Absolutefieldmanager with vertical scrolling

Similar Questions

• Problem with vertical scroll bar of the block master detail

  Have a TC of canvas by tabs with 3 tabs - tab A, B and C

  Tab C contains a block of master child multi. Each block can display 5 records.

  C tab

  -> Master Block can display 5 records

  -> Child block can show 5 records. Child block has nearly 20 columns to display. It is therefore a big canvas

  question

  It comes with vertical toolbars on Master Block and child block.

  The horizontal toolbar works very well.

  But if there are more than 5 records, we are not able to scroll the vertical toolbar.

  Remember reading somewhere that for a block of single bar scrolling can be active. Please specify if this is correct and indicate what are the appropriate actions that we can take.

  Thank you

  951614 wrote:

  But if there are more than 5 records, we are not able to scroll the vertical toolbar.

  You have a separate master and detail block, right scroll bar?

  If so, then which bar scroll creating problem for you, master? detail? or both?

  Make sure you have the block with the appropriate scroll bar card, it can possible you have set the bar of scrolling detail with master block and main scroll bar with detail block.

  951614 wrote:

  Remember reading somewhere that for a block of single bar scrolling can be active. Please specify if this is correct and indicate what are the appropriate actions that we can take.

  It is not correct.

  You used the scroll bar with individual block. There is no restriction.

• Browserfield overlapping vertical scrolling

  Hello world

  I would add three instance of BrowserField in a VerticalFieldManager related with vertical scrolling,

  As indicated below

  Vfm VerticalFieldManager = new VerticalFieldManager (VERTICAL_SCROLL);

  LabelField lbf1 = new LabelField ("broserfield1");

  VFM. Add (lbf1);

  BrowserField browserfield1 = new BrowserField (myBrowserFieldConfig);

  VFM. Add (browserfield1);

  LabelField lbf2 = new LabelField ("broserfield2");

  VFM. Add (lbf2);

  BrowserField browserfield2 = new BrowserField (myBrowserFieldConfig);

  VFM. Add (browserfield2);

  LabelField lbf3 = new LabelField ("broserfield3");

  VFM. Add (lbf3);

  BrowserField browserfield3 = new BrowserField (myBrowserFieldConfig);

  VFM. Add (browserfield3);

  Add (VFM);

  My problem is that while I'm scrolling in device 9700 the second is superimposed over the first label and browserfield, even a third second labelfield and browserfield.

  How can solve any body help me.

  Thank you.

  Hello

  I found the solution to my problem

  in fact, I added additional HTML code to tag name and add details pending unique browserfield.

  Thank you.

• Vertical scrolling UI problem

  Hello

  I'm just facing an interesting problem with vertical scrolling. All I need is to have a static text as a header that is always on the top of the screen. Everything under it is inside VerticalScrollManager.

  I put it in place and it worked for OS5 and lower. Now, I tried in OS6 and it does not work so this code is probably not the ideal. Could someone corerct me if you please.

  public MyScreen() {
  super(Manager.NO_VERTICAL_SCROLLBAR|Manager.NO_VERTICAL_SCROLL|Manager.NO_HORIZONTAL_SCROLL|Manager.NO_HORIZONTAL_SCROLLBAR|Manager.USE_ALL_WIDTH);
  setTitle("Title");
  
  VerticalFieldManager content = new VerticalFieldManager(Manager.VERTICAL_SCROLL|Manager.VERTICAL_SCROLLBAR) {
  
  protected void sublayout(int w, int h) {
  Field field;
  //get total number of fields within this manager
  int numberOfFields = getFieldCount();
  int x = 20; // I want the fields to be 20 px left of the edge
  int y = 0;
  for (int i = 0;i < numberOfFields;i++) {
     field = getField(i); //get the field
     setPositionChild(field,x,y); //set the position for the field
     layoutChild(field, w-40, h); //lay out the field
     y += field.getHeight()+5;
  }
  setExtent(w-40, h);
  }
  
  };
  
  LabelField topLabel = new LabelField("Always on the top text" );
  add( topLabel );
  
  // many times...
  LabelField allOthers = new LabelField("Other fields..." );
  content.add( allOthers );
  // end many times
  
  add( content );
  
  }
  

  All fields are positioned okay but when scrolling should appear, nothing happane and the cursor disappear under the screen...

  Note: question just the OS 6

  Thanks for any help.

  Jiri

  Finally,.

  I found out the way.

  Pretty simple. Just added

  super.sublayout(w, h);
  

  the first line of the sublayout method.

  So, can someone help.

• a vertical scrolling page to page is reloading - when I click on the menu, it scrolls, and then reload the page. boring

  I created a page a Web site with vertical scrolling and anchor points.  When I click on the menu item, it scrolls, and then reload the page.  How can I stop this action?   I want just a smooth roll to anchor and do not reload each time.

  TIA

  This is not normal. Sounds like something that is triggered by the custom code added to the HTML page or by a third party widget, but it's totally impossible to say without the URL of the page.

• Flex grid: width changes automatically if vertical scrolling policy is 'on '.

  Using Flex 4.1

  I have a grid with vertical scroll policy 'on' I want to make the scroll bar vertically to be shown always. But when I start to add the grid lines, the width of the grid continues to increase to 15 (width of the scrollbar?). I stuck a very simple application below where this behavior is seen.

  No idea why this is happening? Am I missing something to mention?

  There was a bug with vertical scroll policy (http://www.nbilyk.com/flex-scrollpolicy-bug), but it's horizontal scroll bar appearing when the vertical scroll bar is needed instead of content control. It says nothing about the increase in bandwidth.

  Capture instant initial: note the evolution of the distance between the grid scroll bar and the black border that we add more lines

  

  

  

  The application is just a grid with a line containing just one button. all the width is set to 100%

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:Application ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx" minWidth = "500" minHeight = "600".

  width = "500" >

  < fx:Script >

            <! [CDATA]

  protected function add_clickHandler(event:MouseEvent):void

                 {

  var gridRow: GridRow = new GridRow();

  gridRow.width = grid.width;

  grid.addElement (gridRow);

  var gridItem: GridItem = new GridItem();

  gridItem.width = gridRow.width;

  gridRow.addElement (gridItem);

  var button: button = new Button();

  button.width = gridItem.width;

  button.label = "some other row.                   

  gridItem.addElement (button);

                 }

            ]] >

  < / fx:Script >

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < s:BorderContainer

  borderAlpha = "1" borderColor = "0x000000".

  width = "100%" height = "100%" >

  < s:Button

  id = "add" x = "10" y = "10".

  label = "add a line in the table below.

  click = "add_clickHandler (event)" / >

  < mx:Grid

  ID = "grid" x = "0" y = "50".

  verticalScrollPolicy = "on".

  width = "70%" >

  < mx:GridRow width = "100%" >

  < mx:GridItem width = "100%" >

  < s:Button width = "100%" label = "first line" / >

  < / mx:GridItem >

  < / mx:GridRow >

  < / mx:Grid >

  < / s:BorderContainer >

  < / s:Application >

  do not use width percentWidth to use when you set the changes dynamically.

  gridRow.percentWidth = 100;

  
  

  gridItem.percentWidth = 100;

  
  

  button.percentWidth = 100;

• Vertical scrolling with the mouse, Microsoft 6000

  Is that what someone has encountered a problem with the mouse to move the front/diagram of block vertically scrolling panel.  Scroll wheel on the mouse works fine for all other applications, but is very intermittent in LabVIEW 2009.  I'm on a windows 7 OS.

  I tried a series of 5000 ms and that works well.  Any ideas?

  Thank you

  Hi Marc, I reduced the problem by not including not not a software startup in msconfig setup.  Then I discovered the mouse to operate as usual, sort of method of disposal, I reduced to a pointer unwanted facility that I deselected and then ran as usual.  All is well now.

  Thank you

• long pull down the menu with no vertical scroll bar

  People,

  It's been 3.5 years ago when we had to learn that there is no way to have a long drop down menu control without a vertical scroll bar. See

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=217428&query.ID=395029#M217428

  Now, after that we got LabVIEW 8.6.1 there is still no the ability to remove the vertical scroll bar if there is a 'Vertical Scrollbar Visible' property node for the drop-down list boxes. As already observed in 2006 with the drop-down list 8.2 LV Smercurio, this property node has no effect, probably because of a bug. This behavior is always the same with LV 8.6.1.

  A few days ago a user of our software have complained that the menu items would be missing. In fact, they were not, but rather he oversaw the scroll bar and do not scroll to the bottom of the column - that's why it did not find the menu items. In general, it's pretty annoying if you have to scroll first before you can select a particular item. In most cases, the scroll bar is all just useless since the Panel is large enough to display all menu items at the same time.

  How do you design a long drop-down menu on your UI? Any ideas how to get around the scroll bar mean?

  Sorry for the lengthy post. I'm afraid that you have to use the vertical scroll bar while reading my text...

  Thanks for any input,

  Peter

  Stoeckel says:

  Any ideas how to get around the scroll bar mean?

  I think that's what you're asking.  This works for any named digital control, and I think a small change will be too much work for a drop-down list box.

  Jim

• How to enable vertical and horizontal scrolling with sculpt Touch Mouse (W7-64). When I activate horizontal disables vertical scrolling to scroll.

  Load the IntelliPoint software that is more recent, although she did not recover that (!). Scrolling works when you use the Synaptics Touchpad.

  When I turn on all the other functions in the IntelliPoint vertical scrolling is disabled.

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
  The description of the question, I understand that you can not use horizontal and vertical scrolling with sculpt the touch mouse.
  Let me go ahead and help you with the issue.
   
  As you have been told that the IntelliPoint software is updated, but sometimes Sculpt mouse drivers may be outdated which causes this problem.
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  I suggest for the link and follow the steps in the article:
  Install IntelliPoint software and the mouse
  http://support.Microsoft.com/kb/258785#top
   
  Method 2:
  Download and install the drivers from the link:
  http://www.Microsoft.com/hardware/en-in/d/sculpt-touch-mouse
   
  See also:
  http://www.Microsoft.com/hardware/en-in/help/support/how-to/mouse/use-sculpt-touch-mouse
   
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• help with a problem of vertical scroll bar with a list item

  Hello. I have a < s:list > base using an XMLListCollection as there the data provider and a very basic itemrenderer. When a row is clicked in the list a function gets the list.selectedIndex then fills some text with more xml data fields. everything works fine... the problem I have is that the vertical scroll bar on the list seems to be "clickable" - as a line in the list. the scroll bar Scrolls normally but when he clicked on the selectedIndex property becomes-1 which is not useful b/c, the value-1 is passed to the XMLListCollection.

  any ideas? Cheers.

  The default value for SelectedIndex is - 1.  If you have not selected all the items in the list, then it will always return-1.

  Here is a sample application, view, if you select an item and then click the scroll bar is not - 1:

  http://ns.Adobe.com/MXML/2009.
  xmlns:s = "library://ns.adobe.com/flex/spark" >
     
     
          Import spark.events.IndexChangeEvent;
  protected function list1_clickHandler(event:MouseEvent):void {}
  trace ("Click event:", event.currentTarget.selectedIndex);
  }
  protected function list1_changeHandler(event:IndexChangeEvent):void {}
  trace ("change the event:", event.currentTarget.selectedIndex);
  }
  ]]>
     
     
     
         
     
     
  

• PowerPoint for Mac bar vertical scrolling does not work in the Sierra

  I have downloaded Sierra, open a PowerPoint for Mac 2011 version 14.5.4 and immediately noticed that the vertical scroll with my mouse does not work. They're only going to 'up' (for example, slide 14, 13, 12, 11, 10) or will be stuck between 2 blades.

  I unplugged and replugged my mouse, turned PPT market twice and rebooted my MacBook. No change.

  I know it's early days and these are the pains of growth with the new OS, but I use PPTX constantly.

  Any tips are appreciated.

  Have the same problem. I don't know that this isn't a mouse problem because it happens when I use the touchpad as well.

• Lower right corner resize vertical scroll of trump if configured controls button to appear in the lower corner

  The place of my bottom right of the Firefox window is normally under the lower part of the bar to the right of the horizontal scroll bar and vertical scroll if there. The square is used to click and drag to resize the right side of the window and the substantive limits.

  This is when a web site up its vertical scroll arrow button in the lower right. I can't access the arrow key down with my mouse to cause the page scroll down a few lines at a time because when I point the mouse there, I get the resizing of the controls instead. Even if the arrow button is clearly visible on the screen, the controls resize are supported and I can't use the scroll control.

  Two example web sites display their willingness to arrow down while at the bottom of the window; TIME.com and GMAIL.com. I also saw two PDF documents in the browser, too, I have a vertical scroll bar all the way down and I can not use this button arrow down, because instead I get the North-West-South-East click to resize cursor instead of the mouse pointer when I try to use this button to scroll.

  Someone on the Google Help forum was not able to reproduce this problem, showing me the screenshots of his right lower mouse behavior. But there is no resizing control which covers access to the scroll bar.

  I use the latest Firefox, I have reset Firefox, dumping so all my Add-ons and parameters customized and gave only AdBlock Plus and Cookie Monster. And, when I asked a similar question.

  I'm running Windows XP, on his last days of support. This computer is not able to run something more recent, unless I run with Linux.

  Go to TIME.com, its vertical scrolling is in the lower corner and I get the resizing of the control instead of the mouse pointer arrows when I point the down key. If I disable the page styles on the view menu, I get a useful result that defines the end of the vertical scrollbar above the lower corner. If someone the idea of the style of the page (CSS) creates this problem for me.

  Go to Gmail, turning off styles gives me a useless output of nonsense, so I have to use the current page style.

  Can someone please give me some advice? This forum page has vertical and horizontal scroll above and to the left of the place of the corner down. I have access to all parts of the two scroll bars, as is done on most well-designed pages.

  My window - resize controls are always responsible for the place of the corner down even if vertical scrolling is supposed to be there.

  See also my first formulation of this question: https://support.mozilla.org/en-US/questions/993519

  Please try my extension Remove Resizer 1.1.

• Satellite Z30 - update driver touch pad with adjustable scrolling speed?

  Hello

  touchpad Alps for W8.1 that is currently provided by Toshiba driver doesn't have an option to set the vertical scrolling speed of the gesture two fingers. With the speed by default, even supported the fingers down without moving them results in a scroll that is the equivalent of PAGE_DOWN, for example way to fast. The version I'm using is the most recent site (tpdrv - 20140306120847.zip)

  There is a registry entry in HKEY_CURRENT_USER/Software/Alps/Apoint that make the situation a little more bearable (ScrollLines set to 1), but there is no way to adjust if it more in the settings or the registry

  A newer driver from the Alps (8.103.404.104) from another company has this option and scrolling works as it should on the lowest speed, but it does not support the 2 fingers rightclick.

  Why toshiba is using an outdated driver that is missing this feature critical? Is a new driver available? Anyone find a solution for this?

  Hello

  My knowledge of the laptop manufacturers change and adjust own pilots.
  Driver versions are always different and are not always comparable with versions of driver outputs of other manufacutrers for laptop.

  As you said above:
  published by Toshiba Alps driver does not support the speed of scrolling, but conversely, it supports the right click of 2 fingers.
  The other driver supports scrolling speed option but doesn t support made finger right click.

  It would be nice to have a driver that will support all the options listed.
  So I think that we can just wait and hope that future versions will support some features more nice to have

• Satellite A200 - 14 d: vertical scrolling touchpad works more regularly

  The driver is updated, the touchpad works normally most of the time, but occasionally (very often) the vertical scrolling stops (the bar on the right side of the touchpad) react and it is impossible to scroll vertically. After awhile, he reactivates again and works normally again...

  What is the problem?

  Who knows why this is happening there? :)
  It will be nice to have answer to these recurring issues.

  Have you tried to play a bit with the parameters of virtual scrolling?
  Try to change the scrolling area. Try to expand a bit.

• move the vertical scroll bar in a table

  Hello

  In my VI front panel contains a table of results with the visible vertical scroll bar.  When the program runs a performing a test, I am inserting a line every time the captured result.  The row is inserted in the lower part, and when all the visible lines are met you can not see the final result.  What I want to do is either focus on the last row to move the vertical scroll bar or move programmatically control scrollbar itself.  Is this possible?  If this is not the case, what is the property node that I need to display the last line of a table.  I have inserted the data at the top of the table, but this isn't really what the standard application programs do!

  Thank you

  Martin

  See attachment...

  Dan