

  In the IOS default Cisco does not permit on the console. When you configure aaa authorization, it is applied to vty but not to the console. Basically, it's to make it harder for lock you to in the router or switch. If you want permission to apply on the console then you must explicitly configure (and be very very careful that it is configured correctly, or you can wind up being locked out of the router - think especially how it will work when you can't get to the external aaa server that normally makes the authorization).

  HTH

  Rick

• interpretation of AAA authorization

  Hello..

  Is this a correct interpretation on aaa authorization?

  If I want to allow some commands or a certain privilege I use the following example

  AAA authorization command 7 Group Ganymede
  

  No authorization from aaa config-commands

  If you want to allow all commands, you must use the following:

  AAA authorization config-commands

  allow all orders except the configuration commands that we type in the configuration mode:

  Router (config) #.

  Configure a Terminal command is a command to exec level and should still be allowed in the command define the AAA server.

  Even if you are runnning access to level 15 and you turn on command authorizarion using a RADIUS AAA server on this level 15, all the commands you type will be checked at the server level to see if they were authorized or not.

  Tariq

• The AAA authorization

  Im trying to configure the authentication of AAA using username privililege password 15 xxxx xxxxx. I would like to make sure he users with the privilege level 15 go straight to activate the mode, and users with level 1 prvilege will go directly to the router > read-only. Currently the conly orders I typed are user name

  xxx xxxx privilege 15 password

  AAA new-model

  Do I need to configure anything else. I tried to put the privilege under int vty level but then all users mode privilege. I want to only use AAA I don't want to set up a server radius or teacs to have3. Thanks in advance.

  To use privilege levels, you need to set the authorization and authentication. The following should do the trick for you:

  username cisco password 0 privilege 15 glenn

  username fred privilege 1 0 password cisco

  !

  AAA new-model

  AAA authentication login default local

  AAA authorization exec default local

  Now if I connect:

  > telnet 10.66.79.100

  User access audit

  Username: glenn

  Password:

  Router #sho priv

  Current privilege level is 15

  Router #q

  >

  >

  > telnet 10.66.79.100

  User access audit

  User name: fred

  Password:

  Router > sho priv

  Current privilege level is 1

  Router > q

• AAA authorization commands

  Hi all

  Probably, I'll ask a stupid question but I am really confused about the purpose of the "x by default local aaa authorization commands" command. I understand that if this command is configured, it allows each order of this level, but in my experience, this command does nothing. The result is the same whether or not it is configured.

  Here is my config part aaa

  cisco cisco username privilege 15 secret

  AAA new-model

  AAA authentication login default local activate

  AAA authorization exec default local authenticated by FIS

  AAA authorization commands 15 local default authenticated by FIS

  Now if I keep the last command or remove, user name "cisco" is able to use each command level 15 so my question is, why would I bother to configure this command?

  Would really appreciate your quick response

  Concerning

  Hi Charlotte,.

  According to my understanding of the database of the local user you don't need to have permission from aaa in the network device... If you use any Ganymede + / Radius authentication servers, then it will be more efficient, you can set an attributes to the user profile and through which you can play the config access level users at certain level...

  When it is with a local database, to approval based on the level of privileage we set locally on the device and he never looks for aaa... reference local authorization is limited and more that it is limited to sets of levels of privileage on the specific profile...

  You can go through the below document mentioned for your apprenticeship on aaa...

  http://www.Cisco.com/c/en/us/TD/docs/iOS/12_2/Security/command/reference...

  Concerning

  Knockaert

• MAB with Cisco Phone - authorization failed

  Hello everyone,

  I use MAB to authenticate customers and Cisco IP phones against a NPS Microsoft Radius server. Everything works perfectly, except for 1 phone Cisco. The phone is successfully authentication but authorization fails. The switch port has the following configuration.

  switchport access vlan 500
  switchport mode access
  switchport nonegotiate
  switchport voice vlan 92
  no logging event link-status
  srr-queue bandwidth share 1 30 35 5
  priority-queue out
  authentication control-direction in
  authentication event server dead action authorize voice
  authentication host-mode multi-domain
  authentication port-control auto
  authentication periodic
  authentication timer reauthenticate 10800
  authentication timer inactivity 1800
  mab
  no snmp trap link-status
  mls qos trust device cisco-phone
  mls qos trust cos
  macro description mab
  auto qos voip cisco-phone
  storm-control broadcast level 5.00
  storm-control action shutdown
  spanning-tree portfast
  spanning-tree bpduguard enable
  service-policy input AUTOQOS-SRND4-CISCOPHONE-POLICY
  

  I get the following RADIUS logging of the client authentication process.

  May  7 15:24:53.349: RADIUS:   4D 8F 05 AB 00 00 01 37 00 01 02 00 0A 19 0A 84 00 00 00 00 00 00 00 00 00 00 00 00 01 CE 47 DF 2A A4 B3 70 00 00 00 00 00 00 5F 79           [ M7G*p_y]
  May  7 15:24:53.349: RADIUS:  Vendor, Cisco       [26]  34
  May  7 15:24:53.349: RADIUS:   Cisco AVpair       [1]   28  "device-traffic-class=voice"
  May  7 15:24:53.358: RADIUS(00002749): Received from id 1645/128
  May  7 15:24:53.366: %MAB-5-SUCCESS: Authentication successful for client (442b.03a2.f9e8) on Interface Gi1/0/39 AuditSessionID 0A194B0400002706ED82EB13
  May  7 15:24:53.374: %AUTHMGR-7-RESULT: Authentication result 'success' from 'mab' for client (442b.03a2.f9e8) on Interface Gi1/0/39 AuditSessionID 0A194B0400002706ED82EB13
  SER-02-SW01#clear authentication
  May  7 15:24:53.383: %AUTHMGR-5-FAIL: Authorization failed or unapplied for client (442b.03a2.f9e8) on Interface Gi1/0/39 AuditSessionID 0A194B0400002706ED82EB13
  

  I checked online and blogs and forums suggest to check the use of the downloadable access list, but they are not used in the switch. As mentioned, all Cisco IP phones works perfectly, except this one. I have already removed the Active Directory object and created a new object from scratch, but the same result. I also tried another port in the switch, yet an authorization failure.

  Currently, I don't know where to look further, then maybe some of you can help me!

  Thanks for the update of René. I have suggested for deactivation and reactivation of the dot1x in the world to see where it got stuck somewhere. However, it seems the thought is not okay. Would appreciate if you mark it resolved so that someone else can take advantages out of it.

  Your welcome

  Good day!

  Jatin kone

  -Does the rate of useful messages-

• ORA-29279: SMTP permanent error: 535 authorization failed (#5.7.0)

  Hello
  
  Can someone help me to find the number in the given pakg.
  I'm tring to send e-mails through this package, but I make a few mistakes: -.
  
  create or replace package body mail_pkg
  as
  function address_email (p_string in varchar2,
  p_recipients table) return varchar2
  is
  long l_recipients;
  Start
  because me in 1... p_recipients. Count
  loop
  UTL_SMTP. RCPT (g_mail_conn, p_recipients (i));
  If (l_recipients is null)
  then
  l_recipients: = p_string | p_recipients (i);
  on the other
  l_recipients: = l_recipients | ', ' || p_recipients (i);
  end if;
  end loop;
  Return l_recipients;
  end;
  
  procedure writeData (p_text in varchar2)
  as
  Start
  If (p_text is not null)
  then
  UTL_SMTP.write_data (g_mail_conn, p_text | g_crlf);
  end if;
  end;
  
  procedure to send (p_sender_email in varchar2,
  P_FROM in varchar2,
  p_to in the table by default array(),
  p_cc in the table by default array(),
  p_bcc in the table by default array(),
  p_subject in varchar2,
  p_body long)
  is
  long l_to_list;
  long l_cc_list;
  long l_bcc_list;
  l_date VARCHAR2 (255) default TO_CHAR (SYSDATE, 'dd my hh24:mi:ss yy') | ' + 8:00 (GMT + 08:00) ";
  
  Start
  SELECT PARAM_VALUE IN g_mailhost OF IHR_PARAM_DATA
  WHERE PARAM_CODE = 'MAIL_HOST' AND
  ((CATÉGORIE = S ')) AND
  (((FROM_DATE EST NULL) AND (TO_DATE IS NOTHING)) OR)
  ((FROM_DATE EST NULL) AND (TO_DATE > = trunc (sysdate))) OR
  ((FROM_DATE < = trunc (sysdate)) AND (TO_DATE IS NULL)) OR
  ((FROM_DATE < = trunc (sysdate)) AND (TO_DATE > = trunc (sysdate))) AND
  SEQUENCE = (SELECT MIN (SEQUENCE) IHR_PARAM_DATA
  WHERE PARAM_CODE = 'MAIL_HOST' AND
  ((CATÉGORIE = S ')) AND
  (((FROM_DATE EST NULL) AND (TO_DATE IS NOTHING)) OR)
  ((FROM_DATE EST NULL) AND (TO_DATE > = trunc (sysdate))) OR
  ((FROM_DATE < = trunc (sysdate)) AND (TO_DATE IS NULL)) OR
  ((FROM_DATE < = trunc (sysdate)) AND (TO_DATE > = TRUNC (SYSDATE))) );
  
  g_mail_conn: = utl_smtp.open_connection (g_mailhost, 25);
  UTL_SMTP. HELO (g_mail_conn, g_mailhost);
  UTL_SMTP.command (g_mail_conn, 'auth login');
  UTL_SMTP.command (g_mail_conn,
  mail_pkg.f_base64_encode_raw (utl_raw.cast_to_raw ('mailuser')));
  UTL_SMTP.command (g_mail_conn,
  mail_pkg.f_base64_encode_raw (utl_raw.cast_to_raw('***')));
  UTL_SMTP.mail (g_mail_conn, p_sender_email);
  l_to_list: = address_email ("to:", p_to);
  l_cc_list: = address_email ("Cc:", p_cc);
  l_bcc_list: = address_email ("Bcc:", p_bcc);
  UTL_SMTP.open_data (g_mail_conn);
  
  writeData (' Date: ' | l_date);
  writeData (' to: ' | nvl (p_from, p_sender_email));
  writeData (' subject: ' | nvl (p_subject, '(aucun sujet) "));
  
  writeData (l_to_list);
  writeData (l_cc_list);
  
  UTL_SMTP.write_data (g_mail_conn, "| g_crlf);
  UTL_SMTP.write_data (g_mail_conn, p_body);
  UTL_SMTP.close_data (g_mail_conn);
  UTL_SMTP. Quit (g_mail_conn);
  end;
  end;
  
  
  I get the below error when tring to run the procedure, even if my e-mail and password are correct.
  
  ERROR on line 1:
  ORA-29279: SMTP permanent error: 535 authorization failed (#5.7.0)
  ORA-06512: at "SYS." UTL_SMTP", line 21
  ORA-06512: at "SYS." UTL_SMTP", line 99
  ORA-06512: at "SYS." UTL_SMTP", line 159
  ORA-06512: at "SYSTEM. SEND_MAIL', line 12
  ORA-06512: at line 1
  
  pls help;
  
  Thank you
  Uttam Singh
  
  Published by: Uttam Singh on December 26, 2008 19:56

  Uttam,

  This error is due to wrong settings of the SMTP server. Oracle, very probably has nothing to do with it. If I remember correctly, you are using Gmail for her. I guess there is a problem with it. Try with some other parameters of the field. I'll try to use the same with my own domain name. In the meantime, enjoy these two link.
  http://www.williamrobertson.NET/code/utilities.pkg.txt
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:2118740358226 #9206460145191
  HTH
  Aman...

• command authorization failed

  I turned on the aaa command authorization without applying the correct user privileges. I can now log on this user, but the ASA 5510 displays an error:

  ============================

  EUKFW2 # show running-config

  ^

  % ERROR: invalid input detected at ' ^' marker.

  ERROR: Failed authorization control

  ============================

  I'm unable to change the configuration of the firewall. Is there any default user through which I can connect and disable the authorization of aaa? If this is not the case, how can I solve this problem?

  Please visit this link

  http://www.ciscotaccc.com/Kaidara-Advisor/security/showcase?case=K10386224

  Please evaluate the useful messages

  Kind regards

  ~ JG

• ACS command 4.1 authorization failing intermittently

  Hello

  I have installation switches aaa using Ganymede + on the network, however I seem to get occasional command authorization error. It shows when I try entering the command on multiple ports at the same time (example interface range giga 1/1-48). If I had to do on one lane instead, I does not seem to encounter the error. It would be because of the ACS, unable to carry the load? It is only for a single switch to run the command for port ranges.

  I've attached an example of the error of reference:

  switch (config-if-range) #description level 3
  % Failed authorization.

  % Command failed on the beach of the interface. Abandonment

  I checked the interface to connect to the ACS, and I see no error. I'm not too sure of what may be the cause of error. Would it be because of the ACS unable to work well with the range of interface?

  Thank you.

  There is a bug open for this issue which is found in subsection 12.2 (46), and for the moment there is no plans how to solve the problem because it involves a design work in the code to fix this. The only work around is to remove permission to order or to see what your limit is on the beach inteface command entered begins to drop requests.

• Authorization failed and "accessing itunes store" maintains a loop

  Hello

  I have problem, first I can not connect to itunes store, can I remove the permission on this computer. But when I try to authorize dungeons failed and message "canned"accessing itunes store"loop. And after only 10 minutes I put warn something as "blah blah blah network connection has been lost. I have good connection and have no problem with any internet connection. There for 2 months I have a problem, I tried all of the solutions I found, but still I can't connect to itunes store.

  I did the test proposed by Linc Davis, and the result is:

  Check-out time: 12:54:10 06/22/16

  Model identifier: MacPro5, 1

  The system version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Integrity of system protection: enabled

  Since the start time: 02:05

  SATA

  WDC WD4003FZEX-00Z4SA0

  Crucial_CT256MX100SSD1

  WDC WD20EARS-19MVWB0

  WDC WD40EZRX-00SPEB0

  USB

  Mouse USB LaserStream (TM) (Avago Technologies, Pte.)

  Ultra (SanDisk Corporation)

  boot args: nvda_drv = 1

  Journal

  June 22 at 11:55:24 Preview [1566] taken causing excessive Awakenings of the process. EXC_RESOURCE lost audio playback

  Activity

  NET: 892 in 46 (KiB/s)

  The current downstream data: BitTorrent (UID 501) uses 652.857 KiB/s

  The current data upstream: BitTorrent (UID 501) uses 25.9157 KiB/s

  Memory: Adobe Photoshop (UID 501) use 5051 MB

  kexts

  com.nvidia.web.NVDAResmanWeb (10.1.1) UUID

  com.nvidia.web.NVDAGK100HalWeb (10.1.1) UUID

  com.nvidia.web.GeForceWeb (10.1.1) UUID

  tc.tctechnologies.driver.Saffire (4.1.4 18735) UUID

  com Apowersoft.driver.AudioDevice (1.6.7) UUID

  com.focusrite.driver.FocusritePCIe (4.4.0 175) UUID

  com.nvidia.CUDA (1.1.0) UUID

  com Disc - soft.DAEMONTools.VirtualSCSIBus (1.0.2) UUID

  Demons

  com.macpaw.CleanMyMac3.Agent

  com BlueStacks.AppPlayer.bstservice_helper

  com Charlessoft.Pacifist.Helper

  org.tcpdump.chmod_bpf

  com.adobe.ARMDC.Communicator

  com.transcend.RxRecoveryHelper

  com NVIDIA. CUDA. Launcher

  com.focusrite.ControlServer

  com Elgato.eyeconnectd

  com Microsoft.Office.Licensing.Helper

  com RogueAmoeba.InstantOn - agent

  com.google.Keystone.daemon

  Adobe_Genuine_Software_Integrity_Service

  com.adobe.SwitchBoard

  Acronis.Update

  com Disc - soft.DAEMONTools.PrivilegedHelper

  com NVIDIA.nvroothelper

  com.adobe.ARMDC.SMJobBlessHelper

  com.Bombich.ccchelper

  tc.tctechnologies.daemon.Saffire

  Agents

  com.google.Keystone.System.agent

  com Disc - soft.DAEMONTools.DAEMONToolsAgent

  com BlueStacks.AppPlayer.Service

  com.bittorrent.BitTorrent

  com.adobe.ARMDCHelper.UUID

  com.adobe.CS5ServiceManager

  com.macpaw.CleanMyMac3.Scheduler

  com BlueStacks.AppPlayer.UninstallWatcher

  com NVIDIA.nvagent

  com Spotify.webhelper

  com.tidal.LaunchHelper

  com.nvidia.CUDASoftwareUpdate

  com Acronis.Monitor

  com BlueStacks.AppPlayer.Updater

  launchd

  / System/Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist

  -com.apple.installer.osmessagetracing

  /Library/LaunchAgents/com.Adobe.AAM.Updater-1.0.plist

  -com.adobe.AAM.Startup - 1.0

  /Library/LaunchAgents/com.Adobe.ARMDCHelper.UUID.plist

  -com.adobe.ARMDCHelper.UUID

  /Library/LaunchAgents/com.Adobe.CS5ServiceManager.plist

  -com.adobe.CS5ServiceManager

  /Library/LaunchAgents/com.Google.keystone.agent.plist

  -com.google.keystone.system.agent

  / Library/LaunchAgents/com. NVIDIA. CUDASoftwareUpdate.plist

  -com.nvidia.CUDASoftwareUpdate

  / Library/LaunchAgents/com. NVIDIA.nvagent.plist

  -com.nvidia.nvagent

  / Library/LaunchDaemons/com. Acronis.Update.plist

  -acronis.update

  /Library/LaunchDaemons/com.Adobe.agsservice.plist

  -Adobe_Genuine_Software_Integrity_Service

  /Library/LaunchDaemons/com.Adobe.ARMDC.Communicator.plist

  -com.adobe.ARMDC.Communicator

  /Library/LaunchDaemons/com.Adobe.ARMDC.SMJobBlessHelper.plist

  -com.adobe.ARMDC.SMJobBlessHelper

  /Library/LaunchDaemons/com.Adobe.switchboard.plist

  -com.adobe.SwitchBoard

  / Library/LaunchDaemons/com. BlueStacks.AppPlayer.bstservice_helper.plist

  -com BlueStacks.AppPlayer.bstservice_helper

  /Library/LaunchDaemons/com.Bombich.ccchelper.plist

  -com.bombich.ccchelper

  / Library/LaunchDaemons/com. Charlessoft.Pacifist.Helper.plist

  -com.charlessoft.pacifist.helper

  / Library/LaunchDaemons/com. Disc - Soft.DAEMONTools.PrivilegedHelper.plist

  -com.disc - soft.DAEMONTools.PrivilegedHelper

  / Library/LaunchDaemons/com. Elgato.EyeConnect.plist

  -com.elgato.eyeconnectd

  / Library/LaunchDaemons/com. Focusrite.ControlServer.plist

  -com.focusrite.ControlServer

  /Library/LaunchDaemons/com.Google.keystone.daemon.plist

  -com.google.keystone.daemon

  /Library/LaunchDaemons/com.macpaw.CleanMyMac3.agent.plist

  -com.macpaw.CleanMyMac3.Agent

  / Library/LaunchDaemons/com. Microsoft.Office.Licensing.Helper.plist

  -com.microsoft.office.licensing.helper

  / Library/LaunchDaemons/com. NVIDIA. CUDA. Launcher.plist

  -com.nvidia.cuda.launcher

  / Library/LaunchDaemons/com. NVIDIA.nvroothelper.plist

  -com.nvidia.nvroothelper

  / Library/LaunchDaemons/com. RogueAmoeba.InstantOn - agent.plist

  -com.rogueamoeba.instanton - agent

  / Library/LaunchDaemons/com. Transcend.RxRecoveryHelper.plist

  -com.transcend.RxRecoveryHelper

  /Library/LaunchDaemons/org.tcpdump.chmod_bpf.plist

  -org.tcpdump.chmod_bpf

  /Library/LaunchDaemons/TC.tctechnologies.Saffire.plist

  -tc.tctechnologies.daemon.Saffire

  Library/LaunchAgents/com.acronis.monitor.plist

  -com.acronis.monitor

  Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist

  -com.adobe.AAM.Scheduler - 1.0

  Library/LaunchAgents/com.bittorrent.BitTorrent.plist

  -com.bittorrent.BitTorrent

  Com/library/LaunchAgents. BlueStacks.AppPlayer.Service.plist

  -com BlueStacks.AppPlayer.Service

  Com/library/LaunchAgents. BlueStacks.AppPlayer.UninstallWatcher.plist

  -com BlueStacks.AppPlayer.UninstallWatcher

  Com/library/LaunchAgents. BlueStacks.AppPlayer.Updater.plist

  -com BlueStacks.AppPlayer.Updater

  Library/LaunchAgents/com.disc-soft.DAEMONTools.DAEMONToolsAgent.plist

  -com.disc - soft.DAEMONTools.DAEMONToolsAgent

  Library/LaunchAgents/com.macpaw.CleanMyMac3.Scheduler.plist

  -com.macpaw.CleanMyMac3.Scheduler

  Library/LaunchAgents/com.spotify.webhelper.plist

  -com.spotify.webhelper

  Startup items

  / Library/StartupItems/ProTec6b/DemoOver

  / Library/StartupItems/ProTec6b/Nalpeirond6b

  / Library/StartupItems/ProTec6b/ProTec6b

  /Library/StartupItems/ProTec6b/StartupParameters.plist

  Beams

  /System/Library/Extensions/AuthenticationSupport.plugin

  -com SecuritySolutions.AuthenticationSupport

  /System/Library/Extensions/AuthenticationSupportEnabler.plugin

  -com SecuritySolutions.AuthenticationSupportEnabler

  /System/Library/Extensions/CUDA.kext

  -com.nvidia.CUDA

  /System/Library/Extensions/FocusriteUSBAudio.kext

  -com.focusrite.driver.usb.audio

  /System/Library/Extensions/GeForceAIRPluginWeb.bundle

  -com.nvidia.web.GeForceAIRPluginWeb

  /System/Library/Extensions/GeForceGLDriverWeb.bundle

  -com.nvidia.web.GeForceGLDriverWeb

  /System/Library/Extensions/GeForceMTLDriverWeb.bundle

  -com.nvidia.web.GeForceMTLDriverWeb

  /System/Library/Extensions/GeForceTeslaGAWeb.plugin

  -com.nvidia.web.GeForceTeslaGAWeb

  /System/Library/Extensions/GeForceTeslaGLDriverWeb.bundle

  -com.nvidia.web.GeForceTeslaGLDriverWeb

  /System/Library/Extensions/GeForceTeslaVADriverWeb.bundle

  -com.nvidia.web.GeForceTeslaVADriverWeb

  /System/Library/Extensions/GeForceTeslaWeb.kext

  -com.nvidia.web.GeForceTeslaWeb

  /System/Library/Extensions/GeForceVADriverWeb.bundle

  -com.nvidia.web.GeForceVADriverWeb

  /System/Library/Extensions/GeForceWeb.kext

  -com.nvidia.web.GeForceWeb

  /System/Library/Extensions/JMicronATA.kext

  -com.jmicron.JMicronATA

  /System/Library/Extensions/NovationUSBAudio.kext

  -com.novationmusic.driver.usb.audio

  /System/Library/Extensions/NVDAGF100HalWeb.kext

  -com.nvidia.web.NVDAGF100HalWeb

  /System/Library/Extensions/NVDAGK100HalWeb.kext

  -com.nvidia.web.NVDAGK100HalWeb

  /System/Library/Extensions/NVDAGM100HalWeb.kext

  -com.nvidia.web.NVDAGM100HalWeb

  /System/Library/Extensions/NVDANV50HalTeslaWeb.kext

  -com.nvidia.web.NVDANV50HalTeslaWeb

  /System/Library/Extensions/NVDAResmanTeslaWeb.kext

  -com.nvidia.web.NVDAResmanTeslaWeb

  /System/Library/Extensions/NVDAResmanWeb.kext

  -com.nvidia.web.NVDAResmanWeb

  /System/Library/Extensions/NVDAStartupWeb.kext

  -com.nvidia.NVDAStartupWeb

  /System/Library/Extensions/Saffire.kext

  -tc.tctechnologies.driver.Saffire

  /System/Library/Extensions/Soundflower.kext

  -com Cycling74.Driver.Soundflower

  / Library/Apowersoft Mac Audio Recorder/uninstall Apowersoft Audio Recorder.app

  Apowersoft.Uninstall - Apowersoft-Audio-recorder

  / Library/Audio/MIDI drivers/FocusritePCIeMIDIDriver.plugin

  -com.focusrite.FocusritePCIe.midiplugin

  / Library/Audio/MIDI drivers/NIUSBMIDIDriver.plugin

  S/O

  / Library/Audio/MIDI drivers/NovationUSBMIDIDriver.plugin

  -com.novationmusic.driver.usb.midi

  / Library/Audio/MIDI drivers/SaffireMIDIDriver.plugin

  -tc.tctechnologies.Saffire.midiplugin

  / Component library/Audio/Plug-Ins/components/Guitar Rig 5.

  S/O

  /Library/audio/plug-ins/components/iZInsightAUHook.component

  -com.izotope.audioplugins.AU.Insight

  /Library/audio/plug-ins/components/iZMeterTapAUHook.component

  S/O

  /Library/audio/plug-ins/components/iZOzone6AUHook.component

  -com.izotope.audioplugins.AU.Ozone6

  /Library/audio/plug-ins/components/iZOzone6DynamicsAUHook.component

  -com.izotope.audioplugins.AU.Ozone6DYN

  /Library/audio/plug-ins/components/iZOzone6DynEqAUHook.component

  -com.izotope.audioplugins.AU.Ozone6DYNEQ

  /Library/audio/plug-ins/components/iZOzone6EqualizerAUHook.component

  -com.izotope.audioplugins.AU.Ozone6EQ

  /Library/audio/plug-ins/components/iZOzone6ExciterAUHook.component

  -com.izotope.audioplugins.AU.Ozone6EXC

  /Library/audio/plug-ins/components/iZOzone6ImagerAUHook.component

  -com.izotope.audioplugins.AU.Ozone6IMG

  /Library/audio/plug-ins/components/iZOzone6MaximizerAUHook.component

  -com.izotope.audioplugins.AU.Ozone6MAX

  /Library/audio/plug-ins/components/iZRX5ConnectAUHook.component

  -com.izotope.audioplugins.AU.RX5Connect

  /Library/audio/plug-ins/components/iZRX5DeclickerAUHook.component

  -com.izotope.audioplugins.AU.RX5Declicker

  /Library/audio/plug-ins/components/iZRX5DeclipperAUHook.component

  -com.izotope.audioplugins.AU.RX5Declipper

  /Library/audio/plug-ins/components/iZRX5DecracklerAUHook.component

  -com.izotope.audioplugins.AU.RX5Decrackler

  /Library/audio/plug-ins/components/iZRX5DenoiserAUHook.component

  -com.izotope.audioplugins.AU.RX5Denoiser

  /Library/audio/plug-ins/components/iZRX5DereverbAUHook.component

  -com.izotope.audioplugins.AU.RX5Dereverb

  /Library/audio/plug-ins/components/iZRX5DialogueDenoiserAUHook.component

  -com.izotope.audioplugins.AU.RX5DlgDenoiser

  /Library/audio/plug-ins/components/iZRX5HumRemovalAUHook.component

  -com.izotope.audioplugins.AU.RX5HumRemoval

  /Library/audio/plug-ins/components/iZRX5MonitorAUHook.component

  -com.izotope.audioplugins.AU.RX5Monitor

  /Library/audio/plug-ins/HAL/FocusritePCIeAudio.driver

  -com.focusrite.FocusritePCIeAudio

  /Library/audio/plug-ins/HAL/InstantOn.driver

  -com.rogueamoeba.InstantOn.driver

  / Library/Audio/Plug-Ins/VST/Guitar Rig 5. VST

  S/O

  / Library/Audio/Plug-Ins/VST/iZotope Insight.vst

  -com.izotope.audioplugins.VST.Insight

  / Library/Audio/Plug-Ins/VST/iZotope meter Tap.vst

  S/O

  / Library/Audio/Plug-Ins/VST/iZotope Ozone 6 dynamic EQ.vst

  -com.izotope.audioplugins.VST.Ozone6DYNEQ

  / Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Dynamics.vst

  -com.izotope.audioplugins.VST.Ozone6DYN

  / Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Equalizer.vst

  -com.izotope.audioplugins.VST.Ozone6EQ

  / Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Exciter.vst

  -com.izotope.audioplugins.VST.Ozone6EXC

  / Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Imager.vst

  -com.izotope.audioplugins.VST.Ozone6IMG

  / Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Maximizer.vst

  -com.izotope.audioplugins.VST.Ozone6MAX

  / Library/Audio/Plug-Ins/VST/iZotope Ozone 6. VST

  -com.izotope.audioplugins.VST.Ozone6

  / Library/Audio/Plug-Ins/VST/iZotope RX 5 Connect.vst

  -com.izotope.audioplugins.VST.RX5Connect

  / Library/Audio/Plug-Ins/VST/iZotope RX 5-click.vst

  -com.izotope.audioplugins.VST.RX5Declicker

  / Library/Audio/Plug-Ins/VST/iZotope RX 5-clip.vst

  -com.izotope.audioplugins.VST.RX5Declipper

  / Library/Audio/Plug-Ins/VST/iZotope RX 5-crackle.vst

  -com.izotope.audioplugins.VST.RX5Decrackler

  / Library/Audio/Plug-Ins/VST/iZotope RX 5-UM .vst

  -com.izotope.audioplugins.VST.RX5HumRemoval

  / Library/Audio/Plug-Ins/VST/iZotope RX 5-noise.vst

  -com.izotope.audioplugins.VST.RX5Denoiser

  / Library/Audio/Plug-Ins/VST/iZotope RX 5-reverb.vst

  -com.izotope.audioplugins.VST.RX5Dereverb

  / Library/Audio/Plug-Ins/VST/iZotope RX 5 Dialogue-noise.vst

  -com.izotope.audioplugins.VST.RX5DlgDenoiser

  / Library/Audio/Plug-Ins/VST/iZotope RX 5 Monitor.vst

  -com.izotope.audioplugins.VST.RX5Monitor

  / Library/Audio/Plug-Ins/VST3/iZotope Insight.vst3

  -com.izotope.audioplugins.VST.Insight

  / Library/Audio/Plug-Ins/VST3/iZotope meter Tap.vst3

  S/O

  / Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 dynamic EQ.vst3

  -com.izotope.audioplugins.VST.Ozone6DYNEQ

  / Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Dynamics.vst3

  -com.izotope.audioplugins.VST.Ozone6DYN

  / Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Equalizer.vst3

  -com.izotope.audioplugins.VST.Ozone6EQ

  / Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Exciter.vst3

  -com.izotope.audioplugins.VST.Ozone6EXC

  / Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Imager.vst3

  -com.izotope.audioplugins.VST.Ozone6IMG

  / Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Maximizer.vst3

  -com.izotope.audioplugins.VST.Ozone6MAX

  / Library/Audio/Plug-Ins/VST3/iZotope Ozone 6.vst3

  -com.izotope.audioplugins.VST.Ozone6

  / Library/Audio/Plug-Ins/VST3/iZotope RX 5 Connect.vst3

  -com.izotope.audioplugins.VST.RX5Connect

  / Library/Audio/Plug-Ins/VST3/iZotope RX 5-click.vst3

  -com.izotope.audioplugins.VST.RX5Declicker

  / Library/Audio/Plug-Ins/VST3/iZotope RX 5-clip.vst3

  -com.izotope.audioplugins.VST.RX5Declipper

  / Library/Audio/Plug-Ins/VST3/iZotope RX 5-crackle.vst3

  -com.izotope.audioplugins.VST.RX5Decrackler

  / Library/Audio/Plug-Ins/VST3/iZotope RX 5-UM .vst3

  -com.izotope.audioplugins.VST.RX5HumRemoval

  / Library/Audio/Plug-Ins/VST3/iZotope RX 5-noise.vst3

  -com.izotope.audioplugins.VST.RX5Denoiser

  / Library/Audio/Plug-Ins/VST3/iZotope RX 5-reverb.vst3

  -com.izotope.audioplugins.VST.RX5Dereverb

  / Library/Audio/Plug-Ins/VST3/iZotope RX 5 Dialogue-noise.vst3

  -com.izotope.audioplugins.VST.RX5DlgDenoiser

  / Library/Audio/Plug-Ins/VST3/iZotope RX 5 Monitor.vst3

  -com.izotope.audioplugins.VST.RX5Monitor

  /Library/components/FLACAudioCodec.component

  -com.mycompany.myformat

  /Library/components/FLACAudioFileComponent.component

  -com.Acme.audio.files.Components

  /Library/Extensions/Apowersoft_AudioDevice.kext

  -com Apowersoft.driver.AudioDevice

  /Library/Extensions/FocusritePCIe.kext

  -com.focusrite.driver.FocusritePCIe

  /Library/Extensions/NIUSBAudioDriver.kext

  -com.caiaq.driver.NIUSBHardwareDriver

  /Library/Extensions/NIUSBGuitarRigMobile.kext

  -com.caiaq.driver.NIUSBGuitarRigMobileDriver

  / / Library/Internet Plug-Ins/AdobeAAMDetect.plugin

  -com AdobeAAMDetectLib.AdobeAAMDetect

  / / Library/Internet Plug-Ins/AdobePDFViewer.plugin

  -com.adobe.acrobat.pdfviewer

  / / Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin

  -com.adobe.acrobat.pdfviewerNPAPI

  / / Library/Internet Plug-Ins/JavaAppletPlugin.plugin

  -com.apple.java.JavaAppletPlugin

  / / Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin

  -com.microsoft.sharepoint.browserplugin

  / / Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin

  -com.microsoft.sharepoint.webkitplugin

  / / Library/Internet Plug-Ins/Silverlight.plugin

  -com.microsoft.SilverlightPlugin

  / Library/PreferencePanes/CUDA Preferences.prefPane

  -com.nvidia.CUDAPref

  /Library/PreferencePanes/EyeConnect.prefPane

  -com.elgato.preference.EyeConnect

  /Library/PreferencePanes/MacFUSE.prefPane

  -com.google.MacFUSE

  /Library/PreferencePanes/NIUSBAudio.prefPane

  -com.caiaq.NIUSBAudioPreferencePane

  /Library/PreferencePanes/NTFS-3G.prefPane

  -org.catacombae.macntfs - 3 g .prefpane

  /Library/PreferencePanes/NTFSforMacOSX.prefPane

  -com.paragon - software.filesystems.ntfs.prefpanel

  / Library/PreferencePanes/NVIDIA Driver Manager.prefPane

  -com.nvidia.nvprefpane

  /Library/PreferencePanes/OSXFUSE.prefPane

  -com.github.osxfuse.OSXFUSEPrefPane

  / Library/ScriptingAdditions/Adobe unit Types.osax

  S/O

  Library/Audio/Plug-Ins/VST/AU/iZInsightAUHook.component

  -com.izotope.audioplugins.AU.Insight

  Library/Audio/Plug-Ins/VST/AU/iZRX5ConnectAUHook.component

  -com.izotope.audioplugins.AU.RX5Connect

  Library/Audio/Plug-Ins/VST/AU/iZRX5DeclickerAUHook.component

  -com.izotope.audioplugins.AU.RX5Declicker

  Library/Audio/Plug-Ins/VST/AU/iZRX5DeclipperAUHook.component

  -com.izotope.audioplugins.AU.RX5Declipper

  Library/Audio/Plug-Ins/VST/AU/iZRX5DecracklerAUHook.component

  -com.izotope.audioplugins.AU.RX5Decrackler

  Library/Audio/Plug-Ins/VST/AU/iZRX5DenoiserAUHook.component

  -com.izotope.audioplugins.AU.RX5Denoiser

  Library/Audio/Plug-Ins/VST/AU/iZRX5DereverbAUHook.component

  -com.izotope.audioplugins.AU.RX5Dereverb

  Library/Audio/Plug-Ins/VST/AU/iZRX5DialogueDenoiserAUHook.component

  -com.izotope.audioplugins.AU.RX5DlgDenoiser

  Library/Audio/Plug-Ins/VST/AU/iZRX5HumRemovalAUHook.component

  -com.izotope.audioplugins.AU.RX5HumRemoval

  Library/Audio/Plug-Ins/VST/AU/iZRX5MonitorAUHook.component

  -com.izotope.audioplugins.AU.RX5Monitor

  Library/Audio/Plug-Ins/VST/iZotope RX 5 Audio Editor.app

  -com.izotope.audioapps.rx5

  Library/Audio/Plug-Ins/VST/RTAS/iZInsightPTHook.dpm

  -com.izotope.audioplugins.PT.Insight

  Library/Audio/Plug-Ins/VST/RTAS/iZRX5AmbienceMatchPTHook.dpm

  -com.izotope.audioplugins.PT.RX5AmbienceMatch

  Library/Audio/Plug-Ins/VST/RTAS/iZRX5ConnectPTHook.dpm

  -com.izotope.audioplugins.PT.RX5Connect

  Library/Audio/Plug-Ins/VST/RTAS/iZRX5DeclickerPTHook.dpm

  -com.izotope.audioplugins.PT.RX5Declicker

  Library/Audio/Plug-Ins/VST/RTAS/iZRX5DeclipperPTHook.dpm

  -com.izotope.audioplugins.PT.RX5Declipper

  Library/Audio/Plug-Ins/VST/RTAS/iZRX5DecracklerPTHook.dpm

  -com.izotope.audioplugins.PT.RX5Decrackler

  Library/Audio/Plug-Ins/VST/RTAS/iZRX5DenoiserPTHook.dpm

  -com.izotope.audioplugins.PT.RX5Denoiser

  Library/Audio/Plug-Ins/VST/RTAS/iZRX5DereverbPTHook.dpm

  -com.izotope.audioplugins.PT.RX5Dereverb

  Library/Audio/Plug-Ins/VST/RTAS/iZRX5DialogueDenoiserPTHook.dpm

  -com.izotope.audioplugins.PT.RX5DlgDenoiser

  Library/Audio/Plug-Ins/VST/RTAS/iZRX5HumRemovalPTHook.dpm

  -com.izotope.audioplugins.PT.RX5HumRemoval

  Library/Audio/Plug-Ins/VST/RTAS/iZRX5MonitorPTHook.dpm

  -com.izotope.audioplugins.PT.RX5Monitor

  Insight.vst Library/Audio/Plug-Ins/VST/VST/iZotope

  -com.izotope.audioplugins.VST.Insight

  RX Library/Audio/Plug-Ins/VST/VST/iZotope 5 Connect.vst

  -com.izotope.audioplugins.VST.RX5Connect

  RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-click.vst

  -com.izotope.audioplugins.VST.RX5Declicker

  RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-clip.vst

  -com.izotope.audioplugins.VST.RX5Declipper

  RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-crackle.vst

  -com.izotope.audioplugins.VST.RX5Decrackler

  RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-UM .vst

  -com.izotope.audioplugins.VST.RX5HumRemoval

  RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-noise.vst

  -com.izotope.audioplugins.VST.RX5Denoiser

  RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-reverb.vst

  -com.izotope.audioplugins.VST.RX5Dereverb

  RX Library/Audio/Plug-Ins/VST/VST/iZotope 5 Dialogue-noise.vst

  -com.izotope.audioplugins.VST.RX5DlgDenoiser

  RX Library/Audio/Plug-Ins/VST/VST/iZotope 5 Monitor.vst

  -com.izotope.audioplugins.VST.RX5Monitor

  Insight.vst3 Library/Audio/Plug-Ins/VST/VST3/iZotope

  -com.izotope.audioplugins.VST.Insight

  RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5 Connect.vst3

  -com.izotope.audioplugins.VST.RX5Connect

  RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-click.vst3

  -com.izotope.audioplugins.VST.RX5Declicker

  RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-clip.vst3

  -com.izotope.audioplugins.VST.RX5Declipper

  RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-crackle.vst3

  -com.izotope.audioplugins.VST.RX5Decrackler

  RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-UM .vst3

  -com.izotope.audioplugins.VST.RX5HumRemoval

  RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-noise.vst3

  -com.izotope.audioplugins.VST.RX5Denoiser

  RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-reverb.vst3

  -com.izotope.audioplugins.VST.RX5Dereverb

  RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5 Dialogue-noise.vst3

  -com.izotope.audioplugins.VST.RX5DlgDenoiser

  RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5 Monitor.vst3

  -com.izotope.audioplugins.VST.RX5Monitor

  Library/Caches/com.apple.Safari/Extensions/AdBlock-2.safariextension

  -com.betafish.adblockforsafari

  Library/Caches/com.apple.Safari/Extensions/Auto Refresh.safariextension

  -com.agriffindesign.autorefresh

  Library/Caches/com.apple.Safari/Extensions/Hide & 2.safariextension - search

  -net.roopc.hideandseekformac

  Library/Caches/com.apple.Safari/Extensions/IncognIt VPN Switcher.safariextension

  -com.incogniteam.safari.switcher

  Library/Caches/com.apple.Safari/Extensions/YoutubeWide.safariextension

  -com.pedrocc.youtubewide

  Library/Services/ToastIt.service

  -com.roxio.ToastItService

  dylibs

  /usr/lib/libUFSDNTFS.dylib

  Content of/etc/hosts (UTF-8 Unicode English text)

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  FE80::1% lo0 localhost

  0.0.0.0 www.rogueamoeba.com

  127.0.0.1 www.rogueamoeba.com

  127.0.0.1 www.adobe.com

  127.0.0.1 hl2rcv.adobe.com

  127.0.0.1 t3dns.adobe.com

  127.0.0.1 3dns - 1.adobe.com

  127.0.0.1 3dns - 2.adobe.com

  127.0.0.1 3dns - 3.adobe.com

  127.0.0.1 3dns - 4.adobe.com

  127.0.0.1 activate.adobe.com

  127.0.0.1 activate - sea.adobe.com

  127.0.0.1 activate - sjc0.adobe.com

  127.0.0.1 activate.wip.adobe.com

  127.0.0.1 activate.wip1.adobe.com

  127.0.0.1 activate.wip2.adobe.com

  127.0.0.1 activate.wip3.adobe.com

  127.0.0.1 activate.wip4.adobe.com

  127.0.0.1 adobe - dns.adobe.com

  127.0.0.1 adobe-dns - 1.adobe.com

  127.0.0.1 adobe-dns - 2.adobe.com

  127.0.0.1 adobe-dns - 3.adobe.com

  .. .and 63 more line (s)

  Content of /etc/pf.conf

  scrub-anchor "com.apple / * '.

  NAT-anchor "com.apple / * '.

  RDR-anchor "com.apple / * '.

  dummynet-anchor "com.apple / * '.

  Anchor "com.apple / * '.

  load the "com.apple" anchor of "/ etc/pf.anchors/com.apple".

  Content of/etc/syslog.conf

  install.* @127.0.0.1:32376

  Content of /etc/pam.d/authorization

  Pam_krb5.so AUTH optional use_kcminit use_first_pass

  AUTH pam_ntlm.so optional use_first_pass

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so

  Content of /etc/pam.d/checkpw

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so no_check_home no_check_shell

  Content of /etc/pam.d/chkpasswd

  AUTH required pam_opendirectory.so

  account required pam_opendirectory.so

  password required pam_permit.so

  session required pam_permit.so

  Content of /etc/pam.d/cups

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Content of /etc/pam.d/ftpd

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Contents of /etc/pam.d/login

  Pam_krb5.so AUTH optional use_kcminit

  AUTH pam_ntlm.so optional try_first_pass

  AUTH pam_mount.so optional try_first_pass

  AUTH required pam_opendirectory.so try_first_pass

  account required pam_nologin.so

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  session required pam_uwtmp.so

  session pam_mount.so in option

  Content of /etc/pam.d/login.term

  account required pam_nologin.so

  account required pam_opendirectory.so

  session required pam_uwtmp.so

  Content of /etc/pam.d/other

  AUTH required pam_deny.so

  pam_deny.so account required

  password required pam_deny.so

  session required pam_deny.so

  Content of /etc/pam.d/passwd

  AUTH required pam_permit.so

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_permit.so

  Content of /etc/pam.d/rshd

  AUTH required pam_permit.so

  account required pam_nologin.so

  account required pam_opendirectory.so

  session required pam_launchd.so

  Content of /etc/pam.d/screensaver

  Pam_krb5.so AUTH optional use_kcminit use_first_pass

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so

  account sufficient pam_self.so

  Group accounts required pam_group.so no_warn = admin, wheel fail_safe

  account required pam_group.so no_warn deny group = admin, wheel ruser fail_safe

  Content of /etc/pam.d/smbd

  account of the sacl_service pam_sacl.so = allow_trustacct smb

  session required pam_permit.so

  Content of /etc/pam.d/sshd

  Pam_krb5.so AUTH optional use_kcminit

  AUTH pam_ntlm.so optional try_first_pass

  AUTH pam_mount.so optional try_first_pass

  AUTH required pam_opendirectory.so try_first_pass

  account required pam_nologin.so

  account of the sacl_service pam_sacl.so = ssh

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  session pam_mount.so in option

  Content of /etc/pam.d/su

  AUTH sufficient pam_rootok.so

  AUTH required pam_opendirectory.so

  Group accounts required pam_group.so no_warn = admin, wheel tweak root_only fail_safe

  no_check_shell account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  Content of /etc/pam.d/sudo

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Content of /etc/periodic/daily/110.clean-tmps

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_tmps_enable' in

  [AA] [Ee] [Ss])

  If [-z "$daily_clean_tmps_days"]

  then

  echo ' $daily_clean_tmps_enable is defined, but '.

  "$daily_clean_tmps_days is not.

  RC = 2

  on the other

  ECHO «»

  echo "deleting old temporary files:

  Set f noglob

  args = ""-atime $daily_clean_tmps_days - mtime + $daily_clean_tmps_days ""

  args = "${args} - ctime + $daily_clean_tmps_days.

  dargs = "- empty - mtime + $daily_clean_tmps_days"

  dargs = "${dargs}! "- name .vfs_rsrc_streams_."

  [n "$daily_clean_tmps_ignore"] & & {}

  args = "$args '" echo "${daily_clean_tmps_ignore %} ' |" ' "

  sed / [] [] * / ! -name/g "

  dargs = "$dargs '" echo "${daily_clean_tmps_ignore %} ' |" ' "

  sed / [] [] * / ! -name/g "

  .. .and 21 more line (s)

  Content of /etc/periodic/daily/130.clean-msgs

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_msgs_enable' in

  [AA] [Ee] [Ss])

  If [! d/var/msgs]

  then

  echo ' $daily_clean_msgs_enable has the value but msgs/var / ' \.

  "does not exist".

  RC = 2

  on the other

  ECHO «»

  echo "cleaning of the old ads system:

  [n '$daily_clean_msgs_days'] & &

  ARG =-${daily_clean_msgs_days #-} | ARG =

  GSM-c $arg & & rc = 0 | RC = 3

  FI;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/140.clean-rwho

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_rwho_enable' in

  [AA] [Ee] [Ss])

  If [-z "$daily_clean_rwho_days"]

  then

  echo ' $daily_clean_rwho_enable is activated but '.

  "$daily_clean_rwho_days is not defined.

  RC = 2

  Elif [! d/var/rwho(1)]

  then

  echo "$daily_clean_rwho_enable is enabled but/var/rwho(1)."------

  "does not exist".

  RC = 2

  on the other

  ECHO «»

  echo "deleting obsolete files in/var/rwho(1):

  case '$daily_clean_rwho_verbose' in

  [AA] [Ee] [Ss])

  print = -.

  *)

  print =;

  .. .and 14 more line (s)

  Content of /etc/periodic/daily/199.clean-fax

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  If [/ var/spool/fax - d]; then

  ECHO «»

  echo "deleting files fax scratch."

  CD/var/spool/fax & & \

  To find. -type f-name ' [0-9] *. [0-9] [0-9] [0-9] "- mtime + 7 - delete > / dev/null 2 > & 1;"

  FI

  Content of /etc/periodic/daily/310.accounting

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_accounting_enable' in

  [AA] [Ee] [Ss])

  If [!] ACCT - f]

  then

  echo '$daily_accounting_enable has the value but ACCT '.

  "does not exist".

  RC = 2

  Elif [-z "$daily_accounting_save"]

  then

  echo ' $daily_accounting_enable is defined, but '.

  "$daily_accounting_save is not.

  RC = 2

  on the other

  ECHO «»

  echo "accounting log rotation and collection of statistics:

  CD/var/account

  RC = 0

  n = $daily_accounting_save

  RM f ACCT. $ ACCT n.gz. $n || RC = 3

  m = $n

  .. .and 18 several line (s)

  Content of /etc/periodic/daily/400.status-disks

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_disks_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "record status:

  DF $daily_status_disks_df_flags & & rc = 1 | RC = 3

  ;;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/420.status-network

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_network_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "State of the network interface:

  case '$daily_status_network_usedns' in

  [AA] [Ee] [Ss])

  netstat-i & & rc = 0 | RC = 3;

  *)

  netstat - in & & rc = 0 | RC = 3;

  ESAC;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/430.status-rwho

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_rwho_enable' in

  [AA] [Ee] [Ss])

  RWHO(1) = $(echo/var/rwho / *)

  If [f ' ${rwho(1) % *} "]

  then

  ECHO «»

  echo "the system of Local network status:

  PROG = ruptime

  on the other

  ECHO «»

  echo "Local System State:

  PROG = running time

  FI

  RC = $($prog | tee/dev/stderr | wc-l)

  If [$?-eq 0]

  then

  [$rc - gt 1] & & rc = 1

  on the other

  RC = 3

  FI;

  .. .and 3 more lines

  Content of /etc/periodic/daily/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $daily_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Content of /etc/periodic/monthly/199.rotate-fax

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  ECHO «»

  printf %s "rotation of the fax log files:

  CD/var/log/fax

  I'm in * .log; do

  If [f ' ${i} "]; then

  echo-n "$i".

  If [x - / usr/bin/gzip]; then gzext = ".gz". else gzext =""; FI

  If [f ' ${i} $.3 {gzext} "]; then mv-f "${i} $.3 {gzext}" "${i}.4$ {gzext}"; FI

  If [f ' ${i} $.2 {gzext} "]; then mv-f "${i} $.2 {gzext}" "${i} $.3 {gzext}"; FI

  If [f ' ${i}.1$ {gzext} "]; then mv-f "${i}.1$ {gzext}" "${i} $.2 {gzext}"; FI

  If [f ' ${i}.0$ {gzext} "]; then mv-f "${i}.0$ {gzext}" "${i}.1$ {gzext}"; FI

  If [f ' ${i} "]; then mv-f "${i}" "${i}.0" & & if [x - / usr/bin/gzip]; then gzip-9 "${i}.0. FI; FI

  Touch "${i}" & & chmod 640 ' ${i} "& & chown root: admin" ${i} ".

  FI

  fact

  ECHO «»

  Content of /etc/periodic/monthly/200.accounting

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  oldmask = $(umask)

  umask 066

  case '$monthly_accounting_enable' in

  [AA] [Ee] [Ss])

  W = / var/log/wtmp

  RC = 0

  Remove = NO

  If [$rc - eq 0]

  then

  ECHO «»

  echo "doing the accounting of connection:

  RC = $(ac-p |) Sort - nr k 2 | Tee/dev/stderr. WC - l)

  [$rc - gt 0] & & rc = 1

  FI

  [$remove = YES] & & rm-f $W.0;

  *) rc = 0;

  ESAC

  umask $oldmask

  output $rc

  Content of /etc/periodic/monthly/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $monthly_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Content of /etc/periodic/weekly/320.whatis

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$weekly_whatis_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "reconstruction whatis database:

  MANPATH ='/ usr/bin/manpath - q'

  If [$? = 0]

  then

  If [-z "${MANPATH}"]

  then

  echo "manpath impossible to find directories manpage.

  RC = 3

  on the other

  RC = 0

  /usr/libexec/makewhatis.local "${MANPATH}" | RC = 3

  If [X "${man_locales}"! = X]

  then

  I'm in ${man_locales}

  do

  LC_ALL = $i /usr/libexec/makewhatis.local - a------.

  -L "${MANPATH}" | RC = 3

  .. .and 9 more line (s)

  Content of /etc/periodic/weekly/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $weekly_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Contents of the /Library/Preferences/com.apple.security.appsandbox.plist (text of XML document)

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  < key > UnrestrictSpotlightContainerScope < / key >

  < true / >

  < / dict >

  < / plist >

  Contents of the /Library/Preferences/SystemConfiguration/com.apple.Boot.plist (text of XML document)

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  Flags kernel < key > < / key >

  < string > < / string >

  < / dict >

  < / plist >

  Problems of fonts: 57

  Listeners

  launchd: afpovertcp

  launchd: afpovertcp

  launchd: microsoft-ds

  launchd: microsoft-ds

  KDC: kerberos

  Safari extensions

  AdBlock

  Auto Refresh

  Hide & Seek

  IncognIt VPN switch

  YoutubeWide

  Restricted file: 706

  Senior leaders

  Office: 255

  Time elapsed (s): 246

  Hi dedidude,

  Thank you for using communities Support from Apple. I know it's important to be able to use iTunes to access your media, so I'm happy to provide advice to connect to the iTunes Store again.

  To resolve this, see the steps that we have in our articles here:

  If you cannot connect to the iTunes Store

  Advanced steps for fixing problems with the iTunes Store connection

  Have a great rest of your day, cheers!

• Payment authorization failed

  Hello

  I'm a Subscriber CC Pro since 10 months ago and the month last Adobe could not charge my credit due to no more limit card and my subscription has been cancelled until I can solve the problem.

  Now that my credit card number has been resolved, I tried to launch a new plan but my payment always failed with the message: "failed authorization of payment. Tried a different credit card has occurred the same message. Try different browsers (and even computers) also did not help. Last thing, I tried creating a different Adobe ID, but still not helped.

  I chat with a customer service and it returns me to the dealers in my country (which is the Malaysia if it helps) so I called them and once again a dead end, as they said they can only help to buy Creative Cloud not individual team.

  It's almost a month now and I still not able to solve the problem.

  Can someone help me here as I really need to get my creative cloud works again.

  Thank you!

  I send the question to the relevant team, I expect the answer.

  Concerning

  Baudier

• Free RADIUS for the AAA authorization

  Hello

  Is there a Free\OpenSource RADIUS implementation that would work with permission of AAA Cisco and Accoutning features?

  I don't know if FreeRadius would be authorized to do?

  Thank you------Naman

  Try freeRADIUS (www.freeradius.org).

  It can manage all of the Cert-oriented Basic for EAP authentication.

  Good luck

  Scott