AAA authorization fails, but still command is executed...
Hello world
I've implemented the authorization and he basically works. The user can only use a limited set of commands (show int status, conf t interface ethernet, gigabitethernet interface, interface fastethernet, closed, non-stop).
Now, I'm trying to configure a loopback or interface Vlan, which should not be allowed.
COMMANDS IN ŒUVRE:
AAA authorization config-commands
AAA authorization commands vty 0 group Ganymede + none
AAA authorization commands 1 vty group Ganymede + none
AAA authorization commands 15 vty group Ganymede + none
line vty 0 15
authorization to control vty 0
vty orders 1 authorization
authorization orders 15 vty
COMMAND AND THE OUTPUT FROM THE TESTS:
SWITCH (config) #int vlan 2
Authorization of command failed.
DEBUG AAA APPROVAL:
SWITCH #.
7 Dec 14:31:50: AAA: analyze name = tty1 BID type =-1 ATS = - 1
7 Dec 14:31:50: AAA: name = tty1 flags = 0 x 11 type = 5 shelf = 0 = 0 = 0 = 1 0 = channel port adapter slot
7 Dec 14:31:50: AAA/MEMORY: user create_user (0x46603F4) = "USER1" ruser = 'SWITCH' ds0 = 0 port =
"tty1' rem_addr'10.10.255.249 = 'authen_type = ASCII service = NONE priv = 15 initial_task_id = ' 0', vrf = (id = 0)
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): Port = list "tty1" = "SCA" service = CMD
7 Dec 14:31:50: AAA/AUTHOR/CMD: tty1 user (60725991) = "USER1".
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send service AV = shell
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send cmd = interface AV
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send cmd - arg = AV Vlan
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send cmd - arg = 2 AV
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send cmd - arg = AV
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): found the list "SCA".
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): method = Ganymede + (Ganymede +)
7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): user = User1
7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): send service AV = shell
7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): send cmd = interface AV
7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): send cmd - arg = AV Vlan
7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): send cmd - arg = 2 AV
7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): send cmd - arg = AV
7 Dec 14:31:50: AAA/AUTHOR (60725991): permission post = FAIL
7 Dec 14:31:50: AAA/MEMORY: free_user (0x46603F4) user = "USER1" ruser = "SWITCH" port = "tty1" r
em_addr = '10.10.255.249' authen_type = ASCII service = NONE priv = 15
As you can see the answer of the Ganymede is a "FAILURE", but still the command is executed.
RESULT:
SWITCH #sh run int vlan 2
Building configuration...
Current configuration: 38 bytes
!
interface Vlan2
no ip address
end
QUESTION:
I don't understand what the problem... Since I get a Ganymede Server FAILURE I guess that the configuration of this side is fine.
But why the button ignore a FAILURE, always run the command? Same problem exists with the loopback Interface.
Is it just me not the basic concept of AAA understandig or is it another problem?
The switch is a Cisco WS-C3750-24TS (running c3750-ipbasek9 - mz.122 - 50.SE2.bin).
The Ganymede running Cisco Secure ACS4.2.0.124
Thank you
Tom
Hi Tom,
It's CSCtd49491 : GANYMEDE authorization failed-command for the configuration of the interface.
The bug is currently in a closed state, which means that the "bug report is valid, but a conscious decision accomplished not remedy all or all outputs."
As far as I know, the impact is rather limited, given that the interface that is created has no effect unless the vlan exists, and even in this case, the effect is minimal since it cannot be configured.
You can open a TAC case or work with your account team to get the bug if it is still a matter of concern but has reopened.
HTH
Herbert
Tags: Cisco Security
Similar Questions
-
AAA Authorization % failed.
Even my credentials accepted in the CSA authorization failure, anyone has any idea what it could be?
(Unauthorized use is not permitted)
username: tparrilha
password:
% Failed authorization.
Debug aaa journals
* 2 May 09:48:30.840: AAA/AUTHOR/EXEC (00000026): FAILED authorization
* 2 May 09:48:41.612: AAA/BIND (00000027): link i / f
* 09:48:41.612 2 may: AAA/AUTHENTIC/LOGIN (00000027): choose method list "by default".
* 09:48:45.440 2 may: AAA/AUTHOR (0x27): choose method list 'default' - FAIL
* 2 May 09:48:45.456: AAA/AUTHOR/EXEC (00000027): authorization FAILURE
AAA new-model
!
AAA server Ganymede group + Bainet
Server 172.20.244.10
!
AAA-authentication failure message ^ CCCC sorry the password is wrong ^ C
Group AAA authentication login default local Bainet
Group AAA authentication enable default Bainet allow none
AAA authorization config-commands
default AAA authorization exec Bainet local group
AAA authorization commands 1 default local group of Bainet
Group of controls 2 AAA authorization Bainet local default
Group of default controls 3 AAA authorization local Bainet
Group of 4 AAA authorization local Bainet orders default
Group of controls 5 AAA authorization Bainet local default
Group of 6 AAA authorization local Bainet orders default
Group of controls 7 AAA authorization Bainet local default
Group of orders 8 AAA authorization Bainet local default
Group of 9 AAA authorization local Bainet orders default
Group orders 10 AAA authorization Bainet local default
AAA authorization commands default 11 local group Bainet
AAA authorization commands 12 default local group of Bainet
AAA authorization commands 13 default local group of Bainet
AAA authorization commands by default 14 Bainet local group
AAA authorization commands by default 15 Bainet local group
AAA authorization Bainet configuration default group
AAA accounting send stop-record an authentication failure
failure to exec AAA accounting
action-type market / stop
Group of Bainet
!
default of 0 AAA accounting orders
action-type market / stop
Group of Bainet
!
by default the control 1 AAA accountant
action-type market / stop
Group of Bainet
!
by default the control 2 AAA accounting
action-type market / stop
Group of Bainet
!
by default the control of 3 Accountants of the AAA
action-type market / stop
Group of Bainet
!
by default the control of 4 Accountants of the AAA
action-type market / stop
Group of Bainet
!
by default of 5 Accountants of the AAA commands
action-type market / stop
Group of Bainet
!
by default of 6 AAA accounting orders
action-type market / stop
Group of Bainet
!
by default of 7 AAA accounting orders
action-type market / stop
Group of Bainet
!
by default of 8 AAA accounting orders
action-type market / stop
Group of Bainet
!
default commands 9 accounting AAA
action-type market / stop
Group of Bainet
!
failure to order 10 AAA accounting
action-type market / stop
Group of Bainet
!
by default of 11 AAA accounting orders
action-type market / stop
Group of Bainet
!
by default of orders 12 Accountants of the AAA
action-type market / stop
Group of Bainet
!
by default the control of 13 AAA accounting
action-type market / stop
Group of Bainet
!
by default of 14 AAA accounting orders
action-type market / stop
Group of Bainet
!
by default of 15 AAA accounting orders
action-type market / stop
Group of Bainet
!
by default, the AAA accounting network
action-type market / stop
Group of Bainet
!
default connection accounting AAA
action-type market / stop
Group of Bainet
!
default value of the AAA accounting system
action-type market / stop
Group of Bainet
Ganymede IP source interface FastEthernet0/0.1
RADIUS-server host 192.168.110.1 single-connection
RADIUS-server application made
RADIUS-server key 7 11485807161B4A0E0524282B6972
#show worm
RT-NAMIBE-NEBS version #show
Cisco IOS software, 2800 Software (C2800NM-ADVENTERPRISEK9_IVS_LI-M), Version 12.4 (24) T4, VERSION of the SOFTWARE (fc2)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Last update Fri 03-seven.-10 05:39 by prod_rel_team
ROM: System Bootstrap, Version 12.4 (13r) T, RELEASE SOFTWARE (fc1)
RT-NAMIBE-NBE uptime is of 12 weeks, 5 days, 23 hours, 56 minutes
System to regain the power ROM
System image file is "flash: c2800nm-adventerprisek9_ivs_li - mz.124 - 24.T4.bin".
After the debug message * 2 May 09:48:45.440: AAA/AUTHOR (0x27): choose method list 'default' - FAIL* the control will be passed to GANYMEDE. We are not this newspaper, who didn't understand why it failed in the Ganymede authorization. Looking at your configuration, its clear that you expect then question the user only if password enable priv-lvl = 15 is not currently configured on ACS for the user/group.
Could also remove you single-connection from the below listed command and try again.
RADIUS-server host 192.168.110.1 single-connection
In case it does not work, send the full output of debugs depending on if possible.
Debug aaa authentication
Debug aaa approval
Debug RADIUS authentication
Debug permission Ganymede
Debug events Ganymede
Jatin kone
-Does the rate of useful messages-
-
Hello
I test an aaa authentication switch when it does not communicate to ISE, and I found a strange behaviour. After that I added the aaa accounting and authorization authentication controls and reloaded the switch I was not able to connect to the switch with the GANYMEDE login
The switch continued in cycles showing the banner give 3 times authentication failure message and then the cycle begins with the failed, banner and sign message
I removed the aaa authorization network command and I reloaded the switch and I was able to connect successfully.
could someone help me with this problem.
Hi Nitesh-
This command (... aaa authorization network) has nothing to do with the admin authorization on the n basis (in this case, the switch). This command applies to the network connections such as PPP, SLIP, etc.
In addition, aaa authorization can be performed by Ray and not only GANYMEDE +. RADIUS is not too powerful and you can provide authorization command sets but you can always return roles and different levels of privilege.
Have you tested the above configuration syntax? I did and it works as expected!
Thank you for evaluating useful messages!
-
AAA authorization command console
Hello
I don't really understand the need of the command ""console permission aaa "."
In fact we often set up these lines, which I already ar Editions by default VTY, Console, etc... :
AAA authorization exec default group Ganymede + authenticated if
AAA authorization commands 15 default group Ganymede + authenticated if
Am I wrong? Or these lines only apply to the VTY linse?
Thank you in advance
In the IOS default Cisco does not permit on the console. When you configure aaa authorization, it is applied to vty but not to the console. Basically, it's to make it harder for lock you to in the router or switch. If you want permission to apply on the console then you must explicitly configure (and be very very careful that it is configured correctly, or you can wind up being locked out of the router - think especially how it will work when you can't get to the external aaa server that normally makes the authorization).
HTH
Rick
-
Hi all
Probably, I'll ask a stupid question but I am really confused about the purpose of the "x by default local aaa authorization commands" command. I understand that if this command is configured, it allows each order of this level, but in my experience, this command does nothing. The result is the same whether or not it is configured.
Here is my config part aaa
cisco cisco username privilege 15 secret
AAA new-model
AAA authentication login default local activate
AAA authorization exec default local authenticated by FIS
AAA authorization commands 15 local default authenticated by FIS
Now if I keep the last command or remove, user name "cisco" is able to use each command level 15 so my question is, why would I bother to configure this command?
Would really appreciate your quick response
Concerning
Hi Charlotte,.
According to my understanding of the database of the local user you don't need to have permission from aaa in the network device... If you use any Ganymede + / Radius authentication servers, then it will be more efficient, you can set an attributes to the user profile and through which you can play the config access level users at certain level...
When it is with a local database, to approval based on the level of privileage we set locally on the device and he never looks for aaa... reference local authorization is limited and more that it is limited to sets of levels of privileage on the specific profile...
You can go through the below document mentioned for your apprenticeship on aaa...
http://www.Cisco.com/c/en/us/TD/docs/iOS/12_2/Security/command/reference...
Concerning
Knockaert
-
All downloads are indicated as having failed but are still online.
Whenever I have download a file and go to Downloads it shows the file failed, but the Firefox icon displays a download progress bar and the file will end if left alone. The real problem I encounter is that I have no idea how fast that downloads a file and I can't estimate when it will be finished.
I'm tempted to reinstall Firefox and disabling all add-ons, but none of these worked.
Thanks in advance.
Thanks, I think that's the theme I was using. It was actually both, in the toolbar and in the downloads folder.
-
Authorization failed and "accessing itunes store" maintains a loop
Hello
I have problem, first I can not connect to itunes store, can I remove the permission on this computer. But when I try to authorize dungeons failed and message "canned"accessing itunes store"loop. And after only 10 minutes I put warn something as "blah blah blah network connection has been lost. I have good connection and have no problem with any internet connection. There for 2 months I have a problem, I tried all of the solutions I found, but still I can't connect to itunes store.
I did the test proposed by Linc Davis, and the result is:
Check-out time: 12:54:10 06/22/16
Model identifier: MacPro5, 1
The system version: OS X 10.11.5 (15F34)
Kernel version: Darwin 15.5.0
Integrity of system protection: enabled
Since the start time: 02:05
SATA
WDC WD4003FZEX-00Z4SA0
Crucial_CT256MX100SSD1
WDC WD20EARS-19MVWB0
WDC WD40EZRX-00SPEB0
USB
Mouse USB LaserStream (TM) (Avago Technologies, Pte.)
Ultra (SanDisk Corporation)
boot args: nvda_drv = 1
Journal
June 22 at 11:55:24 Preview [1566] taken causing excessive Awakenings of the process. EXC_RESOURCE lost audio playback
Activity
NET: 892 in 46 (KiB/s)
The current downstream data: BitTorrent (UID 501) uses 652.857 KiB/s
The current data upstream: BitTorrent (UID 501) uses 25.9157 KiB/s
Memory: Adobe Photoshop (UID 501) use 5051 MB
kexts
com.nvidia.web.NVDAResmanWeb (10.1.1) UUID
com.nvidia.web.NVDAGK100HalWeb (10.1.1) UUID
com.nvidia.web.GeForceWeb (10.1.1) UUID
tc.tctechnologies.driver.Saffire (4.1.4 18735) UUID
com Apowersoft.driver.AudioDevice (1.6.7) UUID
com.focusrite.driver.FocusritePCIe (4.4.0 175) UUID
com.nvidia.CUDA (1.1.0) UUID
com Disc - soft.DAEMONTools.VirtualSCSIBus (1.0.2) UUID
Demons
com.macpaw.CleanMyMac3.Agent
com BlueStacks.AppPlayer.bstservice_helper
com Charlessoft.Pacifist.Helper
org.tcpdump.chmod_bpf
com.adobe.ARMDC.Communicator
com.transcend.RxRecoveryHelper
com NVIDIA. CUDA. Launcher
com.focusrite.ControlServer
com Elgato.eyeconnectd
com Microsoft.Office.Licensing.Helper
com RogueAmoeba.InstantOn - agent
com.google.Keystone.daemon
Adobe_Genuine_Software_Integrity_Service
com.adobe.SwitchBoard
Acronis.Update
com Disc - soft.DAEMONTools.PrivilegedHelper
com NVIDIA.nvroothelper
com.adobe.ARMDC.SMJobBlessHelper
com.Bombich.ccchelper
tc.tctechnologies.daemon.Saffire
Agents
com.google.Keystone.System.agent
com Disc - soft.DAEMONTools.DAEMONToolsAgent
com BlueStacks.AppPlayer.Service
com.bittorrent.BitTorrent
com.adobe.ARMDCHelper.UUID
com.adobe.CS5ServiceManager
com.macpaw.CleanMyMac3.Scheduler
com BlueStacks.AppPlayer.UninstallWatcher
com NVIDIA.nvagent
com Spotify.webhelper
com.tidal.LaunchHelper
com.nvidia.CUDASoftwareUpdate
com Acronis.Monitor
com BlueStacks.AppPlayer.Updater
launchd
/ System/Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist
-com.apple.installer.osmessagetracing
/Library/LaunchAgents/com.Adobe.AAM.Updater-1.0.plist
-com.adobe.AAM.Startup - 1.0
/Library/LaunchAgents/com.Adobe.ARMDCHelper.UUID.plist
-com.adobe.ARMDCHelper.UUID
/Library/LaunchAgents/com.Adobe.CS5ServiceManager.plist
-com.adobe.CS5ServiceManager
/Library/LaunchAgents/com.Google.keystone.agent.plist
-com.google.keystone.system.agent
/ Library/LaunchAgents/com. NVIDIA. CUDASoftwareUpdate.plist
-com.nvidia.CUDASoftwareUpdate
/ Library/LaunchAgents/com. NVIDIA.nvagent.plist
-com.nvidia.nvagent
/ Library/LaunchDaemons/com. Acronis.Update.plist
-acronis.update
/Library/LaunchDaemons/com.Adobe.agsservice.plist
-Adobe_Genuine_Software_Integrity_Service
/Library/LaunchDaemons/com.Adobe.ARMDC.Communicator.plist
-com.adobe.ARMDC.Communicator
/Library/LaunchDaemons/com.Adobe.ARMDC.SMJobBlessHelper.plist
-com.adobe.ARMDC.SMJobBlessHelper
/Library/LaunchDaemons/com.Adobe.switchboard.plist
-com.adobe.SwitchBoard
/ Library/LaunchDaemons/com. BlueStacks.AppPlayer.bstservice_helper.plist
-com BlueStacks.AppPlayer.bstservice_helper
/Library/LaunchDaemons/com.Bombich.ccchelper.plist
-com.bombich.ccchelper
/ Library/LaunchDaemons/com. Charlessoft.Pacifist.Helper.plist
-com.charlessoft.pacifist.helper
/ Library/LaunchDaemons/com. Disc - Soft.DAEMONTools.PrivilegedHelper.plist
-com.disc - soft.DAEMONTools.PrivilegedHelper
/ Library/LaunchDaemons/com. Elgato.EyeConnect.plist
-com.elgato.eyeconnectd
/ Library/LaunchDaemons/com. Focusrite.ControlServer.plist
-com.focusrite.ControlServer
/Library/LaunchDaemons/com.Google.keystone.daemon.plist
-com.google.keystone.daemon
/Library/LaunchDaemons/com.macpaw.CleanMyMac3.agent.plist
-com.macpaw.CleanMyMac3.Agent
/ Library/LaunchDaemons/com. Microsoft.Office.Licensing.Helper.plist
-com.microsoft.office.licensing.helper
/ Library/LaunchDaemons/com. NVIDIA. CUDA. Launcher.plist
-com.nvidia.cuda.launcher
/ Library/LaunchDaemons/com. NVIDIA.nvroothelper.plist
-com.nvidia.nvroothelper
/ Library/LaunchDaemons/com. RogueAmoeba.InstantOn - agent.plist
-com.rogueamoeba.instanton - agent
/ Library/LaunchDaemons/com. Transcend.RxRecoveryHelper.plist
-com.transcend.RxRecoveryHelper
/Library/LaunchDaemons/org.tcpdump.chmod_bpf.plist
-org.tcpdump.chmod_bpf
/Library/LaunchDaemons/TC.tctechnologies.Saffire.plist
-tc.tctechnologies.daemon.Saffire
Library/LaunchAgents/com.acronis.monitor.plist
-com.acronis.monitor
Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
-com.adobe.AAM.Scheduler - 1.0
Library/LaunchAgents/com.bittorrent.BitTorrent.plist
-com.bittorrent.BitTorrent
Com/library/LaunchAgents. BlueStacks.AppPlayer.Service.plist
-com BlueStacks.AppPlayer.Service
Com/library/LaunchAgents. BlueStacks.AppPlayer.UninstallWatcher.plist
-com BlueStacks.AppPlayer.UninstallWatcher
Com/library/LaunchAgents. BlueStacks.AppPlayer.Updater.plist
-com BlueStacks.AppPlayer.Updater
Library/LaunchAgents/com.disc-soft.DAEMONTools.DAEMONToolsAgent.plist
-com.disc - soft.DAEMONTools.DAEMONToolsAgent
Library/LaunchAgents/com.macpaw.CleanMyMac3.Scheduler.plist
-com.macpaw.CleanMyMac3.Scheduler
Library/LaunchAgents/com.spotify.webhelper.plist
-com.spotify.webhelper
Startup items
/ Library/StartupItems/ProTec6b/DemoOver
/ Library/StartupItems/ProTec6b/Nalpeirond6b
/ Library/StartupItems/ProTec6b/ProTec6b
/Library/StartupItems/ProTec6b/StartupParameters.plist
Beams
/System/Library/Extensions/AuthenticationSupport.plugin
-com SecuritySolutions.AuthenticationSupport
/System/Library/Extensions/AuthenticationSupportEnabler.plugin
-com SecuritySolutions.AuthenticationSupportEnabler
/System/Library/Extensions/CUDA.kext
-com.nvidia.CUDA
/System/Library/Extensions/FocusriteUSBAudio.kext
-com.focusrite.driver.usb.audio
/System/Library/Extensions/GeForceAIRPluginWeb.bundle
-com.nvidia.web.GeForceAIRPluginWeb
/System/Library/Extensions/GeForceGLDriverWeb.bundle
-com.nvidia.web.GeForceGLDriverWeb
/System/Library/Extensions/GeForceMTLDriverWeb.bundle
-com.nvidia.web.GeForceMTLDriverWeb
/System/Library/Extensions/GeForceTeslaGAWeb.plugin
-com.nvidia.web.GeForceTeslaGAWeb
/System/Library/Extensions/GeForceTeslaGLDriverWeb.bundle
-com.nvidia.web.GeForceTeslaGLDriverWeb
/System/Library/Extensions/GeForceTeslaVADriverWeb.bundle
-com.nvidia.web.GeForceTeslaVADriverWeb
/System/Library/Extensions/GeForceTeslaWeb.kext
-com.nvidia.web.GeForceTeslaWeb
/System/Library/Extensions/GeForceVADriverWeb.bundle
-com.nvidia.web.GeForceVADriverWeb
/System/Library/Extensions/GeForceWeb.kext
-com.nvidia.web.GeForceWeb
/System/Library/Extensions/JMicronATA.kext
-com.jmicron.JMicronATA
/System/Library/Extensions/NovationUSBAudio.kext
-com.novationmusic.driver.usb.audio
/System/Library/Extensions/NVDAGF100HalWeb.kext
-com.nvidia.web.NVDAGF100HalWeb
/System/Library/Extensions/NVDAGK100HalWeb.kext
-com.nvidia.web.NVDAGK100HalWeb
/System/Library/Extensions/NVDAGM100HalWeb.kext
-com.nvidia.web.NVDAGM100HalWeb
/System/Library/Extensions/NVDANV50HalTeslaWeb.kext
-com.nvidia.web.NVDANV50HalTeslaWeb
/System/Library/Extensions/NVDAResmanTeslaWeb.kext
-com.nvidia.web.NVDAResmanTeslaWeb
/System/Library/Extensions/NVDAResmanWeb.kext
-com.nvidia.web.NVDAResmanWeb
/System/Library/Extensions/NVDAStartupWeb.kext
-com.nvidia.NVDAStartupWeb
/System/Library/Extensions/Saffire.kext
-tc.tctechnologies.driver.Saffire
/System/Library/Extensions/Soundflower.kext
-com Cycling74.Driver.Soundflower
/ Library/Apowersoft Mac Audio Recorder/uninstall Apowersoft Audio Recorder.app
Apowersoft.Uninstall - Apowersoft-Audio-recorder
/ Library/Audio/MIDI drivers/FocusritePCIeMIDIDriver.plugin
-com.focusrite.FocusritePCIe.midiplugin
/ Library/Audio/MIDI drivers/NIUSBMIDIDriver.plugin
S/O
/ Library/Audio/MIDI drivers/NovationUSBMIDIDriver.plugin
-com.novationmusic.driver.usb.midi
/ Library/Audio/MIDI drivers/SaffireMIDIDriver.plugin
-tc.tctechnologies.Saffire.midiplugin
/ Component library/Audio/Plug-Ins/components/Guitar Rig 5.
S/O
/Library/audio/plug-ins/components/iZInsightAUHook.component
-com.izotope.audioplugins.AU.Insight
/Library/audio/plug-ins/components/iZMeterTapAUHook.component
S/O
/Library/audio/plug-ins/components/iZOzone6AUHook.component
-com.izotope.audioplugins.AU.Ozone6
/Library/audio/plug-ins/components/iZOzone6DynamicsAUHook.component
-com.izotope.audioplugins.AU.Ozone6DYN
/Library/audio/plug-ins/components/iZOzone6DynEqAUHook.component
-com.izotope.audioplugins.AU.Ozone6DYNEQ
/Library/audio/plug-ins/components/iZOzone6EqualizerAUHook.component
-com.izotope.audioplugins.AU.Ozone6EQ
/Library/audio/plug-ins/components/iZOzone6ExciterAUHook.component
-com.izotope.audioplugins.AU.Ozone6EXC
/Library/audio/plug-ins/components/iZOzone6ImagerAUHook.component
-com.izotope.audioplugins.AU.Ozone6IMG
/Library/audio/plug-ins/components/iZOzone6MaximizerAUHook.component
-com.izotope.audioplugins.AU.Ozone6MAX
/Library/audio/plug-ins/components/iZRX5ConnectAUHook.component
-com.izotope.audioplugins.AU.RX5Connect
/Library/audio/plug-ins/components/iZRX5DeclickerAUHook.component
-com.izotope.audioplugins.AU.RX5Declicker
/Library/audio/plug-ins/components/iZRX5DeclipperAUHook.component
-com.izotope.audioplugins.AU.RX5Declipper
/Library/audio/plug-ins/components/iZRX5DecracklerAUHook.component
-com.izotope.audioplugins.AU.RX5Decrackler
/Library/audio/plug-ins/components/iZRX5DenoiserAUHook.component
-com.izotope.audioplugins.AU.RX5Denoiser
/Library/audio/plug-ins/components/iZRX5DereverbAUHook.component
-com.izotope.audioplugins.AU.RX5Dereverb
/Library/audio/plug-ins/components/iZRX5DialogueDenoiserAUHook.component
-com.izotope.audioplugins.AU.RX5DlgDenoiser
/Library/audio/plug-ins/components/iZRX5HumRemovalAUHook.component
-com.izotope.audioplugins.AU.RX5HumRemoval
/Library/audio/plug-ins/components/iZRX5MonitorAUHook.component
-com.izotope.audioplugins.AU.RX5Monitor
/Library/audio/plug-ins/HAL/FocusritePCIeAudio.driver
-com.focusrite.FocusritePCIeAudio
/Library/audio/plug-ins/HAL/InstantOn.driver
-com.rogueamoeba.InstantOn.driver
/ Library/Audio/Plug-Ins/VST/Guitar Rig 5. VST
S/O
/ Library/Audio/Plug-Ins/VST/iZotope Insight.vst
-com.izotope.audioplugins.VST.Insight
/ Library/Audio/Plug-Ins/VST/iZotope meter Tap.vst
S/O
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 dynamic EQ.vst
-com.izotope.audioplugins.VST.Ozone6DYNEQ
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Dynamics.vst
-com.izotope.audioplugins.VST.Ozone6DYN
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Equalizer.vst
-com.izotope.audioplugins.VST.Ozone6EQ
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Exciter.vst
-com.izotope.audioplugins.VST.Ozone6EXC
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Imager.vst
-com.izotope.audioplugins.VST.Ozone6IMG
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Maximizer.vst
-com.izotope.audioplugins.VST.Ozone6MAX
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6. VST
-com.izotope.audioplugins.VST.Ozone6
/ Library/Audio/Plug-Ins/VST/iZotope RX 5 Connect.vst
-com.izotope.audioplugins.VST.RX5Connect
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-click.vst
-com.izotope.audioplugins.VST.RX5Declicker
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-clip.vst
-com.izotope.audioplugins.VST.RX5Declipper
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-crackle.vst
-com.izotope.audioplugins.VST.RX5Decrackler
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-UM .vst
-com.izotope.audioplugins.VST.RX5HumRemoval
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-noise.vst
-com.izotope.audioplugins.VST.RX5Denoiser
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-reverb.vst
-com.izotope.audioplugins.VST.RX5Dereverb
/ Library/Audio/Plug-Ins/VST/iZotope RX 5 Dialogue-noise.vst
-com.izotope.audioplugins.VST.RX5DlgDenoiser
/ Library/Audio/Plug-Ins/VST/iZotope RX 5 Monitor.vst
-com.izotope.audioplugins.VST.RX5Monitor
/ Library/Audio/Plug-Ins/VST3/iZotope Insight.vst3
-com.izotope.audioplugins.VST.Insight
/ Library/Audio/Plug-Ins/VST3/iZotope meter Tap.vst3
S/O
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 dynamic EQ.vst3
-com.izotope.audioplugins.VST.Ozone6DYNEQ
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Dynamics.vst3
-com.izotope.audioplugins.VST.Ozone6DYN
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Equalizer.vst3
-com.izotope.audioplugins.VST.Ozone6EQ
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Exciter.vst3
-com.izotope.audioplugins.VST.Ozone6EXC
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Imager.vst3
-com.izotope.audioplugins.VST.Ozone6IMG
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Maximizer.vst3
-com.izotope.audioplugins.VST.Ozone6MAX
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6.vst3
-com.izotope.audioplugins.VST.Ozone6
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5 Connect.vst3
-com.izotope.audioplugins.VST.RX5Connect
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-click.vst3
-com.izotope.audioplugins.VST.RX5Declicker
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-clip.vst3
-com.izotope.audioplugins.VST.RX5Declipper
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-crackle.vst3
-com.izotope.audioplugins.VST.RX5Decrackler
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-UM .vst3
-com.izotope.audioplugins.VST.RX5HumRemoval
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-noise.vst3
-com.izotope.audioplugins.VST.RX5Denoiser
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-reverb.vst3
-com.izotope.audioplugins.VST.RX5Dereverb
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5 Dialogue-noise.vst3
-com.izotope.audioplugins.VST.RX5DlgDenoiser
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5 Monitor.vst3
-com.izotope.audioplugins.VST.RX5Monitor
/Library/components/FLACAudioCodec.component
-com.mycompany.myformat
/Library/components/FLACAudioFileComponent.component
-com.Acme.audio.files.Components
/Library/Extensions/Apowersoft_AudioDevice.kext
-com Apowersoft.driver.AudioDevice
/Library/Extensions/FocusritePCIe.kext
-com.focusrite.driver.FocusritePCIe
/Library/Extensions/NIUSBAudioDriver.kext
-com.caiaq.driver.NIUSBHardwareDriver
/Library/Extensions/NIUSBGuitarRigMobile.kext
-com.caiaq.driver.NIUSBGuitarRigMobileDriver
/ / Library/Internet Plug-Ins/AdobeAAMDetect.plugin
-com AdobeAAMDetectLib.AdobeAAMDetect
/ / Library/Internet Plug-Ins/AdobePDFViewer.plugin
-com.adobe.acrobat.pdfviewer
/ / Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
-com.adobe.acrobat.pdfviewerNPAPI
/ / Library/Internet Plug-Ins/JavaAppletPlugin.plugin
-com.apple.java.JavaAppletPlugin
/ / Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
-com.microsoft.sharepoint.browserplugin
/ / Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
-com.microsoft.sharepoint.webkitplugin
/ / Library/Internet Plug-Ins/Silverlight.plugin
-com.microsoft.SilverlightPlugin
/ Library/PreferencePanes/CUDA Preferences.prefPane
-com.nvidia.CUDAPref
/Library/PreferencePanes/EyeConnect.prefPane
-com.elgato.preference.EyeConnect
/Library/PreferencePanes/MacFUSE.prefPane
-com.google.MacFUSE
/Library/PreferencePanes/NIUSBAudio.prefPane
-com.caiaq.NIUSBAudioPreferencePane
/Library/PreferencePanes/NTFS-3G.prefPane
-org.catacombae.macntfs - 3 g .prefpane
/Library/PreferencePanes/NTFSforMacOSX.prefPane
-com.paragon - software.filesystems.ntfs.prefpanel
/ Library/PreferencePanes/NVIDIA Driver Manager.prefPane
-com.nvidia.nvprefpane
/Library/PreferencePanes/OSXFUSE.prefPane
-com.github.osxfuse.OSXFUSEPrefPane
/ Library/ScriptingAdditions/Adobe unit Types.osax
S/O
Library/Audio/Plug-Ins/VST/AU/iZInsightAUHook.component
-com.izotope.audioplugins.AU.Insight
Library/Audio/Plug-Ins/VST/AU/iZRX5ConnectAUHook.component
-com.izotope.audioplugins.AU.RX5Connect
Library/Audio/Plug-Ins/VST/AU/iZRX5DeclickerAUHook.component
-com.izotope.audioplugins.AU.RX5Declicker
Library/Audio/Plug-Ins/VST/AU/iZRX5DeclipperAUHook.component
-com.izotope.audioplugins.AU.RX5Declipper
Library/Audio/Plug-Ins/VST/AU/iZRX5DecracklerAUHook.component
-com.izotope.audioplugins.AU.RX5Decrackler
Library/Audio/Plug-Ins/VST/AU/iZRX5DenoiserAUHook.component
-com.izotope.audioplugins.AU.RX5Denoiser
Library/Audio/Plug-Ins/VST/AU/iZRX5DereverbAUHook.component
-com.izotope.audioplugins.AU.RX5Dereverb
Library/Audio/Plug-Ins/VST/AU/iZRX5DialogueDenoiserAUHook.component
-com.izotope.audioplugins.AU.RX5DlgDenoiser
Library/Audio/Plug-Ins/VST/AU/iZRX5HumRemovalAUHook.component
-com.izotope.audioplugins.AU.RX5HumRemoval
Library/Audio/Plug-Ins/VST/AU/iZRX5MonitorAUHook.component
-com.izotope.audioplugins.AU.RX5Monitor
Library/Audio/Plug-Ins/VST/iZotope RX 5 Audio Editor.app
-com.izotope.audioapps.rx5
Library/Audio/Plug-Ins/VST/RTAS/iZInsightPTHook.dpm
-com.izotope.audioplugins.PT.Insight
Library/Audio/Plug-Ins/VST/RTAS/iZRX5AmbienceMatchPTHook.dpm
-com.izotope.audioplugins.PT.RX5AmbienceMatch
Library/Audio/Plug-Ins/VST/RTAS/iZRX5ConnectPTHook.dpm
-com.izotope.audioplugins.PT.RX5Connect
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DeclickerPTHook.dpm
-com.izotope.audioplugins.PT.RX5Declicker
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DeclipperPTHook.dpm
-com.izotope.audioplugins.PT.RX5Declipper
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DecracklerPTHook.dpm
-com.izotope.audioplugins.PT.RX5Decrackler
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DenoiserPTHook.dpm
-com.izotope.audioplugins.PT.RX5Denoiser
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DereverbPTHook.dpm
-com.izotope.audioplugins.PT.RX5Dereverb
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DialogueDenoiserPTHook.dpm
-com.izotope.audioplugins.PT.RX5DlgDenoiser
Library/Audio/Plug-Ins/VST/RTAS/iZRX5HumRemovalPTHook.dpm
-com.izotope.audioplugins.PT.RX5HumRemoval
Library/Audio/Plug-Ins/VST/RTAS/iZRX5MonitorPTHook.dpm
-com.izotope.audioplugins.PT.RX5Monitor
Insight.vst Library/Audio/Plug-Ins/VST/VST/iZotope
-com.izotope.audioplugins.VST.Insight
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5 Connect.vst
-com.izotope.audioplugins.VST.RX5Connect
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-click.vst
-com.izotope.audioplugins.VST.RX5Declicker
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-clip.vst
-com.izotope.audioplugins.VST.RX5Declipper
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-crackle.vst
-com.izotope.audioplugins.VST.RX5Decrackler
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-UM .vst
-com.izotope.audioplugins.VST.RX5HumRemoval
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-noise.vst
-com.izotope.audioplugins.VST.RX5Denoiser
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-reverb.vst
-com.izotope.audioplugins.VST.RX5Dereverb
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5 Dialogue-noise.vst
-com.izotope.audioplugins.VST.RX5DlgDenoiser
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5 Monitor.vst
-com.izotope.audioplugins.VST.RX5Monitor
Insight.vst3 Library/Audio/Plug-Ins/VST/VST3/iZotope
-com.izotope.audioplugins.VST.Insight
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5 Connect.vst3
-com.izotope.audioplugins.VST.RX5Connect
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-click.vst3
-com.izotope.audioplugins.VST.RX5Declicker
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-clip.vst3
-com.izotope.audioplugins.VST.RX5Declipper
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-crackle.vst3
-com.izotope.audioplugins.VST.RX5Decrackler
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-UM .vst3
-com.izotope.audioplugins.VST.RX5HumRemoval
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-noise.vst3
-com.izotope.audioplugins.VST.RX5Denoiser
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-reverb.vst3
-com.izotope.audioplugins.VST.RX5Dereverb
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5 Dialogue-noise.vst3
-com.izotope.audioplugins.VST.RX5DlgDenoiser
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5 Monitor.vst3
-com.izotope.audioplugins.VST.RX5Monitor
Library/Caches/com.apple.Safari/Extensions/AdBlock-2.safariextension
-com.betafish.adblockforsafari
Library/Caches/com.apple.Safari/Extensions/Auto Refresh.safariextension
-com.agriffindesign.autorefresh
Library/Caches/com.apple.Safari/Extensions/Hide & 2.safariextension - search
-net.roopc.hideandseekformac
Library/Caches/com.apple.Safari/Extensions/IncognIt VPN Switcher.safariextension
-com.incogniteam.safari.switcher
Library/Caches/com.apple.Safari/Extensions/YoutubeWide.safariextension
-com.pedrocc.youtubewide
Library/Services/ToastIt.service
-com.roxio.ToastItService
dylibs
/usr/lib/libUFSDNTFS.dylib
Content of/etc/hosts (UTF-8 Unicode English text)
127.0.0.1 localhost
255.255.255.255 broadcasthost
: 1 localhost
FE80::1% lo0 localhost
0.0.0.0 www.rogueamoeba.com
127.0.0.1 www.rogueamoeba.com
127.0.0.1 www.adobe.com
127.0.0.1 hl2rcv.adobe.com
127.0.0.1 t3dns.adobe.com
127.0.0.1 3dns - 1.adobe.com
127.0.0.1 3dns - 2.adobe.com
127.0.0.1 3dns - 3.adobe.com
127.0.0.1 3dns - 4.adobe.com
127.0.0.1 activate.adobe.com
127.0.0.1 activate - sea.adobe.com
127.0.0.1 activate - sjc0.adobe.com
127.0.0.1 activate.wip.adobe.com
127.0.0.1 activate.wip1.adobe.com
127.0.0.1 activate.wip2.adobe.com
127.0.0.1 activate.wip3.adobe.com
127.0.0.1 activate.wip4.adobe.com
127.0.0.1 adobe - dns.adobe.com
127.0.0.1 adobe-dns - 1.adobe.com
127.0.0.1 adobe-dns - 2.adobe.com
127.0.0.1 adobe-dns - 3.adobe.com
.. .and 63 more line (s)
Content of /etc/pf.conf
scrub-anchor "com.apple / * '.
NAT-anchor "com.apple / * '.
RDR-anchor "com.apple / * '.
dummynet-anchor "com.apple / * '.
Anchor "com.apple / * '.
load the "com.apple" anchor of "/ etc/pf.anchors/com.apple".
Content of/etc/syslog.conf
install.* @127.0.0.1:32376
Content of /etc/pam.d/authorization
Pam_krb5.so AUTH optional use_kcminit use_first_pass
AUTH pam_ntlm.so optional use_first_pass
AUTH required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so
Content of /etc/pam.d/checkpw
AUTH required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so no_check_home no_check_shell
Content of /etc/pam.d/chkpasswd
AUTH required pam_opendirectory.so
account required pam_opendirectory.so
password required pam_permit.so
session required pam_permit.so
Content of /etc/pam.d/cups
AUTH required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Content of /etc/pam.d/ftpd
AUTH required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Contents of /etc/pam.d/login
Pam_krb5.so AUTH optional use_kcminit
AUTH pam_ntlm.so optional try_first_pass
AUTH pam_mount.so optional try_first_pass
AUTH required pam_opendirectory.so try_first_pass
account required pam_nologin.so
account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_launchd.so
session required pam_uwtmp.so
session pam_mount.so in option
Content of /etc/pam.d/login.term
account required pam_nologin.so
account required pam_opendirectory.so
session required pam_uwtmp.so
Content of /etc/pam.d/other
AUTH required pam_deny.so
pam_deny.so account required
password required pam_deny.so
session required pam_deny.so
Content of /etc/pam.d/passwd
AUTH required pam_permit.so
account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_permit.so
Content of /etc/pam.d/rshd
AUTH required pam_permit.so
account required pam_nologin.so
account required pam_opendirectory.so
session required pam_launchd.so
Content of /etc/pam.d/screensaver
Pam_krb5.so AUTH optional use_kcminit use_first_pass
AUTH required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so
account sufficient pam_self.so
Group accounts required pam_group.so no_warn = admin, wheel fail_safe
account required pam_group.so no_warn deny group = admin, wheel ruser fail_safe
Content of /etc/pam.d/smbd
account of the sacl_service pam_sacl.so = allow_trustacct smb
session required pam_permit.so
Content of /etc/pam.d/sshd
Pam_krb5.so AUTH optional use_kcminit
AUTH pam_ntlm.so optional try_first_pass
AUTH pam_mount.so optional try_first_pass
AUTH required pam_opendirectory.so try_first_pass
account required pam_nologin.so
account of the sacl_service pam_sacl.so = ssh
account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_launchd.so
session pam_mount.so in option
Content of /etc/pam.d/su
AUTH sufficient pam_rootok.so
AUTH required pam_opendirectory.so
Group accounts required pam_group.so no_warn = admin, wheel tweak root_only fail_safe
no_check_shell account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_launchd.so
Content of /etc/pam.d/sudo
AUTH required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Content of /etc/periodic/daily/110.clean-tmps
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_clean_tmps_enable' in
[AA] [Ee] [Ss])
If [-z "$daily_clean_tmps_days"]
then
echo ' $daily_clean_tmps_enable is defined, but '.
"$daily_clean_tmps_days is not.
RC = 2
on the other
ECHO «»
echo "deleting old temporary files:
Set f noglob
args = ""-atime $daily_clean_tmps_days - mtime + $daily_clean_tmps_days ""
args = "${args} - ctime + $daily_clean_tmps_days.
dargs = "- empty - mtime + $daily_clean_tmps_days"
dargs = "${dargs}! "- name .vfs_rsrc_streams_."
[n "$daily_clean_tmps_ignore"] & & {}
args = "$args '" echo "${daily_clean_tmps_ignore %} ' |" ' "
sed / [] [] * / ! -name/g "
dargs = "$dargs '" echo "${daily_clean_tmps_ignore %} ' |" ' "
sed / [] [] * / ! -name/g "
.. .and 21 more line (s)
Content of /etc/periodic/daily/130.clean-msgs
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_clean_msgs_enable' in
[AA] [Ee] [Ss])
If [! d/var/msgs]
then
echo ' $daily_clean_msgs_enable has the value but msgs/var / ' \.
"does not exist".
RC = 2
on the other
ECHO «»
echo "cleaning of the old ads system:
[n '$daily_clean_msgs_days'] & &
ARG =-${daily_clean_msgs_days #-} | ARG =
GSM-c $arg & & rc = 0 | RC = 3
FI;
*) rc = 0;
ESAC
output $rc
Content of /etc/periodic/daily/140.clean-rwho
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_clean_rwho_enable' in
[AA] [Ee] [Ss])
If [-z "$daily_clean_rwho_days"]
then
echo ' $daily_clean_rwho_enable is activated but '.
"$daily_clean_rwho_days is not defined.
RC = 2
Elif [! d/var/rwho(1)]
then
echo "$daily_clean_rwho_enable is enabled but/var/rwho(1)."------
"does not exist".
RC = 2
on the other
ECHO «»
echo "deleting obsolete files in/var/rwho(1):
case '$daily_clean_rwho_verbose' in
[AA] [Ee] [Ss])
print = -.
*)
print =;
.. .and 14 more line (s)
Content of /etc/periodic/daily/199.clean-fax
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
If [/ var/spool/fax - d]; then
ECHO «»
echo "deleting files fax scratch."
CD/var/spool/fax & & \
To find. -type f-name ' [0-9] *. [0-9] [0-9] [0-9] "- mtime + 7 - delete > / dev/null 2 > & 1;"
FI
Content of /etc/periodic/daily/310.accounting
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_accounting_enable' in
[AA] [Ee] [Ss])
If [!] ACCT - f]
then
echo '$daily_accounting_enable has the value but ACCT '.
"does not exist".
RC = 2
Elif [-z "$daily_accounting_save"]
then
echo ' $daily_accounting_enable is defined, but '.
"$daily_accounting_save is not.
RC = 2
on the other
ECHO «»
echo "accounting log rotation and collection of statistics:
CD/var/account
RC = 0
n = $daily_accounting_save
RM f ACCT. $ ACCT n.gz. $n || RC = 3
m = $n
.. .and 18 several line (s)
Content of /etc/periodic/daily/400.status-disks
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_status_disks_enable' in
[AA] [Ee] [Ss])
ECHO «»
echo "record status:
DF $daily_status_disks_df_flags & & rc = 1 | RC = 3
;;
*) rc = 0;
ESAC
output $rc
Content of /etc/periodic/daily/420.status-network
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_status_network_enable' in
[AA] [Ee] [Ss])
ECHO «»
echo "State of the network interface:
case '$daily_status_network_usedns' in
[AA] [Ee] [Ss])
netstat-i & & rc = 0 | RC = 3;
*)
netstat - in & & rc = 0 | RC = 3;
ESAC;
*) rc = 0;
ESAC
output $rc
Content of /etc/periodic/daily/430.status-rwho
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_status_rwho_enable' in
[AA] [Ee] [Ss])
RWHO(1) = $(echo/var/rwho / *)
If [f ' ${rwho(1) % *} "]
then
ECHO «»
echo "the system of Local network status:
PROG = ruptime
on the other
ECHO «»
echo "Local System State:
PROG = running time
FI
RC = $($prog | tee/dev/stderr | wc-l)
If [$?-eq 0]
then
[$rc - gt 1] & & rc = 1
on the other
RC = 3
FI;
.. .and 3 more lines
Content of /etc/periodic/daily/999.local
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
RC = 0
script in $daily_local
do
echo "
case '$script' in
/*)
If [f "$script"]
then
echo "Running $script:
sh $script | RC = 3
on the other
echo "$script: no file.
[$rc - lt 2] & & CR = 2
FI;
*)
echo "$script: not an absolute path.
[$rc - lt 2] & & CR = 2;
ESAC
fact
output $rc
Content of /etc/periodic/monthly/199.rotate-fax
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
ECHO «»
printf %s "rotation of the fax log files:
CD/var/log/fax
I'm in * .log; do
If [f ' ${i} "]; then
echo-n "$i".
If [x - / usr/bin/gzip]; then gzext = ".gz". else gzext =""; FI
If [f ' ${i} $.3 {gzext} "]; then mv-f "${i} $.3 {gzext}" "${i}.4$ {gzext}"; FI
If [f ' ${i} $.2 {gzext} "]; then mv-f "${i} $.2 {gzext}" "${i} $.3 {gzext}"; FI
If [f ' ${i}.1$ {gzext} "]; then mv-f "${i}.1$ {gzext}" "${i} $.2 {gzext}"; FI
If [f ' ${i}.0$ {gzext} "]; then mv-f "${i}.0$ {gzext}" "${i}.1$ {gzext}"; FI
If [f ' ${i} "]; then mv-f "${i}" "${i}.0" & & if [x - / usr/bin/gzip]; then gzip-9 "${i}.0. FI; FI
Touch "${i}" & & chmod 640 ' ${i} "& & chown root: admin" ${i} ".
FI
fact
ECHO «»
Content of /etc/periodic/monthly/200.accounting
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
oldmask = $(umask)
umask 066
case '$monthly_accounting_enable' in
[AA] [Ee] [Ss])
W = / var/log/wtmp
RC = 0
Remove = NO
If [$rc - eq 0]
then
ECHO «»
echo "doing the accounting of connection:
RC = $(ac-p |) Sort - nr k 2 | Tee/dev/stderr. WC - l)
[$rc - gt 0] & & rc = 1
FI
[$remove = YES] & & rm-f $W.0;
*) rc = 0;
ESAC
umask $oldmask
output $rc
Content of /etc/periodic/monthly/999.local
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
RC = 0
script in $monthly_local
do
echo "
case '$script' in
/*)
If [f "$script"]
then
echo "Running $script:
sh $script | RC = 3
on the other
echo "$script: no file.
[$rc - lt 2] & & CR = 2
FI;
*)
echo "$script: not an absolute path.
[$rc - lt 2] & & CR = 2;
ESAC
fact
output $rc
Content of /etc/periodic/weekly/320.whatis
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$weekly_whatis_enable' in
[AA] [Ee] [Ss])
ECHO «»
echo "reconstruction whatis database:
MANPATH ='/ usr/bin/manpath - q'
If [$? = 0]
then
If [-z "${MANPATH}"]
then
echo "manpath impossible to find directories manpage.
RC = 3
on the other
RC = 0
/usr/libexec/makewhatis.local "${MANPATH}" | RC = 3
If [X "${man_locales}"! = X]
then
I'm in ${man_locales}
do
LC_ALL = $i /usr/libexec/makewhatis.local - a------.
-L "${MANPATH}" | RC = 3
.. .and 9 more line (s)
Content of /etc/periodic/weekly/999.local
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
RC = 0
script in $weekly_local
do
echo "
case '$script' in
/*)
If [f "$script"]
then
echo "Running $script:
sh $script | RC = 3
on the other
echo "$script: no file.
[$rc - lt 2] & & CR = 2
FI;
*)
echo "$script: not an absolute path.
[$rc - lt 2] & & CR = 2;
ESAC
fact
output $rc
Contents of the /Library/Preferences/com.apple.security.appsandbox.plist (text of XML document)
<? XML version = "1.0" encoding = "UTF-8"? >
<! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""
< plist version = "1.0" >
< dict >
< key > UnrestrictSpotlightContainerScope < / key >
< true / >
< / dict >
< / plist >
Contents of the /Library/Preferences/SystemConfiguration/com.apple.Boot.plist (text of XML document)
<? XML version = "1.0" encoding = "UTF-8"? >
<! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""
< plist version = "1.0" >
< dict >
Flags kernel < key > < / key >
< string > < / string >
< / dict >
< / plist >
Problems of fonts: 57
Listeners
launchd: afpovertcp
launchd: afpovertcp
launchd: microsoft-ds
launchd: microsoft-ds
KDC: kerberos
Safari extensions
AdBlock
Auto Refresh
Hide & Seek
IncognIt VPN switch
YoutubeWide
Restricted file: 706
Senior leaders
Office: 255
Time elapsed (s): 246
Hi dedidude,
Thank you for using communities Support from Apple. I know it's important to be able to use iTunes to access your media, so I'm happy to provide advice to connect to the iTunes Store again.
To resolve this, see the steps that we have in our articles here:
If you cannot connect to the iTunes Store
Advanced steps for fixing problems with the iTunes Store connection
Have a great rest of your day, cheers!
-
interpretation of AAA authorization
Hello..
Is this a correct interpretation on aaa authorization?
If I want to allow some commands or a certain privilege I use the following example
AAA authorization command 7 Group Ganymede
No authorization from aaa config-commands
If you want to allow all commands, you must use the following:
AAA authorization config-commands
allow all orders except the configuration commands that we type in the configuration mode:
Router (config) #.
Configure a Terminal command is a command to exec level and should still be allowed in the command define the AAA server.
Even if you are runnning access to level 15 and you turn on command authorizarion using a RADIUS AAA server on this level 15, all the commands you type will be checked at the server level to see if they were authorized or not.
Tariq
-
I have the following Setup on my way...
AAA new-model
AAA authentication login default group Ganymede + local
authentication connecting line CONSOLE of AAA.
AAA authorization config-commands
AAA authorization exec default group Ganymede + local
AAA authorization commands 1 default group Ganymede + authenticated if
AAA authorization commands by default 10 group Ganymede + authenticated if
AAA authorization commands 15 default group Ganymede + authenticated if
The problem is that when I log into the switch through the console port and enter these commands in, I instantly "Command authorization failed" on all orders get there. It's mind-boggling because there is no possible way that the switch is in talks with my Cisco ACS. I have not yet put in the radius-server key. I have to restart the box every time. What Miss me?
Thank you for your time. I use IOS Version 12.2 (25) SEB4.
-Andrew
Hello
Before proceeding with the configuration of Ganymede create a local user.
Add the following commands.
username cisco password cisco
AAA new-model
AAA authentication login default group Ganymede + local
AAA authorization commands 1 default group Ganymede + authenticated if
AAA authorization commands 15 default group Ganymede + authenticated if
AAA authorization config-commands
RADIUS-server host x.x.x.x
GANYMEDE-server key...
Please mark me if it helps you
-
My installer of windows 7 is corrupted and will not install office 2007, I tried the suggested fixes but still error 2 in windows install when I hit start
How can I get this problem... Thank you
Well, I don't know what patches you have tried.
Troubleshoot Windows install
2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer
http://support.Microsoft.com/kb/2438651
Substitute:
Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:
1. in the menu 'Start', click on ' execute:.»
2. in the "Open" box, type "msiexec /unreg", and then press ENTER.
3. in the menu 'Start', click 'run '.
4. in the "Open" box, type "msiexec/regserver", and then press ENTER.
or
Click Start Orb, in the box, type search: Regedit.
Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver
Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
Also:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
-
Hello
I'm a Subscriber CC Pro since 10 months ago and the month last Adobe could not charge my credit due to no more limit card and my subscription has been cancelled until I can solve the problem.
Now that my credit card number has been resolved, I tried to launch a new plan but my payment always failed with the message: "failed authorization of payment. Tried a different credit card has occurred the same message. Try different browsers (and even computers) also did not help. Last thing, I tried creating a different Adobe ID, but still not helped.
I chat with a customer service and it returns me to the dealers in my country (which is the Malaysia if it helps) so I called them and once again a dead end, as they said they can only help to buy Creative Cloud not individual team.
It's almost a month now and I still not able to solve the problem.
Can someone help me here as I really need to get my creative cloud works again.
Thank you!
I send the question to the relevant team, I expect the answer.
Concerning
Baudier
-
Hello
Can someone help me to find the number in the given pakg.
I'm tring to send e-mails through this package, but I make a few mistakes: -.
create or replace package body mail_pkg
as
function address_email (p_string in varchar2,
p_recipients table) return varchar2
is
long l_recipients;
Start
because me in 1... p_recipients. Count
loop
UTL_SMTP. RCPT (g_mail_conn, p_recipients (i));
If (l_recipients is null)
then
l_recipients: = p_string | p_recipients (i);
on the other
l_recipients: = l_recipients | ', ' || p_recipients (i);
end if;
end loop;
Return l_recipients;
end;
procedure writeData (p_text in varchar2)
as
Start
If (p_text is not null)
then
UTL_SMTP.write_data (g_mail_conn, p_text | g_crlf);
end if;
end;
procedure to send (p_sender_email in varchar2,
P_FROM in varchar2,
p_to in the table by default array(),
p_cc in the table by default array(),
p_bcc in the table by default array(),
p_subject in varchar2,
p_body long)
is
long l_to_list;
long l_cc_list;
long l_bcc_list;
l_date VARCHAR2 (255) default TO_CHAR (SYSDATE, 'dd my hh24:mi:ss yy') | ' + 8:00 (GMT + 08:00) ";
Start
SELECT PARAM_VALUE IN g_mailhost OF IHR_PARAM_DATA
WHERE PARAM_CODE = 'MAIL_HOST' AND
((CATÉGORIE = S ')) AND
(((FROM_DATE EST NULL) AND (TO_DATE IS NOTHING)) OR)
((FROM_DATE EST NULL) AND (TO_DATE > = trunc (sysdate))) OR
((FROM_DATE < = trunc (sysdate)) AND (TO_DATE IS NULL)) OR
((FROM_DATE < = trunc (sysdate)) AND (TO_DATE > = trunc (sysdate))) AND
SEQUENCE = (SELECT MIN (SEQUENCE) IHR_PARAM_DATA
WHERE PARAM_CODE = 'MAIL_HOST' AND
((CATÉGORIE = S ')) AND
(((FROM_DATE EST NULL) AND (TO_DATE IS NOTHING)) OR)
((FROM_DATE EST NULL) AND (TO_DATE > = trunc (sysdate))) OR
((FROM_DATE < = trunc (sysdate)) AND (TO_DATE IS NULL)) OR
((FROM_DATE < = trunc (sysdate)) AND (TO_DATE > = TRUNC (SYSDATE))) );
g_mail_conn: = utl_smtp.open_connection (g_mailhost, 25);
UTL_SMTP. HELO (g_mail_conn, g_mailhost);
UTL_SMTP.command (g_mail_conn, 'auth login');
UTL_SMTP.command (g_mail_conn,
mail_pkg.f_base64_encode_raw (utl_raw.cast_to_raw ('mailuser')));
UTL_SMTP.command (g_mail_conn,
mail_pkg.f_base64_encode_raw (utl_raw.cast_to_raw('***')));
UTL_SMTP.mail (g_mail_conn, p_sender_email);
l_to_list: = address_email ("to:", p_to);
l_cc_list: = address_email ("Cc:", p_cc);
l_bcc_list: = address_email ("Bcc:", p_bcc);
UTL_SMTP.open_data (g_mail_conn);
writeData (' Date: ' | l_date);
writeData (' to: ' | nvl (p_from, p_sender_email));
writeData (' subject: ' | nvl (p_subject, '(aucun sujet) "));
writeData (l_to_list);
writeData (l_cc_list);
UTL_SMTP.write_data (g_mail_conn, "| g_crlf);
UTL_SMTP.write_data (g_mail_conn, p_body);
UTL_SMTP.close_data (g_mail_conn);
UTL_SMTP. Quit (g_mail_conn);
end;
end;
I get the below error when tring to run the procedure, even if my e-mail and password are correct.
ERROR on line 1:
ORA-29279: SMTP permanent error: 535 authorization failed (#5.7.0)
ORA-06512: at "SYS." UTL_SMTP", line 21
ORA-06512: at "SYS." UTL_SMTP", line 99
ORA-06512: at "SYS." UTL_SMTP", line 159
ORA-06512: at "SYSTEM. SEND_MAIL', line 12
ORA-06512: at line 1
pls help;
Thank you
Uttam Singh
Published by: Uttam Singh on December 26, 2008 19:56Uttam,
This error is due to wrong settings of the SMTP server. Oracle, very probably has nothing to do with it. If I remember correctly, you are using Gmail for her. I guess there is a problem with it. Try with some other parameters of the field. I'll try to use the same with my own domain name. In the meantime, enjoy these two link.
http://www.williamrobertson.NET/code/utilities.pkg.txt
http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:2118740358226 #9206460145191
HTH
Aman... -
my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!
You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.
Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.
Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.
Step 1
VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.
Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.
Step 2
When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:
/Library/LaunchDaemons
In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.
There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.
Step 3
In the LaunchDaemons folder, there may be one or more files with the name of this form:
com Apple.something.plist
When something is a random string, without the letters, different in each case.
Note that the name consists of four words separated by dots. Typical examples are:
com Apple.builins.plist
com Apple.cereng.plist
com Apple.nysgar.plist
There may be one or more items with a name of the form:
com.something.plist
Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.
These names consist of three words separated by dots. Typical examples are:
com.semifasciaUpd.plist
com.ubuiling.plist
Sometimes there are items (usually not more than one) with the name of this form:
com.something .net - preferences.plist
This name consists of four words (the third hyphen) separated by periods. Typical example:
com.jangly .net - preferences.plist
Drag all items in the basket. You may be prompted for administrator login password.
Restart the computer and empty the trash.
Examples of legitimate files located in the same folder:
com.apple.FinalCutServer.fcsvr_ldsd.plist
com Apple.Installer.osmessagetracing.plist
com Apple.Qmaster.qmasterd.plist
com Apple.aelwriter.plist
com Apple.SERVERD.plist
com Tether.plist
The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.
Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.
If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.
If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.
Step 4
Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select
▹ Safari preferences... ▹ General
and click on
Set on the current Page
If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.
The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.
Step 5
The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.
Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.
Step 6
This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.
-
I got the expired cartridge message on my Photosmart 8250 for a year or two, for 2 cartridges, even if the cartridges were of the date. Remove one of the offending cartridges and replace immediately seem to do the sorting. Problem is one of the "expired" cartridges, Magenta, has finally shown as empty and reinstated. I get now both the message expired and the empty cartridge (for all new Magenta). The watch also still message has expired for the cartridge else I have to say is now quite old, but still has a lot of ink in it.
I gritted my teeth and to purchase 2 cartridges of spare yesterday, one to replace the old "expired" clear cyan and the other to replace magenta of replacement. The clear cyan expired message disappeared but the message re magenta is still show it as being expired, even if the dates printed on the two new magenta cartridges is 2014. I always get the message empty cartridge for both the first replacement magenta cartridge that I bought a few days ago, as well as for the second replacement I bought yesterday.
I have tried everything I can find mentioned in this forum to solve this problem, but have had no success. I have to assume that the printer has failed, or is there a fix for this problem?
If you have another cartridge, which could remove the error. You do not have to throw away your existing criteria, just put them in a ziplock bag in plastic and place them in a cool, wet - spot like a refrigerator. Change the cartridges and see if this removes the error message.
If you can try that let me know and I'll be right back with you!
Have a wonderful day!
-Spencer
-
Alarm began some time ago. Enter laptop makes at startup, ok. Internal battery changed but still gets the same alarm.
Battery type CR2032. Ran that test battery had failed Id 6C757T-5417NN-XD003G-C0BX03 primary SCHOOL.
Bought the dv6 2010.
Hello
First error 601 internal battery is not for the RTC battery, it's for the main battery. You need to perform a test, if you need to replace the main battery.
http://support.HP.com/au-en/document/c00821536
Kind regards.
Maybe you are looking for
-
FireFox won't let me not do right click to change the bookmark names
I recently bought a new computer and downloaded FireFox. When you add my favorite sites to my bookmark, the names are added automatically. They are too long, and I want to change them, but FF is not letting me do a right click to change the name. Whe
-
I had a few screws that stored in a. File LLB. Is it possible to call these screws in c#? If so, could someone can share a demo for me code? Thank you!
-
LabVIEW FPGA: Problem compiling look-up Table
Current versions of software: LabVIEW 2014 SP1 LabVIEW FPGA 2014 Xilinx Vivado I'm having a huge problem in trying to compile my LabVIEW FPGA code. Some recall of the code: It's all in a SCTL. I am streaming in a FIFO DMA and comparing it with the va
-
Could not open the controls in Windows Media Player mode full screen
Multimedia player mode full-screen, impossible to open the controls, I move the mouse and it doesn't work, no cursor. no control, so cannot stop plays etc.
-
I try to install the updates, but they fail - error code is 80070005.
Let me start that I'm computer illiterate until a point and it becomes very frustrating... I use Windows Vista Service pk2 I went and deleted temporary files and all requested without success.