About Oracle courses

Similar Questions

• Dreamweaver is right for me? (also Question about Adobe courses)

  Hello!

  I am a student of five year

  who is eager to learn

  design of websites and animations.

  I already have Photoshop cs5

  but I want to learn more about the design of web sites.

  Dreamweaver is the correct program?

  I have also a question about Adobe courses (online)

  Will they go through and show you how to create websites

  with dreamweaver... Models, etc. like this stuff?
  All comments appreciated.

  Thank you

  CG

  I am rustic most qualified to answer this question, but I'll have a go at it. First of all, I admire your ambition!

  Dreamweaver is a great tool, but it will not necessarily learn you webdesign. Once you have an idea base of what happens in a website design, you'll really enjoy what DreamWeaver can do for you. I'll give you the same advice I was given when I wanted to first get into DreamWeaver and web design.

  I would really suggest some basic HTML and CSS books and use a text editor to create your first pages. Once you start to undersatnd that you do, then by all means, get a DreamWeaver training. Everyone has their own favourite titles to learn the basics, so I'll just say this is a suggestion and has helped me to start. The first head of series has been clearly written, has a good sense of humor, and helped me to get the basics. Check your libraries, shops of second hand books or other resale stores. I know you mentioned the Adobe online, but I have also used and as, Adobe Classroom in a Book series. Once I learned a particular version, I found the Missing Manual good for cutting-edge issues series and going to a new version.

  Don't be discouraged, stick with it and don't be afarid to try another book, if you don't like what I suggested. We all learn differently and what has worked for me may not work for you!

• Question about oracle objects

  Hi people

  I came across the below example on the oracle documentation.

  I'm not quite sure why "emp is NULL #2' always get printed even if the Member attribute is assigned a value that should be non-NULL and" ""emp is NULL #3"isn't even after printing has been assigned to the object with a NULL value."

  Can one of you you please explain about it. or give the overview of the conditions of the NULLable object. Thank you!!

  DECLARE

  EMP employee_typ; -emp is atomically null

  BEGIN

  If emp IS NOTHING THEN DBMS_OUTPUT. Put_line ("emp is NULL #1"); END IF;

  IF emp.employee_id IS NULL THEN

  DBMS_OUTPUT. Put_line ("emp.employee_id is NULL #1");

  END IF;

  EMP.employee_id: = 330;

  If emp IS NOTHING THEN DBMS_OUTPUT. Put_line ("emp is NULL #2"); END IF;

  IF emp.employee_id IS NULL THEN

  DBMS_OUTPUT. Put_line ("emp.employee_id is NULL #2");

  END IF;

  EMP: = employee_typ (NULL, NULL, NULL, NULL,

  NULL, NULL, NULL, NULL, NULL, NULL, NULL,

  address_typ (NULL, NULL, NULL, NULL));

  -emp: = NULL; -It would have made the following statement of the TRUE IF

  If emp IS NOTHING THEN DBMS_OUTPUT. Put_line ("emp is NULL #3"); END IF;

  IF emp.employee_id IS NULL THEN

  DBMS_OUTPUT. Put_line ("emp.employee_id is NULL #3");

  END IF;

  EXCEPTION

  WHEN ACCESS_INTO_NULL THEN

  DBMS_OUTPUT. Put_line ('impossible to assign object NULL value');

  END;

  /

  The result is:

  
  EMP is NULL #1
  EMP.employee_id is NULL #1
  EMP is NULL #2
  EMP.employee_id is NULL #3

  I came across the below example on the oracle documentation.

  I'm not very sure why 'emp is NULL #2' always get printed even if the Member attribute is assigned a value that should be non-NULL and ' emp is NULL #3 "is not get printed even though the object is assigned to null."

  Can one of you you please explain about it. or give the overview of the conditions of the NULLable object.

  Have you actually tried this example? Why not?

  The best and often faster, learn is to DO - not just read.

  If you tried this example, you would see that you have been "bitten" by a documentation bug.

  EMP.employee_id: = 330;

  That the line of code won't work - it will trigger an exception is the output you get really

  PEM is NULL #1

  EMP.employee_id is NULL #1

  Can't assign value to the NULL object

  PL/SQL procedure successfully completed.

  SQL >

  The 'emp' instance has the value NULL as shows it the first message. If you cannot assign the 330 value him.

  For others, the example seems to be the Oracle documentation

  http://docs.Oracle.com/CD/B19306_01/AppDev.102/b14261/objects.htm#CIHEJIBA

• Ask about Oracle certification for the Admin path

  Hi I have the underside of certifications under my belt:-1. Oracle Certified Associate of PL/SQL Developer 2. Oracle PL/SQL Developer certified professional that I would give Oracle Database 11 g administration Associate certification. I see that I need to give exams 1Z0-051 and 1Z0-052 for. So my question is whther I need to give Z051 review? Keeping in mind, I traced level OCP, authorized as a PL/SQL Developer. Thanks in advance...

  How can I get confirmation on this officially?

  See the FAQ:

  https://education.Oracle.com/pls/web_prod-PLQ-dad/db_pages.GetPage?page_id=82

  Look for the "SQL Fundamentals".  One of the questions will be: "How long can I use an exam to earn a certification? "Exam results expire?"

  The answer is: "do not expire the results of exams, but certifications are retiring, and that affects your older test results will help you to get certified or not. "

  If a specific review meets a requirement in a current certification path, it does not matter if you have passed the exam. "For example, if you have taken SQL, # 1Z0-001 review in 1997, you can always use it meets the requirement of SQL for Oracle database current certification."

  If you do not trust that - the moderator of the forum, Brandye, can come in a day or two to confirm what I said.  However, there is no doubt.  The question comes up fairly often.  In fact, I wrote a blog on this subject for more than a year (although this would not even "official", of course):

  Preparation of Oracle Certification: Oracle SQL Fundamentals exams and database versions

• Question about Oracle schema E/R database dictionary

  Hello
  
  As we know, the dictionary in an Oracle database is a fairly large beast. I was wondering if there was an ERD of the tables/views most commonly used or available useful. That would make familiar you with the dictionary quite a little easier.
  
  I've been Googling for such a scheme, but without success.
  
  The question is: does anyone know where such a diagram might be available? If Yes, where?
  
  Thank you for your help,
  
  John.

  Are you talking about view DBA_xxx (DBA_TABLES, DBA_USERS, etc.) or V$? If you're talkink about DBA_xxx views, please google with "poster oracle dictionary '..."

  Edited by: P. Forstmann on Sept. 5. 2010 18:57

• Technical questions about Oracle Linux

  What is the ideal RAM should I assign to my virtual machine to run Oracle 12 c for personal use.

  Personal use - convenient, cloning, backup of the database. Recovery of database of .dbf file. Sqldeveloper execution. Thanks in advance.

  I did it with 2 GB of RAM dedicated to the virtual machine. If you host only has 4 GB of RAM, so you may not be able to run many other in the VM host upward.

  That being said, I have usually at least 8 GB of RAM on my laptop work/computers positions of our days, if not more. With 8GB, I can create a 4 GB VM and have a better experience.

  See you soon,.
  Brian

• Some doubts about Oracle DBA...

  Respected, professionals

  I am new to Oracle RAC DBA. Knew just CARS and have some doubts, associated with Oracle RAC databases and a few other s/n basic questions.

  (1) client connected to one of the rac node in the database of node three cars by scan listener. The node to which it is connected was dead. My question is - is that its connection automatically goes to the next available node

  without using TAF? Or he needs to connect again? I have to configure TAF as in 10g RAC? or the configuration of TAF to perform a SCAN is completely misconceptual?

  (2) a database connection request will be going to one of the node system of three-node rac (shooting technology in return for load balancing). How can I connect remotely to PuTTY tru particular node?

  Do I need to enter particular node (virtual host as IP) TNS in tnsnames.ora in my system oracle client?

  (3) we have a listener to scan with three IP for RAC 3-node addresses. If you add a new node, I need to create another listener with a single IP address scan? or do I need to add another IP existing scan listener? What should I do to connect again with existing scan listener node?

  My sincere apologies over the three questions are completely misleading or false.

  (4) incremental 11 g rman are speed, compared with 10 g rman. WHY?

  (5) how connect us using sqlplus. (No high level architectural decoration). I mean what happens when connect us to the database using SQL * more (SQLPLUS scott/tiger)?

  My sincere apologies if any inconvenience caused... I know this isn't a chat BOX... Please forgive me If my way of questioning is insulting and rude.

  Thank you

  Hello

  (1) client connected to one of the rac node in the database of node three cars by scan listener. The node to which it is connected was dead. My question is - is that its connection automatically goes to the next available node

  without using TAF? Or he needs to connect again? I have to configure TAF as in 10g RAC? or the configuration of TAF to perform a SCAN is completely misconceptual?

  If there is no TAF not configured you will have to reconnect.

  TAF can be configured on the side client (tnsnames.ora) or side (srvctl) server.

  (2) a database connection request will be going to one of the node system of three-node rac (shooting technology in return for load balancing). How can I connect remotely to PuTTY tru particular node?

  Do I need to enter particular node (virtual host as IP) TNS in tnsnames.ora in my system oracle client?

  You can connect to one of the nodes via PuTTY using the public IP node.

  To connect to a particular instance through SQLPLU, then you must specify the IP node-vip in tnsnames.ora.

  (3) we have a listener to scan with three IP for RAC 3-node addresses. If you add a new node, I need to create another listener with a single IP address scan? or do I need to add another IP existing scan listener? What should I do to connect again with existing scan listener node?

  You don't need to create another auditor SCAN.

  For your new node, you must assign the listener SCAN and LOCAL_LISTENER REMOTE_LISTENER must be defined on node-VIP.

  Ivica

  Post edited by: Ivica Arsov

• Can anyone tell me about Oracle Data Governance Manager? How to do with it?

  Hai all,

  We plan to implement Oracle Master Data Management.Please Oracle customer hub should be read the following link and tell me how to work on Oracle Data Governance Manager.

  Where can I find it?

  What are the steps in the implementation?

  http://www.Oracle.com/us/products/applications/master-data-management/Oracle-customer-hub-439838.PDF

  Hello Nandini,

  DGM software build can be downloaded from My Oracle Support via the "Patches and updates" tab with the name/number of patch 9329831 (currently password protected; please connect to a service request and ask for a password).

  Installation of the DGM: for more information on how to install the CMD are documented in siebel Guide Version to maintain 8.1.1.x, O Rev., Section: management and governance of data installation (DGM).

  Steps to customize the application of governance (DGM) (Doc ID 1323952.1) data management
  Document provides steps to customize the application of the DGM, makes it easier to change the skin via CSS stylesheet changes in the application of OOTB DGM.

  Reference: Oracle Master Data Management - Information Center Customer Hub (Siebel UCM) - installation of the life cycle (Doc ID 1081980.1).

  Thank you

  Shilpi

• Questions about oracle advanced concepts

  All,
  
  Database version: 11.2.0.3
  
  How can we identify if my database using GG (Golden Gate), ADG (Active Data Guard), TDE (Transparent Data Encryption), advanced security option?
  
  Are there tables to display these details?
  
  Thank you

  A lot of information characteristic use is available in the http://docs.oracle.com/cd/E11882_01/server.112/e25513/statviews_3181.htm#I1023396 views DBA_FEATURE_USAGE_STATISTICS
  Some features are available, but require to pay for a license if you use them, so check with your DBA before being the first to use one, or it could cost a lot of money.
  Same V$ OPTION lists the options that are installed, but they could not be approved.

  Oracle Enterprise Manager displays DBA_FEATURE_USAGE_STATISTICS information on the server 'Use of database feature see' page.

  For example
  Select Name, version, Detected_usages of DBA_FEATURE_USAGE_STATISTICS

  where upper(name) like '%GOLDEN%' or upper(name) like '%ACTIVE%'
  or upper(name) like '%TRANSPARENT DATA%' or upper(name) like '%SECURITY%'
  
  NAME                                                             VERSION           DETECTED_USAGES
  ---------------------------------------------------------------- ----------------- ---------------
  Active Data Guard - Real-Time Query on Physical Standby          11.2.0.3.0                      0
  GoldenGate                                                       11.2.0.3.0                      0
  Transparent Gateway                                              11.2.0.3.0                      0
  Transparent Data Encryption                                      11.2.0.3.0                      0
  Label Security                                                   11.2.0.3.0                      0
  
  select parameter, value from v$option
  where upper(parameter) like '%GOLDEN%' or upper(parameter) like '%ACTIVE%'
  or upper(parameter) like '%TRANSPARENT DATA%' or upper(parameter) like '%SECURITY%';
  
  PARAMETER                                                        VALUE
  ---------------------------------------------------------------- ----------------------------------------------------------------
  Enterprise User Security                                         TRUE
  Oracle Label Security                                            FALSE
  Transparent Data Encryption                                      TRUE
  Active Data Guard                                                TRUE
  

  Do not trust with value = TRUE in the parameter $ v as meaning that you can use a feature - you might not be allowed - but if it's WRONG you certainly cannot.

• Want to know about Oracle Obiee (New to SQL and OBIEE)

  Hello
  I am currently working on software testing. And I want to change my domain obiee.but Oracle name I know only moderate on SQL.
  It will be difficult for me to learn oracle obiee pl/sql knowledge?
  What the Oracle obiee tool market British?
  Can install the oracle obiee and can practice at home for more experience?
  
  Please delete all these doubts
  
  Thank you

  Yes, you can learn at the same time.

  Use this link for all
  http://docs.Oracle.com/

  for BI
  http://www.Oracle.com/technetwork/middleware/bi-Foundation/documentation/bi-doc-085721.html

  Just to start

  Hope this helps, if indeed correct brand

  Published by: Srini VIEREN on January 3, 2013 05:55

• Question about Oracle identity analytics

  Hello
  
  Is it possible in Oracle identity analytics (version 11.1.1.3.0) to compare the datas in OIA and data in LDAP for example?
  
  The goal is to see the differences between this 2 databases for roles and strategies.
  
  If possible, can you tell me how to make that comparison?
  
  Thanks for your help...

  I think not - OIA with no agents / connectors. What you can be able to model the data in the LDAP protocol as a resource in OIA and run a report against that?

• Passage of arguments about Oracle IRM Office

  Hello
  
  I am new to Oracle IRM and I'm trying to preconfigure Oracle IRM Desktop passing some arguments according to Oracle IRM Desktop Guide, but I don't know where and how put the parameters.
  
  Thanks for your help.
  
  Edgar Galvan.

  Hi Edgar,

  Ah! I see. Ok. I'm sorry. Here is our approach. We assume that for interactive installations, just simply run the exe, and then apply the settings that you need through the user interface. We assume that the additional settings are required for multi-users deployment will go quietly preconfigured with settings appropriate to that end users can just click and go. This can be bundled in a script that may have to do other things, like taking note of the fact that another licnse software has been used, or the end user enter the appropriate server application. For example, in Oracle, we have a central location called MyDesktop which hosts all the software that we are called to use. We just there click the appropriate software and then a specific installer MyDesktop downloads the software to our desktop and installs the software with all the required parameters and the parameters of our environment.

  So, to answer your question directly, if you are an administrator, we would expect you:

  1 extract the MSI to EXE file that you have downloaded from OTN already.
  2 create a script with the command msiexec calling the MSI and the parameters on the command line.

  To extract the MSI file:

  Note: If you are a customer you have connected on My Oracle Support and sought "extracted from MSI. You would have found KM Note 451873.1 which deals with this. In any case, here's what you do:

  * Run the installation executable provided and wait for the Welcome window to appear.
  Open Windows Explorer and go to Windows TEMP%.directory. The location of this folder varies depending on the operating system

  Windows XP: C:\Documents and Settings\\LocalSettings\Temp\
  Windows 7 or Vista: C:\Users\\AppData\Local\Temp\

  .. where is your login username.

  * The subfolder is named Oracle-MRI-Installer-1234567890 where 1234567890 can be any 10-digit number.
  * In the new directory, you will find the MSI installer (this is the file ending in ".msi") and a Setup log
  * Copy the MSI installer in a different directory.
  * On the Welcome window, press Cancel. Confirm that you do not want to continue the installation.
  * Click on finish in the final install window. You can delete the temporary directory that was created because it is not deleted when you quit the process.

  I hope this helps!

  Kind regards
  Frank.

  Published by: Frank Abela on April 21, 2011 09:52

• Need to best way to start learning about Oracle 11 g DBA

  Hi.This is Dumond.
  I want to learn Oracle 11 g DBA. I downloaded all of the software and Documentation 11g R2 Orcl. Now. I want to start learning DBA. Can someone suggest me the best way to start learning DBA?
  Please suggest me good books for Architecture Oracle and SQL...

  Hello

  If you are good in 10g then just start new book of 11g function.
  Else read the admin guide and the whole concept of 11g.

  I always refer to the oracle documentation, and a small test DB intended to test.

  Read and practice :)

  Kind regards
  Rakesh jayappa

  Published by: Rakesh jayappa on September 21, 2010 03:09

  Published by: Rakesh jayappa on September 21, 2010 03:10

• Information about Oracle Adf

  Is Oracle Adf Framework Open Source?

  N °

  ADF is a software developed and maintained by Oracle Corp.

  Kind regards

  Nick

• RMAN can back up/restore different versions of OS without worrying about Oracle databases

  Hello
  
  I am to evaluate Recovery Manager to back up and restore Oracle databases.
  
  I save/restore the Oracle data base diferents versions, these databases are running in different operating systems (AIX, LINUX, Windows)
  
  For example:
  Database Oracle 9 in AIX 5.3 system
  Database Oracle 10 system Lunix
  Database Oracle 9 in Windows system
  
  I want to have a single server RMAN for backup/restore all my databases Oracle, is it possible?
  
  A single RMAN server can backup/restore different versions of databases Oracle regardless of the operating system?
  
  If the answer is Yes, do I need to have an operting specif system in my RMAN Server? (AIX, Linux, Windows, etc.).
  
  
  Thanks for your help;

  On the new server, install the rman recovery catalog and save all databases.

  Then you can back up these databases independent of the platform and version by using the recovery catalog.

  However, some of the features that you backup cannot be used based on the version of database. For example, backup compression is available on 10g but not in 9i.

  HTH.

  Nirmal