AC adapter / CC eh652aa is compatible with nx6125?

Similar Questions

• Dell N5010 network adapter drivers are not compatible with windows 7 (32 bit)

  Hello

  I have laptop dell n5010, I installed windows 7 ultimate (32 bit). but the network drivers are not getting installed on this operating system. demand for the windows 7 or windows vista 64-bit. any solution to this problem?

  http://support.Dell.com/support/downloads/index.aspx?s=DHS&CS=19

  Go to Dell over the link for Windows 7, Drivers etc.

  If Dell does not have them, you're out of luck.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forums.

  There is a list of the Windows 7 Forums at the link above to help you.

  You get the help you need there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• New 12 watts of power adapter compatible with iPad air 2?

  Is the new adapter of 12 watts of power which is delivered as an accessoriy with iPad compatible with iPad Pro 2 air or it will overheat the battery?

  Thank you

  It is very good.  I use my indiscrimantly brick power 12w with my iPad 2 Air and big-screen iPad Pro.  Output one is always in standard USB 5v and the iPad itself will regulate the current in the charging system.  http://www.Apple.com/power-adapters/ the only difference is 2. 1 out of note on the 2 and 10w. 4 a rating on the 12w, but the device regulates what current is used for billing.

• Is my MacBook Pro 15 "end 2013 compatible with Thunderbolt 3 devices (if you are using an adapter)

  I have a MacBook Pro 15 "end of 2013, 16 GB, 1 TB SSD, 2.3 GHz i7 running OS X 10.11.4." My SSD is maxed out so I plan to buy a box 2 Berry drive Thunderbolt and secure it with a 1 TB SSD.

  I know Thunderbolt enclosure 2 still available, but lightning 3 cases are starting to hit the market. I wonder if a Thunderbolt 3 box will be compatible. Because I'll probably replace it the MacBook Pro 12-18 months and I assume - rightly or wrongly - that Apple will adopt 3 bolt of lightning on the MacBook Pro, Mac Pro and iMac during this period, I would prefer Thunderbolt 3 for scalability.

  I am aware that the cables are physically different, and 3 bolt of Lightning has adopted the USB - C standard. My question is: if I buy the cable or a suitable adapter, I'll be able to use a box Thunderbolt 3? (I know there will be no performance difference; however, it is scalability).

  Thunderbolt 3 is backward compatible with earlier versions of Thunderbolt.

• I had one for my Ipod Touch dock adapter model MC540C/a and I wonder if I can get a bluetooth adapter that is compatible with my dock adapter?

  I had a dock adapter (photo attached) for my Ipod Touch model MC540C/A and I wonder if I can get a bluetooth adapter that is compatible with my dock adapter?  Thank you!  Luc Roy

  Just what do you mean?

  MC540C/a is a 4G iPod touch and it has Bluetooth construction

  iOS: supported Bluetooth - Apple Support profiles

• Linksys AE2500 is compatible with Sony adapter to use on a DVD disc Blu - ray BDP-S370 player?

  Linksys AE2500 is compatible with the Sony adapter for use on an of DVD disc Blu - ray player BDP-S370 to connect to a wireless network?

  Hello Jaime,

  Only the UWA-BR100 wireless LAN adapter is supported for use with the Sony BDP-S370 Blu - ray disc drive to connect to a wireless network. Sony has tested the adapter LAN USB UWA BR100 and it is guaranteed to work with the BD player. Adapter USB LAN wireless from other manufacturers may work, but Sony has not tested the and as a result, operations are not guaranteed.

  If my post answered your question, please mark it as an "accepted Solution".

• Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

  Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

  Yes and no.

• VS800UT #ABA: help! What external ac adapter is compatible with the HP Compaq 8000 Elite computer PC VS800UT #ABA

  I have searched for days and have not found much information on the AC adapter that that uses this model

  PC product no. VS800UT #ABA

  [Personal information]

  HP ELITE 8000 PC-ULTRA-SLIM

  I know that this PC uses a power adapter with an intelligent pin and will not work if the model is incorrect, even if the Volt amps and power are correct.

  It did not work. 4 PC beeps 2 second break times 5 average (incompatible) or defective or both.

  

  

  model: 647982-001

  Replace with hp spare: 648964-001

   

  ==

  Based on the selector hp model: 592491-001 is the only listed compatible with my PC model

  the back of my PC just above taken power said 19.5 volts

  [Personal information]

  ==

  It would work?

  I do not have it, it seems to have 592491-001 on it, but as a replacement with model number does that mean a cross between these models compatibility is one thing?

   

  

   

  Thanks in advance.

  G31, welcome to the forum.

  Here is information on HP Partsurfer parts to the United States.  It shows the power adapter.  Thus, it may be that it is still available.  Also, here is the illustrated parts and Service card and hardware reference Guide or the computer.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP envy 17-j130eb: is my HP envy 17-j130eb compatible with a intel dual band 7260 adapter?

  I'm about to buy a new wifi adapter to take advantage of the benefits of my router dual-band.

  I have bin looking online and I could not find known retailers in my area, which offered a card dual band N 7260 of intel, but many who offer the AC adapter version.

  So my question would be is compatible with the adapter, I would like to buy in my laptop?

  Because some Web sites have noted that their adapters do not work on lenovo, hp and other systems.

  Thank you!

  Hello

  Yes. Please use the part number on page 41 of the following book:

  http://h10032.www1.HP.com/CTG/manual/c04091762.PDF

  The manual also shows you how to replace.

  Kind regards.

• a 90-Watt adapter is compatible with elitebook 8560w?

  I need an adapter for my laptop, but when I search online, it gives me a lot of options.  Which is the lighter adapter that works also!

  Hello:

  Here is the link to the service manual for your workstation.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c03137126/c03137126.PDF

  You will find the list of the power adapters compatible with the HP numbers in Chapter 3, page 32.

  An adapter 90 w is not listed as compatible.  120 w is the least recommended power.

  Paul

• bad display wddm is not compatible with the vga adapter

  transparcency is horrible, wddm is not compatible with the vga adapter

  Hello

  1. who is the operating system installed on the system?

  2. do you get an error message?

  Method 1:

  Follow the link and check if the VGA card is compatible. Check if it helps.

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/

  Method 2:

  Follow the link below and install the drivers in compatibility mode. Check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  For more reference: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/problem-with-windows-display-driver-model/a98ccf9a-da4a-465d-bc69-4d0e88470057

  Let us know if it helps.

• Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). Please tell me how to connect...

  Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). I tried parameter as point of access, AD-hoc, Connect automatticaly etc but will not connect... Please tell me how to connect...

  Hi Sumit and thanks for posting.

  Your Athreos has never connected? If it has connected then it not only connects it to insecure networks? Also after can trying to connect you do the following?

  Start, run, CMD, OK to open a command prompt:

  Type the following command:

  IPCONFIG/ALL

  [Note that there is no space between the oblique and ALL bar].

  Right click in the command window and choose Select all, and then press ENTER.
  Paste the results in a message here.

  I hope this helps. After the back if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have Trend Micro antivirus for Windows 7, but I'm told it's not compatible with Mozilla 9.1, how to get an older version or to adapt?

  I use a computer laptop, just reinstalled everything and now have Firefox 9.1 and tells me that is not compatible with my antivirus, Trend Micro Titanium. I am running Windows 7.

  This situation should not come up again with future versions of Firefox. From Firefox 10.0 (to be released Jan 31 Mar) modules will be assumed to be compatible with the new version of Firefox and they will be not disabled, as in the past. Well sure, if an add-on does not work correctly or totally screws to the top of Firefox, it is up to the user to sort only the cottages, with a little help from those of us who provide Firefox support.

• is the latest version of firefox, 27.0.1 compatible with the latest version of Roboform

  I am hesitant to install the latest version of firefox because when I updated previously it was not compatible with Roboform, so I uninstalled and reinstalled the old version I was using before I use Roboform. Has something changed with the compatibility issue?

  Hello askin4me, the addon compatibility always depends on the third-party developer adapting to the latest version of firefox. then you'd have to enquire about roboform on this issue...

• Tecra A4-109: is - this 1 GB PC2-4300 DDR2 memory compatible with this model?

  I've had this laptop model Tecra A4 109 for a year and a half. I need to upgrade its 512 MB of memory by default. http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&action=SHOW_ATTRIBUTES&t ab = 1 & PRODUCT_ID = 102108 & Type = 2319 & family = 2328 & series = 100900 & model = 102108 & x = 98 & y = 14 #1
  from this site, I checked the memory compatible types.

  As this link says "1024 MB (1 GB) memory PC2700 DDR SODIMM (333 MHz), 1 GB PC2 - 4300 DDR2 Memory, 1 GB memory DDR2 PC2-4300" are the compatible memory. (But in the manual of the laptop that is present in the C:\TOOLSCD\manuals, the compatible option only is 1024 MB (1 GB) PC2700 DDR SODIMM (333 MHz) memory).

  I checked a few memories of laptop DDR2 by traders the but they actually wouldn't fit in the memory locations with ease. If I force it to adapt, it can insert into the slot. But there is a chance to have a broken and useless memory. Memory DDR work with 5 volt DDR2 memory work with 2.5 to 4 Volts AFAIK. Of DDR and DDR2 memory slots are also a bit different from each other. Now I'm confused.

  Official web pages of Toshiba says and what I found in the laptop manual are contradictory to each other. Who is telling the truth?

  I'd appreciate the help. Thank you...

  Hello kamel

  I can understand that you are confused, but it is not so complicated. I checked a few pages and here is the result:

  Tecra A4 comes in two different models.
  1 Tecra A4 - PTA40E-xxx (your model). Compatible memory module is 1024Mo PC2700 (PA3313U-2M1G)
  2 Tecra A4 - (PTA42E-xxx). Compatible memory module is DDR2 400/533 1 GB (PA3411U-1M1G)

  As you can see that the two hardware platforms are completely different. Copy the PA3313U-2M1G module. It is compatible with your Tecra.

  Good bye